Used End Finishing Machine for sale (68,234)

Year of construction: 1997, condition: good (used), machine/vehicle number: 403970905140, Offer 23291 Technical data: Tube end-working machine with six-fold turret - tool holder. Tube diameter 6 - 40 mm Max. Forming length 100 mm Nwjdpfxjpr Utlj Akion Drive 400 V / 7,5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm Nwedjwk Rlxjpfx Akien weight: 240kg

Condition: ready for operation (used), Year of construction: 1996, A custom-built Schuster groove machining machine is available. Components: separation magazine, centering unit, end machining insertion end, round groove milling unit, 90° turning unit, trapezoidal groove milling unit, groove deburring unit, sawing unit, end machining shaft, insertion end deburring unit, inspection and carrying unit and embossing unit. Overall system dimensions X/Y/Z: approx. 8000mm/2400mm/2500mm, weight: approx. 13000kg. The electronics were overhauled in 2015. Including coolant tank and chip conveyor. Documentation available. An on-site inspection is possible. Nwsdpfxey Hvp Uj Akion

Year of construction: 1972, condition: used, This machine is 3x available. Data: Manufacturer: Landis Type: FRM 50 E-8 Year of manufacture: 1972 Nwjdpfx Akjg Umitoijn 

quill travel: approx. 100mm

 Distance between spindles in retracted position: approx. 550mm Workpiece diameter max.: 75mm travel: per unit 200mm 3 drive powers:
 8,5kW/ 750 1/min 12kW/ 1450 1/min 18kW/ 2960 1/min Remark: the machine is equipped for ø20 and 65mm long Accessories: with magazine

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. Nsdpfx Akjl Dw D Eeiewn With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, IRLE IRD 1600 CNC End finishing machine Manufacturer: IRLE, Type: IRD 1600 CNC Year of manufacture: 2004, Control: Max. workpiece diameter: 1,625 mm Min. workpiece pipe diameter: 406 mm Max. workpiece pipe length: 13,200 mm Min. workpiece pipe length: 6,000 mm Min. pipe wall thickness: 12 mm Max. pipe wall thickness in copying mode: approx. 40 mm Max. pipe wall thickness in CNC mode: 70 mm Max. pipe weight: 250 kN Nwsdpfx Akozqun Ueisn Height between the hall floor and the pipe inlet: 800 mm Overall machine length: approx. 24,000 mm Overall machine width: approx. 4,100 mm Overall height from floor to top of clamping fixture: 5,000 mm Machine weight: approx. 700 kN 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 02 - Headstock Rotational speed range of the faceplate: 7 - 27 - 105 min" Motor speeds: 300 - 1,150 - 4,500 min" Motor power: 100 kW Motor power in S1 operation: 14.3 - 129 - 105 kW Max. torque of the faceplate in S1 operation: 33,000 Nm Rated speed: 27 min" Diameter of the main spindle in the front bearing: 300 mm 03 - Faceplate, X-axis Faceplate diameter: approx. 1,950 mm Travel distance of the NC tool holder: approx. 650 mm Feed rate of the adjustable tool holder: 0.5 - 1,500 mm/min (infinitely adjustable) Max. achievable feed force: 25 kN 04 - Feed drive; Z-axis Feed travel of the headstock on the machine bed: 800 mm, infinitely variable Three-phase controlled servomotor: 0.5 - 200 mm/min Rapid traverse speed: 1,500 mm/min Feed force: 30 kN Torque of the feed motor Mt = 27 Nm 05 - Pipe clamping mandrels Clamping range: 406 - 1,625 mm Pipe weight per mandrel: 150 kN Adjustable clamping force: 10 - 200 kN Max. adjustment speed of the centrally adjustable clamping crossbars: 600 mm/min

