Used Vertical turning lathes for sale (194)

Condition: excellent (used), Year of construction: 2008, Two Emag vertical lathes. Built in 2008 and 2004 Fanuc control system Lifetool available for driven tools Colsv Sk Hgoq Rg Shogt Automation interface Additional inputs and outputs / M-functions Shuttle operation Machine was never operated wet (always dry)

Condition: good (used), Year of construction: 2006, machine/vehicle number: 66078, TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Speed: 5,500 rpm Swing diameter: 260 mm X-axis travel: 626 mm Z-axis travel: 250 mm Spindle bearing diameter: 32 mm Nominal speed: 1,200 rpm X-axis rapid traverse speed: 60 m/min Z-axis rapid traverse speed: 30 m/min Turret positions: 12 MACHINE DETAILS Machine length: 1,685 mm Machine width: 2,400 mm Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper DIN 55026: A6 - WPS pallet conveyor - KNOLL system (2010) - SAUTER turret (12 places) - Documentation available Cgolq Rswfdddeg Shst

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V Cgslq Rgev Rrq Do Shet frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5x3,8x4 m

Condition: used, Year of construction: 2012, turning diameter 400 mm swing diameter 420 mm x-travel 850 mm z-travel 315 mm spindle head DIN 55026 - Size 11 spindle bearing diameter 140 mm turning speeds max. 4000 U/min tool turret 12 times C5 Capto rapid traverse x + z axis 45 / 30 m/min feeding force 11 kN Celsvxwx Aeq Rg Shegt total power requirement 58 kW weight of the machine ca. 9 t dimensions of the machine ca. 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available

Condition: new, The VDM series of vertical lathes offers modern, conventional solutions for machining large workpiece diameters and heavy workpiece weights. Their design enables particularly easy and safe loading and unloading. The feed drive is a high-torque servo motor and a powerful hydraulic system clamps the crossbeam. The main drive provides high torque for heavy machining and a side support is available for machining the outer contour. The standard mounted 3-axis position indicator ensures precision. Cjlsu E Nn Hsq Rg Shegt

Condition: ready for operation (used), Year of construction: 1996, General Data Measurements width 1450mm Measurements depth 2500mm Measurements height 1700mm Machine weight 4000kg Cgelqsv D Ryqe Rg Shst Control Unit Brand FANUC Model GE Fanuc Series O-T Main Drive Spindle speed range 4500rpm Spindle motor power 25Kw / 34HP Additional Equipment Number of tools: 12pcs This CMZ TB1 480 A was manufactured in 1996. A robust vertical turning machine, it's ideal for precision tasks. If you are looking to get high quality turning capabilities consider the CMZ TB1 480 A machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2013, Condition: excellent (used), A pair of You Ji YV250 Vertical Borers Max Swing Dia - 500mm Max Turning Dia - 350mm Max Turning Height - 250mm Spindle speed 50-2500rpm Spindle bearing diameter 100mm Spindle Nose A2-8 Turret Type - 6 Station Number of Tools - 6 X axis travel -50,+300 Z axis travel 450mm X axis rapid traverse 12m/min Z axis rapid traverse 24m/min Spindle motor P22 11/15 kw X axis servo motor 1.6kw Z axis servo motor 3kw Hydraulic motor 2.2kw Coolant motor 0.5+1kw 10" / 250mm 3 Jaw Auto strong close centre Chuck Boring bar brush Drilling sleeve MT2 and MT3 Cgolq Rjlz S Ntjg Shet Chip conveyor and coolant tank Fanuc Series Oi-TD control Dimensions - L 2920mm W 1480mm H 2460mm Weight 4500kg Power capacity 30kva

Condition: used, Year of construction: 2011, x-travel 745 mm z-travel 300 mm control Sinumerik 840 D turning speeds 6.000 U/min tool taper VDI 40 number of tool places 12 Pos. workpiece diameter 250 mm In our opinion, the machine is in good used condition and can be viewed under power by appointment. Technical features & accessories: - lateral workpiece feed and discharge - chip conveyor KSS - cooling system KSS Type SV0.3 + KBF600 Year of manufacture 2021 - feeding system There are another 3 identical machines from 2007 available. Cjlq Rjvw D Afjg Shegt Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Year of construction: 2017, operating hours: 9,400 h, machine/vehicle number: 7584, 2000mm Table CNC S type Elevating Crosslide Webster Bennett (Original CNC). Modified 2 to suit users capacity. Original ATC removed to increase turning capacity. Extended Height workpiece ht. 1600. with Z axis travel. 1350mm ram tooling adapted to accept Capto no.6 tooling. Spindle speed infinitely programmable max 182rpm. Fully remanufactured 2017. Retrofitted with a Fagor 8055 cnc with operator input conversational programming, operator remote for setting. Cgelq Rg Sjvztfkohot New electrical retrofit with Fagor axis servos and motors. Fully enclosed interlocked guard system, swarf deflectors to removable bins, Full software and documentation available.

