Used Infeed for sale (2,008)

Year of construction: 2020, condition: good (used), 1 x Jasa Pre Glued Sleever PGS1100 with SIM1000 infeed + SOM1000 outfeed Pedpfxoz Ehcfs Ac Asgt

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Pjdpfx Aez Arh Asc Aogt Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Pgedpsz En Axofx Ac Ajt Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, operating hours: 5,000 h, pressing force: 200 t, table width: 1,400 mm, table length: 3,200 mm, total length: 3,200 mm, total width: 1,400 mm, total height: 2,900 mm, overall weight: 23,000 kg, operating temperature: 200 °C, workpiece height (max.): 150 mm, temperature: 210 °C, For sale is a virtually new veneer press with an infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of manufacture 1992). The machine is in excellent condition and has seen very little use. Machine type: Continuous press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of manufacture: 1992 Location: 57223 Kreuztal Available: immediately Technical data Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Infeed: yes Psdpfownpcdsx Ac Ajgt Conveyor belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Clearance height: approx. 100 mm Preheating temperature: 200° Heating capacity: 45 kW Heating medium: oil Pressing force: 200 tons The press machine is in top condition, has seen very little use, and has been used exclusively for development projects for the past 15 years. I would be happy to send you more information and pictures upon request. The machine is available immediately and can be inspected at any time by appointment. Self-collection only! Functional video available upon request. If you are interested, I am happy to provide you with further information or arrange a viewing!

Year of construction: 2022, condition: excellent (used), functionality: fully functional, 2 x Packing lines, previously used for salad leaf, consists of; 1 x Multipond MP-14-7100-2500-J plus infeed + gantry 1 x Multipond MP-14-3800-1250-J plus infeed + gantry 1 x VH Centurion SI440 (VFFS) with printer + label applicator 1 x GIC4100 (VFFS) with printer + label applicator 2 x Loma checkweigher + metal detector combination 2 x packing tables All machinery is fully working and ready to be decommissioned Podpjz Arlhjfx Ac Aegt

Condition: used, Year of construction: 2014, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, working width: 3,200 mm, The machine has the following configuration: Number of machining units: 8 Pressure bar: With rubber belt Panel support stop: Present Overpressure: Present CNC positioning: Present Panel infeed trimming system: Present Number of units in the trimming area: 1 Number of units in the edge processing area: 6 Trimming unit Unit: Flush trimming unit Manufacturer/Model: RT30 Automatic time intervention: Present Motor power: 3.5 kW Speed: 9,000 RPM Edge banding Glue application system: EVA Heating lamps for edges: Present Edge magazine: Roller magazine Number of magazine positions: 6 Hot melt glue tank: Present Hot melt glue pre-melter: HM20 Pressure roller unit: Present Number of pressure rollers: 4 CNC positioning: Present End capping unit Manufacturer/Model: IT90-S Number of motors: 2 Maximum processing speed: 28 m/min Motor power: 0.65 kW Speed: 12,000 RPM Corner milling unit Manufacturer/Model: RF10 Number of motors: 2 Motor power: 1 kW Speed: 12,000 RPM Corner rounding unit Manufacturer/Model: AR30 Number of motors: 2 Automatic tool changer: Present Maximum processing speed: 18 m/min Motor power: 0.65 kW Speed: 12,000 RPM Edge scraping unit Manufacturer/Model: RB40 CNC positioning: Present Glue scraping unit Manufacturer/Model: RC20 Brushing unit Manufacturer/Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Speed: 1,400 RPM TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 150 mm Pedpfxsz Ekh De Ac Aegt Minimum panel width: 100 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Electrical connection power: 25 kW EQUIPMENT CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5062

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 22-121386/A, Kreyenborg USM Mixing Silo 30,000L (2022) Pgsdpoz Hdknofx Ac Ajt comprising Infeed and outfeed screw conveyors 2x big bag filling stations Kern scale

Condition: good (used), Year of construction: 2008, functionality: fully functional, KALTENBACH KDE 603 – CNC Drilling Line- Year 2008 3 spindles. Manual tool change. 12.5 Metres infeed. 12.5 Metres outfeed. Pjdpfx Asz Hd Tpsc Asgt Infeed and Outfeed Crosstransfers. 600mm Capacity Drilling diameter 6 – 31.75 mm

