TWIN resaw very nice construction. Real solid and hydraulic controls.
Bvnbc0wg
Wheel diameter 1.100 x width 120 mm for saws up to 135 mm max width off sawblade.
2 head rigs are mobile and sliding on steel support with hydraulic powering.
MUDATA setworks.
Machine equipped with feeding rolls on top off the lumber. This can work as return of the board for next cut.
With 1 x straight face at right, the machine can use its drive wheel on left to make next cut pushing the board to the movable gui...
Welded steel frame
Perfectly balanced cast iron wheels mounted on closed ball bearings
Cast iron table tilting up to 45 ° (20 ° CE) to the right.
Telescopic protective tape guide
Automatic wheel braking (ce): self-braking motor in ø600 / 700 mm and air braking in ø800 / 900 mm.
Motor protection switch with coil release (CE).
The key that locks the door.
Belt tension indicator.
Precise top belt guide.
Mv8hh8
Bottom belt guide with wooden inserts.
Safety switch (CE): on CO600 / 700 it is located o...
Complete with main motor
Blks3tr3ua
band saw according to CE and with the following features
strong cast iron work table, inclinable
balanced cast iron fly wheels
saw blade guide, telescopic
saw blade tensioning indication
upper and lower saw blade guide
cleaning brush for the lower fly wheel
sturdy AL fences
max saw blade width 16 mm
suction connection under the table
micro switches on machine doors
work table dimensions 600 x 520 mm
working table height 900 mm
fly wheel DM 450 mm
Dnurgknkw
fly wheel speed 700 U/ min
max cutt...
Band resaw
Make : STENNER
Model : VHJ 105
Wheel diameter : 1.100 mm (43 inch)
Nbdjf
Width of wheel : 110 mm for sawblade width 130 (5”)
This machine has a tilted fence
Main motor : 22 kW (30 HP) CAUTION ! 220 volts 3 phase !
Currently no starter
Complete with a total of 77 bandsawblades.
A versatile saw for cutting wood for veneers, lamellas and the like. Height of workpieces up to 400 mm. The powerful feed rate gives a very high performance.
The R800 is a solid saw. In the R800, it is possible to use tapes of different widths. It is equipped with a mechanical feed of the workpiece. It is designed so as to easily cope with work in conditions of high load of the main engine and high processing speed (up to 30 m / min). It is possible to use a tape with a width of 80mm. The sturdy...
Thin layer from 2 mm thickness
Maximum cutting accuracy up to ± 0.15 mm
Minimal kerf, cutting thickness from 1.3 mm
Ideal for the cutting of dried and wet wood or alternative materials
Surface of the thin layer ready for gluing without need of further processing steps
Friendly user electronic control
Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life
Optical sensor to start cutting cycle and speed change
Ground table
“Flexam” belt feed...
Wheel diameter 1.250 x width of blade 6 inch (155 mm) . Main motor 30 KW (40 hp ) with double rotation speed. Super condition .
Be82ru2cmx
Diameter of saw wheels mm 800
Max. cutting height mm 400
Stationary working table mm 1290 x 800
Max. blade width mm 54 x 0,9
Max. and min. blade length mm 5530 / 5380
Motor power Kw 15 (HP 20)
Sawdust hoods nr Nr. 2 Ø 120 Nr. 1 Ø 100
Compressed air consumption (wheels braking and feeder opening) bar 6
Net weight Kg 880
Mlmxw77x
Feeder
Height of feeding carpet mm 300
Length of carpet fence mm 750
Idle rollers dia. mm 160
Max. rollers-blade clearance mm 200
Max. fence-blade clearance mm 200
Vari...
Latest technology and performance: WRAVOR WRC 1150 AC band saw from WRAVOR to achive:
- maximum cutting capacity.
- minimum labour.
- faster hydraulic functions for log manipulating, possible new patented system for logturning systems.
- the fastest moving head with saw with special Servo Drive system - on demand!
- many options of equipment on the saw.
- construction improvements.
Bhcbogws
- high degree of automatization with Siemens program or Unitronics, always with option with manual control...
Primultini 1100 band sawing line with cut-off or centre cutting device
the mechanization is from Jonab AB and consists of:
-lifting table
- Slat removal belt
- Cross conveyor
- Conveyor belt feed to the machine left or right
Please also visit my other advertisements.
Gtek3bywq
I look forward to your inquiry.
