English
German German German English English French French Spanish Spanish Italian Polish Russian Belarusian Dutch Ukrainian Estonian Turkish English English English Czech Danish Finnish Swedish Norwegian Bokmål Maltese Luxembourgish Greek Lithuanian Latvian Kazakh Icelandic Portuguese Portuguese Spanish Spanish Hungarian Slovak Romanian Romanian Slovenian Serbian Serbian Albanian Croatian Bulgarian Macedonian Bosnian Hebrew Arabic Hindi English Indonesian Korean Japanese Thai Malay Vietnamese Chinese Chinese Persian Bengali Pashto Urdu

280 sx for sale

Identified location: Ashburn (US) (Edit)
4
Ahaus, Germany Germany
dealership location
6359 km
used
cutting diameter 250 mm saw band length 2.950 x 27 x 0,9 mm table height 800 mm vice 290 mm Ben9acvzc8 band speed 36 / 72 m/min capacity 45 degrees: flat 120 x 160 mm capacity 45 degrees: round 150 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 120 x 130 mm capacity 90 degrees: square 230 x 230 mm capacity 90 degrees: flat 280 x 200 mm total power requirement 1,5 / 1,8 kW more
8
Velen-Ramsdorf, Germany Germany
dealership location
6362 km
1998
used
cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 60 degrees: round 110 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 27 x 0,9 mm engine output 1,5/1,8 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,4 x 1,35 x 1,7 m Cjzvbutu more
4
Westhafenstraße, 13353 Berlin, Deutschland Germany
6728 km
ready for operation (used)
-Band saw blade dimensions 2950 x 27.0 x 0.9 mm -maximum clamping possibility 325 mm -Adjustable miter left to 60 ° right and 45 ° -Section - 90 ° round 250 mm square 240 mm flat 280 x 200 mm -45 ° li + re around 230 mm flat 180 x 110 mm Bb989fnuxv -Drive: 400 V / 1.5 / 1.8 kW -Coolant system -Weight approx. 450 kg -Space requirement approx. B 1400 x H 1650 X 1350 mm more
1
Berlin, Germany Germany
dealership location
6731 km
1998
ready for operation (used)
Cutting speed: 36-72m/min, saw band dimensions: 2950x27x0,9mm, connected load: 3.8kW, cutting range round/ square/ rectangular 0°: 250/ 230x230/ 280x200mm, 45° left: 190/ 180x180/ 180x210mm, 60° left: 120/ 120x120/ 120x130mm, 45° right: 150/ 130x130/ 120x160mm. Bdkgeminnn more
In very good condition. X07vinocv more
ENGINE SERVICED AND REWOUND BY OUR WORKSHOP, FLANGED B5, 6 MONTHS WARRANTY Klhkd0dn more
7
Velen-Ramsdorf, Germany Germany
dealership location
6362 km
2000
used
cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 60 degrees: round 110 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 27 x 0,9 mm engine output 1,5/1,8 kW Cxogky7 weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,4 x 1,35 x 1,7 m more
LYISH Rewinder for Toilet paper and Hand towel rolls, Standard pyramid pattern for max volume. Rolls are perforated to length of 115mm (can be adjusted) Rolls length setting on PLC screen. The rolls are sealed with glue line and tail cutting. Specifications: - Rewinding speed (max.) 350 m/min - Paper width – 2.75 m (Max) - Parent reel dia. – 1.25 m (Max) - Product dia. 350 mm (max.) - Pneumatic lifting arms for jumbo roll - Paper grade 17-45 g.s.m. single or double ply - Perforat... more
5
Leicestershire, United Kingdom United Kingdom
dealership location
5824 km
2007
ready for operation (used)
Serial No. 708080 Capacity 280 mm Input 400/3/50 2.2 kW Nnjir Speeds 20 - 100 m/min Fitted with roller type feed vice, 500mm length stop. Length 1.8 m Width 1.05 m Height 1.25 m Nett weight actual. 650 Kgs / 0.64 Tons more
Mounting plate with T slots and cross table, plate field, welding tables, welding table, Plattenbohrwerk, T-Groove plate -T - Groove plate comes from a wanderer milling machine type KFH401 Travel approx. 1000 mm Width 400 mm Length 2000 mm Height 330 mm Thickness mm Table height mm Plate is solid -Keyway width mm Dimensions 2280/430/H330 mm Weight 934 kg Bb2dmyic more

New machines via email!

