Used Upc 80 120 for sale (25,842)

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Lrjdpfx Abezuabzsyou Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2006, CLAMPING UNIT Clamping force: 800 kN Locking force: 800 kN Distance between tie bars: 420 x 420 mm Max. opening stroke: 450 mm Min. mould height: 250 mm (200 / 175 mm with ZE 214) Max. distance between platens: 700 mm (750 / 800 mm with WA 211) Platen size (H x V): 590 x 600 mm Max. mould weight: 700 kg Max. mould weight on moving platen: 450 kg HYDRAULIC EJECTOR Ejector stroke: 150 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (120) Screw diameter: 22 mm L/D ratio: 20 Injection pressure: 2591 bar Stroke volume: 41.8 cm³ Shot weight (PS): 37 g Max. dosing stroke: 110 mm Max. nozzle stroke: 200 mm Ljdez D U Skepfx Abyeru Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN Barrel heating power: 5.1 kW Hopper capacity: 35 l GENERAL Oil tank capacity: 140 l Pump motor: 5.5 / 7.5 kW Total installed power: 10.6 / 12.6 kW Dry cycle time (EUROMAP 6a): 2.01 s – 196 mm / 1.82 s – 196 mm Net weight (without oil): 2550 kg (2650 kg with full cladding) Dimensions (L x W x H): 3.4 x 1.2 x 2.0 m (3.6 x 1.2 x 2.0 m with full cladding) Noise level (idle / full load): 56 / 71 dB(A)

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm Lodpfx Abjz Hxhhsyeru

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Lrsdpfsz D Dxgox Abyeu Manufacturing Date: 2024-08-12 Voltage: 380 V Frequency: 50 Hz Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use • High profile precision and repeatability Machine condition: • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Attractive price.

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators Lsdpfx Abjz Hxfyoyeru New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, Year of construction: 1989, plate thickness 4 mm cutting angle adjustment 30-120 ° table height 900 mm Lodpfx Abeyv N Hloyeru 407 weight of the machine ca. 760 kg dimensions of the machine ca. 1300x1000x1150 mm

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 1044, Diosna SP 120 D spiral mixer/kneading machine 32 Ah connection with 2-hour timer, 2 speeds on castors Lrodpodc Eh Asfx Abyeu In excellent condition, operates quietly If you have any further questions, please contact us. Thank you in advance.

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Lsdpfxey D Adts Abyoru Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: used, Year of construction: 2020, machine/vehicle number: PST42, Used HRS pasteurizer cold-fill 8000 LPH - Year 2020Technical Specifications & Performance DataThis HRS cold fill pasteurizer unit is designed for thermal treatment within beverage production and industrial packaging processes. Built for cold-fill applications, it provides a controlled pasteurization stage before or during integration with a used bottling line. The unit has a stated processing capacity of 8000 LPH and was manufactured in 2020.Manufacturer: HRSEquipment: Cold Fill Pasteurizer Unit IICapacity: 8000 LPHYear: 2020Electrical supply: 420V / 50HzConfiguration: 1X8 - MI120 - 8916 - 8000 - 316/316Additional configuration lines: 1X12 - MI120 - 8916 - 8000 - 316/316; 1X1 - K50 (2P) - 219/16 - 750 - 304/316Construction materials indicated: 316/316 and 304/316 stainless steel gradesAdvanced Automation & Control SystemsThe pasteurizer is configured for a 420V, 50Hz electrical supply. In a beverage production environment, a pasteurization unit is typically connected to line controls and process instrumentation to maintain stable thermal treatment parameters and coordinate product flow with upstream and downstream bottling equipment.Control, monitoring and interlocking arrangements should be assessed during installation planning in relation to the intended production line layout and operating procedures.Production Line Integration CapabilitiesA cold fill pasteurizer is a process-stage machine suited to integration with industrial packaging and bottling equipment. It can support product preparation and thermal processing ahead of filling, or be incorporated into a wider beverage production system according to the required process flow.Its 8000 LPH capacity provides a clear basis for matching the unit with compatible filling, conveying, storage and downstream packaging machinery. Integration should consider product transfer piping, hygienic connections, buffer capacity and synchronization with the selected bottling line throughput.Machine Condition & Maintenance HistoryThe unit was manufactured in 2020. No run-hour meter is installed, and no operating-hour reading is available. The equipment includes visible stainless-steel process piping and vessel or tank components.As with any second hand pasteurization equipment, commissioning should include inspection of product-contact surfaces, seals, pumps, instrumentation, electrical connections and process circuits before production use.Operational Performance & VersatilityThis pasteurizer is intended for cold-fill thermal processing applications in beverage production. Pasteurization equipment of this type is used to support controlled treatment of liquid products while maintaining a hygienic process path through stainless-steel piping and process components.The indicated 316/316 and 304/316 material designations support its suitability for demanding hygienic process environments. Final product compatibility depends on the process recipe, required pasteurization profile and the complete line configuration.Installation Requirements & Site Preparation Ljdpfo Adtq Ejx Abysru