Technische Daten:
fly wheel DM 800 mm
Max. cutting height 400 mm
Max. max cutting width 780 mm
tabel dimensions 580 x 810 mm
tildable table 15 Grad
Max. saw blade dimension 80 x 0,8 mm
saw blade length 5380 - 5530 mm
motor 11,0 kW, 400 V, 50 Hz
suction 2 x 100 mm
fly wheel speed 680 U/ min
suction DM 1 x DM 100 mm & 2 x DM 120 mm
compressed air 6 - 8 bar
machine weight: ca. 850 kg
machine dimensions L x B X H 1550 x 950 x 2500 mm
welded steel structure, fully closed
pneumatic brake
table i...
Conveyor belt, belt conveyor, conveyor belt, belt conveyor
-Speed: 0.8 m/sec
Beudhxnkbn
-Drive: 0.12 kW
-Belt width: 790 mm
-Length: 605 mm
-Body made of: aluminum
-Transport dimensions: 950/630/H955 mm
-Weight: 58 kg
ID000275Used mobile automatic strapping machine - manufacturer Band-A-Matic, - model F20, 220 volts,- mobile on 4 wheels, - dimensions (LxWxH) 900mm x 600mm x 750mm,- 2pcs you need more information about the equipment, please contact our manager.
N2dln
Band saw with feed CB 900
- after the technical review
- very good condition
TECHNICAL SPECIFICATIONS:
engine power 12.6 kW
max. cutting height 460 mm
cutting height with a feed of 240 mm
max. cutting width 680 mm
cutting width with a feed of 130 mm
max. workpiece width 330 mm
O2iu7
max. belt width 80 mm
10 types of feed speed 2.5 / 4/5/7/8/12/14/19/24/38 m / min
table top dimensions 970 mm x 810 mm
adjustable table top
double-sided tape guiding
table top height from the base 1000 mm
machine...
Width belt: 650mm, length belt: 2500mm, capacity: 70kg max., height frame: 80mm, as good as new.
Cd07jgcu
HOLZMANN HBS 500 band saw
Manufacturer HOLZMANN
Model / type of the HBS 500 machine
Production year 2014
Machine category Band saw
Location
Gorzów Wlkp.
Conditions of delivery
OWN COLLECTION
Iejqh3r
Cost of delivery
Customer cover
Startup Type
to be agreed
Description
Comments
2.2 kW ENGINE, 500 mm WHEEL DIAMETER, TABLE SET AT ANGLES, VERY GOOD CONDITION, ADDITIONAL SAWS AS TOOLS
Conveyor with internal drive 1000x120 mm with adjustable speed.
Bozkd2mvbd
We have 6 pcs for sale.
cutting diameter 460 mm
saw band length 5200 x 41 x 1,3 mm
cutting width 460 mm
cutting capacity - flat 470 x 460 / 90° mm
cutting capacity - round 460 / 90° mm
speed 20 - 100 m/min
voltage 400 V / 50 Hz
sawing motor 4 kW
total power requirement 4,7 kW
weight of the machine ca. 1,665 t
dimensions of the machine ca. 2100 x 1300 x 850 m
Nlnh7
full-automatical band saw,
Accessories:
Inverter for controllable speed,
automatical stop function after sawing and on breakage of the saw blade,
a...
cutting diameter 250 mm
Nndbp
saw band length mm
cutting width 250 mm
automatic feeds
weight of the machine ca. 0,6 t
cutting diameter 510 mm
saw band length 9800 mm
cutting width 1020 mm
dimensions of saw-band 9800 x 67 x 1,6 mm
work height max. 750 (630) mm
capacity 90 degrees: round 510 mm
capacity 90 degrees: flat 1020 x 510 mm
capacity 60 degrees: round 500 (400) mm
capacity 60 degrees: flat 500 (400) x 510 mm
capacity 45 degrees: round 510 mm
capacity 45 degrees: flat 750 (670) x 510 mm
cutting length min. ca. 30 mm
cutting speed 15 - 150 AC m/min
down speed 0 - 300 stufenlos mm/min
cutting pressure stufe...
cutting diameter 225 mm
saw band length 2480 x 27 x 0,9 mm
capacity 45 degrees: round 150 mm
capacity 45 degrees: square 150 x 150 mm
capacity 60 degrees: round 85,0 mm
Bssxngjz79
capacity 60 degrees: square 85 x 85 mm
table height 980 mm
turning speed range: 20 - 90 m/min
total power requirement 1,5 kW
weight of the machine ca. 300 kg
dimensions of the machine ca. 1380 x 705 x 1500 mm
Furnishing :
- Stepless speed regulation
- frequency converter
- Coolant collecting pan and coolant device
-...
