Used Material Feed for sale (26,201)

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg Dsdpfxsi Exp Es Ap Dewb

Year of construction: 2015, condition: excellent (used), The drum follower plate system A280 has the proven Scheugenpflug double-piston pump. This pump only comes into contact with material on one side, while a flushing liquid on the rear ensures that abrasive fillers do not get caught on the seals. With this system, highly abrasive, pasty media can be conveyed continuously and reliably with an unrivaled service life. Dwjdpsif Ug Esfx Ap Dob 2 Component Follower Plate System.

Year of construction: 2026, condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 820 kg, total length: 2,560 mm, total width: 1,700 mm, total height: 1,820 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO Bunker-BC enhances material handling efficiency for quarries, recycling plants, and construction sites. Ideal as a standalone unit or an add-on to the SD Compact system, it boosts throughput by up to 50%, ensures continuous material feeding, and reduces downtime for higher productivity. Key Features: • Robust, high-performance drum bunker for long service life • Bidirectional hopper belt for flexible material flow • Quick-change hopper belt for minimal maintenance Dwodpjw Afdasfx Ap Deb • Fully electrical control with frequency converter Tech Highlights: W 1.70 m · L 2.56 m · H 1.82 m · Qmax 90 m³/h · Power 2.2 kW (400 V) · Bunker belt W 0.6 m · Filling H 2.16 - 2.66 m · Weight 820 kg

Condition: used, functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Dwedpetp Df Hjfx Ap Deb Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm • Weight: 240 kg (1C-60 l) 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min • Heating capacity: up to 80°C • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Good working condition. Please check out our other listings as well.

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages Dwodswb Hxvepfx Ap Deb - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: excellent (used), 20 pcs/stock Durkopp Adler 367 Triple Feed Sewing Machine Technical specifications : - automatic thread cutting - automatic lifting of the leg - automatic reinforcement - economic engine EFKA 220v The cars are refurbished in very good condition It is suitable for all types of thick materials: upholstery, leather, synthetic, etc Warranty & Delivery Component: complete de livery car The quality assurance of the machines is entirely conferred by our team of professional technicians. The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing th is machine, you have a 6-month warranty and a 5-year post-warranty. Delivery throughout the world! Dwsdpfx Aolgvpkop Deb

Condition: good (used), Year of construction: 2014, Ref. no.: 18636 Manufacturer: EICHHOLZ Type: OCTABIN TIPPER & MATERIAL FEEDING SYSTEM Year of construction: 2014 Further information: WHAT IS AN OCTABIN TIPPER? An octabin tipper is an industrial automation system used for the controlled and safe discharge of plastic raw materials, granules, or regrind materials from large-volume octabin containers. Heavy octabins are loaded by forklift and then lifted and tilted in a controlled manner using a hydraulic or chain-driven mechanism. The material is discharged into the lower hopper and can then be transferred to the production line via vacuum conveying or dosing systems. These systems are widely used in plastic injection molding and extrusion plants to reduce labor, increase production efficiency, and ensure safe material handling. FOR SALE: OCTABIN TIPPER + MATERIAL FEEDING SYSTEM For sale: 1 heavy-duty industrial octabin tipper / material discharge system. The system was removed from a running plastic production line and is in clean and good cosmetic condition. The machine is designed for the controlled discharge of plastic raw materials from large-volume octabins and for transferring the material into centralized conveying systems. The system is equipped with high-quality industrial components from Aerzen, Rittal, Omron, and DMN Westinghouse. BRANDED COMPONENTS INCLUDED IN THE SYSTEM Aerzen Vacuum / Blower Unit (Germany) Aerzen is one of the world’s leading German manufacturers of industrial blower and vacuum technologies. Technical Details • Brand: Aerzen • Model: GM15L • Year: 2014 • Capacity: 12.50 m³/min • Motor Power: 11 kW • Max. Pressure: 1.25 bar Djdpfx Ajy Tliwjp Dowb • Operating Pressure: 1.0 bar • Weight: approx. 626 kg Advantages • High-efficiency German technology • Suitable for continuous industrial operation • Reliable and low-maintenance • Ideal for centralized vacuum systems Rittal Industrial Control System The system is equipped with a Rittal industrial control cabinet. Rittal is a globally recognized premium brand in industrial automation and control systems. Features • Industrial control cabinet • Operator control system • Integrated safety circuits • CE-compliant construction Omron Safety Sensors The machine is equipped with Omron safety sensors. Features • Industrial safety barriers • Operator protection system • Safe working area monitoring • Compatible with automation systems DMN Westinghouse Rotary Valve System A DMN Westinghouse rotary valve is installed at the lower hopper outlet. DMN Westinghouse is a globally recognized premium manufacturer for bulk material handling systems. Technical Details • Brand: DMN Westinghouse • Model: ALD 200-6 • Low-dust controlled material transfer • Suitable for granule and bulk material applications Advantages • Controlled material flow • Reliable continuous operation • Suitable for centralized conveying systems