Condition: used, Stainless steel welding line MOD.70/120, made OLIMPIA 80 with tricathode welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 35 – 120 mm - Thickness : 0.7 – 3.5 mm - Length : 3 – 6 m Tube diameter: 35 – 120 mm Thickness: 0,7 – 3,5 mm Lrsdpfx Abovtn H Toyeu Tube length: 3 – 6 m

Condition: like new (used), Year of construction: 2008, Krauss-Maffei horizontal injection molding machine with 120 tons of clamping force. Electric machine. Year of manufacture 2008. Control MC5. 63.000 working hours. 40mm spindle. Extras: anti vibration blades, 8 zones flow meter. Additional options: 1x pneumatic valve, 6 zones hot runner, Euromap 67 for Robot connection. The machine is delivered RE-Conditioned by our technical team and in optimal working condition. We can offer a start-up service at your premises. Technical Details Lodpfsttgybjx Abysru INJECTION WEIGHT 185 gr INJECTION VOLUME 201 ccm WORKING HOURS 63000 YEAR OF MANUFACTURE 2008 DISTANCE BETWEEN COLUMNS 470x470mm PLATE DIMENSIONS 780x770mm CLOSING POWER 1200 kN INJECTION PRESSURE 1860 bar SPINDLE THICKNESS 40mm MINIMUM MOULD THICKNESS 200/450mm OPENING STROKE 850mm

Condition: excellent (used), CATALOGUE NUMBER: 6913 TECHNICAL DATA - Track width: 360 mm - Shaft width: 350 mm - Max. blade diameter: 350 mm - Blade bore diameter: 80 mm - Max. cutting height: 120 mm From above: - Clamps - Toothed feed shaft - Clamps - Smooth sliding shaft - Shaft with saw blades - Sliding, pressure shaft From below: - 2 sliding rollers in front of the table - Guide - Clamps - Track - Central track lubrication - Electric lifting of the saw blade shaft - Electric lifting of the machine body - Smooth feed speed adjustment - Feed motor: approx. 2.5 kW - Main motor: 30 kW - Overall dimensions (L/W/H): 2500x2300x1900 mm - Weight: approx. 4000 kg ADVANTAGES - Made in the Czech Republic - 2 sliding rollers on the table - Used multi-blade saw Lredpfx Abszu R H Isyeu - Very good condition Net price: 31900 PLN Net price: 7419 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2016, operating hours: 13,879 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, The machine is in decent condition and is equipped with a 3-position rotary table (3x120°) Year of manufacture: 2016 Lrodpfx Aownfw Debyou Operating hours pump: 17,263 Operating hours production: 13,879 Location: Southern Germany Contrary to the specification, the light curtain is not installed, as we operated the system with an enclosed automation (see photos). However, the components of the light curtain are available and will be sold with the unit. The part-specific automation and the feed hopper shown in the photo are not for sale. It is technically possible to convert the system to a 2-position rotary table (2x180°). This could be ordered by the buyer directly from Arburg after purchase. Ex works sale