Condition: used, Year of construction: 2009, turning diameter 320 mm turning height 180 mm Control SIEMENS 840 D Cgjlq Rg Sovxwk Sehot chucking diameter 315 mm 0 4 U/min 1 mm rapid power traverse in X-and Z direction 60/30 m/min tool turret with 12 work positions VDI 50 total power requirement 65 kW weight of the machine ca. 13,5 t dimensions of the machine ca. 5,5 x 3,2 x 3,3 m

Condition: new, The VDM series of vertical lathes offers modern, conventional solutions for machining large workpiece diameters and heavy workpiece weights. Their design enables particularly easy and safe loading and unloading. The feed drive is a high-torque servo motor and a powerful hydraulic system clamps the crossbeam. The main drive provides high torque for heavy machining and a side support is available for machining the outer contour. The standard mounted 3-axis position indicator ensures precision. Colqeu E Nlfo Rg Shegt

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand SIEMENS Model Sinumerik 810 D Main Drive Spindle speed range 4000 Spindle motor power 1.2-12 kW Number of axis 2 Movement X-Axis Movement 850 mm X-Axis Feed Force 2500 N X-Axis Rapid Traverse 3000 mm/min Z-Axis Movement 550 mm Z-Axis Feed Force 2500 N Z-Axis Rapid Traverse 3000 mm/min This IRLE Facing Lathe was manufactured in 1998. Ideal for vertical turning applications, this machine offers robust construction and reliable performance. Consider the opportunity to buy this IRLE Facing Lathe vertical turning machine. Contact us for more information. Application Types Colq Rg Sev S Nb Aohjgt Turning

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 103342, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, spindle speed (max.): 3,400 rpm, turning diameter: 340 mm, TECHNICAL DETAILS Turning diameter: 340 mm Swing diameter: 420 mm Turning height: 315 mm X-travel: 850 mm Z-travel: 315 mm Control: Siemens 840 DSL Spindle Spindle speeds (infinitely variable): 0 - 3,400 rpm Main motor power: 37 (48) kW Feed Feed range in X-direction: 0 - 45 m/min Feed range in Z-direction: 0 - 30 m/min Tool Tool system: 12-station turret head Tool drive power: 19 kW Tool speeds: 0 - 6,000 rpm MACHINE DETAILS Cgolq Rgov T U T Ho Shet Total power requirement: 60 kW Machine weight: approx. 12 t Space requirement: approx. 3.7 x 3.1 x 3.3 m EQUIPMENT - CNC vertical lathe - Automatic workpiece feed