Condition: new, Year of construction: 2025, functionality: fully functional, Material feed unit for four-sided planer IF-100 Maximum and minimum length of workpiece: 1050 – 6100 mm Maximum and minimum width of workpiece: 50 – 247 mm Maximum and minimum thickness of workpiece: 12 – 100 mm Feed speed controlled by frequency inverter: 20–100 m/min Main motor power: 5 kW Dedpexz Ax Nsfx Ap Dewb Accelerating upper feed rollers: 2 pcs Accelerating lower feed rollers: 2 pcs Driven feed rollers: 3 pcs Feed roller dimensions: 180 × 100 mm Feed motor power with flat chain: 0.37 kW Number of flat feed chains: 5 pcs

Year of construction: 2005, condition: used, Apple engineering MM975 Mini Force Feed Depositor Dwsdjb Ucqljpfx Ap Dob Stainless mobile height adjustable single head pneumatic depositor with variable speed scroll feeder in hopper for positive product feeding

Year of construction: 2006, condition: used, Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 210 x 240 x 210 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Transport dimensions: 2100mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dwsdpfx Apewh I Edj Deb Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2000, Colour: Grey Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller is no longer available Dwjdswnhabepfx Ap Dob - Year: 2000 - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 120 - Heating boiler present: Yes - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1984, functionality: unexamined, Citizen Cincom F20 sliding head CNC lathe Dwsdpfxezmadte Ap Dob Year (1984) with Citizen Cincom control and bar feed 2 available

Condition: used, Year of construction: 1984, functionality: unexamined, Citizen Cincom F25 sliding head CNC lathe Year (1984) Dedpfxezmad Hs Ap Dswb with Citizen Cincom control LNS Hydrobar Mini-Sprint bar feed

Year of construction: 1998, condition: good (used), Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology Dedpfx Apex Td Ile Djwb -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... -Type:PMA-U -Drive: 0.75 kW -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg

Condition: excellent (used), fuel type: diesel, color: yellow, Year of construction: 2022, operating hours: 295 h, Year of manufacture: 2022 Application: Construction Drive: Wheeled Unladen weight: 38,500 kg CE marking: Yes Technical condition: Very good Visual condition: Very good Price: On request NEW/DEMO CATERPILLAR MH3040 MATERIAL HANDLER Dwodpfxouxr Ngo Ap Djb YEAR OF MANUFACTURE 2022 ONLY 295 DEMO HOURS!!! MAXIMUM REACH 15,490 MM BOOM MH 9.3 M (30'6") STICK 7.1 M (23'3") MAX HEIGHT 17,510 mm MAX STACKING HEIGHT 5,445 mm MAX DEPTH 5,265 mm JIB ROD HEIGHT 12,195 mm 4X OUTRIGGERS HEAVY-DUTY AXLES HYDROSTATIC TRANSMISSION CAT C7.1 ENGINE TIRES 16.00-25 HYDRAULIC ELEVATING CABIN CABIN GUARD AUTOMATIC AIR CONDITIONING LCD MONITOR WITH TOUCHSCREEN HARDENED P5A WINDSHIELD CAMERA CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: used, Older, fully functional stone grinding mill / feed mill. Power supply: 380 VOLT Motor power: 11 kW Net weight of the mill: approx. 500 kg Dodpfx Apsxb Nxcs Dewb Inspection and loading of the mill are possible by prior appointment! Shipping via freight forwarder is also possible! A video of the mill can be sent to a phone number with WhatsApp upon request!