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). Lrodpfx Aey Evirjbysu - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: used, 80 DIN-rail power supplies Manufacturer: Mean Well Type: DRH-120-24 Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Lrjdjzu A Taspfx Abyju Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2005, SECOND-HAND BENDING PRESS VECCHIATO MM. 2600X1300 - CE RULES - Opening mm. 1500 - N. 4 cylinders - Top bottom movement - Year 2005 - Safety nets Ljdpewrzbaefx Abysru - Manual and CE certificate

Condition: excellent (used), Year of construction: 1992, Complete production line Omag Tronic 140/120 - Siemens S5 Lrjdpfxoz Ngzio Abyeu - elevator - lowerator - finger car - cuber - foiling device Messersi 2011 - washing device Schindler 2007 - 15 moulds - 3000 production boards 1400/1150 - double mixing plant Skako 2250l + 750l with skips, cement weights, flying bucket, color mix

Condition: excellent (used), Year of construction: 2016, operating hours: 16,803 h, travel distance X-axis: 800 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 850 mm, workpiece weight (max.): 1,800 kg, total height: 3,700 mm, total length: 5,000 mm, total width: 5,600 mm, table height: 700 mm, table length: 900 mm, overall weight: 21,500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, Year of construction: 2016 CNC controller: CELOS with SIEMENS 840D sl operate 21,5" ERGOline Control with Multi-Touch Screen Axes X-axis travel mm: 800 Y-axis travel mm: 1050 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: -30º/180º (0,001) Feed rates m/min: 60 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 7 Milling/turning table nc: Table dimensions mm: Ø900x700 Max. workpiece weight kg: 1800 Table rotation speed rpm: 40 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40/100%ED) Spindle torque Nm: 130/86 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Lrsdpfx Aj Adzbrsbyeu Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 63 Tool changer: Double gripper With free neighboring places mm: 120 With occupied neighboring places mm: 80 Max. Tool Length mm: 650 Max tool weight kg: 15 Chip-to-chip time s: 4.2 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp Tool breakage probe Mist collector 3D quickSET MPC – Machine Protection Control Paper band filter Active chatter suppression (ACC), improved surface finish with reduced machining time, extended tool life Machine running times Under power: 38383 Spindle Working: 16803 Rated power kVA: 63 Basic machine dimensions / weight Length mm: 5000 Width mm: 5600 Height mm: 3700 Weight kg: 21500

