Used veneer splicing machines for sale (31)

Condition: used, Year of construction: 1995, Max. veneer thickness: 3.0 mm Fslhcdjzkh S Hjwwegg Gluing system: glue application roller with roller heating Disc: Yes, for transporting the veneer across the veneer table. Machine type: stationary Feed rate: 5 - 15 m/min Feed type: stepless Stand overhang: 950 mm Working height or feed table height: 940 mm Description: The glue is applied from below; the outer side of the veneer is always visible, with automatic thickness and tolerance compensation. Approximate weight: 400 kg Dimensions: 1700 x 900 x 1550 mm Motor power: 0.8 kW Storage location: Nattheim

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Fgjljxgqmxjhcdwweg Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: used, Year of construction: 1997, Arm reach: 920 mm Feed rate: approx. 15 m/min. Veneer thickness: approx. 0.4 - 2 mm Compressed air connection required Storage location: Nattheim Fslhcdwoy H Hgkewjgg

Condition: used, Year of construction: 1995, Stand-outreach: 630 mm, table model. Veneer thickness: 0.4 - 2.0 mm. Feed rate: approx. 7 m/min. Operating voltage: 230 V. Dimensions: 880 x 370 x 480 mm. Weight: 35 kg. Storage location: Nattheim. Fgelhcdwsy Hry Neweg

Condition: good (used), Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Fgslsxtat Uohcdwwog Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Fgolhszuz Hfscdwweg Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Fjlhox Upgcocdwwsgg

Condition: used, No. 04482 Veneer splicing machine Haug FZZ 95 Used For joint-tight splicing of veneer from approx. 150 mm length, 35 mm width and 0.3 - 3 mm thickness The glue line comes from below Automatic thickness and tolerance compensation Infinitely variable throughput speed of 10 - 45 m/min Zig-zag or serpentine line of the glue line Electrical connection 0.8 kW, 240 V Stand projection 950 mm Infinitely variable material feed 5 - 15 m/min Transport dimensions approx. 1550 x 750 x 1340 mm LWH Weight approx. 265 kg Sale on behalf of the customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Fgslhcdew Id S Sswweg Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Fgjlog Nn E Nshcdwwog Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: like new (used), functionality: fully functional, glue thread sewing machine zigzag stitching pedal control arm clearance 650 mm 230V power supply Fgelhcdozz N Hyewwjg

Condition: excellent (used), functionality: fully functional, glue thread sealer zigzag stitching clearance 630 mm heating element temperature adjustment foot pedal control power supply 230V year of manufacture 2001 CE marking Fgolhcdwozz N Htewsg

Condition: used, Kuper wire joining machine, model FWJ 920, complete with CE certificate and operating and maintenance manuals. Fgolezmhpdshcdwwog

Condition: good (used), Code: 0240 Brand: KUPER Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 900 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Fjlhcdwoyxmrwowegg Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300

Condition: used, functionality: fully functional, Kuper FW/J 920 Veneer Joining Machine Fslhceznzbpsdwwjgg Thread-and-glue joining machine Working width 920mm Working height 0.4-2mm Feed rate 15m/min Heated element with air blower Zigzag stitching Motor power 0.18kW Year of manufacture 2002 Air consumption 10l/min Dimensions 1280x560x1470mmH Weight 166kg

Condition: used, Year of construction: 2019, functionality: fully functional, KUPER FWS 1250 Veneer splicing machine for sale! Currently in production, available in January 2027. For joining veneers approximately 0.3–3.0 mm thick. The machine applies a special glue thread in a zigzag pattern, providing strong and tight joints even with wavy veneers. During pressing, the glue thread is embedded into the veneer, eliminating the need for additional sanding. Technical data: Throat depth: 1250 mm Feed speeds: 15 / 30 / 45 / 60 m/min Veneer thickness: 0.3–3.0 mm Fgelszu Auqehcdwwsg Voltage: 400 V, 50 Hz, 3-phase Compressed air connection: R 1/4" Air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA

Condition: like new (used), Thread splicer with glue Zigzag stitching Folhjzq D I Decdwwogg Heater with air blowing Pedal control 380V power supply

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R 3. Scissor lift INCLUDED Veneer specifications Veneer strip length (grain direction) 350 - 2100 mm Veneer strip width (cross grain) 50 - 500 mm Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Compressed air 6 bar Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Fgslhey Tpb Rocdwwog Dimensions and weight (Basic machine) Length 3500 mm Width 1500 mm Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). Folst Akcfjhcdwwjgg 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer cross-gluing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Felhsumrf Ascdwwjgg Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Compressed air 6 bar Glue types PVA or UREA based

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Fgoloyayumshcdwwjg Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: used, Year of construction: 2003, machine/vehicle number: 4303/0442, type of input current: three-phase, input voltage: 400 V, empty load weight: 2,000 kg, Equipment: CE marking, For sale The Kuper FLI 1000 (manufactured in 2003) is an industrial veneer joining machine. It is valued in the woodworking industry for its precise and durable edge-to-edge veneer joining using resin adhesive, eliminating the need for glue beads. Key specifications and parameters: - Joining method: Edge-to-edge, using resin adhesive applied to the edges. - Throat depth: 1000 mm. - Veneer thickness: from 0.3 mm to 2.5 mm. - Veneer length: from 500 mm. - Minimum veneer strip width: 45 mm. - Heating system: Provides uniform pressure and rapid adhesive curing while maintaining high efficiency. Required space Length: 2.3 m Fslezmtk Tohcdwwogg Required space Width: 2 m Required space Height: 1.5 m

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, For sale: Ludy Machinery veneer joining machine with winding function. This machine is designed for efficient joining and stacking of veneer strips into a roll. Suitable for processing veneer in the production of plywood, laminated materials, and other woodworking applications. Robust construction, simple operation, and reduced material handling. Felhcdozg Dx Iewwjgg

Condition: like new (used), Year of construction: 2019, operating hours: 1,800 h, functionality: fully functional, machine/vehicle number: 142400, A powerful and reliable machine for industrial veneer processing. Robust construction, precise operation, and a suitable solution for operations that prioritize efficiency and consistent performance. The CrossRunner 1600/2500 model offers a working width of 1600 mm and a length of 2500 mm. Suitable for professional production and daily operation. Fgslhcozg Dl Uodwwog

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Fgolhcdwovwfaxjwsg

Condition: used, used manufactured by Kuper type Mini 420 range 420 mm thread heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - Fslhsvwf Dwecdwwegg without guarantee and guarantee