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 121386, Weinig automatic infeed system For continuous feeding of uniform and random length pieces into a planer/moulder with short infeed table. Flat magazine with accelerator, Workpiece dimensions: 1800 - 6100 mm Psdpfx Asyt R S Nec Aegt Touch control for forward and reverse movement 4-roller accelerator. With four driven feed rollers. The first two feed rollers are electro-pneumatically moved via light barrier. Drive motor frequency controlled 3 kw Infeed speed 10 - 120 m/min. Height adjustment to workpiece thickness manually via hand crank The accelerator is operated from the control panel fitted to the accelerator. The feed speed is adjusted by a potentiometer with digital readout. Transport length x width approx. 1800 x 6500 mm Possible to supply with moulder Powermat 2400, year of production 2015 The price of a complete set 69000

Condition: excellent (used), Year of construction: 2012, Weinig E3 infeed and A3 outfeed E3 Infeed Scissors lift before crossfeed. Crossfeed table to infeed accelerator. Moulder infeed accelerator. A3 Outfeed Drop leaf. Podpsx Rblpsfx Ac Aogt Crossfeed belt conveyor. Scissors lift with pack chains. pack outfeed chains.

Condition: used, Year of construction: 1995, Transnorm angled infeed outfeed rejector inlet roller conveyor 45°/90°-600-500 RA2033 Year of manufacture: 1995 discharge angle: 45° + 45° curve Nominal/external width (NB): 600 mm Useful width (NUB): 500 mm Conveyor speed: 0,68 m/s Roller diameter: 50 mm steel + conical plastic coated rollers Drive: SEW gear motor with brake Electrical data: 0,37 kW, 380-480 V center distance: 75 mm Height: 120 mm, 375 with motor Pgedsra Emlopfx Ac Aot Optionally available: Supports Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm angled inlet outlet rejector infeed conveyor 45°-700-685 RA2060 Year of manufacture: 2014 discharge angle: 45° Nominal/external width (NB): 700 mm Useful width (NUB): 600 mm ( 685 mm ) Conveyor speed: 0,97 m/s Roller diameter: 50 mm, steel rolls with rubber cover Drive: Interroll drum roller Electrical data: 24V, 2A center distance: 75 mm Height: 80 mm Length: shortest length: 900 mm, length to tip: 1700 mm Optionally available: Supports Side guide one-sided and both-sided Podpfxorc I Uzj Ac Aogt Length variation Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2017, condition: used, REF: MM6447 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Model – Compact Palletising System. Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Electrical requirements - 220 V / 50 hz / 1 phase. Pgjdszbkl Sspfx Ac Aot Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.).

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years. Podpsz Ehfajfx Ac Asgt

Year of construction: 2025, condition: like new (used), functionality: fully functional, Raytec Curiosity quality grader, previously used on salad leaves. YOM 2025 Fully working, like new Comes with infeed and outfeed 1800 mm sort width; 2K linear cameras, 12-freq Double Chlorophylle, 0.3×0.3 mm res; 7 kW; IP67 panels; Pgsdpfx Aoz Arm Soc Ast

Condition: used, Year of construction: 2008, Transnorm inclined inlet Rejector Rejector Roller spiral 45°/90°-900-800 RA2236 Year of construction: 2008 Conveying angle (WZ + WR): 45° + 45° Mean length (ML): 1150 mm Nominal/outer width (NB): 900 mm Effective width (NUB): 800 mm Conveyor speed: please contact us Roller diameter: 50 mm steel + conical plastic-coated rollers Drive: SEW geared motor Electrical data: 0.55 kW, 380-480 V Center distance: 75 mm Overall height: 120 mm, 450 with motor Overdrive with chain Optionally available: Pgodpfxori Snlj Ac Ajt Supports Lateral guide on one and both sides Frequency converter for infinitely variable speed control Ball roller table for infeed and outfeed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Log Infeed System Manufacturer: Jack Steel Pgodpfszmf I Rox Ac Ast Year of manufacture: 2019 Hydraulic log infeed system Twin-chain feed conveyor Electric control system Suitable for feeding logs to sawmill or sorting lines

Condition: ready for operation (used), Log infeed line Tähkä, equipped with a lower device for turning logs Pgodpfjxg Rvgex Ac Ast

Condition: used, HewSaw infeed conveyor Pjdpfozg Tqgjx Ac Aogt Year of Manufacture: 2011 Conveyor is missing electric motors