Condition: used, Year of construction: 2014, Control Siemens 840DSL max. swing diameter 420 mm max. turning height 300 mm main spindle: max. turning speeds 3400 min/-1 drive capacity - main spindle 45 / 35 kW max. torque 775 / 600 Nm chucking diameter 315 / 400 mm tool turret: number of tool places 12 Pos. Shank diameter 40 mm travel: x-axis 850 mm z-axis 315 mm feeds: rapid traverse (x/z) 45 / 30 m/min weight of the machine ca. 10,0 t dimensions of the machine ca. 4,2 x 1,5 x 3,5 m In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - driven tools - c-axis - Capacity for pieces diameter 30 to 160 mm : 32 [pos] - Capacity for pieces diameter 120 to 220 mm : 24 [pos] - Capacity for pieces diameter 120 to 340 mm : 16 [pos] The scope of delivery of the machine does not include a clamping device. Accessories, tools and clamping devices shown are only part of the scope of Colq Revki Rnog Shegt delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Year of construction: 2021, Vertical Single-Spindle Turning Center Manufacturer: EMAG Type: VL 400 (Siemens) Year of Manufacture: 2021 Operating Hours: Approx. 1,848 Turret Base Unit and Y-Axis Slide Unit HP Turret Drive Unit for Driven Tools (C442) with Internal Coolant Supply Max. Speed: 6,000 rpm Crosscut Speed: 3,200 rpm Tool Carrier Unit for Driven Tools: 12 x BMT75 Circular Workpiece Transport System, O-Design Drag Frame System for 10 Workpieces Workpiece Height (including workpiece pallet): Max. 300 mm Workpiece Weight: Max. 60 kg Set (10 pcs.) Drag Frames for O-Band For Workpiece Diameters: 150 - 400 mm Blow-Off of the Workpiece and Clamping Device (Pick-up) Coolant supply: 15 bar Coolant pump, flow rate approx. 80 l/min at 15 bar. Cooling unit (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C). Coolant double filter, manually switchable Filter mesh 100 μm, with electrical and mechanical contamination indicator Chip conveyor Hinged belt design: to the rear Chip discharge height 1,100 mm. (with integrated coolant reservoir, capacity approx. 500 l) Emulsion mist extraction: Extraction capacity approx. 800 m3/h Flushing gun Workpiece measurement with measuring probe Blow-off measuring probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) 3-color indicator light Axial drilling and milling head - BMT75 CC 5x 90° angle drilling and milling heads - BMT75 CC (i=1:1) Tool set for OP10 + OP20 Hydraulic full clamping cylinder size 150 - with 1 media feed-through Cjlqevq Iwys Rg Shsgt Max. tensile force 10,850 daN at 70 bar Coolant through the spindle Programmable Clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick-change max. = 2,200 rpm (standard speed according to DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Flushing nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 external finishing tool 1x 8.BMT25VL8IKX50 external roughing tool 1x 60.7516VL8IKDI15 engraving tool 1x 60.7516VL8IKDI15 tapping chuck 1x 40.75V5KRVL8IKD 50mm cutter head 3x 80.75V5VL8IKD boring bar holders 2x 27.V520HYDL26 Drill Bit, 20 mm Diameter 1 x 42.V522L08Ik Drill Bit, 22 mm Diameter 1 x 27.V514WNL31 Drill Bit, 14 mm Diameter Software Package Operating Instructions / Maintenance Manual 170425

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t Colq Rotpu Szeg Shsgt The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Condition: good (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 5005, NC Turning-Mill Center, Berthiez T1-240/50F Year of 1989 Cgjlqowa In No Rg Shet Serial No. 5005, Three-jaw chuck, center height 900 mm, swing diameter over bed max. 950 mm, center width 6,500 mm, max. load between centers 10 t, 50-station tool changer for milling tools, tool changer for turning tools, chip conveyor, drive power for turning operation 75 kW, travel X 700 mm, SK50 cutter holder, drive power 25 kW, 2 steady rests, tailstock, equipped with 20 cutting tools, control system, Siemens, type System8, chip conveyor. Disassembly and transport are to be carried out by the buyer.

Condition: used, _____ Description: Year of manuf. : 2011 Control : Siemens 840 Dsl Turning diam. : 250 mm Spindle: Technology:Motortspindle Speed:6.000 rpm Power (max.):39 kW Torque (max.):460 Nm Clampingcylinder:Full-Clampingcylinder Cgelov S Dnkoq Rg Shst Workpiececlamping:3-Jaw chuck, SMW Autoblock, KNCS-NB-260-72 Toolcarrier I: Technology:Turret with 12 stations Taper:VDI 40 Tooldrive:6.000 rpm, 7,5 kW, 24 Nm Toolcarrier II: Technology:Drillingstation with Internal coolant supply Taper:Capto C8 In general: Movement in X/Z:1.180/525 mm Rapid travers in X/Z:60/30 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure Toolmonitoring:ARTIS CTM Automation:Workpiecestorage, Circulation systems for Storage, Type L Oilmistseparation:Interface Electrostatic extraction prepared

