Used Band Feed for sale (14,453)

Condition: good (used), Year of construction: 1982, Cutting capacity 90° round 320 mm square 320 x 320 mm rectangular 540 x 200 mm Cutting capacity 45° round 175 mm square 175 x 175 mm rectangular 150 x 270 mm Main motor 1.5 kW Cutting speed, stepless 17 - 120 m/min Saw blade size 3660 x 27 x 0.9 mm Dimensions L x W x H 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: Rcedpoxztfajfx Ab Eed • Semi-automatic version • Raising and lowering of the saw frame • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of the clamping jaws • Cutting speed steplessly adjustable between 17 - 120 m/min • Automatic cutting pressure regulation • Material stop length 500 mm • Coolant system • Mitre swiveling device: The entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Cutting capacity, miter cut at 45° circular: 160 mm Rcjdpfx Aboznh Nmj Eod Saw blade dimensions: 27 x 0.9 x 2750 mm Saw blade speed, infinitely adjustable Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: used, Year of construction: 2004, cutting diameter 320 mm cutting width 320 x 320 mm saw band length 5.090x34x1,1 mm cutting speed 20 - 110 m/min feed length 750 einfach mm min. dia. 10,0 mm Rcsdozluk Sspfx Ab Esd min. cut-off length 6,0 mm total power requirement 7,0 kW weight of the machine ca. 2.200 kg

Condition: used, Storage location: Sonnefeld Rcsdpfxsway Dcj Ab Eed

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Rcjdpfx Aovvkd Teb Ejd Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Redpfx Abevvkfds Ejcd

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Rodpfx Ajvvkfqeb Eecd

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Rsdpsvvkfwofx Ab Eocd

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Rcsdpfx Aboxyiilj Eod Storage location: Nattheim

Condition: used, Motor 4.0 kW Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction port diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 650 kg Stock location: Nattheim Rsdpfxewayzbj Ab Eocd

Condition: used, Year of construction: 1994, Wheel diameter: 500 mm with motor brake. Maximum cutting height: 320 mm. Column side left, top and bottom, APPA guides. Motor: 1.5 kW. Table tiltable. Mobility device with steering wheels and blade tension indicator. Blade length: min. 4040 mm, max. 4140 mm. Location: Nattheim. Redewl D S Uepfx Ab Eecd

Condition: used, Year of construction: 1999, Edge height: 10 - 60 mm Edge thickness: 0.4 - 3 mm Min. curve radius: 20 mm Feed speed: 2 - 18 / 4 - 14 m/min. Motor: 5.2 kW Air pressure: 6 bar Dimensions: 900 x 1300 x 1200 mm Weight: approx. 350 kg Storage location: Nattheim Rsdpeymcrbjfx Ab Eocd

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm saw band length 3200 - 3400 mm Rodpfsxcp Sfox Ab Ejcd table - swivable +/- 20 ° table surface area 600 x 600 mm table - tiltable +/- 45 ° total power requirement 1,7 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 Rcsdpjylp A Dofx Ab Ejd min/max. pitch cone length 200 - mm total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Rcjdpfx Aozpb Eqsb Eod

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. Rodpfxjy Urtfe Ab Eecd All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1989, functionality: fully functional, Kasto HBA 360 AU bandsaw incl. roller conveyor Cutting range: 360 mm Saw blade dimensions: 5334 x 32 mm Length: 2310 mm Rcjdpfx Aoyxxfiob Eod Width: 2600 mm Height: 1700 mm Weight: 2600 kg We are available for further questions.

