Used Vmx 1 for sale (78,396)

Condition: good (used), Year of construction: 2005, Hurco machining center VMX 1 condition see pictures Hjdpfx Akov Nzucoijw

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,050 mm, working height: 100 mm, working length: 3,250 mm, TECHNICAL DETAILS Working length: 3,250 mm Working width: 1,050 mm Working height: 100 mm Drilling unit Vertical drilling spindles: 18 Horizontal drilling spindles, X-axis: 4 Horizontal drilling spindles, Y-axis: 2 Tool stations: 4 Position: rear MACHINE DETAILS Milling spindle power: 7.5 kW Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Grooving circular saw for X and Y direction, 90° Hsdo Aggu Aspfx Akiew Rear tool changer CE marking

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: FANUC, controller model: 0i-MF Plus 10,4", total height: 3,438 mm, total length: 4,400 mm, total width: 3,900 mm, table width: 800 mm, table length: 1,700 mm, overall weight: 13,000 kg, spindle speed (max.): 1,200 rpm, coolant supply: 30 bar, distance table center to spindle nose: 920 mm, spindle motor power: 25,000 W, spindle nose: ISO 40 (DIN 69871), number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, New vertical machining centre equipped with a FANUC 0i-MF Plus control, 10.4" display, including Manual Guide I and AICC II. Table measuring 1,700 × 800 mm with a permissible load of 2,000 kg/m². Axis travels of 1,650 mm in X, 800 mm in Y and 800 mm in Z. Table-to-spindle-nose distance from 120 to 920 mm; spindle centre to column 882 mm. Cutting feed of 1 to 15 m/min, with rapid traverse rates of 36 m/min on the X and Y axes and 24 m/min on the Z axis. Hjdozw Ex Djpfx Akiow Direct-drive DDS spindle with ceramic bearings, 7/24 steep taper ISO 40 to DIN 69871, 12,000 rpm and a power rating of 15 to 25 kW. All three axes run on roller-type linear guideways (PMI, Taiwan) with preloaded ball screws. Swing-arm automatic tool changer with 24 stations, accepting tools up to 80 mm in diameter, 300 mm in length and 8 kg in weight. Through-spindle internal coolant supply at 30 bar with filtration unit, oil/coolant separator, hinged-belt chip conveyor combined with two screw-type chip augers, and a rear chip flushing system with coolant gun. Fully enclosed splash guarding with interlocked front door, spindle oil chiller, heat exchanger, automatic centralised lubrication and air-conditioned electrical cabinet. Rigid tapping cycle, eight open M-functions, data server with Ethernet connection and 2 GB memory card. Three-colour signal light, dustproof electrical system, spindle air seal and levelling bolts with pads. Machine supplied without counterweight. Power supply via a 400 V / 50 Hz three-phase transformer rated at 30 kVA; compressed air requirement 6 to 8 bar. Overall dimensions 4,400 × 3,900 × 3,438 mm, extending to 5,500 mm in length with the chip conveyor fitted. Machine weight 13,000 kg. CE certified.

Condition: ready for operation (used), Year of construction: 1992, A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible. Hedpfxeyw Sv Ss Akiow

