Used Vdf 250 for sale (10,521)

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Gjdpfx Abez Rnrroiobw Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Year of construction: 1997, condition: used, Specification Gedpfxezw D I Re Abijbw Data Manufacturer VDF Boehringer Model VDF 250 Cm Year 1997 Serial No. 1114.3705-24 Machine type CNC turning center / CNC lathe Control Siemens Sinumerik 840C Design Slant-bed Tailstock No Swing over bed 550 mm Swing over cross slide 480 mm Maximum turning length 1,000 mm X-axis travel 405 mm Z-axis travel 1,099 mm Spindle bore 103 mm Spindle nose Size 8, DIN 55026 Front spindle bearing Ø 150 mm Maximum chuck Ø 315 mm Spindle power 53 kW (50% duty) Maximum spindle torque 780 Nm Spindle speed 30–3,000 rpm* Turret 12 positions Tool interface VDI 50, DIN 69880 Rapid traverse X/Z 10 m/min Maximum feed rate 10,000 mm/min Maximum feed force 15 kN Dimensions L × W × H approx. 5,400 × 3,200 × 2,400 mm Machine weight approx. 11,000 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, Used CNC turning machine Gbjdpfez Anv Nsx Abijw Manufacturer: Böhringer Type: VDF 250 Cm Year of manufacture: 1997 with accessories.

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: VDF Boehringer Type: V800 Year of manufacture: 1974 Machine type: Lead and draw spindle lathe WORKING AREA Turning length: approx. 1,200 mm Center height above bed: 430 mm Turning diameter above bed: 660 mm Center height above carriage: 260 mm Turning diameter above carriage: 520 mm SPINDLE Spindle speed: 7.1–1,400 min⁻¹ Spindle bore: approx. 140 mm MACHINE DETAILS Dimensions (L × W × H): 4,000 × 2,000 × 1,800 mm Weight: 5,000 kg EQUIPMENT Multifix tool holder Godj Ad Hgtepfx Abiebw 3-jaw chuck, diameter 600 mm

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS SWING Gjdpfj Ad Hchsx Abiebw Swing length: approx. 1,200 mm Center height above bed: 240 mm Swing diameter above bed: 480 mm Center height above tailstock: 150 mm Swing diameter above tailstock: 300 mm SPINDLE Spindle speed: 140–1,800 min⁻¹ Spindle bore: approx. 38 mm MACHINE DETAILS MACHINE DATA Machine type: Lead and feed screw lathe Manufacturer: VDF Boehringer DIMENSIONS AND WEIGHT Length: 3,500 mm Width: 1,000 mm Height: 1,600 mm Weight: 1,000 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 225, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, overall weight: 7,000 kg, controller model: Mori Seiki MSC-501, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time on November 26, 2026! TECHNICAL DETAILS Travel distance, X-axis: approx. 220 mm Travel distance, Z-axis: approx. 600 mm Turret Number of turrets: 2 Tool positions, turret 1: 8 Tool positions, disc turret: 12 MACHINE DETAILS Control: Mori Seiki MSC-501 Electrical data Operating voltage: 400 V Frequency: 50 Hz Rated current: 138 A Connected load: 49 kVA Gods Akdmijpfx Abiobw Machine data Machine number: 225 Dimensions: 4,000 x 2,000 x 2,500 mm Weight: 7,000 kg EQUIPMENT 2 turrets Powered tool positions

Condition: used, shaft length: 700 mm, disc diameter: 400 mm, throat depth: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Wavelength: 700 mm Disc diameter: Ø 400 mm Overhang: approx. 400 mm Material: chrome-plated steel, stainless steel 1.4552 MACHINE DETAILS Main drive Motor power: 36 kW Voltage: 380/660 V Hydraulic unit Motor power: 1.0 kW Voltage: 400 V Gbjdpfxs Ai R E Ho Abijw Dimensions and weight Footprint: 2.6 x 1.6 m Overall height: 2.2 m Weight: 2,000 kg EQUIPMENT Hydraulic lifting device Hydraulic unit Control cabinet (as is)

