Used International 5288 for sale (9,704)

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: B5607, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 410, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table length: 1,120 mm Table width: 600 mm Spindle speed: max. 6,000 rpm Tool positions: 18 MACHINE DETAILS Control system: Heidenhain iTNC 410 Dsdj Afwzgjpfx Acyewd Internal coolant pressure: 20 bar EQUIPMENT Electronic handwheel 18-position tool changer Internal coolant supply Chip conveyor

Condition: excellent (used), Year of construction: 2008, operating hours: 2,483 h, functionality: fully functional, machine/vehicle number: 8015, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,200 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Rapid traverse rate X/Y: 30 m/min Rapid traverse rate Z: 24 m/min Table size: 1,300 × 600 mm Spindle speed: 50–12,000 rpm Spindle power: 21 / 15 kW Tool holder: BT40 Spindle drive: direct drive Tool positions: 40 Tool change time: approx. 4 s Tool changer: dual gripper MACHINE DETAILS Coolant pressure: 20 bar CNC control: Heidenhain iTNC 530 Screen diagonal: 15 inches Operating voltage: 400 V Connected power: 25 kVA Mains frequency: 50/60 Hz Number of phases: 3 Machine weight: approx. 7,500 kg Djds Aggibspfx Acyswd Operating hours Spindle hours: 2,483 h Machine operating hours: 14,198 h Control operating hours: 65,193 h EQUIPMENT Automatic tool changer with dual gripper Internal cooling through the spindle (IKZ), Form A High-pressure coolant system Additional coolant tank Two switchable filter cartridges Chip conveyor parallel to the X-axis Three-color signal light (red/yellow/green) Fully enclosed work area Work area lighting Machine documentation Toolbox Alignment screws and washers CE specification

Condition: used, functionality: fully functional, total length: 48,000 mm, total height: 6,464 mm, Year of construction: 2019, Offered for sale directly by the owner: 2019 FONG KEE TSE-90/150/150-2400 three-layer co-extrusion flat sheet & roll line with only 7,000 operating hours. Used exclusively in our own production, the line remains fully assembled indoors at our facility in Torbalı, İzmir, Türkiye, and is available for live running inspection by prior arrangement. Equipped with top-tier Western components (NORDSON EDI USA die & feedblock, 3x MAAG Switzerland melt pumps, Dynisco USA sensors, Siemens PLC/drives, and Schneider switchgear), this line delivers European-grade optical surface quality. KEY HIGHLIGHTS * Production-Proven Thickness up to 3.0 mm: Although factory paper specs listed 0.3–0.8 mm for thin furniture foil, in our own production we have successfully produced both PET (0.3–3.0 mm) and PMMA/ABS (0.6–3.0 mm) sheets up to 3.0 mm thick. * Multi-Polymer Capability: Production-confirmed across PET, PMMA, ABS, PS (HIPS/GPPS), PC, and PP in A/B/A or A/B/C structures. Dwjdpfxezzdnfs Acyjd * Optical Mirror-Gloss & Matte Finishes: Produces both optical-grade mirror gloss and anti-glare matte finishes. An additional dedicated matte calender roll is included. * Dual Downstream (Sheets & Rolls): Features BOTH an automatic guillotine cutter + vacuum sheet stacker AND a double-station turret winder. 1. MAIN SPECIFICATIONS * Manufacturer & Model: FONG KEE (Taiwan) – TSE-90/150/150-2400 * Year / Hours: 2019 / 7,000 h * Configurations: 3-Layer (A/B/A or A/B/C) * Net Trimmed Sheet Width: 1,500 – 2,100 mm * Sheet Thickness (Production-Proven): PET 0.3–3.0 mm | PMMA/ABS 0.6–3.0 mm * Max. Output: Up to 1,000 kg/h (depending on resin & thickness) * Line Speed: 3 – 10 m/min 2. EXTRUSION & MELT DELIVERY * 3x Vented Single-Screw Extruders: - Extruder A: Ø90 mm, L/D 35:1 (Vented) - Extruder B: Ø150 mm, L/D 32:1 (Vented) - Extruder C: Ø150 mm, L/D 32:1 (Vented) * Filtration: 3x Hydraulic screen changers * Melt Pumps: 3x MAAG (Switzerland) gear melt pumps * Sensors: Dynisco (USA) melt pressure & temperature transducers * Feedblock: EDI Ultraflow I (USA) 3-layer feedblock * Extrusion Die: EDI Ultraflex HRC 100 Fastgap (USA), 2,300 mm width 3. CALENDERING & DOWNSTREAM * Polishing Stack: Horizontal 3-roll stack (Ø400/600/600 × 2,400 mm), hard-chrome mirror rolls with individual TCUs * Spare Roll: 1x Additional dedicated matte calender roll included * Masking: Dual-side protective film lamination * Haul-Off: Cooling conveyor, edge-trimming, and precision haul-off unit * Cutting & Stacking: Automatic guillotine cross-cutter + automatic vacuum stacker * Winding: 2-station turret winder with automatic tension control 4. AUTOMATION & COMMERCIAL TERMS * Controls: Siemens SIMATIC PLC with HMI panels, Siemens SINAMICS G120 drives, Schneider switchgear, air-conditioned cabinets. * Ideal Applications: Furniture foils/laminates, white goods/refrigerator liners (HIPS/ABS), sanitaryware (PMMA/ABS), optical/lighting sheets (PMMA/PC/GPPS), thermoforming rolls (PET/PP). * Asking Price: USD 790,000 EXW Torbalı, İzmir, Türkiye (Open to reasonable offers for a prompt sale).