Condition: used, Year of construction: 2016, Transnorm angled inlet outlet rejector infeed conveyor 30°-1040-1080-1050 RA2518 Year of manufacture: 2016 discharge angle: 30° Nominal/external width (NB): 1080 mm Useful width (NUB): 1050 mm Conveyor speed: 1.0 m/s Roller diameter: 50 mm, steel rolls Drive: SEW Movimot Electrical data: 1,1 kW 50 Hz, 380V Pgjdozqa Nkepfx Ac Ajt center distance: 75 mm Height: 250 mm Straight section: 1040, 2900 to the tip of the angle Optionally available: Supports Length variation Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2022, condition: used, KOLBUS Box Line Assembler BLA 500 year 2022 For assembling box cases and boxes or box cases and flat blanks. Overview: BLA 500 box line assembler CP 500 blank placing module BP 200 twin box placing module (year 2019) BP 500 box placer SG 500 side gluer Configuration: BLA 500 box line assembler · copilot system with touch screen · device for gluing box cases · servo-controlled drive technology based on Siemens technology · infeed with cardboard feeder CF 500 · delivery via conveyor belt Technical specifications: mechanical speed: up to 40 cycles/min box case width max.: 735 mm Pedpfx Asz E Npaoc Aogt box case width min.: 205 mm box case height max.: 525 mm box case height min.: 140 mm box case thickness max.: 4,0 mm box case thickness min.: 1,5 mm CP 500 blank placing module · module for placing flat blanks on glued box cases Technical specifications: flat blank width max.: 800 mm flat blank width min.: 200 mm flat blank height max.: 800 mm flat blank height min.: 200 mm BP 200 twin box placing module (year 2019) · module for placing two boxes on glued box cases Technical specifications: box width max.: 170 mm box width min.: 100 mm box height max.: 42 mm box height min.: 20 mm box length max.: 250 mm box length min.: 100 mm cardboard thickness max.: 4,0 mm cardboard thickness min.: 1,5 mm spacing between boxes max.: 405 mm spacing between boxes min.: 140 mm BP 500 box placer · module for placing boxes on glued box cases Technical specifications: box width max.: 310 mm box width min.: 65 mm box height max.: 170 mm box height min.: 20 mm box length max.: 400 mm box length min.: 130 mm cardboard thickness max.: 4,0 mm cardboard thickness min.: 1,5 mm SG 500 side gluer · module for raising and gluing the sides of the box case to the box Technical specifications: box case height max.: 405 mm box case height min.: 140 mm

Year of construction: 2022, condition: used, KOLBUS Box Production Line BLT 200 + BLW 200 year 2022 For the automatic production of raw boxes from cardboard blanks as well as the lamination of the boxes. The BLT 200 is used for uprighting punched and grooved cardboards and the BLW 200 is used for laminating boxes. Overview: BLT 200 box line taper BLW 200 box line wrapper Podpfx Ajz E Npmsc Ajgt Configuration: BLT 200 box line taper · copilot system with touch screen · cardboard feeder · uprighting channel · 4 heat-sealing tape stations · 2 sets of knives (4 pcs. each) · 2 sets of counter knives (4 pcs. each) · servo-controlled drive technology based on Siemens technology · delivery incl. inline coupling with box line wrapper BLW 200 Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 3 mm cardboard thickness min.: 1 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 20 mm BLW 200 box line wrapper · copilot system with touch screen · cloth feeder · hot gluing station with premelter · glue application adjustment from the outside · viscosity controls · buffer zone for feeding the boxes · cloth transport with vacuum conveyor · camera system for precise positioning of the boxes on the cloth · robot for positioning the boxes on the cloth · rub down station · 4 laminating stations for laminating boxes · 10 format plates (1.000 mm x 215 mm x 15 mm) · servo-controlled drive technology based on Siemens technology · infeed incl. inline coupling with box line taper BLT 200 · delivery via conveyor belt Technical specifications: mechanical speed: up to 40 cycles/min box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 20 mm cardboard thickness max.: 3,0 mm cardboard thickness min.: 1,5 mm cloth length max.: 815 mm cloth length min.: 120 mm cloth width max.: 605 mm cloth width min.: 120 mm

Condition: excellent (used), Year of construction: 2018, Ref:11150 . 2018 Horizon HT-30C Trimmer For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Comprising: Pgodpfx Acjz Elvvo Aot Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Including knives, tools and accessories. Specification: Book Size, Max: 300 x 300 mm Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Mechanical speed, Max: 200 cycles/hr. Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Condition: as good as new (ex-display), Year of construction: 2016, Transnorm infeed diverter diverter inclined infeed inclined outfeed 30°-2005-1930-1000 RA1863 Exhibit Make: Transnorm Year of manufacture: 2016 Discharge angle: 30° Length: 1750 mm inclined inlet and 1130 mm with total width, total length 2880 mm and a middle length of 2005 mm Pgodpfsk Abifjx Ac Aet Belt width (RB): 1000 mm Frame height: 150 mm Nominal/outer width (NB): 1150 mm Currently set height: 560 mm Conveying speed: with frequency converter freely adjustable V 380-500 kW 0.4-4 Overall height side wall: 200 mm Scope of delivery: motor with frequency converter, two supports, side guides, two light barriers and an emergency stop switch For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Pgedpfx Acey Um T Ho Aot Videos available on request.