Used Broderson Ic 80 for sale (125,550)

Condition: used, Year of construction: 2003, Technical details: max. wheel diameter: 80 mm max. module: 3 total power requirement: 25-35 kW weight of the machine ca.: 10 t workpiece weight: 15 kg workpiece length - max.: -50....+450 mm table diameter: 145 mm diameter of hob: 90 mm cutter length max.: 220 mm Pjdpfxewwluns Ag Dsgw hob turning speeds: 1.000 U/min

Condition: good (used), Year of construction: 2008, For sale is 1 Scherer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in the front bearing: 85 mm Diameter in rear bearing: 75 mm Podpjxr A Dtjfx Ag Dsgw 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: used, Year of construction: 1987, Pressure 080 t throat 380 mm stroke 8 - 112 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 472 mm table surface area 840 x 610 mm table height over floor 800 mm passage to the back 520 mm ram surface 650 x 400 mm ram adjustment 70 mm power capacity 7,5 kW weight 6,9 t Dimensions (WxDxH) 1,1 x 2,15 x 3,2 m permitted for manual loading according to the German Safety Regulations (UVV) Pgedpjvuk Snofx Ag Dew with motor, pneumatic clutch/brake combination, mechanical overload protection in ram, tie rods to improve rigidity of the press body, two-hand operation as is where is, WITHOUT putting into operation in our warehouse, WITHOUT electrical cabinet Price for commissioning (with new electric control) on request

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Pedpfsvgbgaex Ag Dogw Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, functionality: fully functional, first registration: 05/2007, Year of construction: 2007, ASTRA VI HD8 64.41-80 with CIFA 35m concrete pump First registration: 22-05-2007 – Euro 5 Km: 295,063 Pgjdoxztakopfx Ag Dsw Operating hours: 5,485 4 axles CIFA K35XZ – PA1006 – 35m equipment Tyres: 50/60% Valid inspection Good condition Available immediately WE CONSIDER TRADE-INS OF VEHICLES FROM ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: excellent (used), Drawer cabinet with three telescopic drawers and doors width 550 mm depth 660 mm height 710 mm 1 drawer : 50 mm internal height 80 mm inner height 110 mm internal height 1 drawer Pjdpfx Agoit I Rho Dogw

Condition: used, Year of construction: 1998, pressure 80 t throat 335 mm stroke 8 - 100 mm no. of strokes 60/90 Hub/min table surface area 900 x 670 mm hole in the table 280 x 200 mm dayligth max. 450 mm ram adjustment 80 mm ram surface 700 x 450 mm tool dimension, max 700 x 450 mm weight of tools max. 140 kg total power requirement 11,07 kW Podpfx Agjuild Ao Dsgw weight of the machine ca. 6,5 t dimensions of the machine ca. BxLxH 1,72 x 2,0 x 2,82 m

Condition: good (used), Year of construction: 2004, For sale are 2 pieces of shearer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Pgodpfxsxr A Dgs Ag Dsw Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: used, Year of construction: 1989, Pressure 080 t throat 300 mm stroke 8 - 140 mm no. of strokes 60 / 90 /min distance table/ram, max. stroke up, adjustment up 420 mm table surface area 800 x 600 mm hole in the table 330 x 230 mm table adjustable 230 mm table height over floor 750 - 980 mm ram surface 600 x 240 mm ram adjustment 100 mm power capacity 4,5 / 6,9 kW Weight 5,5 t Dimensions (WxDxH) 1,4 x 2,5 x 2,6 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual central lubrication, two-hand and foot operation Pjdpfx Asvuuavjg Degw press can be inspected in running condition in our warehouse

Condition: good (used), Year of construction: 2012, Matec 30 L, Year of manufacture 2012, Heidenhain iTNC 530 control, X/Y/Z travel 1300/600/700 mm, Spindle speed up to 12,000 rpm, HSK 63-A spindle mount, Electric handwheel, 20 bar internal coolant supply, Paper belt filter, 80-way water coolant supply, Fully enclosed work area, Direct measuring systems, Chip conveyor, Bellows with steel blades, Pgedpfx Agow Uf Ize Dow 3D measuring probe, Laser measuring device

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: P-1843, actuation type: hydraulic, controller model: Siemens Sinamics G110, bending force (max.): 80 t, overall weight: 5,500 kg, TECHNICAL DETAILS Psdpjxlthcjfx Ag Djgw Bending force: 80 t Lowering speed: 80 mm/s Safety distance: 1,500 mm MACHINE DETAILS Control: Siemens Sinamics G110 Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,150 x 2,700 mm Machine weight: 5,500 kg IP protection class: 54