Condition: used, Year of construction: 1996, machine/vehicle number: B 205, overall weight: 2,600 kg, tank capacity: 250 l, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dryer Type: continuous paddle dryer (flash dryer) Gross volume: approx. 250 l Trough diameter: 400 mm Inlet diameter: 100 mm Outlet: approx. 190 x 100 mm MACHINE DETAILS Drive Gedps Akchijfx Abiebw Motor power: 15 kW Voltage: 380 V Dimensions and weight Space required: 3.8 x 1.7 m Overall height: 1.5 m Weight: 2,600 kg EQUIPMENT Double jacket Mounted on a frame

Condition: used, Year of construction: 2006, overall weight: 920 kg, tank capacity: 250 l, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting and tilting device Type: KH-300 container emptying station Material: Stainless steel 1.4301 (304) Containers Type: C-250 Quantity: 2 Capacity: 250 l Diameter: Ø 800 mm Material: Stainless steel 1.4301 (304) Metering Vibratory feeder: Type MDRD-120 Scale: 15 kg MACHINE DETAILS Motor power: 0.55 kW Voltage: 230/400 V Dimensions and weight Space requirement: 2.1 x 2.0 m Overall height: 2.1 m Weight: 920 kg EQUIPMENT Lifting and tilting device 2 containers Metering with vibratory feeder Scale Control cabinet Mobile Mounted on a frame Gjdpfx Ae Ai Nt Sjbisbw

Condition: used, Year of construction: 1975, overall weight: 1,750 kg, tank capacity: 250 l, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mixing container Capacity: 250 l Container dimensions: Ø 700 x 750 mm Cleaning flap: 500 x 300 mm Outlet: Ø 120 mm Material: Stainless steel Gbedpfx As Ai Tk Ajbijw MACHINE DETAILS Motor power: 18.5 kW Voltage: 380 V Motor speed: 725 rpm Dimensions and weight Footprint: 2.7 x 1.7 m Overall height: 2.3 m Weight: 1,750 kg EQUIPMENT Double jacket Stuffing box packings Top connections Cleaning flap Control cabinet (as is) Mounted on a frame

Condition: used, turret of a Boehringer lathe Gbodpfxon Sulmo Abijw

Condition: used, Year of construction: 1970, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 63 t Stroke: 250 mm Travel: 8–100 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight: approx. 3.5 t Table and ram Table depth: 710 mm Gbedpe Aa Nahjfx Abisw Table width: 500 mm Ram dimensions: 450 × 280 mm Ram adjustment: 63 mm EQUIPMENT No information available regarding accessories.

Condition: used, Year of construction: 1984, serial number 1113-23 turning length 500 mm turning diameter 220 mm Gedpfx Ajvxltusbisbw chip conveyor ja kW Werkzeugwechsler 12-fach spindle turning speed range 5000 U/min tail stock automatisch

Condition: used, Year of construction: 1977, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: fully automatic bandsaw machine Machine weight: approx. 1.2 t Cutting Range Cutting diameter: 250 mm Saw blade length: 450 mm Cutting speed: 50 / 70 / 100 / 135 strokes/min Performance Data Total power requirement: 3.8 kW Dimensions Gjdpfs Aaz Nbsx Abiebw Length: 2.6 m Width: 1.8 m Height: 1.1 m EQUIPMENT Fully automatic operation

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, overall weight: 11,000 kg, turning diameter max. 480 mm turning length max. 1.000 mm control Fanuc 15 TFB swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 3000 rpm gear ratio 2 power capacity - main spindel 53 kW spindle nose 11 DIN 55026 Godpfxjz Hmwks Abisbw chuck diameter 315 mm spindle bore 103 mm rapid traverse 10 m/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 11 t dimensions of the machine ca. 6 x 3,5 x 3,0 m The machine was in working order when taken out of service and put into storage; loading is possible. Must move in short time