Wood band saw, band saw, table band saw, firewood saw
-Drive: 0.55/0.88 kW
Ptjqty
-Motor speed: 56/110 rpm
-Two cutting speeds of: 450/900 m/min
-Table size: 450 x 785 mm
-Roll diameter: 600 mm
-Max. Cutting height: 240 mm
-Max. Cutting width: 600 mm
-Number: 1x band saws available
-Price: per piece
-1x dimensions: 1500/1000/H1600 mm (machine on large stand)
-1x weight: 290 kg
-1x dimensions: 1260/700/H1590 mm
-1x weight: 208 kg
Optimum Optisaw SD 500
Double mitre metal band saw
with swivelling saw bow
Art. no. 3292380
Bq2grblqhy
length approx. 2122 mm
width/depth approx. 1046 mm
Height approx. 1497 mm
Weight approx. 522 kg
Electrical data
Motor power coolant pump 100 W
Total connected load 3.8 kW
Supply voltage 400 V
Mains frequency 50 Hz
Machine data
Saw band speed(s) 35 / 70 m/min
Saw band length 3770 mm
Saw band width 34 mm
Saw band thickness 1,1 mm
Cutting angle 45 - -60 °
Feed Hydraulic via lowering cylinder
Lifti...
Flexible band resaw with tiltable conveyor
Heavy duty, modern resaw with impressive features :
Cast iron dynamicly balanced wheels
Hydraulic blade tension
Inverter controlled feed system
Automatic pressurised lubrication system with reservoir tank
External control panel
O8f77
18.5 KW motor - latest IE-3 energy efficient
Tilting conveyor up to 45 degrees
* very suitable for shiplap cladding, wall cladding *
Maximum material size (W X H): 300mm x 300mm
Feed speed (variable): 0~18 m/min
s...
cutting diameter 500 mm
saw band length 1.800 mm
table height 1.100 mm
rotary indexing table -manual operation
Nndbf
weight of the machine ca. 0,9 t
cutting diameter 360 mm
saw band length 5734 mm
cutting width 600 mm
360 mm
360 x 400 mm
20 - 130 m/min
10 mm
5,5 kW
850 mm
8 kW
6,5 x 2,2 x 2,0 m
2,5 t
Automatic band saw with
- Roller conveyor driven 3000 mm
Iy2zg9yea
- Roller conveyor without drive 1400 mm
- Kühlmtteleinrichtung
- 45 ° right / left
- Operating voltage 400V
Semi-automatic = automatically lower, lift, open vise, no material feed
cutting diameter 220 mm
saw band length 2455 mm
table height 800 mm
cutting width 230 mm
cutting speed 35 + 70 m/min
dimensions of saw-band 2455 x 27 x 0,9 mm
90 mm
90 mm
90 x 100 mm
150 mm
150
150 x 210
220 mm
210 mm
230 x 185
total power requirement 1,2 kW
weight of the machine ca. 240 kg.
dimensions of the machine ca. 1,2 x 0,6 x 1,7 m
Furnishing:
Beobqrtidm
- Miter cuts up to 60 ° left
- cutting speed 35/70 m / min.
- Vice with quick clamping device
- Saw band guide made of ha...
Butcher Band Saw, Butcher Band Saw, Band Saw Stainless Steel Bone Saw
-Saw width: max. 160 mm
-Saw height: max. 200 mm
-without a band
-back gauge
Hhyiw3hw3
roll diameter 400 mm
throat 280 mm
workpiece height / mm
Bt3tsewywz
total power requirement / kW
weight of the machine ca. 0,4 t
dimensions of the machine ca. 1100x650x1700 m
roll diameter:525 mm
throat:520 mm
workpiece height:310 mm
table-size:600x500 mm
saw band length:3840 mm
I38lrde3e
cutting diameter max. 360 mm
speed 20 - 100 m/min
Bov899ypbv
total power requirement 400 Volt
weight of the machine ca. 2 t
280 mm
4670 mm
280 mm
4670 x 38 x 1,3 mm
280 mm
280 x 280 mm
15 - 150 m/min
6,5 kW
2,0 x 2,0 x 1,5 m
2800 kg
Bmgfwrcish
cutting diameter 240 mm
capacity 90 degrees: square 200 x 200 mm
capacity 90 degrees: flat 285 x 200 mm
capacity 45 degrees: flat 200 x 200 mm
capacity 45 degrees: round 200 mm
capacity 60 degrees: round 130 mm
capacity 60 degrees: square 130 x 140 mm
dimensions of saw-band 2965 x 27 x 0,9 mm
cutting speed 37 - 74 m/min
work height max. 940 mm
total power requirement 1,3 kW
weight of the machine ca. 290 kg.
range L-W-H 1.250 x 1.500 x 1.700 mm
Furnishing:
- Miter cuts left 60 ° + 45 ° right
-...
Metal band saw, band saw machine, automatic band saw
-Transfer: in the current condition as seen
-Machine: has problems with the control and is therefore sold as a spare parts carrier
-hydraulic material clamping:
2pwkxq
-Cutting area:
-90° around 420 mm
-90° flat 420 x 420 mm
-Material feed: multiple stroke
-Saw speed: 16-105 m/min
-Saw blade length: 6280 x 38 x 13 mm
-Automatic material detection:
-Cutting pressure regulation: hydr. stepless
-Dimensions: 3700/2300/H2130 mm
-Weigh...
Control CNC
range L-W-H 2260-2257-2304 mm
feed length 10 - 9999,9 mm
Bvzieinp
weight of the machine ca. 3,5 t
cutting width max. 250 mm
automatisch
chip conveyor
documentation
Bojaguifj2
weight of the machine ca. 1,2 t
cutting diameter 330 mm
saw band length 4570 mm
cutting width 400 mm
capacity 90 degrees: round 330 mm
capacity 90 degrees: square 330 mm
Bjuizecp23
capacity 90 degrees: flat 400 x 330 mm
dimensions of saw-band 4570 x 34 x 1,1 mm
cutting length min. 8 mm
work height max. 800 mm
total power requirement ca. 4 kW
weight of the machine ca. 2,4 t
dimensions of the machine ca. 2,2 x 2, 3 x 1,8 m
Breite 200 mm
cutting diameter 225 mm
saw band length 2480 mm
table height 910 mm
capacity 90 degrees: flat 245 x 150 mm
capacity 90 degrees: square 200 x 200 mm
capacity 45 degrees: round 160 mm
capacity 45 degrees: square 160 x 160 mm
capacity 60 degrees: round 100 mm
capacity 60 degrees: square 100 x 100 mm
turning speed range: 45/90 m/min
dimensions of saw-band 2480x27x0,9 mm
Nlohp
total power requirement 1,5 kW
weight of the machine ca. 200 kg
dimensions of the machine ca. 1430x720x1700 mm
Scope of de...
Metal band saw blade, band saw blade, metal saw band
-Metal saw band: unused
-Dimensions: 5000 x 34 x 1.07 x 2/3 - VPVR
-Weight: 1.4 kg
Cqhibqfai
cutting diameter 140 mm
saw band length 3.000 mm
- - - - - - - - -
Eaqbfibxw
The KASTO - MH 1,8 band saw is in good condition.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags:
miter ja
N2qlv
weight of the machine ca. 370 kg
cutting diameter 520 mm
saw band length 7239 mm
cutting width 1,3 - 2 mm
capacity 90 degrees: square 520 x 520 mm
cutting speed 20 - 130 m/min
cutting pressure adjustable
cutting lenght max. 600 mm
Pitch min/max multiple (9x) 4500 mm
feed: yes
coolant yes
total power requirement 10,5 kW
Bebzcexxcr
weight of the machine ca. 4400 kg
dimensions of the machine ca. 4,0 x 2,0 x 2,0 m
- with chips clearing
- chip conveyors
- driven roller conveyor 3000mm
- 1200mm roller conveyor
- material stres...
cutting diameter 250 mm
capacity 90 degrees: flat 280 x 220 mm
capacity 90 degrees: square 220 x 220 mm
capacity 45 degrees: round 230 mm
capacity 45 degrees: flat 220 x 200 mm
capacity 45 degrees: square 200 x 200 mm
capacity 60 degrees: flat 140 x 100 mm
capacity 60 degrees: square 100 x 100 mm
capacity 60 degrees: round 110 mm
vice 285 mm
turning speed range: 36/72 m/min
saw band length 2.950 x 27 x 0,9 mm
total power requirement 1,5/1,8 kW
weight of the machine ca. 440 kg.
dimensions of the ...
Metal band saw blade, band saw blade
Blirnsr
-unused original packaging
-Number: 7x sheets available
-Price: per piece
-Toothing: 4/6 K-POS
-Dimensions: 2835/27/H0.9 mm
-Weight: 0.6 kg/piece