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: P.0020001424, X-Ray Yxlon international MU231 - fully functional (2003) Fully automatic, 100% x-ray inspection of alloy wheels using YXLON's Y.AI/Rel.9 ADR program reaches a cycle time below 25 seconds per wheel. The automatic defect. Dwedpfxjx Hqnrs Acyed Fully functional X-Ray for alu wheels. Possible alu wheels from size 12 to 19. Machine is fully working, perfect condition. During 2025 full repas was done - all issues are now sorted (tested). Software is unlocked. New owner can test the machine before purchase (Central Bohemia). Machine label attached. Price: 49.000 EUR excl. VAT (price does not include transport and duties) Invoice will be issued in EUR from Czech company. When you will have any questions, do not hesitate to contact us - e-mail / WhatsApp / call Lead cabin (1) with shuttles (2) for the transport of wheels in/out the cabin Decollators to get single wheels for transportation in the cabin X-ray tube (3), Image Intensifier (4), High-voltage generator, X-ray control unit (5) Industrial PC (6) (with mechanical positions and X-ray parameters for every wheel type) Control cabinet with PLC (7) Wheel manipulator (8) (Rotation and linear movement of wheels) X-ray-manipulator (9) (tilt axis with X-ray tube and Image intensifier) Vision System for wheel type recognition Image-Processing Unit (Host PC with Slave PCs) Output conveyor (10) e.g. with an alterable switch (for accepted wheels / rejects)

Year of construction: 2023, condition: like new (used), functionality: fully functional, We offer this as new FoodMAC International Ltd BULLDOG 6000/600 Electric Fryer for frying cut potatoes and similar products, year of construction 2023. Model: FRE 6000/600 Voltage: 400 V Power: 200 kW Year of manufacture: 2023 Weight: 1980 kg Dwedszgt D Hspfx Acyed Machine number: 3035 Capacity: 1500 kg/h If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 011.007, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, controller model: AGIEMATIC T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 350 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 350 mm Rapid traverse: approx. 720 mm/min Number of axes: 4 (X, Y, Z, C) Table size: 600 × 450 mm Workpiece dimensions: max. approx. 860 × 620 × 350 mm Dwodpfx Aco Afxzvsysd Workpiece weight: max. 400 kg Electrode weight: max. 100 kg Working tank (internal): approx. 830 × 590 × 350 mm Distance from table to quill: 170–520 mm MACHINE DETAILS Control system: AGIEMATIC T Generator: AGIEPULS 60 Power connection: 400 V / 50 Hz Dimensions & Weight Dimensions (L × W × H): approx. 3,000 × 1,700 × 2,580 mm Machine weight: approx. 2,550 kg

Year of construction: 2014, condition: like new (used), Heating tunnel for drying footwear. Dwedpfxoz Hw D Ue Acysd

