Used Crankshaft Turning Lathe for sale (9,791)

Condition: excellent (used), Year of construction: 1974, machine/vehicle number: 6644-4, Webster Bennett 48 inch E-V Elevating rail ram type. 48 inch table 4 jaw with jaws high type, speeds; 6.3-140 rpm, serial number 6644-4, 50 inch under rail to table. 2 axes DRO, drive lock brake. 0.005” to 0.250” feeds per rev. Power clamp to rail, 50hp main motor. New 1974 Njdpfew A Nxbsx Akijlh

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total height: 1,930 mm, total length: 6,000 mm, total width: 2,500 mm, type of input current: AC, overall weight: 3,850 kg, input voltage: 415 V, number of spindles: 1, Equipment: chip conveyor, documentation/manual, CNC Dugard Eagle 200 with multifeed bar feed, can be viewed working. Machine Type: 2 Axis CNC Lathe Control: Siemens 802D Condition: Very Good Includes Njdpfe Afpvtjx Akielh Swarf Conveyor Multi feed auto bar feeder Tool setting probe 10 x Tool Holders Manuals Technical Specification Max Part Diameter: 480mm Max Turning Diameter: 280mm Max Turning Length: 508mm Z Axis Travel: 520mm X Axis Travel: 176mm Spindle Pull Rod Diameter: 52mm Hole Through Spindle: 62mm Turret Positions: 10

Condition: excellent (used), Year of construction: 2015, workpiece weight (max.): 20,000 kg, spindle motor power: 90,000 W, spindle speed (max.): 75 rpm, turning diameter: 4,000 mm, turning height: 1,900 mm, Equipment: documentation/manual, £200,000 PRICE REDUCTION FOR PURCHASE BEFORE NOVEMBER 5 Nledsy Uxdkopfx Akijh New 2015. Purchased 2022 for a project was cancelled before commissioning was completed and the machine has not been used in any production after commissioning. Very full documentation is available upon request. WE CAN SEND FILM OF MACHINE IN USE - ASK US! Main specification details. Turning diameter 3600mm. Maximum turning height 1900mm. Maximum table load 20,000kgs. Table speeds are infinitely variable between 14rpm and 75rpm. Table drive motor 90KW AC. Table torque to 61168NM. Z axis thrust 36000NM. X and Z axes traverse rates 1-5000mm/min. Ram is 320mm diameter Price, ex works BIRMINGHAM £130,000 VTT-WB can quote transport installation and commissioning

Condition: ready for operation (used), functionality: fully functional, spindle bore: 28 mm, input voltage: 400 V, spindle nose: D1/4, spindle speed (max.): 4,000 rpm, spindle speed (min.): 45 rpm, overall weight: 955 kg, For sale: AI DR1L S lathe – very complete with accessories For sale: an AI DR1 LS universal conventional lathe, complete with an extensive set of accessories. A robust and heavily built Dutch lathe, suitable for precise turning work and various tasks in a workshop, toolmaking shop, or for the serious hobbyist. Technical specifications AI DR1 LS Center height: 133 mm Center distance: 750 mm Turning diameter above the bed: 270 mm Turning diameter above the cross slide: 145 mm Main spindle bore: 26 mm Max. collet capacity: 18 mm Main spindle mount: Camlock D1-4" Main spindle taper: MC 4 Tailstock taper: MC 2 Longitudinal feed: 0.022 – 2.6 mm/rev. Metric thread: 0.2 – 7.5 mm Whitworth thread: 90 – 2 threads per inch Number of spindle speeds: 24 Spindle speeds: 45 – 4,000 rpm Motor power: 1 / 1¾ / 2½ hp Weight incl. standard accessories: approx. 855 kg Extensive accessories The lathe is supplied with, among other things: Various chucks Collets Taper attachment Tool holder Follow rest Various other accessories and tools And more The D1-4 Camlock spindle mount allows for quick and secure changing of chucks. With 24 spindle speeds from 45 to 4,000 rpm, a center distance of 750 mm, and a turning diameter of 270 mm above the bed, this is a particularly versatile lathe. With a weight of approximately 950 kg, it is a stable and well-built machine, suitable for both fine precision work and heavier turning operations. A great opportunity for someone looking for a complete AI DR1 S with many original and usable accessories. Condition: used Location: Emmeloord Asking price: € 6450 EX Nljdpfozxgy Eox Akish Inspection and demonstration are possible by appointment. If you are seriously interested or require additional information, please contact us.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Equipment: documentation/manual, Vertical turning center equipped with live tooling (M-specification), C-axis and an automatic loading/unloading system for efficient serial production. The machine is fitted with a 12-station turret, hydraulic chuck, chip conveyor and integrated automation. Technical Data - Max. turning diameter: Ø280 mm - Max. turning length: 200 mm - Spindle speed: 40-4,000 rpm - Through-spindle bore: Ø62 mm - Live tooling speed: 45-4,500 rpm - C-axis with 0.001° indexing - 12-position V12 turret - Spindle motor: 22/15 kW (peak/continuous) Operating Hours - Power-on time: 27,694 h - NC run time: 9,703 h - Spindle time: 8,888 h - Cutting time: 7,515 h Equipment - Live tooling Nedpfx Ao Ady I Rjkielh - C-axis - Hydraulic chuck - Automatic loading/unloading system - Parts handling conveyor - Chip conveyor - Full enclosure Machine is in good working condition and can be inspected under power by appointment.