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 183 h, total length: 685 mm, total height: 1,070 mm, total width: 645 mm, overall weight: 120 kg, input voltage: 230 V, laser power: 30 W, feed length X-axis: 165 mm, feed length Y-axis: 165 mm, feed length Z-axis: 300 mm, space requirement length: 1,495 mm, space requirement height: 1,870 mm, space requirement width: 1,255 mm, Formlabs Fuse 1+ 30W SLS Production Cell: 2 Printers, Fuse Sift with Industrial Vacuum, Fuse Blast with Polishing System and 4 Build Chambers Complete, ready-to-run SLS production system in great condition, sold as one package What is included - 2 x Formlabs Fuse 1+ 30W SLS 3D printers (230V), each with 2 build chambers (4 in total) - 1 x Formlabs Fuse Sift powder recovery station (230V) - 1 x Formlabs Industrial Vacuum 230V, supplied with the Sift [hose and accessories included] - 1 x Formlabs Fuse Blast automated blasting station with the Fuse Blast Polishing System upgrade (cleans and polishes in one step) Hours and condition - Printer 1: 1,369.68 print hours - Printer 2: 183.6 print hours (very low) - All units in great condition. Serial numbers available on request. Why this setup Four build chambers across two printers let you swap chambers and start a new print as soon as the last one finishes. The Sift and vacuum handle powder recovery and the Blast handles finishing, so no further post-processing equipment is needed. Key specification (per printer) - Build volume: 165 x 165 x 300 mm - Laser: ytterbium fibre, 30 W - Layer thickness: 110 microns Hsdpfxe Adqx Tj Akiew - Materials supported by Formlabs: Nylon 11, Nylon 11 CF, Nylon 12, Nylon 12 GF, TPU 90A - Power: 230V, dedicated circuit Offers: offers on the full package are welcome. A separate sale of one printer may be considered for the right offer; please message to discuss. Collection and delivery: not included in the price. The buyer arranges and pays for collection or pallet freight, including packing and loading. Each printer weighs about 120 kg without chamber or powder, so a forklift or tail-lift is needed. Allow access of about 125.5 x 149.5 x 187 cm per machine. Viewing by appointment.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,000 mm, total length: 1,600 mm, total width: 1,600 mm, type of input current: three-phase, controller manufacturer: Union Dialog electronic control, compressed air connection: 6 bar, water pressure: 2 bar, Used 2018 Union MDMV 1 closed-circuit vacuum solvent degreaser, 50kg basket, Dialog control, Industrial Frigo chiller and 2 Safechem units. Manufacturer: Union Model: MDMV 1 Machine Type: Closed-circuit vacuum solvent metal degreasing / component cleaning machine Year: 2018 Condition: Excellent Includes: Industrial Frigo GR2A 30/Z industrial water chiller & 2 x SAFECHEM SAFE-TAINER chemical storage/handling units Machine Description Used 2018 Union MDMV 1 industrial metal degreasing and component cleaning machine, designed for precision cleaning of small and complex metal components using super-stabilised perchloroethylene (PCE / PER / tetrachloroethylene). This is a closed-circuit hermetic vacuum solvent cleaning system incorporating washing, rinsing, vapour degreasing, solvent recovery/distillation and vacuum drying within an enclosed process. Technical Specifications Maximum Basket Capacity: 50 kg Solvent Type: Perchloroethylene / PCE / PER / Tetrachloroethylene – C₂Cl₄ Solvent Load: Approx. 397 kg / 248 litres Main Electrical Supply: 400 V / 3 Phase / 50 Hz Installed Power: Approx. 23 kW Rated Current: Approx. 46 A Steam Pressure Requirement: Approx. 4–5 bar Compressed Air Requirement: Approx. 6–8 bar Water Pressure Requirement: Approx. 2–3 bar Floor / Ground Loading: Approx. 549 kg/m² Control: Union Dialog electronic control This particular machine also has a substantial integrated solvent-management system incorporating working and recovery tanks, solvent pump, fine filtration, swarf filtration, still/distillation system, condenser, heat exchanger, separator, decanter, vacuum pump and active-carbon treatment. Continuous Solvent Recovery A particularly useful feature of the MDMV design is the continuous solvent distillation/recovery system. Union states that MDMV machines operate under vacuum for rapid washing cycles and use continuous vacuum distillation with automatic final stripping of residues, allowing contaminated solvent to be regenerated and reused during production. Hedpez Itlwefx Akiew Industrial Frigo GR2A 30/Z Chiller Included The machine is supplied with a 2018 Industrial Frigo GR2A 30/Z air-cooled industrial water chiller. Refrigerant: R407C Refrigerant Charge: Approx. 5 kg Electrical Supply: 400 V / 3 Phase / 50 Hz Rated Current: Approx. 23 A Nominal Water Pressure: Approx. 3.2 bar Temperature Set-Point Range: -10°C to +25°C Weight: Approx. 390 kg The complete installation includes: 2018 Union MDMV 1 metal degreasing machine 50 kg maximum basket capacity Union Dialog control Closed-circuit solvent cleaning system Vacuum cleaning/drying system Rotating / oscillating basket system Spray cleaning capability Immersion cleaning capability Solvent vapour degreasing Integral solvent distillation and recovery Working solvent tank Recovered-solvent / waiting tank Solvent circulation pump Fine solvent filtration Swarf filtration Vacuum pump Condenser Heat exchanger Water / solvent separation Decanter Active-carbon vapour treatment system Floor safety / spill-containment tank 2018 Industrial Frigo GR2A 30/Z industrial chiller 2 x SAFECHEM SAFE-TAINER chemical handling/storage units Stainless steel containment trays Use and maintenance handbook Electrical documentation Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,676 h, functionality: fully functional, HURCO VMX 30 – CNC Vertical Machining Center with LEHMANN Dividing Table Manufacturer: HURCO Model: VMX 30 Year of Manufacture: 03/2002 Control System: HURCO Ultimax Machine Type: CNC Vertical Machining Center Technical Data X-axis: 760 mm Y-axis: 510 mm Z-axis: 610 mm Rapid Traverse X/Y/Z: 30/30/20 m/min Table Dimensions: 1,020 × 510 mm T-slots: 5 × 18 mm T-slot spacing: 100 mm Maximum Table Load: approx. 1,000 kg Spindle Speed: up to 10,000 rpm Spindle Drive Power: approx. 11 kW Tool Holder: SK40 Automatic Tool Changer 24 tool positions Tool holder SK40 HURCO Ultimax Dual-screen control system Special equipment CNC-controlled dividing table from LEHMANN Fully integrated into the HURCO control system Control directly via the CNC control system Fully functional Machine Dimensions and Weight Machine Weight: approx. 4,700 kg Machine Height: approx. 2,775 mm Footprint: approx. 3,870 × 4,170 mm including work area Condition and Scope of Delivery Hedpfx As Agwx Nskijw The machine is in used condition, commensurate with its year of manufacture, and shows visible signs of wear. Technically, the machine is fully functional. All existing machine functions, as well as the integrated LEHMANN dividing table, are functioning perfectly. The machine is sold including the LEHMANN dividing table. Not included in the scope of delivery: The clamping devices and clamping elements visible in the pictures Tools and tool holders The machine is suitable for single-part production as well as for small and medium-sized series. The machine can be viewed by appointment. The machine is expected to remain powered and available for demonstration until mid-calendar week 46/2026 (approx. November 11, 2026). An inspection and functional test while powered is possible within this period by arrangement. All technical specifications are without guarantee. Subject to prior sale.