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) Lodpfx Abozhpg Tsyeru delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, FOR SALE – Complete VECTOR Model 2000 EUR / EPAL Pallet Production Line (800 × 1200 mm) We are offering for sale a complete VECTOR Model 2000 production line for manufacturing EUR / EPAL pallets (800 × 1200 mm). Ledps Abbiksfx Abyjru The line has been in continuous operation since 2018 and has been regularly serviced and maintained, ensuring it is in excellent working condition. To date, it has produced 2,693,462 pallets. Technical Specifications: * Manufacturer: VECTOR * Model: 2000 * Pallet type: EUR / EPAL * Pallet dimensions: 800 × 1200 mm * Production capacity: Up to 300 pallets/hour * Certification: CE * Year of commissioning: 2018 The production line is currently in operation and can be inspected while running at our facility. Detailed technical specifications are available upon request. ===== Complete Vector Model 2000 line for the production of EUR / EPAL pallets 800x1200 for sale. The line has been in continuous operation since 2018, is regularly serviced and maintained in perfect working order. To date, it has produced 2,693,462 pallets. Specifications: Manufacturer: VECTOR Model: 2000 Production of EUR / EPAL pallets Pallet format: 800 x 1200 mm Capacity: up to 300 pallets / h CE certificate Year of commissioning: 2018 The line is in continuous operation – it is possible to view the machine while it is running at our facility. Detailed technical data is available for interested parties. We invite you to contact us and visit us in Andrychów.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail Lrsdpfjwugczox Abyeu 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Lrsdpfx Ajz Iq E Ujbysu Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: reconditioned (used), This Duplo DBM-120 Booklet Maker with DBM-120T Trimmer provides a compact and versatile solution for producing professionally stitched, folded and trimmed booklets. With a booklet count of approximately 217,000, the system has been fully serviced, inspected and production tested by our engineers, ensuring it is ready to go straight into production. This particular machine also includes a purpose-built stand, positioning the booklet maker at a comfortable working height and making it considerably easier to operate when hand-feeding pre-collated sets. Ideal for digital printers, commercial printers and in-plant finishing departments, the DBM-120 can produce booklets at speeds of up to 2,400 booklets per hour. The system can process sets of up to 20 sheets of 80gsm, producing booklets of up to 80 pages, while the integrated DBM-120T fore-edge trimmer removes the open edge after folding to give each booklet a clean, professional finish. Key Features ✅ Approx. 217,000 booklet count ✅ Stitch, fold and trim in one production process ✅ DBM-120T automatic fore-edge trimmer ✅ Purpose-built operator stand for easier hand feeding ✅ Up to 2,400 booklets per hour ✅ Produces booklets up to 80 pages / 20 sheets of 80gsm ✅ Automatic setup for quick job changes ✅ 10 preset and 3 custom programmes ✅ Saddle stitching, side stitching, corner stitching and fold-only operation ✅ Automatic adjustment according to set thickness ✅ Fine adjustment of staple, fold and trim positions ✅ Twin staple heads ✅ 5,000 staple capacity per head ✅ Can be operated standalone or inline with compatible Duplo collators Ljdjz D H Nhepfx Abyjru Ideal for Standalone Digital Print Production One of the advantages of this particular DBM-120 is the addition of its purpose-built stand. The stand raises the system to a practical working height, making it much more comfortable for an operator to hand-feed pre-collated sets directly into the booklet maker. This makes the system particularly well suited to short and medium-run digital booklet production, without requiring a separate collating tower. Simply print and collate the sets digitally, hand feed them into the DBM-120 and the system takes care of the stitching, folding and fore-edge trimming. Simple Automatic Setup The DBM-120 has been designed for straightforward operation and fast job changes. The operator selects the required programme and the machine automatically adjusts for the job. Fine adjustments to the staple position, fold position and trim position can then be made where required and stored for future use. With 13 programme positions, repeat jobs can be recalled quickly, helping reduce setup time and waste between different booklet formats. Professional Booklet Finishing The DBM-120 automatically stitches and folds each set to produce a consistent, securely finished booklet. The connected DBM-120T Trimmer automatically trims the fore edge of the booklet as it exits the booklet maker, removing the uneven edge created during folding and providing a clean, professional finished product. System Includes Duplo DBM-120 Booklet Maker Duplo DBM-120T Fore-Edge Trimmer Purpose-built operator stand Serviced & Tested by Glendale This DBM-120 has been fully serviced, inspected and production tested by our engineers. The complete system has been checked and tested under production conditions to ensure correct operation before being offered for sale.

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Lsded Aqqzepfx Abyjru Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: used, 🧰 Product features • Condition: Used, see photos • Color: grey • Material: Metal • External dimensions: 124 x 83.5 x 97 cm • Load capacity: 1000 kg • Stack load: 5000 kg • Weight: 78 kg • Front: foldable • Base: Sheet metal base with wood insert 💰 Price € 99,- net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Constantly over 5000 linear meters of pallet racking in stock from numerous manufacturers (Changes and errors in the technical data, details and prices, as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Lodpfsvb T Ewox Abyjru Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30–50 semi-trailer truck turnover for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS, USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATIONS: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Fixed-price purchase: Purchase of merchandise, equipment & entire warehouse stocks including thorough clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and thorough handover. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!