Used Turn Band for sale (12,287)

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 2230832-269, Barbaric RTS 02 Professional reverse transfer system with destacking, year of manufacture 2023. Workpiece recirculation with 0 - 90 - 180 degree rotation, part measurement, destacking function including stack construction and manual mode for oversized panels. Composed of a removal station RX U4 B2200, conveyor belt L9000 B800, delivery station Comfort, movable table, dual function, steplessly adjustable conveyor belt, support rollers with double track, portal RTS 6100, safety fences and 2 safety light curtains. Largest part 2800 x 1300 mm, smallest 300 x 80 mm, maximum 60 kg. Pick-up with suction cups, up to 12 cycles per minute, transfer speed up to 120 m/min, stacking height 800 mm. Connection 400 V / 50 Hz, 20 A and compressed air 0.6 MPa. Fpsdpfxoz Ngg Ej Aikep

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges Fjdpfszcpixjx Aikepp 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Fpedswlbxljpfx Aikep Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: used, Year of construction: 2009, For sale: Band-All BA32-102 Banding Tool Fjdpfov Sq Hysx Aikopp The Band-All BA32-102 is a high-quality, durable banding tool designed for heavy-duty applications. It efficiently secures bundles with precision, offering ease of use and long-lasting performance. Perfect for industrial and commercial use, this tool ensures a tight and secure band every time. In excellent condition and ready for immediate use. Contact for more details or to arrange a viewing! More photos and full specifications: / For sale: Band-All BA32-102 Banding Tool

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: CE marking, OTT TWISTER Edge Banding Machine This is a single-sided edge banding machine, operated from the right side, designed for applying and processing edges made of veneer, plastic, and solid wood. Year of manufacture: 2014 1. Technical specifications and dimensions: • Banding thickness: 0.4 – 10 mm. • Part width: minimum 70 mm. • Part height: 8 mm to 60 mm. • Part length: minimum 150 mm. • Continuous speed: 18 m/min. • Working height: 880 mm. • Machine dimensions: height 1,600 mm, width 1,100 mm, length 7,200 mm. • Weight: 3,250 kg. • Operating voltage: 400 Volt, 50 Hz. 2. Key working units: • Pre-milling unit: equipped with 2 motors (2.2 kW, 12,000 rpm) for milling the front surface. • Glue application (Vario-Melt): application roller with dosing automation and modular Combi Melt system for EVA and PUR adhesives. • K13 trimming unit: 2 motors (0.2 kW) for precise edge trimming with a tilting option of 0/5°. • Rough and fine milling unit: for processing edge overhang and radius milling. • AKF copying milling cutter: automated unit for longitudinal and corner processing with a function for veneer and postforming. • Scraping units: includes a radius scraper ZKc (for PVC edges) and a surface scraper ZKf (for removing excess glue). Accessories • PUR package: includes a quick-change head and a hopper. OTT TRANSLIFT Transport System Fjdpfx Aiozr Nkgskjpp This system is used for automatic handling of parts and returning them to the operator. • Manipulator: single-column, with suction, maximum load capacity 60 kg. • Movements: rotation 0°/90° and transfer to the return belt. • Return conveyor belt: width 900 mm, length corresponds to the machine. • Part limits: maximum length 3,000 mm, maximum width 1,300 mm.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Fodpeyzxa Esfx Aikspp Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: excellent (used), Year of construction: 2018, Horizontal conveyor Wittmann 2500x400 mm year 2018 price: €2,850.00 contact: Mr. Rainer Eckerle Fpodpfxs Ai Exdj Aiksp

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system Fpjdpfx Asw Nad Hoiksp 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Fpsdpfx Aezt Twteikjp Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel Fpodpfeyu If Nex Aiksp

