Used Lh 54 for sale (3,836)

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Kdedpfx Ansy Dcivowen Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 400 mm, number of axes: 5, This 5-axis Wenzel LH 54 CMM machine was manufactured in 2003. It features a measuring range of 500 mm in the X-axis, 1000 mm in the Y-axis, and 400 mm in the Z-axis. The machine includes a granite structure base, air bearing guideways, and a portal design, making it suitable for quality assurance and series production applications. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 54 CMM machine we have for sale. Contact us for further details. • Condition: completely checked and retrofitted; new software • Machine design: granite structure base; air bearing guideways; portal design • Applications: quality assurance; series production • Availability: currently powered and available for demonstration • Calibration/verification: factory calibration certificate available; determination of length measurement uncertainty, probing uncertainty, and repeatability range • Measuring range: maximum space diagonal 4660 mm • Measurement uncertainty: E0 = 2.5 + L/300 µm • Controls and software: controller WPC2040 Basic; installed software WM Quartis R2026-1 • Probe system: TP20; probe head PH10T; probe head interface PHC10-3 PLUS; probe interface PI200 Combi; joystick HT400 • Options and services: measurement program creation for customer parts available; optional upgrade with Renishaw SP25M probe system (additional hardware and service included with upgrade); additional software modules on request; custom accessories and fixturing systems available Additional equipment Kdsdpfoyxqfusx Anwsn • PC system with Windows 11 (compliant with current Wenzel requirements) and WM Quartis R2026-1 installed • 2 × 24" TFT monitors (new) • Mouse and keyboard • Probe change rack MCR20 (unpopulated/empty) • 1 × TP20 Standard Force Module • Stylus kit M2

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm daylight 650 mm Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software Kdjdpfjt Hw S Isx Anwjn

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Kedpfx Anjw H Auqewjdn

Condition: like new (used), This type of machine is suitable for dispensing the following products: mustards, baby food, sauces, pastes, jams, etc. Ksdozbi Ewopfx Anwsdn With their filling device, these machines are equipped for dispensing viscous products. The output varies depending on the product, format, and filling capacity. Features: Spindle feed.

Condition: ready for operation (used), LH SOGEV / LEYBOLD-HERAEUS Membranovac 1VS pressure gauge, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Kdodpfx Aoi Ebyksnwon

Condition: used, Year of construction: 2025, machine/vehicle number: LH202501080228, Weight 560 kg, output 8.7 kW; NOTE: The wheel loader is located at a construction yard on Wankelstraße, 41352 Korschenbroich, Germany! Kedoy Rvqaopfx Anwedn

Condition: used, mileage: 454,000 km, power: 324 kW (440.52 HP), first registration: 10/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2012, Equipment: ABS, air conditioning, crane, MERCEDES ACTROS 2544 HOOKSYSTEM + CRANE Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2012 ? MILAGE: 454 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? AIRCONDITION ? ENGINE BRAKE ? POWER STEERING ? TACHOGRAPH CAPACITY: 12 000 kg TOTAL WEIGHT: 26 000kg WHEELBASE: 480/135 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR Kodpfx Anjv Shq Newjdn CRANE: LHO L190Z (78) TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 88597

Condition: used, Manufacturer: EuroProjet - Studio 54 Model : Armadio Oasis 1400 Type : Refrigerated cabinet Material: 304 stainless steel Capacity : 1315 L Working temperature: +2°/+8°C Digital temperature control Inside dimensions : W 54 x H 150 x D 70 cm Ksdpjx R Dhtjfx Anwedn Outside dimensions : W 145 x H 205 x D 85 cm Weight: 300 kg

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Ksdoy E Expepfx Anwsdn Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: used, Centrifugal fan, dust extractor, fan, exhaust, dust fan, welding fume extractor -Motor power: 0.65 kW -Speed: 2840 rpm -max. volume flow: 0.41 m³/h Kdedpfxecuauyj Anwen -max. pressure: 804 kp/m² -Connection input: Ø 65 mm -Connection output: Ø 62 mm -Impeller: Ø - mm -Connection: 400 volts -Dimensions: 580/540/H450 mm -Weight: 30 kg

Condition: used, Year of construction: 2001, machine/vehicle number: 20010329, Offer 17500 Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm distance approx. 200 mm - Arm diameter approx. 50 mm - Double stroke cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm Kdedpev Eak Iofx Anwjn - Arm distance approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg

Condition: used, functionality: fully functional, machine/vehicle number: 6412185, Year of construction: 2016, operating hours: 1,547 h, load capacity: 2,000 kg, fuel type: electric, construction height: 1,300 mm, fork length: 1,150 mm, drive type: Elektro, Low lift truck Kjdpfx Anovthuqswjdn Chassis number: 6412185 Condition: Ready for use and fully functional Technical condition: good Description: BT LWE 200 No.: R0513 Year of manufacture: 2016 Operating hours: 1,547 Devices are sold without UVV and in their current condition! Charger on request. Fast and uncomplicated transport possible by arrangement! The advertisement is only for identifying the device! A precise description of the condition and possible equipment is provided individually on request! Errors and prior sale reserved, sale only to traders.. all sales of used goods are made without warranty and/or guarantee. If you have not found your forklift, contact us. We have a large selection of other devices on site. Initial lift, Initial lift