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Nwodpezuzpyefx Akion Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: excellent (used), Year of construction: 1988, For sale: an industrial vibratory polishing machine from the renowned SPALECK brand (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. This robust machine was manufactured in 1988 and is designed for professional finishing of parts. The machine is ideal for: • Polishing surfaces • Removing burrs after machining • Rounding edges • Cleaning and preparing surfaces for painting or electroplating It works with various types of abrasive media – ceramic, plastic, or steel – depending on the type of parts being processed. Nodpfx Aez Slakekijwn Technical specifications: • Model: VAT-240 • Year of manufacture: 1988 • Maximum load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Factory serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The unit is complete, in good technical condition, and ready to operate after connection. It features a robust construction, a parts outlet with a rubber cover, and a convenient abrasive media replacement system. SPALECK is a German brand known for producing reliable vibratory finishing machines, which are highly valued in facilities worldwide.

Condition: reconditioned (used), IRD Model B750 End Drive Balancing Machine. Capacity 34,000kg (75,000lbs). Maximum Balance Length 5000mm (Approx). Max Rotor Diameter 3250mm (128"). Max Journal Diameter 508mm (20"). With IRD Model 295 Balancing Instrument and Operating Manual. Nedpfjz Eay Nex Akiswn For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79268 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2025, operating hours: 3,700 h, functionality: fully functional, machine/vehicle number: 21220, total height: 1,310 mm, tank capacity: 450 l, usable tank capacity: 310 l, input voltage: 400 V, outer diameter: 1,480 mm, We offer this very well-maintained rotary vibrator RA21, manufactured in 2025. This rotary vibrator is a versatile finishing machine for deburring, rounding, and polishing parts. It offers high finishing performance, easy operation, and reliable processes. Nwedpfxjzgti Ao Akijn The rotary vibrator has a sloped container bottom, which reliably guides the workpieces to the integrated screening area. The large screening area with a tangential outlet ensures safe separation of workpieces and grinding media. An automatic washing system is installed, which automatically removes grinding dust from the parts. The cleaning centrifuge is used to process contaminated process fluids. These systems are characterized by their high cleaning performance and are equipped with a separate process water tank for dirty and clean water. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2011, Sewing machine with inline end sheet tipper Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. The UNIVERSE performs 2 operations: Nipping and end sheet gluing. Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery • transfer to the end sheet feeder • nipping press • end sheet feeder with Hotmelt nozzle gluing and ROBATECH premelter • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min Nwodpou Utzyefx Akijn size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: DF 3-4/080096, total width: 1,185 mm, total length: 970 mm, total height: 2,400 mm, workpiece weight (max.): 15 kg, empty load weight: 420 kg, number of slots in tool magazine: 12, The machine was used exclusively for rounding the cutting edges of carbide drills and milling cutters. The machining area of the machine consists of a work container, which, depending on the desired abrasiveness of the machining process, is filled with a grinding or polishing medium. The workpieces are attached to holders, lowered into the work container, and moved through the medium via a planetary gear. The friction between the workpiece and the medium results in effective machining in the micrometer range, so that subsequent coating has a significantly higher adhesion. Control system: Siemens: Simatic Multi Panel, Touch Accessories: Stirring paddle, documentation, 3 transport carts each with one container, 12 holders, long version for short tools, 12 holders, short version for longer tools, approx. 130 reduction holders, diameter 4-25mm. Nwodsz N Tc Tepfx Akion