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Fedpfx Aioyh Hc Rskepp

Condition: good (used), Year of construction: 2021, Ref. -No.: 10630 Manufacturer: MATEC Type: HV 700 Year of construction: 2021 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany X-Travel: 2600 mm Y-Travel: 700 mm Z-Travel: 950 (horizontal) / 900 (vertikal) mm Swivel range: ± 105 ° Table speed range: max. 700 min/-1 Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 50 Turning Speeds: 20 - 15.000 RPM Max. Torque: 195 (40 % ED) / 150 (100 % ED) Nm axes: 5 + Spindel Drive Capacity - Spindle Motor: 41 (40 % ED) / 31 (100 % ED) kW Operating hours: Steuerung ein 19.381 / Maschine ein 7.220 / Programmlauf 2.285 H Internal cooling: 20 / 40 bar Holding torque: 5.000 Nm NC rotary table: 2.000 kg Tabletop C-axis: NC-Rundtisch Ø 750 mm, im Maschinentisch eingelassen Further information: - NC swivel head, infinitely variable ± 105°, torque drive, swivel radius 250 mm - Motor spindle HSK-A63, 20 - 15,000 rpm, 41 kW (40 % duty cycle) / 31 kW (100 % duty cycle) - NC rotary table Ø 750 mm recessed into the machine table (torque drive, max. 700 rpm, indexing accuracy ± 2.5", max. load 2,000 kg) - Direct measuring system X, Y, Z axes (absolute) Fpodpfx Aj Ahmvmeiksp - 50 tool pockets - Internal coolant supply 20 bar and 40 bar with paper band filter (450 l) - Hydraulic motor spindle clamping for turning operations - Partition wall for pendulum (dual-station) machining - Automatic safety doors - 3D touch probe with radio transmission - Renishaw RTS tool setting probe with radio transmission (2 pcs) - Software option KinematicsOpt incl. calibration ball with holder - Dynamics package for free-form surfaces - Collision monitoring SETAC-ADVANCED - Electronic handwheel (portable) - Full work area enclosure with roof - Bellows with steel slats - Chip conveyor, special version for high-volume machining - Mechanical air filter CMC 1500 (2 pcs) - Cooling unit for electrical control cabinet - Flushing gun - Central oil lubrication - LED work area lighting - Installation elements The machine can be viewed under power by arrangement.

Condition: used, cutting diameter 470 mm saw band length 6.060 mm capacity 90 degrees: square 610 x 410 mm capacity 45 degrees: round 475 mm capacity 45 degrees: square 490 x 415 mm capacity 60 degrees: round 330 mm capacity 60 degrees: square 320 x 410 mm diameter min. 10.0 mm turning speed range: 20 - 100 m/min dimensions of saw-band 6060 x 34 x 1.1 mm height of material-table 810 mm total power requirement 5.5 kW weight 2080 kg range L-W-H 3280 x 1760 x 2010 mm Current new price ~ 55.000 euros Special price upon request Features: - Robust semi-automatic electro-hydraulic band saw - Miter cuts from -60° (left) to +60° (right) - Designed for industrial use - Ideally suited for cutting solid material - Extremely stable and robust construction - Cast-iron pulleys with a diameter of 500 mm - Equipped as standard with infinitely variable band speed adjustment - Microswitches control the highest and lowest positions of the saw arm - Includes a driven cleaning brush for optimal cleaning . and maintenance of the saw blade - Fully hydraulic system controls the machine's operating sequences - Cooling system provided at the saw blade guides - Blade guides equipped with adjustable carbide inserts - Machine drive features a low-maintenance, oil-lubricated worm gear - Powered by a robust three-phase motor - Motor equipped with overload protection - Machine frame consists of a highly solid steel construction - Features a solid, precise dual-column guide system - Linear guides on both columns ensure perfect cutting results - Includes cutting height limitation Fodpfxe Ah Idpe Aikspp - Vise clamping jaw equipped with a long-stroke cylinder - Operating manual in German (PDF)