Condition: good (used), Year of construction: 1994, functionality: fully functional, planing width: 800 mm, height adjustment type: electric, overall weight: 1,600 kg, planing height: 200 mm, number of planer blades: 4, Equipment: motor brake, Year of manufacture: 1994 Planing width: 800 mm Maximum planing height: 200 mm Number of knives: 4 Minimum workpiece length: 500 mm Minimum planing height: 5 mm Speed: 4,500 rpm Pgsdpfxewma N Sj Ag Dow Table length: 1,100 mm Number of feed rollers: 1 Main motor: 11 kW Maximum feed: 32 m/min Infinitely variable feed: Yes Table rollers: Yes Digital thickness display: Yes Sectional pressure roller: Yes Electric height adjustment: Yes Cutter shaft: Centrifugal shaft Centrifugal shaft: Tersa Outfeed: Steel roller Total power: 16 kW Approx. weight: 1,600 kg Space required (length): 1.2 m Space required (width): 1.65 m Space required (height) : 1.8 m

Condition: good (used), Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, heavy-duty trailers -Platform: 11,000/3000/H1100 mm -Load capacity: 100 tons -Steering: possible on both sides -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel size: 646/200-480 Pgodpfx Ajrd Aclog Dsw -Dimensions total: 12,300/3000/H1100 mm -Weight: 12960 kg -Handover: in the current condition as viewed -Note: Pay attention to the condition of the wheels

Condition: reconditioned (used), Year of construction: 2008, Nominal Press Force: 800 kN Ram Stroke, adjustable in steps: 30...120 mm Ram Adjustment: 100 mm Throat Depth: 300 mm Stroke Rate at Idle: 70 / min Continuously Adjustable Stroke Rate: 40 - 130 /min Die Height at Maximum Stroke (bottom) and Adjustment (top): 400 mm* Table Clamping Surface (W x D): 1,200 x 600 mm Ram Clamping Surface (W x D): 600 x 450 mm Ram Bore (pin bore): 50 H7 mm Main Motor Power: 7.5 kW Approx. Machine Height: 3,250 mm Machine Weight: 7,500 kg - With hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest UVV (accident prevention regulations) - With Siemens S7/300 control, touch operation on movable operator panel - Two-hand operation, stroke gate protected by limit switches - Centering groove Psdpow Ec A Esfx Ag Dogw - Roller feed: Servo 300 (strip width 300 mm, strip thickness: 4 mm, cross-section: 1000 mm²) - Roll block strips - Anti-vibration feet

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm Pedpfx Aovut Npsg Dogw dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: new, pressure 80 t stroke 400 mm table surface area 920 x 540 mm Motor output 2,2 kW liter capacity 9,0 l dayligth 800 mm tank capacity 31 l daylight between the columns 920 x 300 mm weight of the machine ca. 0,725 t dimensions of the machine ca. 1,45 x 0,85 x 2,45 m Pgedpevu E T Hsfx Ag Dew Hand and Motor operated. Side-sliding cylinder.

Condition: good (used), Pressing force 200 to table: 1500x1000 mm motor: 45 kW weight: 18000 kg Stand width:1500mm Podpsgvz Hxofx Ag Djgw dimensions: Machine: 5500x2610x2150 mm

Condition: used, Drive motor, DC servo motor LENZE type GFQBT 80-24 Spindle motor, electric motor, main spindle motor Serial no. 184592 Year of construction: 1993 Rated power: 4.2 kW Operating voltage: 260 V DC Pedpstpkx Nofx Ag Dogw Rated current: 20 amps Maximum speed: 3000 rpm Excitation voltage: 200 V DC Excitation current: 1.15 amps - Electric brake Shaft diameter: 24 mm (shaft with 8 mm feather key) Shaft length: approx. 47 mm (shaft protrusion from centering edge) Centering flange diameter: 110 mm Bolt circle diameter: 130 mm, 8 x M8 thread - Encoder, speedometer, GBR 190V Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Output current: 67 mA (max. 200 mA) Speed max. 9000 rpm External fan LENZE (EBM) type G2E 120 Mains connection: 230 V, 50 Hz, 0.32 A, 0.075 kW Overall length: 630 mm (without shaft and centering flange) Overall dimensions L x W x H: 690 x 340 x 430 mm Weight: 45 kg good condition

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Knorr-Bremse, pneumatic cylinder type DU-80/100 -Stroke: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 20 mm Psdpjxayvcefx Ag Djgw -Hole: Ø 18 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 315/100/H100 mm -Weight: 4.2 kg/piece

Condition: used, Year of construction: 2023, load capacity: 8,000 kg, lifting height: 4,490 mm, fork length: 1,800 mm, total length: 5,310 mm, - Bedienung: Sitzgerät - Tragfähigkeit/Last: 8000 kg - Lastschwerpunktabstand: 900 mm - Achslast mit Last vorn/hinten kg 21306/2124 - Achslast ohne Last vorn/hinten kg 7097/8333 - Spurweite vorn/hinten mm 1561/1432 - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/8 ° - Höhe Hubgerüst eingefahren 2710 mm - Kupplungshöhe mm 520/670 - Gabelträger ISO 2328, Klasse/Typ A, B ISO IV A - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4999 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 5199 - Wenderadius mm 3049 - Kleinster Drehpunktabstand mm 877 - Fahrgeschwindigkeit mit/ohne Last km/h 14/17 // 18/20 4 Psdpfxsxd Hlls Ag Dsgw - Hubgeschwindigkeit 5 mit/ohne Last m/s 0,28/0,37 // 0,36/0,48 - Senkgeschwindigkeit 5 mit/ohne Last m/s 0,53/0,42 - Zugkraft mit/ohne Last N 27997/28295 - max. Zugkraft mit/ohne Last N 44000 - Steigfähigkeit mit/ohne Last % 15,5/22,5 - Max. Steigfähigkeit mit/ohne Last % 16,0/23,0 - Beschleunigungszeit (15 m) 5 mit/ohne Last s 7,9/6,8//6,9/6,1 - Betriebsbremse Mechanisch/hydraulisch - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43536 A - Batteriespannung V 80 - Batteriekapazität K5 Ah 1120 (-1240) // 1085 - Energieverbrauch 45 VDI-Arbeitsspiel/Stunde kWh/h 17,7 - Umschlagleistung 5 t/h 456 // 476 - Energieverbrauch bei Umschlagleistung kWh/h 17,2 // 21,9 - Arbeitsdruck für Anbaugerät bar 250 - Ölstrom für Anbaugeräte l/min 60 - Schalldruckpegel LpAZ (Fahrerplatz) 2 dB(A)

Condition: used, Year of construction: 1977, pressure 080 t throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm Psdpfx Asvut E Rsg Djgw ram surface 560 x 300 mm ram adjustment 80 mm power requirement 7,5 kW weight 8,0 t dimensions (WxDxH) 1,6 x 2,3 x 3,3 m permitted for manual put-in according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 2023, load capacity: 8,000 kg, lifting height: 4,500 mm, fork length: 1,800 mm, total length: 5,360 mm, - Bedienung: Sitzgerät - Tragfähigkeit/Last: 8000 kg - Lastschwerpunktabstand: 900 mm - Achslast mit Last vorn/hinten kg 21306/2124 - Achslast ohne Last vorn/hinten kg 7097/8333 - Spurweite vorn/hinten mm 1561/1432 - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/8 ° - Höhe Hubgerüst eingefahren 2710 mm - Kupplungshöhe mm 520/670 - Gabelträger ISO 2328, Klasse/Typ A, B ISO IV A - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4999 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 5199 - Wenderadius mm 3049 - Kleinster Drehpunktabstand mm 877 - Fahrgeschwindigkeit mit/ohne Last km/h 14/17 // 18/20 4 Podpfxexd Hf Ej Ag Dogw - Hubgeschwindigkeit 5 mit/ohne Last m/s 0,28/0,37 // 0,36/0,48 - Senkgeschwindigkeit 5 mit/ohne Last m/s 0,53/0,42 - Zugkraft mit/ohne Last N 27997/28295 - max. Zugkraft mit/ohne Last N 44000 - Steigfähigkeit mit/ohne Last % 15,5/22,5 - Max. Steigfähigkeit mit/ohne Last % 16,0/23,0 - Beschleunigungszeit (15 m) 5 mit/ohne Last s 7,9/6,8//6,9/6,1 - Betriebsbremse Mechanisch/hydraulisch - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43536 A - Batteriespannung V 80 - Batteriekapazität K5 Ah 1120 (-1240) // 1085 - Energieverbrauch 45 VDI-Arbeitsspiel/Stunde kWh/h 17,7 - Umschlagleistung 5 t/h 456 // 476 - Energieverbrauch bei Umschlagleistung kWh/h 17,2 // 21,9 - Arbeitsdruck für Anbaugerät bar 250 - Ölstrom für Anbaugeräte l/min 60 - Schalldruckpegel LpAZ (Fahrerplatz) 2 dB(A)