Condition: used, Technical Details Maximum turning diameter: 345 mm Turning length: 3,000 mm Control system: Sinumerik 805 Siemens Swinging diameter over bed: 570 mm Maximum swinging diameter over cross slide: 365 mm Main spindle: Speed range - main spindle: 3 - 2,500 min⁻¹ Number of speeds: 2 Gbedj Akd Iyspfx Abiew Drive power - main spindle: 15 / 21 kW Maximum torque: 2,000 Nm Spindle diameter in front bearing: (100) mm Spindle bore: (62) mm Spindle head: DIN 55027 No. 8 Travel distances: Cross slide travel: 345 mm Top slide travel: 125 mm Tailstock: Quill diameter: 80 mm Tailstock arbor: MK 5 Quill stroke: 190 mm Feeds: Maximum longitudinal feed: 10 m/min Maximum cross feed: 5 m/min Threading device: Thread pitch: 0.1 - 400 mm Total power requirement: 40 kVA Machine weight: approx. 5.6 t Space requirement: approx. 6.0 x 2.5 x 2.0 m Accessories Documentation Coolant system Tailstock Various tool holders Steady rest 30 - 365mm Steady rest 25 - 160mm

Condition: used, Year of construction: 1971, turning diameter over bed 820 mm turning diameter over slide rest 575 mm turning length 1.500 mm turning diameter in the gap 1.040 mm center height over bed 400 mm centre distance 1.600 mm bed width 560 mm spindle taper KK 11 CAMLOCK DIN 55022 spindle bore 128 mm workpiece weight 2.800 kg 3-jaw-chuck diameter 400 mm turning speed range 5,6 – 1120 U/min power requirement 18,5 kW taper in tailstock-quill MK 6 dia. of quill 100 mm quill stroke 240 mm voltage 400 V total power requirement 20,0 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 4,30 x 1,50 x 1,50 m Coolant Tank 1,80 x 1,10 x 0,20 m - Serial-No.: 1049.2007.07 - Powered top support - RÖHM 3-jaw wedge-type chuck - Quick-change tool holder - Quick-action drill chuck, Ø 1–13 mm - Coolant system - Machine light Gbedj Ahry Ejpfx Abijw

Condition: used, BOEHRINGER / VDF NV 250 T is a CNC vertical turning machine designed for precision machining, high accuracy and reliability. Total axes 4; spindle hole 65 mm; travels Z 260 mm, X 760 mm, Y ±50 mm; rapid traverse X 120 m/min, Z 40 m/min; turret 12 positions VDI 40/DIN 69880. Spindle head A6; stepless up to 4500 t/min; spindle power 31 kW; voltage 50 Hz 3x 400 V; machine weight approx. 8500 kg. Equipment: 3-jaw chuck Ø250 mm with automatic centering, lamp, coolant system, oil mist extractor, automatic loading/unloading unit. Achieves tight tolerances; typical for automotive, aerospace, medical and machine tool sectors Gbsdpj Adzhlofx Abijw

Condition: used, Year of construction: 1996, turning diameter 250 mm turning length 1000 mm Control Philips CNC-Steuerung weight of the machine ca. 8 t PHILIPS CNC control X-axis: 295 mm / Y-axis: 295 mm Center distance: 1000 mm Max. diameter on the bed: Ø 310 mm Gedpfjyan R Ajx Abiobw Max. diameter when turning: Ø 250 mm. Maximum turning speed: 4500 rpm. Spindle bore diameter: Ø 78 mm Turret with 8 tools Weight: approx. 8 tons

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Gjdpfx Aoy U Nqnebijbw

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter over bed slide: 480 mm, controller model: Siemens 840D, TECHNICAL DETAILS Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm Gbodpfxozwmztj Abiow C-axis: yes C-axis speed range: 0–20 rpm Number of tools: 12 Driven tools: 6 Spindle bore: 103 mm Main spindle head size: 8 MACHINE DETAILS Control system: Siemens 840D Main drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50 % Speed range: 30–3,000 rpm EQUIPMENT Forkardt 3 NHF 315-82 A8 power chuck with centrifugal force compensation and hard, ground-in top jaws Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Maximum bar diameter: 63 mm Including draw tube and mounting for power chuck