Condition: excellent (used), Year of construction: 2006, Berg & Schmid CNC Sawing Machine Year of manufacture: 2006 Control system: - CNC control (freely programmable) Cutting range: - Round: 410 mm - Flat: 410 mm - Width 3500 x Length 2000 x Height 2200 mm - Working height 730 mm Cutting speed: - 12 – 110 m/min. Rcsdpfxozp Inls Ab Ejd - Material feed via precision ball screw and linear guide. - Hydraulic saw blade tensioning. - Automatic double-sided saw blade free-travel device. - Hydraulically driven chip conveyor. - Chip pressure regulation for thin-walled tubes and profiles. - Frequency-controlled sawing drive, stepless. - Automatic initial cut function. - Saw blade path monitoring Sawing drive: - 5.5 kW Accessories: - 10 new saw blades Delivery time: - Immediate

Condition: new, Feed roller for Hofmann thickness planer 210 mm wide Rodpfxok I Si Hj Ab Eecd Diameter 75 mm Internal hexagonal bore 9 pieces available

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 27 mm Rjdpfszp Iu Sjx Ab Eecd dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Condition: good (used), Year of construction: 1980, Bandsaw AUGUST MÖSSNER SS7/591, serial number 24352, manufactured in 1980. Redpfezqcmljx Ab Eecd

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 400 mm, Offer for automatic bandsaw SBA 361: P-CNC-FORTE-SBA361 Dear Ladies and Gentlemen, We are pleased to be able to offer you our high-quality FORTE SBA 361 automatic band saw from 2002. The machine is in used condition. Technical data - Maximum workpiece diameter: 400mm - Feed roller conveyor - Rsdpfst I Emvox Ab Eecd Automatic with bar feed - Space requirement approx. (height/length/width): 270 cm / 500 cm / 300 cm Price net 26.000 € VHB

Condition: as good as new (ex-display), Year of construction: 2025, Panhans bandsaw BSB 500 Upper and lower APA II bandsaw guides Tilting table top up to 45° Door locking system via limit switch Wheel diameter 500 mm Drive motor 1.5 kW / 2.0 hp 400 Volt motor with motor brake Band speed 1,290 m/min Maximum cutting height 320 mm Maximum cutting width 485 mm Maximum blade length 4,145 mm Rjdpfx Abodq D I Ho Eecd Table size 500x680 mm Table height 890 mm Dust extraction port 2x100mm Space requirement: 900x525x1925 mm Weight 220 kg CE compliant, GS tested Available in stock at 54634 Bitburg

Condition: new, Year of construction: 2025, machine/vehicle number: C890, PANHANS Bandsaw Type BSB 600 Stand in modern steel construction, table top made of thick-walled, heavily ribbed cast iron, massive gray cast iron bandsaw wheels Technology: • Upper and lower PANHANS bandsaw blade guide APA II • Finely planed gray cast iron table • Table top can be swivelled up to 20° • Dynamically balanced bandsaw wheels with vulcanized rubber coverings • Fence rail can be used on the left of the saw blade • Fence profile can be folded over • Blade tension indicator • Mechanical height adjustment via handwheel with locking ratchet • Automatic motor brake with main switch and motor protection switch Technical data: • Max. cutting height 380 mm • Max. cutting width 570 mm • Table size (W x D) 590 x 810 mm • Table height 905 mm • Wheel diameter 600 mm • Motor power 2.2 kW Rcedpebzmb Hsfx Ab Eod • Wheel speed 820 rpm • Max. saw band length 4710 mm • Suction nozzle diameter 2 x 100 mm • Machine weight 272 kg • Machine size (L x W x H) 1120 x 750 x 2125 mm Location: Available in stock, Bitburg Top exhibition price Free loading

Condition: new, Year of construction: 2026, Feed unit with a consistent feed rate and no power loss Metal gearbox with hardened gears Metal cover for the feed rollers Right-hand and left-hand operation Powerful motor Durable PU feed rollers Tripod with extended outrigger arm as standard Rsdocnxmzspfx Ab Eocd Individually adjustable for horizontal and vertical use With counter Model VSA 48 L Article no. 5115500 Technical data Max. outreach 1050 mm Number of feed rollers 4 Roller diameter 120 mm Roller width 60 mm Roller travel 25 mm Speed stages 8 Speeds 2/4/5.5/6.7/11/13/16.5/33 m/min Motor power 0.75 kW Connection 400 V / 50 Hz Weight 65 kg