Year of construction: 2016, condition: excellent (used), This system was used to sort and convey small brushes. It is in very good condition and has seen little use. There are two such systems available. Fpodpfxehit Rwo Aikop

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 1.603.012, functionality: fully functional, cutting range round steel at 45°: 360 mm, cutting range round steel at 90°: 360 mm, saw band length: 5,200 mm, saw band width: 34 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Circular sawing capacity at 90°: 360 mm Circular sawing capacity at 45°: 360 mm Saw band length: 5,200 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Saw type: Semi-automatic Orientation: Horizontal Miter saw: Yes Workpiece clamping: Hydraulic MACHINE DETAILS Power: 3.7 kW Fedpfx Ae Aidvceikepp Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,300 x 1,800 mm Unladen weight: 1,585 kg Transport packages: 1 piece EQUIPMENT Digital display Chip collection tray Documentation CE marking

Condition: used, Year of construction: 2005, functionality: fully functional, KIATURN 15N SLANT BED CNC LATHE 170 MM HYD 3 JAW CHUCK Fpodpfxoz Rnwbo Aiksp MAX TURNING DIA 250 MM BAR CAPACITY 38.1 12 STATION TURRET TAILSTOCK FANUC CONTROL TOOL SETTER PARTS CATCHER BARFEED

Condition: excellent (used), Mazak Integrex i-200 5-Axis CNC Mill Turn Centre Fsdpfx Ais Aidxiekepp Year: 2017 Mazatrol Smooth CNC Control Full 5-Axis Simultaneous Machining B-Axis Milling Head C-Axis Main Spindle Kitagawa BB08 Hydraulic Chuck SMW Autoblok (SMW) Hydraulic Power Steady Maximum Machining Diameter: 658 mm Maximum Turning Length: 1,519 mm High-Speed Milling Spindle Automatic Tool Changer Renishaw Inspection Probe Renishaw Tool Setter Swarf Conveyor FSE High-Pressure Coolant Filtration System A-Mist Oil Mist Extraction Unit Fully Enclosed Guarding Automatic Lubrication Coolant System

Condition: used, Year of construction: 2016, Due in at the end of November and there photos are taken on site... more photo available on arrival in our showrooms Superb 2016 MAZAK Quick Turn Nexus-2 250-II MS with driven tools, 2 x C Axis, Sub Spindle, tool setter, parts catcher, servo barfeed and suite of tooling. - Maximum Swing: 695 mm (27.36 in) - Maximum Machining Diameter: 380 mm (14.96 in) Fpsdpfx Ae Ah Iimeikop - Maximum Bar Work Capacity: 80 mm (3.15 in) – Note: standard setup typically supports up to 3.0 in bars - Maximum Machining Length: ~540 mm Supplied with Main Spindle, Second (Sub) Spindle, Rotary/Milling Turret, 10" Chuck on main, 6" chuck on sub, Main spindle Maximum Speed 4,000 RPM, 6,000 RPM on Sub Motor Power Mian, 35 HP (26 kW) Sub 10 HP (7.5 kW) & Driven tool motor 7.5 HP (5.5 kW) - Turret Stations: 12-position drum turret where rotary tools can be mounted at any station. - Axis Travel: X-Axis: 234 mm (9.21 in) - Z-Axis: 625 mm (24.61 in) - W-Axis (Sub-Spindle Travel): 585 mm (23.03 in)