Yes, send news from this list to my inbox!
Stay updated!
You can create a label.
How often do you want to be notified about new listings?
turning length 800 mm Ju93ky turning diameter over bed 280 mm turning diameter over slide rest 140 mm turning speeds 26 - 2.000 U/min range L-W-H 1.510x450x1.190 mm more
turning diameter over bed 590 mm turning diameter over slide rest 380,350 mm turning length 2000 mm centre height 280 mm bed width 490 mm spindle bore 81 mm spindle turning speed range 18, von 19-950 U/min total power requirement 11 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 4,51 x 1,76 x 1,58 m Condition: ready for operation Electric 380 Volt Ptxnh3 3-jaw chuck Forkardt F 315 Rapid transfer-steel holder with div. applications Machinelight Cooling equipment M... more
4
Omagh , United Kingdom United Kingdom
5362 km
2007
good condition (used)
2007 Barford SX9000 9 Ton Dumper c/w Roll Bar Bfp0pz8rsr This machine will be sold by Euro Auctions at an unreserved auction in Dromore, NI on 1st-2nd November 2019 at 9am. To view full inventory or for more information please visit our website. more
Hirschmann OCTOPUS OS20-002800T5T5T5-TBBY999GMSE3S Ethernet Switch, serial number according to photo, used, normal traces of use, 100% functional, supplied photos Stfwo0 more
Vehicle data - make: BT - type: PES 200 D / / initial lifting / 2803 h / HH 1860 mm - type of drive: electric - load capacity: 1000 kg - load Centre of gravity:-lifting height: 1860 mm - range: 0 mm - year: 2011 - operating hours: 2803 - internal No.: C0417 9seubsyho _____ Mast data - mast type: standard - height: 1860 mm - height: 1450 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 14... more
Measuring stand, stand, dial gauge holder, dial gauge, test stand, dial gauge holder, precision measuring, Precision measuring Clamping plate 290 mm -Max intermediate size 280 mm 299/320/H355 dimensions mm P3lwov Weight 22 kg more
4
Cloppenburg, Germany Germany
dealership location
6393 km
2017
ready for operation (used)
Description: InfiniteFocus is a highly accurate, fast and universal 3D optical surface measuring device for shape and roughness. The stable technology of focus variation in combination with the vibration-insulated structure enables the measurement of shape and roughness even on large, heavy components. Bflb8zfdkx Technical data: Travel in Z 100 mm motorized, travel in X Y 200mm x 200mm (motorized) - Motorized turret for 6 lenses, Integrated digital controllable polarization option, IF-RibSet Hi... more
saw blade diameter 350 mm cutting diameter 120 mm speeds 1700/3400 U/min dimensions of saw-blade 350 x 32 mm Max. opening of wise 180 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: square 100 mm capacity 45 degrees: flat 135 x 60 mm weight of the machine ca. 160 kg dimensions of the machine ca. 8 x 0,7 x 1,23 m Condition: good CE signed Condition: ready for operation Electric 380 Volt Approach rolling table 4,5 mm Roller conveyor with ... more
4
Omagh , United Kingdom United Kingdom
5362 km
2007
good condition (used)
2007 Hitachi ZX280LC-3 800mm Pads, CV, Piped c/w Demo Cage, Reverse Camera, A/C No9p2 This machine will be sold by Euro Auctions at an unreserved auction in Dromore, NI on 1st-2nd November 2019 at 9am. To view full inventory or for more information please visit our website. more
3
Bruchsal-Büchenau, Germany Germany
6593 km
1970
excellent (used)
L+Z Drehmaschine Weiler LZ 280 04-03-109 Lieferzeit: sofort Nummer: 04-03-109 Bi7umh9k Maschinendaten Baujahr: 1964 L x B x H: ca. 1500 x 600 x 1200 mm Gewicht: ca. 600 kg Sehr guter Allgemeinzustand Technische Daten Dimensionen: Max. Drehdurchmesser über Bett: ca. Ø 280 mm Max. Drehdurchmesser über Support: ca. Ø 155 mm Max. Drehlänge: ca. 800 mm Stangendurchlass: ca. Ø 24 mm Spindel: Drehzahlbereich: ca. 15 – 3550 U/min Reitstock: MK 2 Zubehör ... more