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FA005TN.A50.002 Article No. Base Machine: 1004473 Z005 TN AllroundLine Table-Top The system is a comprehensively equipped ZwickRoell Z005 TN AllroundLine tabletop testing machine. The system has been specifically configured for mechanical and functional testing of automotive injectors and injection systems. In addition, the system features pneumatic sample holders, a visual color recognition system, and a precision scale, as well as extensive product-specific accessories. Technical data: Testing machine: Maximum testing force of the load frame: 5 kN Total testing space height: 1,164 mm Testing space height at the bottom without attachments: 1,030 mm Testing space height at the top without attachments: 1,015 mm Testing space width: 440 mm Crosshead speed: 0.0005 to 3,000 mm/min Return speed: max. 3,000 mm/min Deviation of the drive speed: max. 0.05 % Drive stroke resolution: 0.959431 nm Positioning repeatability: ±2 µm Control: adaptive Control cycle: 1,000 Hz Load cell: Type: Xforce HP Rated force: 0.5 kN / 500 N Suitable for static and dynamic tensile and compressive forces Accuracy class 1 from 1 N Accuracy class 0.5 from 5 N Maximum operating force: 150 % of the rated force Limit force: 150 % of the rated force Breaking force: 300 % of the rated force Protection class: IP54 Connection thread: M28 × 1.5 Connection pin: Ø 20 mm Measuring and control electronics: ZwickRoell testControl II machine electronics DCSC measuring module for strain gauge load cells Measured value acquisition rate: 400 kHz Measured value transmission to PC: 500 Hz Automatic zero point correction Measured signal time correction Ethernet interface to PC Measuring amplifier for strain gauge full bridges Measuring range: 0.2 to 165 % of the rated measured value Measured value acquisition rate of the DCSC module: max. 10 kHz Force measurement technology according to ISO 7500-1 and ASTM E4 Testing device for automotive injectors: Article No.: 3002956 Maximum testing force: 200 N Dimensions: approx. 396 × 235 × 309 mm Weight: approx. 20 kg Pneumatic sample holders: Article No.: 3001461 Maximum testing force: 200 N Maximum opening width: 40 mm Closes on both sides and symmetrically Interchangeable clamping jaws Dimensions of the load frame: Height without base profiles: 1,314 mm Height with base profiles: 1,528 to 2,108 mm Width without base profiles: 680 mm Width with base profiles: 856 mm Width including machine electronics: 1,044 mm Depth with base profiles: 650 mm Depth including machine electronics: 690 mm Weight: Load frame with machine electronics: approx. 161 kg Base profiles: approx. 31 kg Machine with typical attachments: approx. 226 kg + Laser measuring system / visual color recognition system from Keyence + Precision scale: Article No.: 085770 Maximum load: 220 g Readability: 0.1 mg Repeatability at 200 g: 0.1 mg Linearity: 0.25 mg RS232 interface for data transmission Separate weighing cell, display unit and operating terminal + PC with ZwickRoell testXpert III testing software, version 1.2 + Microphone and many other accessories shown in the pictures Condition: used Optical condition according to the pictures Functional scope according to the pictures Dwsdezwvu Nepfx Ap Dob The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Shipping or freight shipping is possible. Subject to changes, errors and prior sale.

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Djdezwvtxjpfx Ap Dewb Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: used, Second-hand KUPER RFG roller shutter guide milling machine for milling the roller shutter guide slots into the roller shutter guide strips / roller shutter guides / roller shutter guide rails, fitted with a Scheer HM 16 hand-held router. Technical data: Dwjdszza A Sspfx Ap Dob - Speed: 18,000 rpm - Power: 2,000 W