Condition: used, Year of construction: 2021, load capacity: 8,000 kg, lifting height: 4,215 mm, total length: 6,550 mm, · Lastschwerpunktabstand 900 mm · Sitzhöhe, EGO-Kabine 1440 mm · Lastabstand 760 mm · Spurweite (c-c), vorn – hinten 1500 – 1360 mm · Wenderadius, außen 3700 mm · Wendradius, innen 300 mm · Höhe bei Kabinenneigung, max. EGO-Kabine 3020 mm · Breite bei Kabinenneigung, max. EGO-Kabine 3225 mm · Min. Gangbreite für 90°-Stapelung 6450 mm · Hubhöhe 3500 mm · Mastneigung, vorwärts – rückwärts a – ß 6-9 Grad · Achslast vorn Ohne Last 5500 kg · Achslast vorn mit genormter Last 18400 · Achslast hinten Ohne Last 6200 kg · Achslast hinten mit genormter Last 1300 · Bremsen Abmessungen, vorn – hinten 8,25-R15 – 8,25-R15 tum · Luftdruck, vorn – hinten 1,0 – 1,0 MPa · Lenksystem Typ – Steuerung Hydraulikservo Lenkrad · Betriebsbremsanlage Typ – gebremste Räder: Ölgekühlte Lamellenbremsen – Antriebsräder Psdpfx Aexd Hfrog Dsgw · Feststellbremsanlage Typ – gebremste Räder Trockene, gefederte Scheibenbremse – Antriebsräder · Hydraulikdruck Max. 20 MPa · Hydraulikölmenge 155 l · Antriebsachse – Typ Differential- und Nabenreduzierung · Fahrmotor, Stundenleistung 2 x 11 kW · Geschwindigkeitsüberwachung, Prinzip – Stufen: Hochfrequenz MOSFET, AC – Stufenlos · Pumpenmotor Hydraulik, Arbeitszyklus – Lastverhältnis: 1 x 42 kW – S3 15% · Pumpenmotor Bremsen, Arbeitszyklus – Lastverhältnis 1 x 4,2 kW – S3 15% · Pumpenüberwachung, Prinzip – Stufe Hochfrequenz MOSFET, AC – Stufenlos · Hubgeschwindigkeit ohne Last 0,32 m/s · mit genormter Last 0,31 m/s · Senkgeschwindigkeit ohne Last 0,45 m/s · mit genormter Last 0,50 m/s · Fahrgeschwindigkeit, F/R ohne Last 15 km/h · mit genormter Last 13 km/h · Steigfähigkeit, max. ohne Last 37 % · mit genormter Last 21 % · Steigfähigkeit, bei 2 km/h ohne Last 29 % · mit genormter Last 16 % · Zugkraft 40 kN

Condition: new, Year of construction: 2023, load capacity: 8,000 kg, lifting height: 4,500 mm, fork length: 1,800 mm, total length: 5,360 mm, - Bedienung: Sitzgerät - Tragfähigkeit/Last: 8000 kg - Lastschwerpunktabstand: 900 mm - Achslast mit Last vorn/hinten kg 21306/2124 - Achslast ohne Last vorn/hinten kg 7097/8333 - Spurweite vorn/hinten mm 1561/1432 - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/8 ° - Höhe Hubgerüst eingefahren 2710 mm - Kupplungshöhe mm 520/670 - Gabelträger ISO 2328, Klasse/Typ A, B ISO IV A - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4999 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 5199 - Wenderadius mm 3049 - Kleinster Drehpunktabstand mm 877 - Fahrgeschwindigkeit mit/ohne Last km/h 14/17 // 18/20 4 - Hubgeschwindigkeit 5 mit/ohne Last m/s 0,28/0,37 // 0,36/0,48 - Senkgeschwindigkeit 5 mit/ohne Last m/s 0,53/0,42 - Zugkraft mit/ohne Last N 27997/28295 - max. Zugkraft mit/ohne Last N 44000 - Steigfähigkeit mit/ohne Last % 15,5/22,5 - Max. Steigfähigkeit mit/ohne Last % 16,0/23,0 - Beschleunigungszeit (15 m) 5 mit/ohne Last s 7,9/6,8//6,9/6,1 - Betriebsbremse Mechanisch/hydraulisch - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43536 A - Batteriespannung V 80 - Batteriekapazität K5 Ah 1120 (-1240) // 1085 - Energieverbrauch 45 VDI-Arbeitsspiel/Stunde kWh/h 17,7 - Umschlagleistung 5 t/h 456 // 476 - Energieverbrauch bei Umschlagleistung kWh/h 17,2 // 21,9 - Arbeitsdruck für Anbaugerät bar 250 Pgedpfxsxd E Ewj Ag Dsw - Ölstrom für Anbaugeräte l/min 60 - Schalldruckpegel LpAZ (Fahrerplatz) 2 dB(A)

Condition: used, Year of construction: 2016, load capacity: 8,000 kg, lifting height: 3,130 mm, total length: 4,940 mm, Electric forklift Linde E 80-01/900 Drive Electric Pedoxd E Acepfx Ag Dogw Year built 2016 Lifting height (mm) 3,130 Lifting weight (kg) 8,000