Condition: excellent (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & SBF326-3.2M Bar Feeder Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. Nsdpfx Aksz H U I Rjielh With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB parts diameter 130 mm, length 110 mm spindle speed 7500 rpm 12-station turret max tool speed 6000 rpm power 24 kW, chip conveyor Nledpfxsx Irzve Akieh

Condition: refurbished (used), Year of construction: 1998, workpiece weight (max.): 15,000 kg, travel distance Z-axis: 1,000 mm, chuck outer diameter: 1,750 mm, spindle speed (max.): 400 rpm, turning diameter: 2,100 mm, turning height: 1,350 mm, rotational speed (max.): 3,000 rpm, feed force Z-axis: 50,000 N, year of last overhaul: 2026, The Millennium provides very high precision turning and versatile machining capability. Always precise, always powerful. Features of this machine:- – Involute chain drive for very high speeds, very low noise – a 36” diameter Timken cross roller bearing, the ultimate bearing – see last page – All steel 1750mm dia. 4 jaw chuck for high speeds. Maximum loading 15,000kgs. – A servo powered C axis control that provides backlash free C axis movement – high power and high accuracy – 200mm square forged steel ram - high accuracy heavy cutting when required and incorporating a 15KW ISO 50taper live spindle providing speeds 20 to 3000rpm for rotary contour milling, pcd drilling and angle milling and grinding with attachments (new heads can be provided to order). 1350mm maximum height under ram – Automatic pick up of turning tools, live tools and attachments from the 18 pocket tool magazine – Raise and lower crossrail - high precision latching and clamping at 200mm pitches – flexibility without loss of accuracy Fanuc 18Ti. A very precise, powerful and versatile machine tool. Performs all functions shown in photo gallery 12 months guarantee Nodpfey Uwxtex Akijlh

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 112902, Title: Intorex CNI 1500 CNC Control Lathe - 2015 Model Description: Experience precision engineering at its finest with the Intorex CNI 1500 CNC Control Lathe, a powerhouse of machining. Manufactured in 2015, this machine embodies reliability, accuracy, and efficiency, making it an ideal addition to any workshop or manufacturing facility. Key Features: Njdjr Tiukepfx Akislh Year of Manufacture: 2015 Brand: Intorex Model: CNI 1500 Control: CNC Control Max. Turning Diameter: 300mm Diameter Max. Turning Length: 1500mm Inc. Drawing and programming Software IntorEDIT (easy to use) Additional Features: Adjustable Tailstock (12 & 18mm), Round steady (90mm Dia & 140mm Dia), 2 pneumatic centerers to facilitate the loading of the pieces Applications: Ideal for precision turning operations in Woodworking / Joinery Reason for Selling: Upgrading to newer equipment. Comes with rolling cabinet for accessories and tooling