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 176535, turning diameter over cross slide: 675 mm, turning length: 575 mm, turning diameter: 350 mm, spindle bore: 77 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 30 m/min, overall weight: 4,700 kg, MAZAK QUICK TURN NEXUS 250 – 2005 - Manufacturer: MAZAK - Model: QUICK TURN NEXUS 250 - Year: 2005 (June) - CNC Control: MAZATROL 640T NEXUS - Serial Number: 176535 Technical Specifications - Swing Over Bed: 675 mm - Max. Turning Diameter: 350 mm - Max. Turning Length: 504 mm - Distance Between Centers: 559 mm - Max. Bar Capacity: 77 mm - X-Axis Travel: 230 mm - Z-Axis Travel: 575 mm - Rapid Traverse X/Z: 30,000 mm/min - Spindle Speed: 35–4,000 rpm - Spindle Motor Power: 26.1 kW (35 HP) - Spindle Nose: A2-8 - Spindle Bore: 80 mm - Chuck Size: 254 mm (10") - Turret Capacity: 12 Stations - Tailstock Taper: MT5 - Machine Weight: Approx. 4,717 kg Equipment & Options - KITAGAWA B-210 Hydraulic 3-Jaw Chuck Fpjdpj Ait Auofx Aikep - 12-Position Drum Turret - Parts Catcher - Automatic Tool Setter (Tool Eye) - Programmable NC Tailstock - JORGENSEN Chip Conveyor Electrical - 208 V / 3 Phase / 50–60 Hz - 40 kVA Free Loading at customer's truck

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: E 3907, turning length: 200 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,300 kg, type of input current: three-phase, controller model: Mitsubishi Meldas, counter spindle speed (max.): 8,000 rpm, Long-turning lathe with FMB bar feeder! Fsde Ah Du Hspfx Aikepp TECHNICAL DETAILS Turning diameter over bed: 20 mm Spindle bore: 24 mm Turning length: 200 mm Spindle speed: 20–10,000 rpm C-axis resolution: 0.001° Counter spindle / pick-off station Pick-off diameter: 20 mm Turning length: 80/600 mm Spindle speed: 200–8,000 rpm C-axis resolution: 0.001° Rapid traverse rates X/Y/Z: 32 m/min MACHINE DETAILS Control system: Mitsubishi Meldas Collet size: F25 (145E) Guide bushing: Neukomm T223 (22.001) Swivel angle of the tool block: 90° Driven tool positions: 3 Number of axes: 5 + 2 C-axes Total power requirement: 2.2/3.7 kW Dimensions & Weight Footprint: approx. 2.4 × 1.1 × 1.8 m plus loading magazine Machine weight: approx. 2.3 t EQUIPMENT CNC control system FMB 3-26 loading magazine Swiveling tool block with driven tools for radial and tangential machining Guide bushing by Neukomm Documentation On-board tools

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: M134377I2WA, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 30 kg, total height: 3,300 mm, total length: 2,200 mm, total width: 3,400 mm, overall weight: 9,600 kg, Equipment: documentation/manual, rotational speed infinitely variable, Fully automated Hwacheon Hi-TECH CNC lathe with WEKAL portal system including robot Base: Hwacheon Hi-TECH 450BL YSMC (Siemens) Year of manufacture 2024 | Like new | Manufacturer's warranty until 03/26/2027 - transfer possible after coordination with the manufacturer | Immediately available Highlights ✓ Year of manufacture 2024 ✓ Automatic door drive ✓ Like new condition ✓ Robot interface ✓ Fully functional ✓ Stroke monitoring ✓ High-pressure coolant system ✓ Siemens SINUMERIK with ShopTurn ✓ Oil/emulsion mist filter ✓ DXF reader integrated ✓ Fully automatic WEKAL portal system ✓ Y-axis ±60 mm ✓ WEKAL WRB roller conveyor ✓ Counter spindle 4,000 rpm ✓ Robot gripper module ✓ Driven tools up to 5,000 rpm ✓ Complete documentation ✓ Torque upgrade ✓ Ongoing maintenance with records ✓ Completely automated manufacturing cell The system is designed for the automated machining of round material. Workpiece range: • Diameter 50–300 mm • Workpiece weight up to 30 kg The WEKAL automation system handles the loading and unloading of workpieces and enables economical, low-manned operation. WEKAL WPA portal system • 2-axis portal system • X-beam 7,000 mm • X-travel approx. 5,500 mm • Z-travel approx. 1,800 mm • WRB roller conveyor conveying length 10,000 mm • 20 workpiece carriers • Robot gripper module with quick-change system Machine equipment • Siemens ShopTurn • ProfiNet • Touchscreen • DXF reader • Network drive management • Geared spindle 22/18.5 kW • 2,500 rpm • Y-axis ±60 mm • Counter spindle • Driven tools 5,000 rpm • Torque upgrade • High-pressure cooling • Oil mist extraction • Chuck flushing • Chuck blow-out • Stroke monitoring • Automatic door drive • Robot interface Fpjdpfxjzhltco Aiksp Documentation and condition The system is in like-new and fully functional condition. • complete documentation available • ongoing maintenance including records • manufacturer's warranty until 03/26/2027, transferable after coordination with the manufacturer • short-term availability The system can be inspected while powered on. Extensive accessories available (chuck jaws, gripper jaws, tool holders, driven tools, etc.) Training and instruction possible. Programming and setup of your components possible. Sale ex works. Buyer organizes disassembly, loading and transport.