Year of construction: 2013, operating hours: 700 h, condition: excellent (used), functionality: fully functional, Used Westeria Airtrack 1 Tracked Windsifter Year 2013 700 Hrs 2000mm wide feed belt / rotating drum Heavies Belt / Lights Belt Hsdpfx Aeyyxx Ejkisw Volvo Diesel / Electric Generator Driven 19,000 kgs Very Nice Unit Fully Serviced & Ready To Go Straight To Work

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 508 x 406 x 394mm, Table 660 x 381mm, Spindle taper BT30, 11.2kW Spindle Motor giving 15,000rpm, HAAS Control, 20 Station ATC, Coolant. Hjdpfx Ao Agn I Dekisw

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Hodsxwtu Tjpfx Akiew Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6740, type of input current: three-phase, total height: 2,600 mm, total width: 4,200 mm, distance table to spindle center: 2,300 mm, operating pressure: 4,000 bar, Product Waterjet Cutter Brand Resato Type R-LCM 3015-1 Measurements L x W x H approx. 420 x 260 x 230 cm Hodpfo Agu N Ajx Akijw Year 2006 Specifications with a Resato PJE-2-400 high-pressure pump, max. operating pressure 4,000 bar, 2 liters/minute, 19 kW. Please note! The high-pressure pump is mounted at a height of approx. 257 cm; the fencing will need to be professionally removed and subsequently reinstalled. Clemco sandblasting machine, model 2452, manufactured in 2006, 200-liter central control unit with display . Please note! The unit is still filled with water; the buyer must drain it themselves. Details Please note: The high-pressure pump is mounted on a container (approx. 240 cm high); the container is NOT included in the lot . Please note! The power supply must be professionally disconnected. The buyer must provide their own hoisting and lifting equipment and have the machine professionally removed from the premises.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 2019 automatic inline monoblock filling and capping machine for 5 litre bottles, with 8 filling heads. Supplied with infeed and outfeed conveyors. Listed as Canellitech Srl 8-1. The manual identifies the manufacturer as Rizzolio Equipments S.r.l., model RLV 8-1. Technical specification: ✅ Manufacturer - Rizzolio Equipments S.r.l. (listed as Canellitech Srl) ✅ Model - RLV 8-1 (8 filling heads) ✅ Year of manufacture - 2019 ✅ Set up for - 5 litre rectangular PET bottles with push caps ✅ Capping - push capping head ✅ Speed - up to 500 bottles per hour nominal. The manual states actual output depends on the operator. ✅ Electrical - 380V / 50Hz / 3 phase + neutral, 24V controls, electro-pneumatic ✅ Power - 1.0 kW max absorption, 2 kW installed ✅ Weight - 400 kg ✅ Dimensions - 2.7m L x 1.1m W x 2.45m H Condition: , lightly used. Hedjulpu Sjpfx Akiew Documents: EU Declaration of Conformity (Machinery Directive 2006/42/EC) included in the manual.