Condition: like new (used), Year of construction: 2023, Maximum turning diameter 220mm, distance between centres 800mm, swing over bed 240mm, spindle speed 4,000rpm, milling speed 12,000rpm, Njdpfez D Eupex Akijlh sub-spindle speed 4,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 66mm, 2 X 12 station turrets, spindle power 35Kw, Y axis + /- 45mm, swarf conveyor, coolant., Fanuc 31i.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Nsdozlc Apopfx Akiolh Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: good (used), Year of construction: 1998, functionality: fully functional, Schaublin 102 N, Machine number BL 329218, Year of manufacture approx. 1998, Center height 102 mm, Distance between centers 375 mm, Max. turning diameter over bed 200 mm, Nedpfx Akozlcz Eeiolh Max. turning diameter over slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories.

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, feed length Z-axis: 1,000 mm, workpiece weight (max.): 15,000 kg, spindle motor power: 37,500 W, spindle speed (max.): 415 rpm, turning diameter: 2,100 mm, turning height: 1,300 mm, workpiece diameter (max.): 2,100 mm, year of last overhaul: 2026, As with all Millenniums this machine has the wonderful base structure and table drive design that makes all the production wishes possible – the highest accuracy and the highest chip removal Nlsdpfxey Uw Sgo Akijh When this machine is delivered to the customer it will have been fully serviced and refurbished to ensure those qualities are ready for you to use turning, pcd drilling, rotary contour milling, angle drilling, grinding – see it all on the Millennium films on the website Only the best machine tools are designed and built with this quality and strength

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over bed Ø16 mm mm weight of the machine ca. 2,3 t Nsdpsztfw Ejfx Akielh dimensions of the machine ca. 2045 x 900 x 1685 m

Condition: like new (used), Year of construction: 2027, TECHNICAL DATA: Turning diameter 2000 mm Max. workpiece height 1200 mm Max. workpiece weight 8000 kg Faceplate diameter 1800 mm Faceplate speed range / 4 automatic stages 0-210 rpm Max. faceplate torque 31500 Nm Main drive power 55 kW EQUIPMENT: - 4-position turret or tailstock with 2 Capto clamping units - Central lubrication system SKF/VOGEL - Commissioning including training - 12 months warranty - Complete electrical equipment 230/400 V, 50 Hz, Made in Germany, CE standard OPTIONS: - Steel chucks - Tool changing system (10 positions) - Machine enclosure - Chip conveyor - Coolant preparation - Side support - Machine version with tailstock and 2x Capto C6 - ... CONTROL: Nodef S Hcyopfx Akijlh CNC cycle control Fagor 8037TC/8055TC* or Siemens OTHER: CE Declaration of Conformity Geometrical acceptance test according to DIN 8609-2

Condition: good (used), Technical specifications: * Over bed – 270 mm Nlsdpo Afu Injfx Akijh * Center height – 125 mm * Maximum distance between centers – 500 mm * Spindle bore – 28 mm * Collet type B32 * Longitudinal travel of the carriage – 440 mm * Cross travel – 130 mm * Travel of the small tool-holding carriage – 90 mm * Travel of the tailstock sleeve – 100 mm Equipment: * 3-jaw chuck, 125 mm diameter * Multifix A turret * 3 Multifix A tool holders * Quick-change tool system * 1 steady rest * 1 rear carriage