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Ladder rack pockets - Rear light bracket - Insert pockets Net price: €13,025.21 / Gross price: €15,500.00 Article number: ULM235482035.13 Technical data: • Brand: Unsinn • Model: ULM 4820-35-14 • Vehicle type: Long material trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 966 x 204 x 35 cm • External dimensions (L x W x H): 667 x 210 x 113 cm • Loading height of the floor: 78 cm • Permissible total weight: 3,500 kg • Tare weight: 1,055 kg • Payload: 2,445 kg • Chassis: High loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics • Hollow profile construction welded and completely hot-dip galvanized • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Steel corner posts, removable • Stable drawbar extension, can be extended without tools, free drawbar length approx. 3100 mm • Extendable rear light bracket 2000 mm, flush with the top edge of the loading area • Max. loadable with 200 kg of long materials at body length • Max. trailer overall length 12000 mm to be observed • 4x ladder rack pockets 100 x 100 mm embedded in the floor • 4x insert pockets L = 300 cm, 90 x 90 mm • Maintenance-free rubber spring axles • Option to insert at all 4 corners for tarpaulin frames, grille attachments, side panel attachments or front wall extension • Stable long lever locks, recessed • Made of multi-layer glued screen printing plate, 18 mm, continuous without joints, non-slip and waterproof • 8 foldable lashing eyes, mounted recessed in the floor frame profile (600 DaN/kg) • 8 lashing eyes under the loading area • Maintenance-free rubber spring axle from ALKO • Axle with continuous axle body and individual wheel suspension • Reversing automatic • ALKO inertia coupling and parking brake • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Lighting recessed in the rear frame • Integrated rear fog light • 13-pole plug • Reinforced support wheel, for safe parking of the loaded trailer Dedszy Dtlepfx Ap Dowb _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, machine/vehicle number: 85163, Attachment: Electro-hydraulic piston diaphragm pump (feed pump / filling pump) NEW! Type: Abel HMD-G-50-500 Identification No.: 85163 Flow rate: 50 m3/h Motor power: 30 kW Motor speed: 1465 rpm Piston diameter: 200 mm Suction side connection flange: DN 125 PN 16 DIN 2633 Pressure side connection flange: DN 100 PN 40 DIN 2635 Application: Filter press feeding Suction flow stabilizer: including vacuum breaker 0.5 bar Air feed valve: on the suction and pressure sides, including pressure reducer, solenoid valve, check and throttling valves Other accessories: such as drain valve, pressure gauge, etc. Photo: similar design The Abel hydraulic diaphragm simplex piston pump in horizontal design is double-acting, slow-running, self-priming, and dry-run safe. The pump's flow rate is energy-efficiently controlled by a speed-controlled drive, depending on the delivery pressure, using a frequency converter. We also offer our piston diaphragm high-pressure pumps in a special design for tunnel construction. Dwjdped Ey Rgefx Ap Dsb Do you have special requirements? Please ask us.

Condition: new, machine/vehicle number: 85163, Attachment: Electro-hydraulic piston diaphragm pump (feed pump / filling pump) NEW! Type: Abel HMD-G-50-500 Identification No.: 85163 Flow rate: 50 m3/h Motor power: 30 kW Motor speed: 1465 rpm Piston diameter: 200 mm Suction side connection flange: DN 125 PN 16 DIN 2633 Pressure side connection flange: DN 100 PN 40 DIN 2635 Application: Filter press feeding Suction flow stabilizer: including vacuum breaker 0.5 bar Air feeding valve: on the suction and pressure sides, including pressure regulator, solenoid valve, check and throttle valves Other accessories: such as drain valve, pressure gauge, etc. Photo: similar design The Abel hydraulic diaphragm simplex piston pump in horizontal design is double-acting, slow-running, self-priming and dry-running safe. The pump's flow rate is energy-efficiently controlled by a variable speed drive, depending on the delivery pressure, using a frequency inverter. We also offer our piston diaphragm high-pressure pumps in a special version for tunnel construction. Dsdpfx Aod Ey I Iop Dswb Do you have special requirements? Please contact us.

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 5100443-2 , Product: Piston membrane pump, feed pump, used Dedpfx Aed Ey Sasp Dewb Type: Abel HMD-G-32-0250 Construction year: 2009 Power: max. 25 m³/h Pressure: 15 bar Machine number: 5100443-2 Length: 3300 mm Version: Acid resistant, FU controlled

Condition: new, machine/vehicle number: 85163, Attachment: Electro-hydraulic piston diaphragm pump (charging pump / filling pump) NEW! Type: Abel HMD-G-50-500 Identification No.: 85163 Flow rate: 50 m3/h Motor power: 30 kW Motor speed: 1465 rpm Piston diameter: 200 mm Suction-side connection flange: DN 125 PN 16 DIN 2633 Pressure-side connection flange: DN 100 PN 40 DIN 2635 Application: Filter press feeding Suction flow stabilizer: including vacuum breaker 0.5 bar Air feed fitting: on the suction and pressure sides, incl. pressure regulator, solenoid valve, check and throttle valves Other accessories: such as drain valve, pressure gauge, etc. Photo: similar in design Dwodpfx Asd Ey Risp Dob The Abel hydraulic diaphragm simplex piston pump in horizontal design is double-acting, slow-running, self-priming and dry-run safe. The pump's flow rate is efficiently controlled by a speed-controlled drive, depending on the delivery pressure, by means of a frequency inverter. We also offer our piston diaphragm high-pressure pumps in a special tunnel construction version. Do you have specific requirements? Please contact us.

Year of construction: 2009, condition: ready for operation (used), Used piston membrane pump, feeding pump Abel HMD-G-32-0250 Yer of construction: 2009 Capacity: max. 25 m³/h Djdpfxsd Hf I Rs Ap Dowb Pressure: 15 bar Machine-number: 5100443-1 length: 3300 mm