12
Kaiserslautern, Germany Germany
dealership location
6526 km
2006
ready for operation (used)
General Data Measurements width 1470 mm Measurements depth 3092 mm Measurements height 3062 mm Control Unit Brand Mitsubishi Model MEDALS 60/60S Main Drive Spindle speed range 15000 rpm Number of axis 4 (3 axis in spindle + 1 axis in table to mill two sides) Be9im7rwh2 Movement X-Axis Movement 500 mm Y-Axis Movement 300 mm Z-Axis Movement 400 mm Table Outer length 700 mm Outer width 340 mm This DMG Mori Seiki ULTIMILL V-3000/MSX-850 Vertical Machining Center was manufactured in 2006. Equi... more
Gear motor, electric motor, three-phase motor 29p8eiujm Manufacturers gear North type 52F-R280U-160L/4 Manufacturers Motor North type SK160L/4TW Power 15 kW speed 109-923 R/min Diameter shaft Ø 55 mm 110 mm lenght Ip55 protection Dimensions 980/820/H400 mm Weight 238 kg more
Pressure:80 t throat:280 mm stroke:20 - 120 mm no. of strokes:42 - 125 /min distance table/ram, max. stroke up, adjustment up:510 mm table surface area:700 x 560 mm hole in the table:280 mm table height over floor:800 mm passage to the back:320 mm ram surface:560 x 350 mm ram adjustment:72 mm Weight:5,2 t Ba0ufo9sss Dimensions (WxDxH):1,6 x 1,6 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical more
5
Köln, Germany Germany
dealership location
6408 km
1999
used
Weight:350 kg range L-W-H:1400 x 1350 x 1700 mm dimensions of saw-band:2950 x 27 x 0,9 mm Cutting diameter 250 mm Cutting range at 90 degrees: flat 280 x 220 mm Cutting range at 90 degrees: square 220 x 220 mm Cutting range at 60 degrees: round 110 mm Speed range: 36 / 72 m/min Saw blade dimensions 2950 x 27 x 0.9 mm Bfplzgly Engine power 1.5/1.8 kW Machine weight approx. 0.35 t Dimensions LxWxH 1,4 x 1,35 x 1,7 m more
4
Schwäbisch Gmünd , Germany Germany
6690 km
1999
good (used)
Injection moulding machines Demag Ergotech 35/280-80 conceptBaujahr 1999 DescriptionOne Demag injection moulding machine built in 1999 is sold. The machine has almost 50,000 operating hours and was used in our production until May 2019. The Dürrschmidt handling device shown as well as the housing belong to the machine. Bfqevicrev more
Power consumption 2.2 KW 9 piece Filterkatuschen Bqotytqja Weight 150 kg more
Technical data baler Manufacturer Bollegraaf Type HBC 50 Year of construction 1988 / 1995 complete overhauled at the manufacturer Bollegraaf Bfa0wh9cqt Press power main press 55 tons Specific press capacity 6,25 kg/cm² Press power of pre-press 25 tons Feed channel 1,320 x 1,100 mm (l x w) Capacity per cycle time 2,45 cbm Theoretic cycle time 30 sec. Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 30 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk w... more
Gear motor, electric motor, three-phase motor Manufacturers motor BONFIGLIOLI type 55BN-2 Manufacturers gear BONFIGLIOLI type performance 0.12 KW 7paqji3 Type B5 angle diameter shaft Ø 9 mm Protection type price per piece -2 x available Dimensions weight 4 kg more
5
Langenfeld, Germany Germany
dealership location
6395 km
2002
used
max. wheel diameter 280 mm gear width - mm max. module 7 min. module 1 Control LIEBHERR CNC total power requirement - kW weight of the machine ca. 10,0 t Gfwxuxh dimensions of the machine ca. - m more
2
Emmerich, Germany Germany
dealership location
6322 km
ready for operation (used)
Used Mercedes crankscreen suitable for ActrosPart number e.g.: A541 030 2801 multiple times on warehouse also other manufacturers and types available condition for the closing of the purchase is a business--business activity of the buyer and their corresponding proof. Please send us proof of your business--business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping is only made after proof of business-... more