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2560460122, Tornos Swiss GT13/6 - Sliding Headstock Automatic Lathe CNC Control: FANUC 31i-B, 6 axes, 13 mm capacity Basic Machine Equipment: - 6 linear axes - Independent main and counter spindle - Synchronously rotating guide bush - Adaptation for operation without guide bush - C axis for main and counter spindle - Adjustable pneumatic ejector incl. counter spindle coolant flushing - 3-color signal lamp (yellow, red, green) - Centralized lubrication - Electrical interface for Tornos bar feeder - Oil mist extraction interface - Interface for fire protection system - Interface for customer M-function (6 inputs and 6 outputs) - Compliance with CE and EMC standards Main Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076) - Max. bar diameter without preparation: 10 mm - Max. bar diameter with preparation: 13 mm - C1 axis function Guide Bush: - Max. speed: 15,000 rpm - Max. diameter of synchronously rotating guide bush: 13 mm (with integrated motor), guide bush type: B (853) Nlodpfx Akeyzigceish - Max. workpiece length in one clamping: 180 mm - Adaptation kit for operation without guide bush (max. travel: 30 mm) Tool System for Main Operations: - Tool holder for 5 turning tools 12x12 mm on the front of the carrier - Tool holder for 4 turning tools 12x12 mm on the rear of the carrier - S11 tool drive (10,000 rpm) for rotating tools mounted on the front of the carrier X1/Y1 - 1 drive module for cross machining with 3 spindles for ESX 16 collets (2 x 10,000 rpm and 1 x 6,250 rpm) - S21 tool drive (6,000 rpm) for up to 2 driven units mounted on the rear of the carrier X1/Y1 (driven units not included) - Tool carrier with 4 bores Ø 22 mm for stationary finishing tools Counter Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076), max. Ø capacity: 13 mm - C4 axis function Tool System for Secondary Operations: - Base carrier for 8 back-working tools; on the 4 upper positions, rotating and/or stationary tools can be mounted (rotating tools not included) - 4 lower positions with 4 fixed holders for ESX 16 collets - 2 stationary holders with Ø 22 mm bores (for upper positions) - S51 tool drive (6,000 rpm) for driving back-working tools (max. 4 rotating tools) ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing options to suit your requirements. Whether down payment, installment plan, or individual financing solutions – together we will find the right option for you. Upon request, we will also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and punctual process so you do not have to worry about a thing.

Condition: used, High Speed Elevating Rail Vertical Boring Machine with Power Indexing Turret & Copying Attachment. Four Jaw Chuck Size 48" Diameter. Table Swing 60" Diameter. Max Height Under Cross Slide 60" Turret Rise & Fall 36" Njdpjzy Ik Iofx Akiolh Speeds 10.5 - 234 rpm With 4 Sets of Chuck Jaws, Equipment, Chuck Guards & Newall Digital Readout System.

Condition: used, Year of construction: 1988, functionality: fully functional, overall weight: 2,200 kg, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t +++++ Njdpfx Ask Sat Dokislh Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), functionality: fully functional, spindle bore: 28 mm, input voltage: 400 V, spindle nose: D1/$, spindle speed (max.): 4,000 rpm, spindle speed (min.): 45 rpm, overall weight: 850 kg, For sale: AI DR1 S lathe – very complete with accessories For sale: an AI DR1 S universal conventional lathe, complete with a comprehensive set of accessories. A robust and heavy-duty Dutch lathe, suitable for precise turning work and a variety of tasks in a workshop, toolmaking shop, or for the serious hobbyist. Technical data AI DR1 LS Center height: 133 mm Distance between centers: 470 mm Swinging diameter over bed: 270 mm Swinging diameter over cross slide: 145 mm Spindle bore: 26 mm Max. collet capacity: 18 mm Spindle nose: Camlock D1-4" Spindle taper: MC 4 Tailstock taper: MC 2 Longitudinal feed: 0.022 – 2.6 mm/rev. Metric thread: 0.2 – 7.5 mm Whitworth thread: 90 – 2 threads per inch Number of spindle speeds: 24 Spindle speeds: 45 – 4,000 rpm Motor power: 1 / 1¾ / 2½ hp Weight incl. standard accessories: approx. 855 kg Extensive accessories The lathe comes with, among other things: Various chucks Collets DRO EASSON Tool holder Follow rest Various other accessories and tools Nljdpszxg Agefx Akioh And more Thanks to the D1-4 Camlock spindle nose, chucks can be changed quickly and easily. With 24 spindle speeds from 45 to 4,000 rpm, a distance between centers of 750 mm, and a swinging diameter of 270 mm over the bed, this is a particularly versatile lathe. Weighing approximately 855 kg, it is a stable and robustly built machine, suitable for both fine precision work and heavier turning operations. A great opportunity for someone looking for a complete AI DR1 S with many original and useful accessories. Condition: used Location: Emmeloord Asking price: €8750 EX Inspection and demonstration are possible by appointment. If you are seriously interested or would like additional information, please contact us.