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand SIEMENS Model Sinumerik 840Dsl Main Drive Spindle motor power 28 kW (100% ED), 38 kW (40% ED) Workpiece Workpiece drm 170 mm Workpiece X 175 mm Additional Equipment Tool turret with 12 stations Drilling station for one drilling tool with Capto C8 holder incl. IK Full clamping cylinder SMW SIN-S 125 3-jaw power chuck with quick jaw change system Coolant system with paper band filter SBF100 (Flow rate 100 l/min, 540l) Electrostatic emulsion mist extraction IFS IFE2000 (2000m³/h) Cgslq Rg Sjv Nb Nyshot Hinged belt chip conveyor with integrated cooling lubricant tank (Capacity approx. 360 litres, Chip discharge height 1250mm) Open pallet circulation system as L-belt with pick-up station (Storage capacity 30 workpieces, Diameter 30 - 170mm, Workpiece height max. 175mm, Max. weight 12kg) Suction not included Control Unit Brand SIEMENS Model Sinumerik 840Dsl Main Drive Spindle motor power 28 kW (100% ED), 38 kW (40% ED) Workpiece Workpiece drm 170 mm Workpiece X 175 mm Additional Equipment Tool turret with 12 stations Drilling station for one drilling tool with Capto C8 holder incl. IK Full clamping cylinder SMW SIN-S 125 3-jaw power chuck with quick jaw change system Coolant system with paper band filter SBF100 (Flow rate 100 l/min, 540l) Electrostatic emulsion mist extraction IFS IFE2000 (2000m³/h) Hinged belt chip conveyor with integrated cooling lubricant tank (Capacity approx. 360 litres, Chip discharge height 1250mm) Open pallet circulation system as L-belt with pick-up station (Storage capacity 30 workpieces, Diameter 30 - 170mm, Workpiece height max. 175mm, Max. weight 12kg) Suction not included This vertical turning machine was manufactured in 2011. The EMAG VLC 250 features a Siemens Sinumerik 840Dsl control system, a 12-station tool turret, and a 3-jaw power chuck with a quick jaw change system. It includes a coolant system with a paper band filter and an electrostatic emulsion mist extractor. Ideal for handling workpieces up to 175mm in height and 12kg in weight. For more information about this vertical turning machine, please reach out to us. Application Types Turning

Condition: used, Year of construction: 2007, x-travel 738 mm z-travel 240 mm swing diameter 200 mm turning height 275 mm Control Siemens Sinumerik spindle tunring speed 6500 U/min numbers of tools in magazin 12 total power requirement 82 kW weight of the machine ca. 14 t In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Cgslovdt N Ueq Rg Shst Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 1993, turning diameter ca. 500 mm swing diameter ca. 600 mm travel -x axis ca. 400 mm travel -z axis ca. 600 mm spindle turning speed range 2000 U/min spindle drive 63 kW control SIEMENS control SINUMERIK System 3 tool turret 1 x 12 Pos total power requirement kW weight of the machine ca. 9,3 t dimensions of the machine ca. m - R-version, turret right hand side of 3-jaw chuck - Accessories: hydr. 3-jaw chuck 400 mmø, various toolholders for turret, chip conveyor, coolant Cgelq Rgetyp Sue Shjt

Condition: ready for operation (used), Year of construction: 2004, operating hours: 22,953 h, General Data Machine weight 8000 kg Control Unit Brand SIEMENS Model 840 D SIEMENS POWER LINE Main Drive Spindle speed range 5000 rpm Spindle motor power 20 kW Movement X-Axis Movement 650 mm Y-Axis Movement +/- 50 mm Z-Axis Movement 300 mm Turret Number of turrets 1 Tools Type of tool holder VDI 40 Media Chip conveyor Yes Additional Equipment Measuring probe Driven tools C-axis High-pressure pump 20 bar, 500 l, double changeover filter Immersion cooler for cooling lubricant Electrostatic extraction from LTA Drip tray under the complete machine Cgelqjv I Hhfo Rg Shst 3 jaw chucks from Kitagawa B210 EWAB pallet conveyor loading station on the right This 4-axis DMG GILDEMEISTER CTV 250 vertical turning machine was manufactured in 2004. Ideal for precision turning operations, it offers robust construction and reliable performance. If you are looking to get high-quality turning capabilities, consider the DMG GILDEMEISTER CTV 250 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2012, turning diameter 140 mm turning length 630 mm Cgjlq Rjvdt E Asg Shst control Siemens 840 SL max. swing diameter over bed 250 mm main spindle: turning speed range - main spindle 0 - 5000 min/-1 max. torque 256 Nm spindle bearing diameter 110 mm spindle bore 52 mm spindle head Gr. 6 DIN 55026 chucking diameter max. 250 mm tool turret: number of tool places 3 x 12 Pos. tool taper VDI 40 max. tool weight 20 kg max. tool diameter 40 mm max. tool length 95 mm max. workpiece weight 20 kg max. workpiece diameter 140 mm travel: x-travel 300 mm z-travel 740 mm feeds: rapid traverse x 45 / z 30 m/min total power requirement 70 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 6,5 x 3,5 x 4,4 m In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens main spindle: max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm tool turret: number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg travel: Cslovdt N Ioq Rg Shjgt x-axis 450 mm z-axis 300 mm feeds: rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2007, turning diameter 250 mm swing diameter 280 mm turning height 1250 mm Control Siemens Sinumerik x-travel 320 mm z-travel 1220 mm chucking diameter 250 mm spindle tunring speed 5500 U/min diameter in the front bearing 130 mm spindle bore 65 mm total power requirement 80 kW weight of the machine ca. 17 t Cgolsvmikgeq Rg Shot In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!