The US-2000 FAB-A (In-line stacking and banding off folder) can be attached to folding machines and saddle stitchers of all manufacturer.
The variable infeed height from 630 up to 940 mm allows a connection behind buckle folding machines or knife folder
Kwv778g2
modules. Good accessibility and overview simplify the handling. The format adjustments from 1-up to 7-up production is very easy and can be realised within a few minutes.
ATS banding machine with infeed and outfeed conveyor belt
Mv0crc
sheet size 360x260 mm
band width 30 mm
Options included in machine:
- 1D interface with software for potential-free signal exchange
for upstream and downstream machine
- 6D Control panel integrated in folding plate
- 7A Light (LED) top left on sheet: green = operation; red = fault
- 11A Unwinder extendable with quick threading (up to 360mm
sheet width or up to 1,500mm total sheet circumference, 1 roll)
- 15A "end-of-sheet pre-sensi...
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container
-With the premelting device, you always have enough hot melt adhesive available
-Manufacturer: ENA
-Type: 15-259
Vsme3y
-electrically heated
-Dimensions: 580/220/H570 mm
-Weight: 18.7 kg
One-sided automatic edge banding machine with pre-milling
unit, direct glue application to straight workpieces (EVA-PUR
Glue pot with run-out function/optional), HF-cut-off saw station,
HF-top and bottom milling unit, chain feed, double roller
top pressure, extendable work piece support, signal lamp
for work piece sequence and synchronisation of working units
by encoder. For ABS, PVC, melamine and strong wood veneer
roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm
and of 8 – 60 mm wo...
Compact edge banding machine Hebrock F2 with folding, scraper and only 954 Bh.
edge thickness max. 2mm
workpiece height approx. 10 - 40mm
feed rate approx. 7m/min
noise protection hood
extendable workpiece support
suction connection 1 x 120mm
aggregates:
Upper pressure manual adjustment with SIKU-counter
inlet ruler manual adjustment with SIKU-counter
Edge strength manual adjustment with SIKU-counter
milling with slide mills
gluing part with automatic edge infeed for roll material up to 2mm
pres...
Used machine
Btttntmkt8
Year of manufacture: 2013
Machine was completely overhauled
new DIA pre-milling cutter
new Glue Jet 301 glue system
all aggregates checked
all cutters sharpened
all knives changed
- electrics for stepless feed 400 V / 50 Hz, 2,2 KW
- motorized pressure bridge adjustment
- automatic chain lubrication
- control PPC 315 with 15" touch screen
- ECO MODE energy saving mode
- infeed ruler 1350 mm, motorized adjustable
- Joining milling unit 1802 (2 x 2,0 kW, 200 Hz, 12000 mi...
0,4-8 mm
Workingpiece thickness from to 8-50 mm
Total length 4376 mm
Bud2sqctbj
Feed speed 12 m/min.
total power requirement 8 kw
Weight 1200 kg
SPECIAL OFFER - SPECIAL OFFER - SPECIAL OFFER
- Ultra-Sonic 2000 A (ultrasonic welding process)
Btvr7bm2jt
- Can be switched to soft tension with a simple push of a button
- With unwinding station for large rolls
- Frame size 90 x 36 cm
- Strip width 30 mm
- Connected load 230 / 50 HZ
Immediately available from stock. Inspection and test run possible.
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container
-With the premelting device, you always have enough hot melt adhesive available
-Manufacturer: ENA
-Type: 4-060-15-0600
-electrically heated
-Dimensions: 470/175/H385 mm
-Weight: 20.3 kg
Bdttqnjwav
609fc0d3a9042
Glvqbsd
Edge bander
Bt9ddsbmfw
OTT Profimatik M 259-FÜ
Year of construction 2000
400V
22kW
Maschine No. M / 53052
Used machine
Year of manufacture 1991
3442 operating hours
strong chain belt feed with precise, maintenance-free guidance
feed speed infinitely variable 8-24 m/min
minimum workpiece width 60 mm
maximum gluing height 60 mm
fast heating basin with electronic temperature control
Jceomk7
strong pressure zone with 1 large driven roller and 6 holding pressure rollers
20 mm solid edge thickness
central control panel at machine infeed side
automatic roll magazine for edges from the roll with
pneumatic c...
