Used Band Saw Machine for sale (85,011)

Condition: used, Year of construction: 2008, functionality: fully functional, Used fully automatic band saw from the premium manufacturer Behringer. The saw was only recently purchased but is unfortunately much too large for our applications. Description of Behringer HBP 413A Machine Description: Behringer HBP413A High-Performance Band Saw Machine The Behringer HBP413A automatic band saw is an efficient metal bandsaw for automated 90° cuts, suitable for professional use in industrial and trade production environments. Iodpjxdc Snjfx Ag Dsa The HBP413A automatic band saw has a round cutting range from 10 mm to 410 mm and a flat cutting range from 10 x 8 mm up to 500 x 400 mm, with a saw blade dimension of 5,800 x 41 x 1.3 mm. The frequency-controlled band drive provides a motor power of 4 kW and offers a steplessly adjustable cutting speed from 20 – 140 m/min (66 – 459 ft/min). The cutting speed can be set and read out directly on the control panel. The total drive power is approx. 7 kW. Weight: 2,350 kg Dimensions (L x W x H): 1,950 x 2,950 x 2,550 mm Saw blade dimensions: 5,800 x 41 x 1.3 mm Round cutting capacity: 10 - 410 mm Flat cutting capacity: 500 x 400 mm Cutting speed: 20 - 140 m/min Saw feed control Saw frame adjustment The machine is available immediately. It has only 4,800 operating hours and is currently being completely overhauled by Behringer. All wear parts, carbide guides, new bandsaw blades, as well as parts of the electrical system and hydraulics have been replaced at a cost of nearly €4,000. Original invoices from Behringer are available.

Year of construction: 1988, condition: good (used), machine/vehicle number: 388236, Part number MA1160 Manufacturer Behringer Type HBP 220 A Year of manufacture 1988 Machine-No. 388236 Length [mm] 1500 Width [mm] 2400 Height [mm] 800 Weight [kg] 1500 Connected load [mm] 380 Working range [mm] Round 220 Automatic feed YES Gear [rpm] 20-140 Saw blade diameter Isdjlkdd Hopfx Ag Dsa 3720 X 32 x 1,1mm Cutting area 350 X 220mm

Condition: good (used), Alber sharpening machine for band saw blades saw blade width 50 - 206mm tooth pitch 20 - 50mm Ijdpfjglui Asx Ag Dja

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2021 102 14, Offer 25300 Technical specifications: Isdpfxjxup Tts Ag Dea - Manual band saw - Saw band dimensions: 2750 x 27.0 x 0.9 mm - Infinitely variable cutting speeds: N 15 / 90 m/min - Max. clamping capacity: 355 mm - Mitre adjustable left and right up to 30° - Cutting range: - 90°: - round: 255 mm - square: 190 mm - flat: 310 x 190 mm - 45° left & right: round 215 mm - Drive: 400 V / 1.5 kW - Coolant system - Weight: approx. 350 kg - Space requirement: approx. W 700 x H 1600 x D 1700 mm

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, metal band saw machine -Manufacturer: Pehaka, horizontal band saw automatic band saw -Drive: 0.8 kW -Cutting data flat: 320 x 150 mm -Cutting data square: 150 mm -Saw blade speed: continuously adjustable, 20 - 195 m/min -Saw band: approx. 3700 mm -Coolant system -Dimensions: 1800/940/H1310 mm Isdpfx Aehwxb Tjg Doa -Weight: 528 kg

Condition: as good as new (ex-display), Used block bandsaw CTR520, demo machine at a special price, for logs up to 63 cm diameter, manual cutting sequence, highest cutting accuracy, height adjustment via hand crank, fitted with bimetal saw band for all wood types, max. log diameter 600 (520) mm, max. board width 460 mm, motor output S1 4 kW, standard cutting length 3.6 m, saw band 3110 x 27 x 0.9 mm, extension section cutting length 2.25 m, weight 218 kg, CE, 3 kW S1, 218 kg. Extras not included in price. (Sample image) Iedpfx Agevrvq Rj Dja