Condition: used, functionality: fully functional, total height: 600 mm, overall weight: 1,100 kg, total width: 800 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, SPALECK SKIN-800-600.2500 Vibrating Screen with Bars The SPALECK SKLN-800-600*2500 vibrating screen with bars is a combined, double-balance machine, designed with a welded steel construction that is resistant to vibrations. This equipment has been fully inspected and reconditioned and comes with a 6-month limited mechanical warranty or 1,000 operating hours*. The screening gap is approximately 250 mm long and features bolted-on rubber aprons, with continuous operation at 100% of the centrifugal force. Technical specifications: - Dimensions: 2500 × 800 × 600 mm. - Total weight: 1100 kg. - Drive: 2 unbalance motors. - Installed power: 3.4 kW. - Speed: 1000 rpm. - Electrical supply: 400 V / 50 Hz. - Electrical protection: IP66. - Operating ambient temperature: -20 °C to +40 °C. Nwodpfx Ake Afc Txoien To inquire about availability, equipment condition, and sales terms, please contact Grupo SPR.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 71400, For sale is a RÖSLER Rotomatic R 150/15 SE, including a separation station, conveying technology, control cabinet, and control system. This unit comes from our ongoing production facility and was dismantled solely due to a plant upgrade. The unit is fully functional, ready for immediate use, and can be inspected and demonstrated in operational condition by appointment. Technical data Manufacturer: RÖSLER Oberflächentechnik GmbH Model: Rotomatic R 150/15 SE Machine type: Continuous belt grinding machine Year of manufacture: 2016 Serial number: 71400 Working channel length: 15 m Total power: 17 kW Main drive: 12.5 kW Equipment Complete system including: Rotomatic R 150/15 SE Separation station Workpiece conveyor belt Grinding media return system Control cabinet with PLC control Pneumatic and process water technology Automatic continuous operation Integrated workpiece/grinding media separation Variable processing time Designed for continuous industrial operation Application areas Ideally suited for: Deburring Rounding Smoothing Cleaning Surface finishing Belt grinding of mass-produced parts Suitable for workpieces made of: Steel Njdpozizu Ejfx Akijwn Stainless steel Aluminum Brass Zinc die casting Sintered and stamped parts The Rotomatic is particularly suitable for the continuous processing of large quantities and can be easily integrated into automated production lines. The Rotomatic principle ensures that sensitive workpieces are processed particularly gently and according to the first-in-first-out principle.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,000 kg, total length: 3,200 mm, total width: 600 mm, input voltage: 400 V, inner dimension width: 580 mm, Equipment: rotational speed infinitely variable, Brand RÖSLER Type R2000 1 BT Electrical connection 380V Nodszfwl Sjpfx Akiown Dimension L (Length) 3200mm Dimension W (Width) 1400mm Dimension H (Height) 1850mm

Condition: refurbished (used), Year of construction: 2012, operating hours: 19,376 h, functionality: fully functional, machine/vehicle number: 57755, RÖSLER Vibratory Finishing Machine / Rotary Vibrator – fully functional – newly coated – in very good condition For sale is a high-quality vibratory finishing/rotary vibrating system from the renowned manufacturer RÖSLER. The machine is in very good technical and optical condition, is fully functional, and can, of course, be inspected on-site after prior arrangement. Price: €14,500 net A particular advantage of this machine is the condition of the processing bowl: the machine was newly coated directly by the manufacturer RÖSLER. The coating is therefore in very good condition. The machine has been carefully maintained and overall gives a very well-kept impression. Depending on the abrasive media and process used, the system is suitable for deburring, rounding, smoothing, cleaning, and surface finishing of workpieces. Thanks to its robust industrial design, it is designed for professional use in production, metalworking, and surface treatment. The machine is offered including control cabinet/control system and the components shown in the pictures. The control system, drive, and mechanical components are functioning perfectly. The machine is ready for use and fully functional. Condition & Features: * Manufacturer: RÖSLER * Industrial vibratory finishing/rotary vibrating system * Fully functional * Processing bowl newly coated by the manufacturer RÖSLER * Very good technical condition * Well-maintained overall optical condition * Robust industrial design * Including control cabinet/control system * Separation/screening zone and discharge chute available * The machine is currently secured for transport on a pallet * On-site inspection possible by appointment Nsdpjz D Sn Njfx Akiewn * Selling price: €14,500 net plus statutory VAT.