0,2 - 6 mm
Workingpiece thickness from to 8 - 42 mm
Total length 5300 mm
total power requirement ca. 12,5 kw
Weight ca. 2100 kg
Buhirl9s87
Year of manufacture 2014
Edge thickness max mm 8
Thickness roll material max mm 3
Suitable for PUR glue / EVA glue
Vudvfm
Joining unit
Corner copying unit 1 motor
Scraper unit profile and flat
Aggregates clocked NC-axis(s)
Machine length mm 4685
Further technical data
FRAVOL SYNCRO
Edge height max mm 60
Height adjustment motorized
Glue system Granulate pre-melting container
Spraying device
Crosscut saw unit 2 motors
Flush/radius/fase stations 1
Smoothing unit hot air
Buffing unit
Left-hand machi...
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container
-with: the premelting device you always have enough hot melt adhesive available
-Manufacturer: HOMAG
Bdttqw02uw
-Type: 1-006-42-0002
-Type: 1-006-42-0012
-Type: 0-380-02-1197
-electrically heated
-Number: 2x glue basins available
-Price: per piece
-Dimensions: 480/165/H195 mm
-Weight: 10.6 kg
One-sided automatic edge banding machine with pre-milling
unit, direct glue application to straight workpieces (EVA-PUR
Glue pot with run-out function/optional), HF-cut-off saw station,
HF-top and bottom milling unit, chain feed, double roller
Yr7m8c
top pressure, extendable work piece support and signal lamp
for work piece sequence. For ABS, PVC, melamine and strong
wood veneer roll material as well as fixed lengths from 0.4 –
3.0 mm and of 8 – 50 mm work piece thickness.
Speed: 7,0 m/min.
• 2...
-Online-Video-Inspection by Skype-Video-
-We would be very pleased with your visit - more machines on Stock-
G8ow8ytoo
-Available Immediately - Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Used machine
year of manufacture 2001
edge thickness max mm 12
Thickness roll material max mm 3
Feed max m/min 13
Joining unit
corner copying unit 2 motors
Scraper unit
Jidgmpr
Profile scraper
Aggregates clocked
NC axis(es)
Machine length mm 7240
Machine control BRANDT POWER CONTROL PC 16
Right-hand machine
BRANDT Quicktronic
Edge height max mm 60
Height adjustment motorized
Changing places roll magazine 1
glue system granulate
pre-melting container
Crosscut saw unit
2 motors
Flush/radius/chamf...
0,4-3 mm
Workingpiece thickness from to 6-45 mm
Total length 3250 mm
Feed speed 8 m/min.
total power requirement 6 kw
Pc8fjvnp
Weight 800 kg
roll material 0,4- 3 mm edge thickness
strips 0,4-15 mm (12 mm) edge thickness
Workpiece thickness 8-60 mm
Joining unit
gluing unit A 12 PUR - hot melt and Airtec
cross-cutting station
Buux2eetse
Pre-milling unit
Multifunctional milling station
Glue joint scraper
Corner copying (front side processing)
Buffing unit
All data was taken from the data sheet, therefore without guarantee.
Technical data on request
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container
-With the premelting device, you always have enough hot melt adhesive available
-Manufacturer: ENA
-Type: 4-060-15-0600
-electrically heated
-Dimensions: 460/160/H340 mm
Damdjnd
-Weight: 19.5 kg
One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station, HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness.
• Speed: 5,5 m/min. • 1 space for finishing unit • 3,5“ Colour Touch screen
→Automatic edge feeding for roller mate...
:1-3 mm
Workingpiece thickness from to:10-40 mm
Bogyv0b7z2
Total length:5300 mm
Feed speed:10 m/min.
total power requirement:12,5 kw
Weight:1650 kg
New machine
Year of manufacture: 2021
Workpiece width min. approx. 75 mm
workpiece thickness 8 - 50 mm
workpiece length min. approx. 120 mm/180 mm for corner copying
edge thickness 0,4 - 2mm
chip removal joining unit 0 - 2, 0 mm infinitely variable
Joining unit with 2 counter-rotating, insert-controlled joining units
Diamond tools height = 55 mm
direct glue application to the workpiece, glue tank with 1,5 kg capacity
EVA/PUR glue pot with discharge function
Printing unit
cross-cut unit with HF m...
Stand-alone unit with mobile base for the use of large rolls
- More cost-effective consumables through the use of large rolls
- Rational work due to reduced roll set-up time
- Motorized paper take-off due to automatic storage filling system
- Flexible use due to mobile base
- Simple operation
- Quiet and fast
- Automatic cycle release
- Cycle release via push button; optional foot switch available
Corvho9
- Quality product " Made in Germany
- Product width 30-310 mm
- Product height 5-200 mm
- b...