Year of construction: 1991, condition: used, Offered for sale is a robust universal CNC lathe. Turning length: 3000mm, max. torque: 2240Nm, spindle speed range: 16-2500rpm, feed rate: 0.001-9999.999mm/min, rapid traverse rate: 10000mm/min, feed force: 15kN, tailstock quill force: max. 15kN, control: FANUC 15 TF. Equipped with hydraulic tailstock, drum turret, steady rest (range 72-220mm and 28-120mm), various spare parts, defects: machine bed worn, X-axis bearing arrangement makes noise. Weight: approx. 8500kg, overall dimensions X/Y/Z: approx. 6500mm/2200mm/2000mm. Inspection possible by appointment. Godpszzdx Rofx Abijbw

Condition: excellent (used), Year of construction: 1985, Control: Philips B2T Swinging diameter: 640 mm Machining diameter, longitudinal: 550 mm Gjdpfx Abo Adl N Tjisbw Machining diameter on the turret: 450 mm Turning length: 1000 mm Spindle speed: 2,240 rpm Spindle bore: 103 mm 12-position turret, VDI 60 Chip conveyor

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 57 mm, swing diameter over cross slide: 365 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, bed width: 360 mm, total length: 5,000 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 1,600 kg, travel distance cross slide: 345 mm, overall weight: 5,000 kg, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, The VDF Boehringer DUS 560 Ti is, in terms of turning diameter, the most popular teach-in lathe from VDF Boehringer. With a standard chuck size of 315mm or larger, these machines offer optimal machining efficiency for single-piece and small batch production. This machine is currently set up in our showroom and can be viewed on site! Gbjdpfx Asyvuhzebisw Comes as standard with: - Original documentation - Set of tool holders + drill chuck - Fixed steady rest - 3-jaw Forkardt 315-F Ø315mm chuck Weight & dimensions: - 5,500 kg - 5,000 x 2,100 x 2,000 mm (LxWxH) For all specifications of this machine, please see the last images!

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 710 mm, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 128 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 2 m/min, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, total height: 2,250 mm, total length: 5,800 mm, total width: 2,005 mm, quill travel distance: 280 mm, quill diameter: 125 mm, swing diameter over cross slide: 710 mm, torque: 4,260 Nm, overall weight: 10,100 kg, Equipment: documentation/manual, - Swing diameter over bed: 1000 mm - Swing diameter over cross slide: 710 mm Gbodpfjya Dz Dsx Abiow - Feed rate in X, Z axes: 0.01–50 mm/rev - Feed speed in X/Z axes: 5/2.5 m/min - Rapid traverse in X/Z axes: 10/5 m/min - Feed force in X/Z axes: 20,000/12,500 N - Constant cutting speed: 1–9999 m/min - Distance between centers: 3300 mm - Faceplate diameter: 900 mm - 3-jaw chuck diameter: 500 mm - Bed width: 560 mm - Cross slide travel: 540 mm - Top slide travel: 250 mm - Metric thread pitch: 0.1–400 mm - Spindle nose: KK 11 DIN 55027 - Number of motor gear stages: 2 - Spindle speed range (first gear): 6.3–360 rpm - Spindle speed range (second gear): 28–1600 rpm - Spindle bearing diameter (front): 170 mm - Spindle bore diameter: 128 mm - Spindle internal taper: 136 metric - Tailstock quill diameter: 125 mm - Tailstock quill stroke: 280 mm - Tailstock quill internal taper: Morse 6 (MK6) - Cross slide dimensions (L x W): 1005 x 320 mm - Top slide width: 200 mm - Tool cross-section per DIN 770: 40 x 25 mm - Main drive power (60%/100% duty): 46/37 kW - Main drive torque (60%/100% duty): 5300/4260 Nm - Total power requirement: 60 kVA - Power supply: 400 V - Control cabinet dimensions (L x W x H): 1800 x 500 x 1600 mm - Machine dimensions (L x W x H): 5800 x 2005 x 2250 mm - Machine weight: approx. 10,100 kg CNC controller: SIEMENS SINUMERIK - Toolholder: MULTIFIX type D - AC servo drives - Reliable stepless AC main drive - Work area lighting