Condition: excellent (used), Year of construction: 2018, Walter Trowal CF 200 Useful volume of the working container: 125 l Filling quantity of ceramic grinding media: 200 kg Filling quantity of grinding media: 150 kg Nwjdpfx Akez N Ti Hjijn Max. drive power: 4 kW Speed: 1,000 – 1,500 rpm Static fundamental load: 9,600 N Dynamic fundamental load: 14,700 N

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,895 h, functionality: fully functional, machine/vehicle number: 121-02396, total height: 2,200 mm, overall weight: 4,000 kg, total length: 2,500 mm, total width: 2,000 mm, input voltage: 400 V, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Drum diameter: approx. 1,450 mm MACHINE DETAILS Njdszu Ix Uopfx Akiewn Input voltage: 400 V Input frequency: 50 Hz Input current: 9 A Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,200 mm Total weight: 4,000 kg Operating hours: 9,895 h

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 21137, tank capacity: 50 l, usable tank capacity: 36 l, input voltage: 230 V, inner dimension width: 280 mm, inner dimension length: 600 mm, COMPLETE ORIGINAL DESCRIPTION IN THE IMAGE GALLERY Mobile Vibratory Finishing Machine EUROTEC TV25-M – Vibratory Deburring System with Noise Protection For sale is a mobile vibratory finishing machine, EUROTEC TV25-M, in a compact design. This machine is ideal for deburring, rounding edges, smoothing, cleaning, and polishing various workpieces. Technical data: Manufacturer: EUROTEC Innovation Model: TV25-M (TV25 compact) Mobile vibratory finishing machine with complete noise protection enclosure Gross volume: approx. 50 liters Net volume: approx. 36 liters Connected power: 0.5 kW Operation via 230 V (Plug & Play) Working container: approx. 600 × 280 mm Electronic control with timer Frequency converter integrated Integrated process water treatment Process water feed pump 3-stage process water cascade (70 liters) Automatic shutdown after processing time expires Highly wear-resistant polyurethane lining Integrated scraping edge Very quiet operation due to complete noise protection enclosure Equipment: - Automatic compound dosing unit (TV25-M ACD5) - Partition module for dividing the working container (TV25 TW-G) for simultaneous processing of multiple batches - 3 stainless steel sieve boxes (TV25-M Skxx) - Various grinding media (ceramic and plastic): more detailed description see images Advantages: - Complete system on a chassis – ready for immediate use - Compact design - Easy operation - Ideal for small and medium-sized series - Uniform and reproducible processing results - Robust industrial quality The machine is in excellent condition and has been used only a few times. It has been used exclusively in a professional setting. Nwedpfxezktcqs Akien New price as of 15.03.2023: €19,885.53 net

Condition: ready for operation (used), functionality: fully functional, WALTHER TROWAL Type 650 incl. noise protection cover / centrifuge / control cabinet & platform -Drum diameter 1600mm Nwedez N S I Uopfx Akijn -Coating in good condition -Rotational speed 1450 rpm -Timer -Control cabinet -Centrifuge -Noise protection cover -Work platform -Power 11 KW Errors and omissions excepted.

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available Njdpez Ny Rksfx Akiswn • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report • Original operating manual available • Invoices available • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Condition: excellent (used), Year of construction: 2022, Useful volume of the working container: 100 l Payload: 250 kg Filling quantity of grinding media: 150 kg Weight of the working container: 74 kg Nwodpsz N Tnvjfx Akien Max. drive power: 1.5 kW Speed: 2-30 rpm Material thickness of the rubber lining: 8 mm

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Nwodpozqnxtjfx Akijn Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: ready for operation (used), ROSLER BELT GRINDING SYSTEM - Infeed unit - 2 belt grinding troughs - Discharge conveyor - Control system - Filtration system - Centrifuge - Sound-insulated enclosure Nodpjz Nqvkefx Akijwn - Dust extraction filtration system Further information is available under "Visit Auction".

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Polishing machine, TROMA Model T 60-1 - Capacity: 60 liters - Stepless speed control via frequency inverter - Trough diameter: 680 mm - Overall height: 750 mm - Drive power: 1.1 kW - Drain valve - Total weight: 110 kg Nwjdpfxezzqa Is Akien Errors and omissions excepted.