EDGE BANDING machine type OCMAC HS 26 S
second hand machine
volt. 380/50
for solid wood max. 10 mm. / PVC / veneers / melamine
composed by :
Technical details :
min. panel length mm. 120
min. panel width mm. 70
panel thickness min./max. mm.10/60
edge thickness min./max. mm.0,4/10
total installed power Hp 9
composition machine :
1. lower glue pot
2. motorized roller for automatic feeding
3. edge shear
4. end trimmer unit . 2 motors Hp 0,3 . rpm 12.000
5. top and bottom ( rough ) edge trimmer...
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container
B030dfbe
-With the premelting device, you always have enough hot melt adhesive available
-Manufacturer: HOMAG
-Type: 0-380-03-0497
-Type: 2-006-51-2870
-electrically heated
-Dimensions: 400/70/H225 mm
-Weight: 10.6 kg
One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), 2-motor HF-cut-off saw station, HF-top and bottom Multiprofile milling unit, 2-motor corner rounding unit, chain feed, motorized beam pressure with encoder and ball-bearing double roller top pressure, extendable work piece support, signal lamp for work piece sequence, synchronization of working units by encoder as well as L-Motion contr...
Brandt Highflex 1440
Available from April-May 2021
Machine No. 0-261-20-6592
March 2020 completely overhauled
all programs newly run in
New software update USB+CF PC20+(2-083-80-1630
All milling cutters newly mounted and run in
Electro-hydraulic plungers replaced with new ones
The machine is immediately ready for use.
OVERVIEW OF THE AGGREGATE EQUIPMENT:
- JOINTING UNIT 2 X 2,2 KW 200 HZ
- GLUING UNIT A8
- TRIMMING UNIT CHAMFER/STRAIGHT 2 X 0,18 KW
- PNEUMATIC ADJUSTMENT CAPS CHAMFER/STRAIGHT
- ...
Second-hand machineBuilt: 1985Condition: age-appropriateMachine length 3750 mmMachine width 850 mm without roller supportMachine height 1280 mmEdge thickness 0,4 - 8 mmEdge height max. 51 mmWorkpiece thickness 6 - 45 mmFeed 11 m/min with fully automatic edge infeedWith glue application stationCross-cut unit with 2 motorsWith flush milling unitwith radius milling unitWeight approx. 750 kgAvailability: short termLocation: Röllbach
Bsbxdxt8
Stand-alone unit with mobile base for the use of large rolls
- More cost-effective consumables through the use of large rolls
- Rational work due to reduced roll set-up time
- Motorized paper take-off due to automatic storage filling system
- Flexible use due to mobile base
- Simple operation
- Quiet and fast
- Automatic cycle release
- Cycle release via push button; optional foot switch available
Pbfvv
- Quality product " Made in Germany
- Product width 30-310 mm
- Product height 5-200 mm
- Pro...
Edge banding machine for edge thicknesses up to 2mm,
incl. jointing unit with 2 motors and 2 DIA-
MANT cutter heads with pulling cut,
Buosdzq8ov
teflon-coated glue pot with electronic temperature control
temperature control, pressure zone with motor-driven
motor-driven pressure roller and pneumatic cross-cut
trimming shear for edges up to 2x44mm, HF saw trimming
with 2 saw blades, HF-milling unit incl. HW - radius cutter
radius milling cutter R=2mm, work piece scanning in the
surface and in the ...
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container
-With the premelting device, you always have enough hot melt adhesive available
-Manufacturer: HOMAG
-Type:
Eyblcevf
-Type: 2-006-52-5533
-Type: Q34
-electrically heated
-Dimensions: 385/135/H215 mm
-Weight: 7.7 kg
Contour edge banding machine up to 140 mm Work piece thickness, Speed from 2,5 - 12m/min, Quick change glue pot, Glue pot and glue roller teflon coated, Standby function, tilting machine table up to 45° and digital length counter.
Standard machine incl. the following options :
→electropneumatic pre-melting unit for 2 Kg Cartridge
→motorized driving mechanism (patented)
→supporting bars with steel balls
3otuqhxq
609fc0d3b797e
3 mm
length 4300 mm
Gxkrvw
thickness 8-50 mm
Used machine
Year of construction: 2008
Condition: completely workshop overhauled
(gluing station: new upper part 2016, new
Subpart 2019)
Location: Hochheim
Equipment details:
max. glue thickness: 8,0mm
feed speed: 8 m/min
min. workpiece thickness: 6.0 mm
Direction of panel movement: from operator to right
Heating time: 10 min
Joining unit: Yes, with 2 milling units
Autom. roll magazine: Yes
Cutting shears up to: 0.2 - 3.0 mm
Solid edge magazine: Yes
autom. gluing: glue cartridge with sensing no...