Condition: good (used), Floor weighing scale Hodox Hz Dqopfx Akiow K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Including ramp

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC Hsdps Agcl Ejfx Akijw total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1,525 x 660 x 610mm, Table 1675 x 660mm, Hsdpozh I Ebefx Akiow table load 2,000 kgs, Spindle speed 12,000 rpm, input 18Kw, Hurco Winmax 5Control, Spindle taper Din 40, 30 ATC, Coolant, Low volt light, Swarf Conveyor, spindle probe

Condition: used, Ishida Checkweigher and Metal Detector Fully stainless steel Reject bin Hodpfx Aksxtfymoiew Weighing range - 0 to 1200 grams 240 volts

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Hjdpjy Hlvwofx Akijw Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: excellent (used), Year of construction: 1997, operating hours: 48,889 h, functionality: fully functional, center width: 1,000 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height: 280 mm Distance between centers: 1000 mm Swinging diameter: 500 mm Hjdpfx Akj Afxxbsiew Diameter of rotation over bed: 570 mm Diameter of rotation over support: 340 mm Spindle speed max.: 2500 RPM MACHINE DETAILS Operating hours: 48,889 h EQUIPMENT Chuck

Condition: good (used), functionality: fully functional, FOR SALE: DECKEL FP1 Milling Machine Technical specifications: • Model: FP1 (Serial number: 54212/08) • Machining travels: X = 300 mm | Y = 150 mm | Z = 340 mm • Spindle: SK 40 taper • Speeds: Mechanical adjustment via a circular selector on the front panel • Power supply: 400 V / Three-phase • Weight: Approximately 750 kg Included equipment: • VISOMAT 3-axis digital display on an articulated arm • Circular rotary dividing table mounted on the table • Articulated work lamp • Protective bellows for the slides, in excellent condition • Chip collection tray integrated into the machine frame Hjdps Af Au Njfx Akiow Very clean used machine, slides in good condition, and ready for use.

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Manufacturer: Newsmith Stainless Ltd. Hedpfew Rn Eusx Akiew ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Year of construction: 2018, condition: used, This listing is for a Grant Controlled Rate Freezer - CRF-1 The unit is in full working condition and is ready for immediate release Product Overview: The CRF-1 Liquid Nitrogen-Free Controlled Rate Freezer is designed for precision-controlled freezing and cryopreservation of biological samples, such as embryos, stem cells, mammalian cells, spermatozoa, antibodies, tissue sections, and rodent organs. Unlike conventional liquid nitrogen-based freezers, the CRF-1 is liquid nitrogen and cryogen-free, eliminating contamination risks and making it suitable for use in cleanrooms and barrier facilities. It offers superior performance in terms of cell viability post-freezing and poses no fire hazard, unlike alcohol-based systems. The CRF-1 allows for highly accurate, reproducible, and controlled freezing rates, crucial for the cryopreservation of biological samples, ensuring optimal recovery upon thawing. Key Features: Cryogen-Free Design: The CRF-1 is free from liquid nitrogen and alcohol, offering a safer, cleaner alternative to traditional freezing methods. No contamination risk, making it ideal for use in sterile environments. Precise Cooling Control: The cooling rate is accurately controlled, especially for the critical nucleation/seeding phase, which ensures consistent and optimal recovery of cells. Wide Temperature Range: Capable of cooling down to -100°C with straws, offering a broad application range for biological cryopreservation. Simple Operation: The CRF-1 operates with or without a PC, and it can log data via PC software. Cooling profiles are displayed directly and can be customized. High Versatility: Compatible with cryovials, straws, bags, microplates, and Matrix-96-well block plates, allowing for research across multiple areas like stem cell research, transgenic embryos, mammalian cells, and more. Low Operational Costs: The CRF-1 runs at approximately 1% of the cost of liquid nitrogen-based freezing systems. Safety Features: Includes an optional Un-interruptible Power Supply (UPS) for complete cycle continuation in case of power failure. Compact & Quiet: Fits neatly on a bench-top and operates quietly, making it suitable for laboratory settings. Main Applications: Transgenic embryos research Stem cell research Clinical and research samples like lymphocytes and tissue cell lines Mammalian cell preservation (e.g., cardiomyocytes, adipose, liver, muscle) Cord blood-derived stem cells Adherent cells and stem cells in microplates Cell suspensions in numbered/barcoded arrays Robotic integration for high-throughput applications Veterinarian IVF applications Technical Specifications: Dimensions (w x d x h): 264 x 367 x 445 mm Hedpfjxv Dz Iox Akisw Weight: 9.8 kg Max Plate Temperature: 30°C Min Plate Temperature: -80°C (standard) or -100°C (dependent on model) Temperature Accuracy: ±0.5°C Temperature Stability: ±0.1°C Temperature Uniformity: ±1.0°C Max Cooling Rate: 10°C/min Max Temperature Stabilization Time: 5 minutes Key Benefits: Accurate and Reproducible Cooling Rates: Ensures controlled freezing rates and precise sample temperature management. Customizable Cooling Profiles: Choose from linear and non-linear profiles, or create your own tailored profile. No Cryogen or Liquid Nitrogen: Ideal for reducing contamination risk and the cost of liquid nitrogen. Low Running Costs: Estimated to cost only 1% of traditional liquid nitrogen-controlled freezing methods. End-of-Cycle Cooling Stability: Maintains a steady -100°...