Condition: used, functionality: fully functional, machine/vehicle number: W40155B01081, Year of construction: 2011, operating hours: 2,154 h, load capacity: 2,000 kg, fuel type: electric, construction height: 1,350 mm, fork length: 1,200 mm, drive type: Elektro, Low lift truck Fahrgestellnummer: W40155B01081 Condition: Ready for use and fully functional Technical condition: good Description: Still EXU 20 No.: M0570 Year of construction: 2011 Operating hours: 2,154 The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found the stacker you are looking for, please contact us. We have a large selection of other trucks on site. Initial lift, Kedpfx Aeuhxw Hsnwsdn

Condition: used, Wyremontowany i nieużywany od czasu remontu mieszalnik typu Z produkcji Winkworth model 16Z-63. Wykonanie ze stali kwasoodpornej - części kontaktowe z produktem wykonane ze stali 316/316L. Komora mieszania ma wewnętrzne wymiary: 400 mm x 400 mm x głębokość 350 mm. Pojemność całkowita ok 54 l. Pojemność robocza w zakresie od 36 do 27 l. Ksdpfx Aeymazajnwedn Komora jest obłożona płaszczem grzewczym ze stali ko (304/304L) przeznaczonym do pracy na ciśnieniu do 3.5 bar i temperaturze do 150 C. Mieszalnik posiada dwa mieszadła typu "Z" napędzane przez przekładnię silnikiem el. 4 kW, 1464/37 obr/min, 3/50 Hz. Mieszalnik jest wyposażony w pokrywę ze stali ko, przeznaczoną do pracy na próżni, zamykaną na klamry. Rozładunek przez mechaniczny przechył komory. W zestawie z maszyną - chiller ICS Cool Energy Ltd model iC220 oraz panel sterowania do mieszalnika i chiller'a.

Condition: excellent (used), Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Chiaravalli, worm gear motor -Speed: 54 rpm Kodpfxsx Rw H Nj Anwsdn -Transmission: Type CBFV040 i 25 -Engine: Type CHT 63C4 B14 0.22 kW -Protection class: IP 55 -Hollow shaft: Ø 18 x 78 mm -Quantity: 1x geared motor available -Price: per piece -Dimensions: 315/118/H155 mm -Weight: 7 kg/pc.

Condition: new, Heidenhain LC 182 length measuring rod ML 2240 mm, . 387092-54 , SN:21990823L , unused in original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ksdpfx Anei Eak Eswodn

Condition: ready for operation (used), Siemens 1FT5066-0AC01 3-phase permanent magnet motor, serial number: E 7G10 7041 54 027, used, in good condition, 100% functional, scope of delivery as per photos Kdsdpfx Ajw D Ndgenwon

Condition: ready for operation (used), Heidenhain ROD 250 6000 . 213 116 54 S.Nr. 3 968 067 D, cable length 1 meter, used, with minor signs of wear, 100% functional. Delivery scope as per photos. Kodjx Er Rxspfx Anwedn

Condition: ready for operation (used), Jenaer SLML2S080P-2415-LH-X2-143 SN:1707VS725742, used, normal signs of use, 100% functional, scope of delivery as per photos Kdedpfxoi D Iyao Anwsn

Condition: new, Baumüller BUM62T -75/97.5-54-M-010 Built-in single power unit , unused, 100% functional Kodsi D T Hqspfx Anwsdn

Condition: excellent (used), power: 190 kW (258.33 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 10,650 h, Year of manufacture: 2017 Drive: Wheeled Number of cylinders: 4 Unladen weight: 65,000 kg Superstructure brand: LIEBHERR LH 60 M LITRONIC CE marking: yes Technical condition: very good Optical condition: very good LIEBHERR LH 60 M LITRONIC MATERIAL HANDLER – YEAR OF MANUFACTURE 2017 – 20 M REACH For sale is a powerful and excellently equipped Liebherr LH 60 M Litronic material handler from 2017, ready for immediate use in scrap, recycling, port, and bulk material handling. This reliable machine offers an impressive reach of 20 meters and is powered by a powerful Liebherr D944 A7-04 engine with 190 kW (258 hp). The robust undercarriage with 4-point support provides maximum stability, while the hydraulically elevating cab ensures excellent all-round visibility and high operating comfort. Equipped with an industrial straight boom Z1 of 9.10 m and an industrial, heavily angled stick of 6.80 m, this machine is ideal for demanding handling operations. Includes a 5-tine grapple and a multi-shell grapple with a capacity of 1.10 to 1.70 m³. Technical data Manufacturer / Model: Liebherr LH 60 M Litronic Year of manufacture: 2017 Operating weight: 65,000 kg Reach: 20.0 m CE certified Engine: Liebherr D944 A7-04 Power: 190 kW / 258 hp Wheelbase: 3.40 m Ground clearance: 47.5 cm Undercarriage width: 3.53 m 4-point support Hydraulically elevating cab Kedpfxjzdb Dqe Anwedn and 4th hydraulic function Industrial straight boom Z1 – 9.10 m Industrial, heavily angled stick – 6.80 m 5-tine grapple Multi-shell grapple 1.10 – 1.70 m³ Highlights ✔ 20-meter working reach ✔ Powerful and reliable Liebherr engine ✔ Hydraulically elevating cab for optimal visibility ✔ Including grapple equipment ✔ CE-certified machine ✔ Stable 4-point support ✔ Ready for immediate use ✔ Ideal for scrap, recycling, port, and bulk material handling Ready for Immediate Use The machine is in good working condition and ready for immediate use. For further information, photos, or to arrange a viewing, please do not hesitate to contact us. We speak German We speak English Hablamos Español

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Kjdpfsvk Scgsx Anwsdn Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Kedpepq If Djfx Anwedn Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Kedpfx Anjpgkmwjwedn Location: Ex stock 54634 Bitburg - immediately available -