- Desktop unit
- Simple operation
- Quiet and fast
- Automatic cycle triggering
- Cycle triggering via push button; optional foot switch available
- Quality product " Made in Germany
- Product width 30-310 mm
- Product height 5-200 mm
- belt width 40 mm
- Without changeover paper banderoles (70-90g) as well as film banderoles (100-130 µm) can be used
- Output up to 23 bands/minute depending on product size
- Infinitely variable adjustment of the band tension (prevents damage to the packaged good...
Edge banding machine for gluing panel-shaped workpieces with edge material. Machine suitable for EVA
and PUR glue
MACHINE WITH 2 ADD. GLUING UNITS, 1 OF ITS FOR PUR ADHESIVE
With touchscreen control
Max. Edge thickness 3 mm
Workpiece thickness min./max. 8/40 mm
Feed approx. 10 m / min.
Equipment:
-----
Pre-milling unit with 2 motors
-----
Zwefqxpt
Gluing station with interchangeable glue basin
-----
End-trimming saw station with 1 motor 16,000 rpm
-----
Flush milling / radius milling station...
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container
-With the premelting device, you always have enough hot melt adhesive available
Gvrmjc
-Manufacturer: ENA
-Type: 4-060-15-0660
-electrically heated
-Dimensions: 410/140/H220 mm
-Weight: 8.2 kg
Contour edge banding machine for hot melt glue application to 0.4 - 3.0 mm edge material
3otk9cdp
→Direct glue application to edging material: Bottom infeed of glue granules resulting in spill proof glue pot. Quick heating-up time after machine omatic start of application roller after approx. 8-10 mins.
→Pressure roller driven by gearmotor infinitely adjustable between 0-15 m/min.
→Automatic edging feed-in and automatic cut-off operation for straight and curved workpieces via footpedal
→Pne...
- exhibition machine -
Pre-milling unit with two slide cutters,
Glueing unit,
Cutter,
Flush cross-cut unit with saw and corner rounding function,
Flush radius,
Radius scraper,
Surface scraper
----- Technical data -----
Edge thickness of rolled goods: 0.4 - 3 mm,
Thickness of strips: 5 mm,
min. / max. workpiece thickness: 8 - 50 mm,
Minimum length: 190 mm,
Minimum length without caps: 120 mm,
Minimum width: 110 mm,
Feed speed: 7 m/min.,
support plate Ø for edge material: 730 mm,
Dimension crosscu...
Used machine
Year of construction: 1983
for pre-coated edge material
Edge material up to 1,3 mm
with roller cap
Hlgcp8tvk
with flush caps with knife
with flush milling / chamfer milling top / bottom with HF motors
Location: Röllbach
availability: short term
- Desktop unit
- Simple operation
- Quiet and fast
- Automatic cycle triggering
- Cycle triggering via push button; optional foot switch available
- Quality product " Made in Germany
- Product width 30-310 mm
- Product height 5-200 mm
- Product width 30 mm
- Without changeover paper banderoles (70-90g) as well as film banderoles (100-130 µm) can be used
- Output up to 23 bands/minute depending on product size
- Infinitely variable adjustment of the band tension (prevents damage to the packaged g...
12 mm
0cwqecrz
length 6180 mm
speed 14 m/min
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine
-electrically heated
-7x heating rods a 800 WATT
-reconditioned by FavFE-MA-TECH
-2x glue basins available
-Price: per piece
-Dimensions: 190/100/H125 mm
-Weight: 3 kg/piece
Ql3lxtxl3
Glueing thickness: Strip material up to 15 mm (20 mm) Roll material up to 3 mm
Glue specification (glue pot / glue roll)
Milling station ( chamfer- flush )
Milling station 2 radius
Bupn8jki3b
reinforced trimming cylinder (for trimming from the roll up to 3 mm edge thickness)
outer dimensions L x W x H approx. 3900 x 1000 mm x 145 mm (with open hood approx. 2100 mm)
Technical data on request
touch screen,
swivelling control panel,
manual, self-clamping pressure bridge adjustment,
feed by means of transport chain,
extendable workpiece support,
diamond milling cutter in synchronous and counter-rotation,
glue pot,
stand-by function,
cross-cut saw with HF motor,
flush / radius / chamfer trimming unit,
pneumatic changeover milling unit,
milling tools with HM exchangeable plates,
blowing nozzle at the milling aggregate,
corner copying unit with HM exchangeable plates,
radius scraper with ...