Condition: excellent (used), Year of construction: 2001, Grid melter for blocks up to 25 kg. Designed for melting hard or frozen blocks of butter/margarine/fats for further processing. Capacity: 50-10,000 kg/h, and CIP cleanable, with 4 spray balls. Hot water (120°C - 2 bar) runs through the grid and bottom (spiral shape). Equipped with a double-acting pneumatic cylinder on the inlet cover. Includes connections for temperature and level sensors. Special horizontal and centrally positioned agitator with vanes below the grid (EDW 1-3 agitator). Documentation: operating and maintenance instructions available. Currently without controls. Hjdpfe Agfh Usx Akijw

Condition: good (used), mileage: 406,401 km, power: 235 kW (319.51 HP), first registration: 06/2004, fuel type: diesel, axle configuration: 8x2, fuel: diesel, color: green, driver cabin: day cab, emission class: euro3, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, = Additional options and accessories = - Enclosed cab - Cab - Air suspension - Tool box Hedpfs Af Uwtox Akisw = Notes = Scania P114.340 8x2*6 - Livestock 1 deck / Cattle - 3x steering axle - Manual gearbox Year of manufacture: 16-6-2004 Mileage: 406401 YS2P6X20002000028 1-deck livestock carrier for large cattle Lifting roof Loading ramp 3x steering axle Manual gearbox = Additional information = General information Year of construction: 2004 Axle configuration Suspension: Air suspension Front axle 1: Max. axle load: 8000 kg; Steered Front axle 2: Max. axle load: 7500 kg; Steered Rear axle 1: Double tires; Max. axle load: 11500 kg Rear axle 2: Steered Weights Unladen weight: 15,900 kg Payload: 16,100 kg GVW: 32,000 kg Condition Technical condition: good Optical condition: good

Condition: good (used), Year of construction: 2016, Pallet racking system, SSI Schäfer, approx. 1,220 pallet spaces, height: 5.56m, crossbeam length 3.60m, 500kg per pallet, approx. 1,220 pallet spaces, including wire mesh decking – used: Price ex works: €15,000 (net), disassembled, packed, and loaded! Manufacturer: SSI Schäfer Model: PR350 / Type B.1, Type: Longitudinal crossbeam racking Year of manufacture: 2016 (rebuilt in 2019) Racking height: 5,560mm, outer frame: 6,920mm Number of frames: 69 units, including 16 outer frames Hedpfs Aguywsx Akiew Racking depth: 1,250mm Number of storage levels: 5 (including ground level) 1st bay height: 1,360mm 2nd bay height: 1,400mm Support profile: U 100/50/4.0 Levels 2-5 Clear span: 3,600mm, profile INP 100 Number of crossbeams: 488 units Bay load: 2,000kg Max. pallet weight: 500kg Max. usable bay load: 8,000kg Wire mesh decking is installed on the levels Condition: good Available immediately (but still needs to be dismantled) Location: Weil am Rhein

Condition: excellent (used), Year of construction: 1994, Ref: 11166 . 1994 Jagenberg 78-1 Carton Gluer Suitable carton styles:      •     Straight-line cartons      •     Lock-bottom cartons Feeder Section      •     6 × 25 mm feeder belts      •     Feeder vibrator / jogger motor      •     2 adjustable main feeder gates Hodpe Afhirefx Akiew      •     Nip rollers Pre-Fold Section      •     2 carriers positioned throughout the pre-fold section      •     1st and 3rd crease line pre-fold facilities Gluing Systems      •      HHS electronic cold glue system with 3 Guns      •     Bottom glue pot with 3 mm glue disc Folding Section      •     2 carriers with central steel support for larger blanks Transfer / Trombone Station      •     Fitted with 2 adjustable carriers      •     Original Jagenberg counter and marker device Delivery Conveyor Total length: 4.3 m      •     2.5 m top compression section with adjustable lever pressure      •     Flow control stacker drive Total Machine Length 10.5 Meters