Used veneer splicing machines for sale (35)

Condition: new, input voltage: 400 V, input frequency: 50 Hz, For joining veneers with thicknesses ranging from approximately 0.3 to 3.0 mm. The machine uses a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tensile strength ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded internally, thus eliminating the need for sanding the adhesive medium. Specific features: * Torsion-resistant C-frame design made of steel * Stainless steel worktable * Standard heating system * SP control system * Pneumatically regulated adhesive pressure * Disc wheel system with tolerance compensation for various veneer thicknesses * Adjustable heating performance for both idle and processing modes * Tool-free adjustment of the adhesive pressure roller * Fully automatic start/stop function via photoelectric sensor Technical data: Throat depth: 1250 mm Feed: 4 speeds, approx. 15, 30, 45, 60 m/min Veneer thickness: approx. 0.3 – 3.0 mm Operating voltage: 400 V, 50 Hz, 3 phase Compressed air connection: R 1/4'' Compressed air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA Hfedpfxsxdxccs Aalsd Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offers available upon request! Art. No. 0149650

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, OUR BESTSELLER – 1000 mm Throat Depth Veneer splicing machine for gluing veneer strips including glue application unit with nearly horizontal glue application disc. Hfsdpoxdxktjfx Aaled Perfect in combination with glue cooling system (optional). NEW INDUSTRY 4.0 All essential machine and performance parameters are recorded, transmitted and made available centrally for analysis (optional). Additional modules for monitoring power and compressed air consumption available (optional). SPECIFIC FEATURES - Innovative veneer feeding system with disc wheels and tolerance compensation mechanism for jointing without offset - Low-maintenance, energy-saving, and veneer-friendly high-performance plastic chains (excellent sliding properties, minimal heat conduction, and no discoloration) - 12 mm slim, chrome-plated heating rails ensure minimal stress on veneer due to shrinking, and significantly reduced energy consumption - Intelligent automatic energy management for standby and operating mode - Intuitive control panel with all key functions at a glance, parameter memory TECHNICAL DATA* Throat depth: 1,000 mm Veneer thickness: approx. 0.35 – 2.5 mm, optionally from approx. 0.25 mm, optionally up to approx. 5.0 mm Veneer lengths: from approx. 300 mm Veneer width: from approx. 35 mm Feed speed: steplessly adjustable from 12 – 55 m/min Operating voltage: 400 V, 50 Hz, 3 Ph + N + PE Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar *Subject to material testing, depending on wood species and micro or thick veneer package (option) only without micro and thick veneer package (option) GLUES Suitable for urea resin adhesive Glue offer available on request! Item No. 0164700

Condition: new, Year of construction: 2026, functionality: fully functional, throat depth: 1,200 mm, empty load weight: 2,000 kg, table width: 1,200 mm, Veneer Splicer with Integrated Gluing System Manufacturer: Fisher & Rückle Model: IMPETUM 1200 (2025 Model) Includes 4 mm Veneer Thickness Conversion Kit For the quick and easy conversion of the IMPETUM for processing veneer thicknesses up to 4 mm. The conversion kit includes a foot pedal for manual triggering of veneer infeed. For gluing and producing seamless lengthwise joints of parallel-joined veneer strips in a single operation, using standard urea glues. Technical specifications: - Veneer strips must not show extreme tension or waviness. - Veneer strip length (with the grain): 380 - 4000 mm - Veneer strip width (across the grain): 45 - 1200 mm - Veneer thickness: 0.4 - 1.5 mm (up to 4 mm with conversion kit) Hjdpfxexd Apmj Aalefd - Feed speed: 5 - 50 m/min - Throughput speed (practical average value): approx. 20 - 30 m/min - Heating zone length: 1000 mm - Max. heating temperature: 200 °C - Throat depth: 1200 mm - Working height: approx. 960 mm Glue pot capacity: 150 g Glue type: Urea glue Glue pot cooling: Water cooled Features: - Storage of machine settings for recurring orders. - Separate electric drives for chain drive and glue application. During pauses, the chains can be stopped to prevent wear, while the glue in the pot remains in motion to prevent lump formation. - Glue is applied only to the newly fed veneer strips, significantly enhancing joint quality. - Robust, virtually maintenance-free stainless steel transport chains. - Six heating zones for individual temperature settings. - Infinitely variable assembly speeds. - Touch panel with displays for temperature, speed, and pressure. - Easily accessible glue pot for fast refilling or cleaning. - Extended glue usability thanks to integrated glue pot cooling. - Glue dosage system ensures consistent and even glue application without excess glue. Connected load: approx. 3 kW Compressed air: 6 bar Compressed air consumption: 5 NL/min Shipping dimensions: approx. 2300 x 2300 x 1850 mm Weight: approx. 2,000 kg

Condition: excellent (used), Veneer splicing machine Hodpetq Ey Tjfx Aaljfd Model : KUPER FWJ 920 In very good condition.

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Hfedpfoumrgaex Aaljd Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Tape (paper) width 6 mm Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Roll (width) 65 mm Tape running meter 3200 m Electric energy 1,1 kW Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: good (used), Year of construction: 1990, Kuper FW1150 veneer sewing machine, machine no. 30108291, built around 1990 Hfedpfx Aev Rvpwjaljd

Condition: used, Kuper FW 630 Mini The ideal machine for small veneer quantities with the technical advantages of all KUPER zig-zag gluing machines: Discus disks with tolerance compensation mechanism. The gluing medium is a KUPER special glue thread. The glue thread is automatically applied in a zig-zag line and guarantees tight and firm joint connection. The glue line is applied during pressing inwards during pressing, which means that the adhesive does not need to be sanded off. is no longer necessary. Technical data: Stand design 630 mm Hfjdsbi I Apjpfx Aalsd Veneer thickness approx. 0.4 - 2.0 mm Feed rate approx. 7 m/min Operating voltage 230 V, 50 Hz/60 Hz Total connected load 110 VA Space requirement 1050×905 mm = 0.95 m² Total height 475 mm Net weight 95 kg Gross weight 110 kg always 10 pieces in stock FW 420 FW 630 FW 920

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Hjdpfxjvxvc Hj Aalefd Year 2007. Very good condition. Available immediately.

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer crossfeed splicing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Hfsdpfx Aaeumrf Ajled Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Compressed air 6 bar Glue types PVAc or UREA based

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg Stacking device DA-2200 Veneer format length (longitudinal to the fibre) 600 * - 1500 mm Veneer format width (transverse to the fibre) 500 * - 2200 mm Maximum stacking width for output on the - right-hand side 2200 mm - left-hand side 2200 mm - back 1500 mm Hedpfx Aaet Akcfslsfd Stacking height max. 500 mm Power consumption from FZR-15 Weight 1200 kg Lifting table 2500 mm L x 1200 mm W. 1000 kg