Condition: excellent (used), FULL (4-SIDES) FLEXIBLE LINE of Sizing-Milling & Edge Banding, with completely full automatic handling and PC53 Line Control. With HIGH-PERFORMANCE PACKET (feeding speed up to 60 m/min) Composed of the following machines: 206026A) Loader (double station) "BARGSTEDT (HOMAG)" Mod. TBH 501/D/25/12 Fodpfxjzwlabe Aikopp 206026B) 1st Single-side (Left) Sizing & Edge Banding machine "HOMAG" Mod. KFL 612/16/A3 206026C) 2nd Single-side (Right) Sizing & Edge Banding machine "HOMAG" Mod. KFR 612/18/A3 206026D) Conveyor (motorized rollers) "HOMAG" Mod. TRL 100/35/12 206026E) Curved transfer (90°) with a 90° motorised carpet "HOMAG" Mod. TRL 100/35/12 206026F) High-performance 90° angle transfer "HOMAG" Mod. TWR 320/30/12 206026G) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 526/9/A3/30 206026H) Turning Station "HOMAG" Mod. TDR 510/30/12 (with WANDRES cleaning unit) 206026I) Stacker (double station) "BARGSTEDT (HOMAG)" Mod. TSH 501/D/25/12

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Fpedpfx Aeu Ibihsikep Parts shown by hand not come.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10713 Manufacturer: MAZAK Type: Quick Turn 8N Year of construction: 1999 Fpodpfx Ais Ai I Edjksp Type of control: CNC Control: Mazatrol T32-2 Storage location: Halberstadt Country of origin: Japan Turning Length: 250 mm Power Capacity: 7,5 kW Weight Of The Machine Ca.: 2,7 t Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement

Condition: excellent (used), Nakamura-Tome Super NTJ 9-Axis Turn/Mill Centre Year: 2003/2004 Serial Number: B150509 Fpode Aaz Nzjpfx Aikep Control: Fanuc 18i-TB Main Spindle Maximum bar capacity: 65 mm Maximum turning diameter: 190 mm Spindle nose: A2-6 Spindle power: 15 kW Spindle speed: 4,500 rpm C-axis indexing: 0.001° Sub-Spindle Maximum bar capacity: 51 mm Spindle nose: A2-5 Spindle power: 11 kW Spindle speed: 5,000 rpm C-axis indexing: 0.001° Stroke: 760 mm Upper Turret Number of tool stations: 24 Motorised tool stations: 24 X-axis travel: 345 mm Y-axis travel: ±45 mm Z-axis travel: 1,240 mm B-axis travel: ±91° Live tooling speed: 6,000 rpm Live tooling power: 5.5 kW Lower Turret Number of tool stations: 24 Motorised tool stations: 12 X-axis travel: 167.5 mm Z-axis travel: 685 mm Live tooling speed: 6,000 rpm Live tooling power: 5.5 kW