ID000275Used mobile automatic strapping machine - manufacturer Band-A-Matic, - model F20, 220 volts,- mobile on 4 wheels, - dimensions (LxWxH) 900mm x 600mm x 750mm,- 2pcs you need more information about the equipment, please contact our manager.
we offer:Conveyor belt Conveyor belt The belt 300x50x115cm adjustable in height and angle, mobile on 2 stands with 2 rolls each, support in the middle, belt is functional.manufacturer: The beltTyp: 300 x 150 cmNr. 9508-0379/02Built year: ?Dimensions tape: 300 x 50 cmMass system: 300 x 70 cmHeight: 115 cmHeight: 115 cmAngle: adjustableBand speed: 4-5 m/min Mobile: yes on 4 rollersConnection: 380/220V 50 HzGear motor: RF 0.25/4-7 0.25 kW 1410 U IP 44Switch cabinet with contactor and motor protecti... more
HOLZMANN HBS 500 band saw
Model / type of the HBS 500 machine
Production year 2014
Machine category Band saw
Conditions of delivery
Cost of delivery
to be agreed
2.2 kW ENGINE, 500 mm WHEEL DIAMETER, TABLE SET AT ANGLES, VERY GOOD CONDITION, ADDITIONAL SAWS AS TOOLS more
Optimal solution for sanding workpiece up to 300 mm.
* constant tape tension by pneumatic
* use hole sanding belt because of height adjustable table by spring pressure (also for safe work with small workpieces)
* different sanding belt sizes on demand!
size of sanding belt:
300 x 2280 mm
speed of belt:
ca. 350 x 700 mm
ca. 1250 x 750 mm
280 kg more
width of the strips 150 mm
band length 1220 mm
dimensions of grinding wheel 225 mm
work table: 150 x 400 mm
Table tiltable up to 90 Grad
table surface area 150 x 130 mm
connected load frequency 230 V
total power requirement 0,75 kW
weight of the machine ca. 35 Kg
dimensions of the machine ca. 650 x 360 x 400 mm more
width of the strips 100 mm
band length 915 mm
dimensions of grinding wheel 200 x 32 mm
grinding wheel hole diameter 30 mm
total power requirement 0,9 kW
weight of the machine ca. 35 Kg
dimensions of the machine ca. 620 x 540 x 300 mm more
Hor. Belt sander Fabr. MAFAC type C 200 S
Fabr. # 86485430 built in 1986
Band size 1800 x 200 mm
2 tape speeds 10 / 20 m / min
DbA noise level 76-79
Power 1.3 / 1,7 kW
Power supply 380 V, 50 Hz
Dimensions L x W x H 440 x 930 x 1570 mm
Weight 77 kg
we offer:Conveyor belt conveyor MTF BLF ca.180x40cm H=35/65cm Band def. on 2 stands with 4 rolls each , Band is functional.Manufacturer:MTF Technik BergneustadtTyp: BLFNr. 91057005/01Baujahr: 1991Dimensions Band: 40x 180 x 35/65 cmDimensions System: 60 x 185 x dto cmAngle: adjustableBand speed: 1 m/min drivable:yes with 8 rolls 4 lockableConnection: 380V 50 HzMotor: ?Gear: ?control: no, switch cabinet see photo weight approx. 150 kgcondition. used, ready for operation, as seen, see photosThe con... more
It is a flexible and compact unit for the application of head and tail band on round and square book blocks. This extremely easy to use machine is the perfect solution for medium and small book binding companies. The head/tail band is joined to the glue strip before being applied to the book spine. Due to its working concept the machine does not require cleaning at the end of the production.
3 manual adjustments.
Automatic head/tail band applicator.
Speed ... more
solid cast iron table, tiltable
weighted cast iron fly wheels
telescopic saw blade guide
saw blade tension indicator
upper and lower saw blade guide
stable Al fence
working table dimensions approx. 990 x 685 mm
fry wheel DM 700 mm
max. cutting height approx. 405 mm
max. cutting width 680 mm
min/ max. saw blade length 5020/ 5140 mm
max. saw blade width 40 mm
motor 3,0 kW, 50 Hz, 400 V
suction hood DM 100 mm
Advise used machines:
• Technical data without obligation, ... more
a detailed description with technical data and pictures
can be found in the attached pdf file.