Condition: new, Year of construction: 2027, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Nsdpfxjd Ivynj Akiolh Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2 step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: Cycle control OTHER: Geometrical-acceptance according DIN8609

Condition: ready for operation (used), Year of construction: 2008, operating hours: 411 h, functionality: fully functional, chuck outer diameter: 1,200 mm, spindle speed (max.): 300 rpm, spindle speed (min.): 2 rpm, turning diameter: 1,600 mm, Massa Heavy Duty Precision CNC Vertical Borer Model: VL-1200 ATC + C Control: Fanuc 18i TB Year: 2008 Max Swing Dia:1600mm Max Turning Dia: 1350mm Max Turning Height: 1250mm 4 Jaw Scroll Chuck Dia: 1200mm Table Speeds: 2-300 RPM 16 Station Tool Changer ‘C’ Axis 360 Degrees Nsdozv T A Ijpfx Akielh ‘C’ Axis Milling Spindle BT 50 Dimensions: 6300 x 4500 x 5800mm Weight: 33,000 KGS

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Nlsdpfx Aoxdmgvjkioh Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0509, Technical specifications Nljdpfx Ako Aarq Njieh Manufacturer: STAR Micronics Type: ECAS-20 Year of manufacture: 2011 CNC long-turn lathe Control system: Star Motion Control System Max. turning diameter: 20 mm Spindle stroke: 205 mm CNC axes: 10 Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Spindle power: 2.2 kW / 3.7 kW each (30 min.) C-axis: main and counter spindle Powered tools up to 8,000 rpm Turning tools: 4 front, 2 rear Powered tool positions up to 6 (optional) Drilling diameter max. 10 mm Milling diameter max. 10 mm Thread cutting up to M8 Coolant tank: 120 liters Connected load: 8 kVA Weight: approx. 3,500 kg Dimensions: 2,588 x 1,150 x 1,765 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 61,700 h, functionality: fully functional, machine/vehicle number: 7831, spindle motor power: 5,500 W, turning length: 231 mm, spindle speed (max.): 10,000 rpm, turning diameter: 25 mm, spindle bore: 25 mm, overall weight: 3,000 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, feed length Y-axis: 534 mm, feed length Z-axis: 230 mm, total width: 1,400 mm, total length: 2,400 mm, total height: 2,060 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, bar diameter (max.): 25 mm, quill travel distance: 230 mm, quill diameter: 25 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, input voltage: 400 V, power: 5.5 kW (7.48 HP), travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, travel distance Z-axis: 230 mm, operating pressure: 6 bar, Equipment: documentation/manual, rotational speed infinitely variable, Tornos Deco SIGMA 20s Swiss-type automatic lathe, including Robobar SBF-532 3000mm bar feeder, Mayfran Consep chip conveyor with drum filter (unique version), electrostatic oil mist collector, and an automatic CO₂ fire suppression system (Kraft & Bauer). Fitted with a Fanuc 31i-model A CNC control, spindle speeds up to 10,000 RPM on both the main and sub spindles. The machine features 6 axes and 22 tooling positions: Main spindle: 12 positions, 6 of which are driven (up to 6,000 RPM) Sub spindle: 10 positions, 6 of which are driven (up to 6,000 RPM) Also equipped with high-pressure coolant, up to 80 bar. The machine can be inspected under power. Dismantling and transport are the responsibility of the buyer. Nljdjyrg Ahopfx Akijh Parts included with the machine: • External holder left, long – 6× (417608) • External holder left, short – 1× (417606) • Single driven holder, reduced speed – 2× (417612) • Double clamping, long – 2× (417617) • Double clamping, short – 2× (417620) • Driven block – 2× (417624) Bushings for pusher diameters (216787): • Ø10 • Ø16 • Ø20 • Ø25 Ejector set: • Ø5 to Ø20 (in 1 mm increments)