Condition: good (used), functionality: fully functional, BOMAR STG 320 GA Fully automatic bandsaw machine Cutting capacity 90° diameter 320mm, flat 510x320mm 45° diameter 320mm, flat 310x310mm 30° diameter 230mm, flat 210x210mm Continuously adjustable forced hydraulic sawing pressure Automatic cutting pressure compensation Feed clamp stroke of 600mm Entry of up to 99 different lengths and quantities via keypad Hydraulic material clamps (clamp moves full stroke) Separate coolant unit Continuously variable sawing speed 20-90 m/min, digitally displayed Machine dimensions 2400x1800x1800mm Machine weight 1300kg Ijdpfx Agexmba As Doa Year of manufacture 2001 Financial information VAT/margin: Margin: The displayed price includes VAT (VAT is not deductible for businesses)

Condition: used, Year of construction: 2025, Band saw for metal, with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Universal CORMAK BS 712 A band saw with CE marking is a trusted solution for metal cutting, unparalleled for years. Features high efficiency and easy handling. Makes it possible to cut in vertical plane and perpendicular to the cut material axis, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Technical data Cutting band size 2360×27×0.9 mm Band tension mechanical (manual) Band speeds 22, 33, 45, 65 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Power supply 3-phase 400V Main motor power 1.1 kW Weight 190 kg Angle 0°.....180 mm....300×180 mm.....180×180 mm 45°.....130 mm....120×125 mm.....125×125 mm Machine construction Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Due to swivel vice it is possible to cut material at 0°–45° angles. Iedpswl Ea Tofx Ag Doa Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. WARNING ! 2 ITEMS AVAILABLE: 1. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER ,COMPLETE, ASSEMBLED (poz. 518) 2, MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER AND BELT COVER, ASSEMBLED (poz. 517)

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Ijdpfx Aed Sr Siog Dea

Condition: used, Year of construction: 2009, machine/vehicle number: 150006, Offer 25301 Technical Data: - Cutting capacity at 90° round: 280 mm - Square: 280 x 280 mm - At 45° round: 240 mm - Square: 210 x 210 mm - Saw band dimensions: 3400 x 27 x 0.9 mm - Infinitely variable cutting speed: 20 to 100 m/min - Hydraulic raising and lowering of the saw frame - Infinitely variable cutting pressure adjustment: 0 to 10 m/min - Total drive power: 400 V / 1.7 kW - Coolant system - Stop - Required space approx.: W 900 x H 1100 x D 1800 mm Iodpfextmzlex Ag Dsa - Weight approx.: 550 kg

Condition: new, Band saw machine Make: OPTIMUM Isdpfedynpcjx Ag Dja Model: S 275 NV Art.Nr.: 3300265 Condition: new machine Section (round): 225 mm Cutting speed: 20-90 m / min equipped as standard with: -Horizontal vise -Back fence - automatic shut-off after the end of the cut -Späneräumbürste -Coolant system -Manual

Condition: as good as new (ex-display), Demonstration Machine The professional block bandsaw for logs up to 100 cm in diameter from Forestor Pilous is the result of decades of sawmill tradition, specifically designed for professional sawyers. Equipped with a telescopic lever log turner, log lifter, and a powered log lifter for horizontal log feed. Features 5 hydraulic angle stops and 2 log clamping devices. The saw is standard for logs up to 7.6 m long and can be extended on request. Automatic feed with stepless speed adjustment. Electric height adjustment controlled from the operator panel. 8.4-inch touchscreen LCD for height settings, with two speeds for height adjustment. Includes stationary operator panel. Automatic rapid return. CE certified. Technical Data: Max. log diameter: 1000 mm Max. board width (plank width): 850 mm Ijdpfsvrvqwex Ag Dea Max. saw blade rise: 875 mm Min. cutting height: 30 mm Max. frame clearance: 450 mm Cutting length of base section: 7.6 m Extension section length: 3 m Saw blade drive: 15 kW Portal travel motor: 1.5 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5350 x 35 ÷ 40 x 0.9 ÷ 1.1 mm Weight of base version: 2580 kg Extras not included in the price. (Image for reference only)