Cutting range round 0 degrees 300 mm
Cutting range rectangular 0 degrees 320x300 mm
Cutting range round -45 degrees 300 mm
Cutting range round +45 degrees 270 mm
Dimensions LxWxH 1.8 x 0.95 x 2.1 m
Weight 650 kg
EQUIPMENT and ACCESSORIES
swiveling saw frame from +60 to - 45 degrees more
pulley-Ø 1250 mm, opening under the blade guide about 900 mm, saw motor 37 kW, electric saw tensioner, electric saw guide adjustment, carriage length 5,0 m, 4 hydraulic clamping claws each separate movable, 4 log turner with hydraulic lifting, 4 hydraulic devices for claw distance adjustment, 4 hydraulic move off devices for the back motion of the carriage, break motor drive for thickness adjustment for two speeds, automatic lubrication pump system, heavy hydraulic feed drive incl. steel-rope, ... more
cutting diameter 300 mm
saw band length 3320 mm
cutting width 330 mm
capacity 90 degrees: round 300 mm
capacity 90 degrees: square 260 mm
capacity 90 degrees: flat 330 x 260 mm
capacity 45 degrees: round L 260 mm
capacity 45 degrees: square L 250 mm
capacity 90 degrees: flat L 270 x 200 mm
capacity 60 degrees: round 180 mm
capacity 60 degrees: square 170 mm
capacity 60 degrees: flat 170 x 170 mm
capacity 45 degrees: round R 200 mm
capacity 45 degrees: square R 180 mm
capacity 45 degrees... more
cutting diameter 260 mm
saw band length 3830 mm
cutting width 260 mm
cutting capacity - square 260 x 260 mm
dimensions of saw-band 3830 x 25 x 0,9 mm
cutting speed 17-110 m/min
material feed length 6-750 mm
height of material-table 700 mm
by multiple programming until 6750 mm
Drive: saw-motor 2,2 kW
total power requirement 4 kW
weight of the machine ca. 1,3 t
dimensions of the machine ca. 2,1 x 2,28 x 1,72 m
Condition: ready for operation
Electric 380 Volt
Cutting range tube at 0 degrees D=400 mm
Cutting area rectangle 0 degrees 400 x 400 mm
saw band speed infinitely variable 20-100 m/min
Material feed at 1x = 490 mm
Material feed min. 3 mm
Cut-off length min. 10 mm
Remnant length 50 mm
Dimensions LxWxH 2.6 x 2.15 x 2.05 m
Weight 1300 kg more
cutting diameter 330 mm
saw band length 4570 mm
cutting width 400 mm
capacity 90 degrees: round 330 mm
capacity 90 degrees: square 330 mm
capacity 90 degrees: flat 400 x 330 mm
dimensions of saw-band 4570 x 34 x 1,1 mm
cutting length min. 8 mm
work height max. 800 mm
total power requirement ca. 4 kW
weight of the machine ca. 2,4 t
dimensions of the machine ca. 2,2 x 2, 3 x 1,8 m
Breite 200 mm more
Horizontal bandsaw JAESPA type W 260 G
machine # 17251 Year of construction 1994
Cutting range flat 90° 410 x 200 mm
Cutting range flat 75° 350 x 125 mm
Cutting range flat 60° 300 x 160 mm
Cutting area flat 45° 250 x 80 mm
Cutting area flat 30° 165 x 125 mm
Cutting range square 90° 260 x 260 mm
cutting range square 75° + 60° 260 x 260 mm
Cutting range square 45° 220 x 220 mm
Cutting range square 30° 150 x 150 mm
Band saw blade size 3660 x 25 x 0,9 mm
Material support he... more
The Machineseeker Trust Seal gives buyers the ability to detect at a glance whether they are dealing with a trusted seller or not .
What do we verify?
Check of trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of accessibility to main phone number.
Credit report may not contain negative criteria.
Buyer complaints can lead to withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no entitlement to the grant of the Machineseeker Trust Seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.