Fibro EM 13.0280.8.122.08.0.03 Fibrotor rotary table SN: 1410410/1 roe deer foot FG691 flat gear SN:482511 , used, normal signs of wear, 100 functional, scope of delivery acc. to photos Bfozqz3ft7 more
SX4 details: 7,5 bar pressure = 450 liter/min 10 bar pressure = 360 liter/min 13 bar pressure = 260 liter/min Power: 3kW Bdmc8yxuvq Fully automatic Super sound-proofed Vibration-damped Sigma control 2 Kaeser TA 5 refrigerated air dryer more
3
Tailstock MK 5 SPH 280 mm Depth 310 mm Muyxr Width 840 mm Height 470 mm more
Multi function punch, punch, hole punch, pneumatic punch Manufacturers Tekna Type TK280 HU3 -Matr. 109 Bds3fe22o -COD. Z994 598 88A340 -pneumatisch operated Piston stroke 20 mm Print performance 29.42 kN Nominal pressure 6/7 bar Foot switch Model 2012 Dimensions 565/600/H1050 mm Weight 71 kg more
6
Volkach, Germany Germany
dealership location
6667 km
2014
used
3 MONTHS LA-POSTPRESS WARRANTY except electronics Hjpemd9 offer consists of: Horizon PSX-56 package delivery with sheet press capacity: max. 900 parcels/h inlet hight: 440-1.000mm stacking hight: max.200mm press pressure: 2x1.200kg size: max. 546x330mm min. 128x92mm weight: 645kg dimensions (LxBxH): 1.940x2.280x1.080mm power: 230V, 4,5A, 0,6kW We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs more
3
Emmerich, Germany Germany
dealership location
6322 km
ready for operation (used)
NFZ spare part, used, DAF Type XF 280 M, used, no indication of the year of construction, condition for the closing of the purchase is a business activity of the buyer and their corresponding proof. Please send us proof of your business/business activity (e.g. VAT identification number, business license or association or chamber card) after the completion of the purchase process. Shipping/handover takes place only after proof of business/commercial activity. Sale and delivery are made solely on ... more
1
Brandenburg, Deutschland Germany
6741 km
1998
ready for operation (used)
Horiz. band sawing machine (280 mm) SMA-REF-6458 Type: band sawing machines Manufacturer: Knuth Model: HB 280 Year: 1998 Working range: 90° round: 280 mm 90° square: 280 mm 90° flat: 350 x 200 mm 45° round: 240 mm 45° square: 210 mm 45° flat: 240 x 180 mm Dimensions: 1.800 x 850 x 900 mm Vssnvy 530 kg Condition: in use ready for your test Location: Eestern Germany Availability: on demand more
automatic infeed electro magnet coolant device with paper filtering Stgt8s dressing device Technische Daten / technical details: gr. Schleiflänge / max. grinding length 1200 mm gr. Schleifbreite / max. grinding width 800 mm Durchlass zwischen Ständer/distance between columns 990 mm Schleifscheibe/grinding wheel 300x50x127 mm Magnetgröße / electro magnet size 1000x700 mm Gewicht ca. /weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Tec... more
x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 Benjqh3ak0 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid ... more
adjustable geared motor, linear geared motor, electric motor Engine power 0.75 KW speed range 465-2800 RPM-regelbar drive shaft Ø 14 mm protection class IP54 U0lrexdb7 Dimensions 505/197/H200 mm Weight 21 kg more
cutting diameter 260 mm saw band length 3.150 x 27 mm cutting width 320 x 200 mm vice 325 mm cutting speed 40/80 m/min capacity 45 degrees: flat 210 x 200 mm capacity 45 degrees: round 230 mm Bfmopbij3c capacity 45 degrees: square 210 x 210 mm Dimensions (L,W) 720 x 2.000 mm more
6
Emmerich, Germany Germany
dealership location
6322 km
ready for operation (used)
Original Deutz combination air filter, new manufacturer: MANNDeutz original partial numbers: Kombi Filter: 01181280filter insert: 0118257Safety element: 01180870 diameter connector plucks outside: About 70 mmMultifold on inventory condition for the purchase completion is one Commercial activity of the buyer and their corresponding proof. Please send us proof of your business/business activity (e.g. VAT identification number, business license or association or chamber card) after the completion o... more
Make Alfa Laval Sweden, Type FESX-412B-35/4000-66, No 2947617, New unknown, Material Stainless steel, Separator (1x), Motor 37,0 KW, 380-415 Volt, Floorspace 1,7x1,2 M, Total height 1,7 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!... more
4
Sittard, Netherlands Netherlands
dealership location
6331 km
2018
used
Type of fuel: Diesel Field of application: Construction Drive: Wheel Empty weight: 21.546 kg Mast: telescopic Lifting capacity: 454 kg Working height: 4.315 cm CE mark: yes Technical condition: very good EPA marked Max. horizontal reach: 2740 m Max swing of arm in degrees: 360 Be2dbq7h3m Max swing of platform in degrees: 160 more
7
ST GERMAIN DE PASQUIER, France France
dealership location
6083 km
ready for operation (used)
Serial number v7420 S/ bench (mm) 440 Bzneltlu Distance between points (mm) 2800 Machine Weight (T) 11 more
Three-phase motor, electric motor Power 1,5 KW Es9kqpv Speed 2800 RPM Shaft ø 15 mm Design B3/5 Weight 15 kg more
sheet width 2500 mm plate thickness 16,0 mm diameter of upper rolls 290 mm diameter of lower rolls 260 mm engine output 15,0 kW bending speed 6,0 m/min. dimensions of the machine ca. 4.950x1.500x1.760 mm weight 12.200 kg Ben8fil8ye more
9
Monheim, Germany Germany
dealership location
6394 km
1999
used
x-travel 2800 mm y-travel 800 mm z-travel 630 mm Control Sinumerik 840C Nmo07 X-Axis table travel in pendulum mode 1000 l. - 1000 r. mm feed speed x/y/z, infinitely variable 1-10000 mm/min rapid traverse x/y/z 15 m/min table surface area 850 x 3000 mm table load 6000 kg spindle power capacity AC (100/40 % ED) 30/45 kW spindle speed 40 - 4000 U/min transmission ratio 4 tool taper SK 50 DIN69871 spindle torque max. 2490 Nm throat 900 mm distance spindle - table min./max. 150/780 mm total power... more
6
Volkach, Germany Germany
dealership location
6667 km
2012
used
3 MONTHS LA-POSTPRESS WARRANTY except electronics 3r9wq9w2a offer consists of: Horizon PSX-56 package delivery with sheet press capacity: max. 900 parcels/h inlet hight: 440-1.000mm stacking hight: max.200mm press pressure: 2x1.200kg size: max. 546x330mm min. 128x92mm weight: 645kg dimensions (LxBxH): 1.940x2.280x1.080mm power: 230V, 4,5A, 0,6kW We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs more
6
Aachen, Germany Germany
dealership location
6364 km
2013
used
Control Unit: Heidelberg Prinect Press Center , Quality control: Inpress Control, Wallscreen, Feeder type: Preset Plus Feeder, Ultra Sonic Double sheet Control, Double sheet control, Number of printing units: 8x, Perfecting: 4/4, Plate changing: Autoplate Advanced, Jackets, Dampening: Alcolor with Vario, IPA-red./IPA-free, Saphira Blanket Pro 100 (Day), Washing device: all automatic washing devices, Delivery type: Preset Plus Delivery, Powder device: PowderStar AP 500 DUO, AirStar (water coole... more

New machines via email!

Yes, send news from this list to my inbox!
Stay updated!
You can create a label.
How often do you want to be notified about new listings?
280 SX
SELL IMMEDIATELY

with the worldwide market leader from 0,99 EUR per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately

Machineseeker.ie is official sponsor of:
Flag gb
+44 (0) 20 806 810 84
Flag de
+49 (0) 201 857 86 10
Flag nl
+49 (0) 201 857 86 180
Flag pl
+48 (0) 223 076 958
Flag it
+39 800 12 58 38
Flag es
+34 911 433 456
Flag fr
+33 9 80 09 19 36
Flag us
+1 312 94 04 581