Year of construction: 2019, condition: used, total length: 2,600 mm, total width: 2,800 mm, total height: 1,600 mm, cutting width (max.): 1,800 mm, The FQJ-1800 honeycomb panel cutting machine (year of manufacture 2019) is an efficient, used machine, ideal for precise cutting of panels with widths ranging from 125 mm to 1800 mm and thicknesses of 10–80 mm. Equipped with three blades, it allows for adjustable cutting speeds in the range of 0–50 m/min, enabling the machine to be adapted to individual production needs. The motor has a power of 4 kW (380V, 50Hz), ensuring reliable and high performance even under intensive use. The machine comes from the renowned manufacturer San(qingdao) Machinery Co., which guarantees a robust construction and durability. This is an excellent option for companies looking for professional solutions in the field of honeycomb panel cutting. Dwjdozuxmijpfx Acyod

Year of construction: 2010, condition: used, TECHNICAL DATA Materials: • PE • PP • Extra cut • Thermo • Clear and transparent • PET • Suitable for blank materials • Suitable for pre-printed materials with registration marks Operating / Printing Modes: • Semi-rotary • Full-rotary • Center dancer • Web threading mode • Printing mode • Web type selection: blank web / printed web Flexographic Printing Unit: • 1 flexographic printing station • Suitable for UV ink and varnish • Printing cylinder • Varnish cylinder • Impression roller • Anilox roller • Cartridge Electrical & Pneumatic Requirements: Electrical supply: 400 V Current: 40 A Frequency: 50 Hz Compressed air: 6 bar Air consumption: 300 l/min Dwodsz R D Ebspfx Acyed

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23A0017, turning diameter over cross slide: 520 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, total height: 1,890 mm, total width: 1,620 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, CNC Lathe, with 45° inclined bed - COGENTECH > Siemens 808D control > Siemens motors > Linear guides > 6'' hydraulic universal with 3 jaws > 6-station electric turret Djdpfx Acsvwbvpeyowd

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials.. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Djdpjwgc I Refx Acyjwd Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2113/21, type of input current: three-phase, input voltage: 400 V, total height: 2,200 mm, total width: 1,500 mm, total length: 2,000 mm, nominal power (apparent): 100 kVA, electrical fuse: 250 A, working range: 40 mm, welding power (max.): 100 kVA, overall weight: 2,500 kg, A new, unused butt-welding machine. Originally acquired for butt-welding 40 mm rebar, it was never put into service because the project was cancelled. The machine is currently fitted with 40 mm round jaws, but custom jaws of any required shape can easily be manufactured for it. In addition to rebar, the machine can be used to fabricate joints for heavy machinery or anchor bolts for reinforcement work. Suitable for the butt welding of all types of steel grades up to 1,500 mm². Djdpez Ehvljfx Acyowd

Condition: new, Year of construction: 2018, functionality: fully functional, power: 25 kW (33.99 HP), New in box specialized food waste shredder. Manufactured in 2018 but has never been used, still in box. Dwodpfx Acewq Rapsyod

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Dedpfx Aew H Naascyowd Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: good (used), Year of construction: 1997, operating hours: 33,000 h, functionality: fully functional, machine/vehicle number: 323, turning diameter over cross slide: 200 mm, turning length: 950 mm, turning diameter: 410 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, spindle motor power: 7,500 W, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, total height: 1,700 mm, total length: 2,300 mm, total width: 1,400 mm, quill travel distance: 120 mm, quill diameter: 65 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, feed rate Z-axis: 10 m/min, turning diameter over bed slide: 410 mm, turning diameter over top slide: 200 mm, type of input current: three-phase, torque: 700 Nm, overall weight: 2,100 kg, swing diameter over bed slide: 410 mm, bar passage: 54 mm, swing diameter over top slide: 200 mm, spindle nose: DIN 55027 Size 6 type, center height: 200 mm, bar diameter (max.): 54 mm, travel distance cross slide: 230 mm, Equipment: rotational speed infinitely variable, 1997 Weiler E35 Cycle-Controlled CNC Lathe Used 1997 Weiler E35 CNC / Cycle-Controlled Lathe for Sale – Weiler D1 Control – 410mm Swing – 54mm Spindle Bore – 3,000rpm – 10 Tool Holders Manufacturer: Weiler Model: E 35 Machine Type: CnC Lathe Year: 1997 Condition: Working Well Machine Description The Weiler E35 is a high-quality German-built precision lathe combining the flexibility of a conventional centre lathe with the productivity of CNC/cycle-controlled machining. This machine is equipped with the Weiler digital conversational cycle control, allowing straightforward manual machining as well as programmed turning cycles for repeat work, tapers, radii and other common turning operations. With approximately 410mm swing over the bed, 54mm spindle bore and spindle speeds up to 3,000rpm, the E35 is particularly well suited to precision engineering, toolroom work, maintenance departments, repair work and small-to-medium batch production. The machine has approximately 33,000 power-on hours and is supplied with 10 quick-change toolpost holders. Main Specifications Manufacturer: Weiler Werkzeugmaschinen Model: E35 Year: 1997 Serial Number: 323 Machine Type: Cycle-Controlled / CNC Centre Lathe Control: Weiler Digital Cycle Control / D1-type control Power-On Hours: Approx. 33,000 hours Turning Capacity Swing Over Bed: 410mm Swing Over Cross Slide: 200mm Centre Height: 200mm Spindle Bore: 54mm Maximum Chuck Diameter: 250mm Faceplate Diameter: 355mm Distance Between Centres: 950mm Spindle Spindle Speed Range: 1–3,000rpm Spindle Power: 7.5kW Maximum Spindle Torque: 700Nm Spindle Bore: 54mm Spindle Internal Taper: MT6 Spindle Nose: DIN 55027 Size 6 type The combination of a 54mm spindle bore and substantial torque makes the E35 suitable for both precision finishing and heavier general turning work. Weiler Cycle Control The machine is fitted with the Weiler conversational cycle control, designed to make CNC turning accessible without requiring full conventional G-code programming for every job. The control provides functions for operations such as: Straight turning Facing Taper turning Radius turning Threading Positioning Feed control Spindle speed control Repetitive machining cycles Manual machine operation Conversational cycle programming This type of control makes the E35 particularly attractive to toolrooms and general engineering workshops where both one-off components and repeat batches are produced. Feed & Axis Performance Longitudinal Feed Range: 0.001–20mm/rev Dwjdpfo Agu A Sjx Acysd Cross Feed Range: 0.001–20mm/rev Longitudinal Rapid Traverse: 10m/min Cross Rapid Traverse: 5m/min Cross Travel: 230mm Tailstock Tailstock Taper: MT4 Tailstock Quill Diameter: 65mm Tailstock Quill Stroke: 120mm The tailstock allows the machine to support longer workpieces and carry out drilling, reaming and centre-working operations. Tooling Included The machine is supplied with: 10 quick-change toolpost holders Electrical Specification Operating Voltage: 400V Frequency: 50Hz Connected Load: 10kW Nominal Current: 18A Control Voltage: 24 / 230V Approximate Machine Dimensions Overall Length: 2,300mm Overall Width: 1,400mm Overall Height: 1,700mm Machine Weight: 2,100kg Please Note: All specifications, dimensions, capacities, speeds and machine details quoted above are approximate and are provided for guidance only.

Condition: new, Year of construction: 2022, functionality: fully functional, pressing force: 4 t, filling opening width: 715 mm, filling opening length: 550 mm, bale length: 510 mm, bale width: 710 mm, bale height: 600 mm, bale weight: 50 kg, total width: 830 mm, total height: 2,220 mm, total length: 785 mm, type of input current: AC, input voltage: 230 V, noise level: 70 dB, transport height: 2,220 mm, oil tank capacity: 4 l, power: 1.5 kW (2.04 HP), empty load weight: 375 kg, transport width: 835 mm, transport length: 790 mm, input frequency: 50 Hz, Brand new, unused vertical single chamber baler, manufactured in 2022. Perfect for small businesses, baling cardboard or soft plastic (film). Simple connection with a plug to a 220V power supply. We can offer delivery for an additional fee or by arrangement. Dwodpfx Acevy Drxoyed More information by whatsapp or phone.

Condition: refurbished (used), Year of construction: 2021, operating hours: 45 h, machine/vehicle number: 202021, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut Dedjwrn Iyspfx Acyewd 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. used high-pressure pump BFT Ecotron 40.22 (650 operating hours) (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, cutting height (max.): 105 mm, cutting width (max.): 3,200 mm, total length: 4,500 mm, total width: 1,600 mm, total height: 1,800 mm, overall weight: 5,200 kg, Equipment: CE marking, saw blade guard, scorer, SCM Sigma Impact 105 C Beam Saw – 3200 × 3200 mm – 2003 Price: €19,500 + VAT – Ex Works, Ireland SCM Sigma Impact 105 C industrial beam saw / panel sizing saw. Year: 2003 Cutting capacity: 3200 × 3200 mm Blade projection: 105 mm Manufacturer: SCM Model: Sigma Impact 105 C Location: Ireland Condition: Used Availability: Immediately available The machine has been dismantled and is ready for loading and shipping. The SCM Sigma Impact 105 C is a heavy-duty industrial panel sizing saw designed for accurate, high-volume processing of sheet materials including MDF, MFC, chipboard and similar wood-based panels. Machine Specification 3200 mm cutting length 3200 mm rear loading/pusher capacity 105 mm blade projection Automatic programmable pusher Pneumatic workpiece grippers Main saw and scoring saw Pressure beam clamping Automatic cutting cycle Industrial SCM construction Condition & Sale The machine is used and is offered as seen, ex works Ireland. The machine is currently dismantled and prepared for transport. Inspection of the machine and components can be arranged by appointment. The buyer is responsible for collection, transport, installation and commissioning unless otherwise agreed prior to purchase. Assistance with loading and international transport can be arranged at additional cost. Payment in full prior to collection. Export The machine is immediately available for collection from Ireland. We can assist international buyers with: Loading arrangements European and UK transport quotations Installation and commissioning quotations if required Dwjdpez Iykmjfx Acyed Price: €19,500 + VAT, Ex Works Ireland Contact for further information, photographs, videos or transport enquiries. Search Keywords SCM Sigma 105, SCM Sigma Impact 105 C, SCM beam saw, used beam saw, used beamsaw, panel sizing saw, automatic panel saw, CNC panel saw, SCM panel saw, 3200 beam saw, 3200 x 3200 panel saw, Holzma alternative, Selco alternative, Gabbiani alternative, used woodworking machinery.

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Dodpfx Aswty Etscyjwd

Condition: used, Year of construction: 2020, GS International 10t Dwsdpfx Aoznfduecyjd Bj 2020 Width Length 12 mtr Hydraulic adjustable Immediately available If you are interested in our loading bridge, we can arrange transport for you.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 774 h, functionality: fully functional, machine/vehicle number: 373/02  , center width: 3,040 mm, swing diameter over cross slide: 350 mm, quill stroke: 210 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of December 1, 2026, and December 10, 2026! TECHNICAL DETAILS Center distance: 3,040 mm Diameter of swing over cross slide: 350 mm Max. diameter of swing: 650 mm Travel of cross slide: 375 mm Spindle head size: 8 Spindle diameter in the front bearing: 120 mm Material passage: max. 71 mm Chuck diameter: 250–315 mm Speed range: 2–1,800 rpm Tailstock Outer diameter of quill: 110 mm Max. quill stroke: 210 mm Internal taper: MK 6 MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 63 A Connected power: 41 kVA Control: SIEMENS Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,000 x 2,000 mm Dsdpfxj Ahn Hke Acyowd Weight: 6,000 kg Recorded operating hours: 774 h EQUIPMENT Tailstock Multifix tool holder 3-jaw chuck FORKARDT, diameter: 300 mm 2 steady rests Additional Multifix tool holder Various centers Various tapers Tool holders Turning tool holders Milling cutters Jaws Documentation External reference: Frankenthal - Lot 366

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: DC, total width: 3,600 mm, total length: 2,500 mm, total height: 6,700 mm, - Harburg Freudenberger internal mixer production is underway - certified according to IATF 16949 until early 2026 - Type GK 255 N - Hydraulic ram, saddle, filling shaft flap - Pro c tec control system - with Siemens drive - Gearbox Dwodpsz D E Dqjfx Acyed - Hydraulic unit - Lubrication unit - HF, CB, WM dosing - Engine overhauled in 2022 - Gearbox refurbished - Annual manufacturer inspection/maintenance/documentation - Upstream and downstream equipment available - Attractive package price possible

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value Dwjdpfx Acoif Ek Roysd • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), IM Very good condition. Dwsdjw Ebwuopfx Acyjd

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization Dwedefnlkwepfx Acyjd (Product photo as an example) The machine is CE certified.