Condition: good (used), Year of construction: 2003, functionality: fully functional, - Cutting range 90° round/flat: 335 / 500x335 mm Iedpfxexg Hr Do Ag Dea - Mitre right 45° round/flat: 330 mm / 320x335 mm - Mitre right 30° round/flat: 200 mm / 200x335 mm - Mitre range 90° to 30° - Bundle clamping width/height: 0-500 mm / 15-335 mm - Material feed single/multiple: 0-600 mm / 0-9999 mm - Remnant length manual/automatic: approx. 70 mm / approx. 110 mm - Cutting speed: 15 - 150 m/min - Cutting pressure: stepless hydraulic adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Power supply: 3x 400 V / N / PE / 50 Hz - Nominal current: 16 A - Machine weight: approx. 1700 kg - Machine dimensions W x H x D: approx. 2500 x 1900 x 2300 mm

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Ijdsmrnk Espfx Ag Doa Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Band saw shaping machine Vollmer CAS L Iodpfscvhubsx Ag Dja Feed from left to right with support frame Auxiliary feed very good condition

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: Iodpfx Aoxta N Asg Dja - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: excellent (used), Band saw grinding and setting machine VOLLMER model BN30TS Isdpehhdaxjfx Ag Dea

Condition: used, Vertical band saw PEHAKA type SM 4 make no. 27060 year of construction approx. 1980 throat 380 mm table size 620 x 480 mm cutting height 250 mm roller diameter 400 mm working height 1120 mm saw band length min. 2900 - max. 3100 mm saw band speed 22-125 m/min. infinitely variable motor power 0,6 / 0,75 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via Vario belt drive with lever adjustment and 2 motor speeds Ijdpfxsiv A U Ee Ag Dea - saw table tiltable +/- 15 - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - substructure made of U-steel 100 x 50 mm , movable with lift truck space requirement L x W x H 1050 x 800 x 1950 mm weight 355 kg good condition

Year of construction: 2022, condition: as good as new (ex-display), 1 semi-automatic high-performance horizontal bandsaw with double column guidance and 2° cutting inclination to the table support surface Make:BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm saw band size 6000 x 41 x 1,3 mm Band speed, infinitely variable 20-100 m/min. Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning Iedpfx Asm Rg H Reg Dea - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform IMMEDIATELY AVAILABLE

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol Iodpoudi Uzsfx Ag Dsa ZW580 magnetic chip collector

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min Isdpsxph E Rofx Ag Dea - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display - Swarf conveyor - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg

Condition: excellent (used), Deburring machine for band saw blades IDEAL model SM60 to remove the residual welding bead. Iodpfxoxk Tb To Ag Doa

Year of construction: 1985, condition: good (used), Offer 21135 Technical data: - Roller diameter 420 mm - throat 410 mm - max. passage height 265 mm - table size 600 x 600 mm - table left + right tiltable 15 / 30 ° each - table height from floor 1020 mm - saw blade length 3150 - 3260 mm - saw blade width 3 - 16 mm - 8 cutting speeds approx. 18 - 562 m/min - drive 400 V / 1,1 / 1,7 kW - Weight approx. 650 kg - Space requirement approx. W 900 x H 1900 x D 1000 mm Ijdjg Aid Sspfx Ag Dea - E. foot switch

Condition: good (used), Year of construction: 2008, machine/vehicle number: 6424102096, Offer No. 25101 Technical Data: - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm - Cutting range at 45° flat W 320 x H 320 mm - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw band dimensions 5090 x 34 x 1.1 mm - Cutting speed steplessly adjustable 17 - 90 m/min Iodpfx Aswpincjg Dea - Hydraulic lifting – lowering of the saw frame - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system - Infeed – roller conveyor 7000 mm - Outfeed – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Infinitely variable cutting speed 20 - 100 rpm Iedjq Evn Ejpfx Ag Dsa - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg