Kuper veneer splicing machine

Kuper FW/ 1200-E

Condition: excellent (used), Year of construction: 2006, I sell the veneer splicer Kuper FW-1200E. Kfodjwg Ty Rspfx Aa Esa Very good condition. Available immediately.

Condition: new, Year of construction: 2025, operating hours: 10 h, Engine: CUMMINS - US EPA Tier 4 final, water-cooled, with electrically heated water separator with 24V fuel pre-filter and air filter pre-cleaner - Diesel particulate filter (DPF) - Eco-switch for diesel engine - Cooling fan with reversing function for cleaning the radiators Ksdpfx Ajwb Dnzja Ejfa - Automatic central lubrication for attachment and slewing ring raceway - Pinion-tooth lubrication for slewing ring - Emergency control to ensure machine availability during restricted operation By bypassing the main functions - Joystick steering Undercarriage Mobile undercarriage with 4-point support. All-wheel drive Solid rubber tires 12.00-20 (8-way). Cabin Adjustment Cabin adjustment TYPE 270 for SENNEBOGEN MAXCAB. Hydraulically liftable up to approx. 2.7 m Cabin and Equipment MAXCAB Industrial with sliding door including a one-piece, straight windshield with armored glass. Armored glass cab roof window Cab protective grille at the front and top Automatic climate control Air-suspended comfort driver's seat with climate control, seat heating, and headrest Fully adjustable multifunctional armrests for the driver's seat 2-inch safety belt Radio/USB/MP3 and Bluetooth function Position slewing gear brake Interior sunshade for roof hatch and windshield Uppercarriage options Additional counterweight 0.6 t SENNEBOGEN Hydro Clean filter Safety railing Platform next to the cab with railing (bolted) Railing on the uppercarriage, foldable for transport Work equipment Type K18 transfer equipment consisting of: Compact boom 10.1 m and stick 7.9 m Lift and stick cylinders with end-of-stroke damping Hose rupture protection for lift and stick cylinders Limit switches for lifting/lowering and boom on/off Boom damper reduces sway and dampens abrupt movements. SENNEBOGEN 20 kW, 230 V generator system for diesel machines, 100% duty cycle, maintenance-free Safety circuit against short circuits and overloads, insulation monitoring 4-pole generator, hydraulically driven, can be switched off when not in generator mode without hydraulic power loss, control and display unit in the cab. Basic lighting package: Two H4 recessed headlights in the upper frame at the front left and right, two taillights and two headlights at the front left integrated in the cab roof. LED work light with magnetic attachment and 5 m cable for flexible positioning in the maintenance area. Camera system - Basic package with 2 cameras includes: 1 7" color monitor with 4-way split screen, expandable to a maximum of 4 cameras, 2 color cameras with a 115° field of view for the rear view camera and the right side of the machine. Additional lighting package 1: One spotlight mounted on the uppercarriage One LED work light Additional lighting package 2: Two LED spotlights on a pole Two LED spotlights on the boom One LED spotlight on the counterweight Rotating beacon

Condition: good (used), Width: 700 mm Length: 2000 mm Panel thickness: 40 mm Kfjdpfsvitclex Aa Eoa Height: 850 mm

Condition: excellent (used), Year of construction: 1999, 1. Milling Head Debarker Baljer Zembrod - Year of manufacture 1999 - Heavy-duty cross conveyor for round timber, 4-strand - Debarking carriage - Milling head - Planing head for clean finishing - Root reducer Kfodowtpmgjpfx Aa Eja - Operator cabin - Rails - Discharge boxes

Condition: excellent (used), Year of construction: 1988, utomatic wide belt sander with 2 belts for varnish, wood, veneer, composite materials and various materials Technical data: Working width mm 1350 Max useful height mm 130 Belt size mm 2450 x 1350 Composition: 1° Group: Sanding roller diameter mm 320 - sh. 60 - Blowers cleaning belts - Motor Kw 11 with speed variator 2° Group: Sanding roller diameter mm 320 - sh. 40 - Blowers cleaning belts - Motor Kw 11 with speed variator Scotch brite - Motor Kw 1,5 Kfjdpjgmbu Iofx Aa Esa Vacuum table - Motor Kw 5,5 Feed belt speed variator 4/19 mt/min Operating pressure 7 Bar equipped with Abrasive belts series Overall dimensions: machine mm 2000 x 2700 x 2500 vacuum pump mm 800 x 700 x 900 h

Condition: new, Year of construction: 2021, Press brake Bernardo AKPL 1600 x 40 Technical data: Pressure force: 40 to bending length: 1600 mm distance between stand:1200mm Kfedpfx Ajftuywsa Esa stroke length: 100 mm Backgauge: 0 - 500 mm Projection: 200 mm table width: 150 mm table height: 760 mm Forward speed: 60 mm/sec Bending speed: 8 mm/sec Return speed: 60 mm/sec. oil tank: 130 litres Engine power: 4,0 kW width: 2050 mm depth: 1800mm height: 2030mm Weight ca.3030 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 9,738 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: Fanuc 31 iB, table width: 600 mm, table length: 1,200 mm, table load: 500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 18 W, number of slots in tool magazine: 48, Manufacturer Matsuura Model VX-1000 Year 2016 Control Fanuc 31iB Data: Table size 1200 x 600 mm Kodpewtfu Hefx Aa Eefa Table load 500 kg Traverses X/Y/Z 1020/610/610 mm Rapids X,Y/Z 40,40/36 m/min. Spindle taper ISO 40 Spindle drive motor 18,5/15 kW AC Spindle speeds 40 – 15000 rpm Tool taper BT-40 Big plus Tool magazine positions 48 station Tool diameter with/without adjacent tools 96/150 mm Tool length 350 mm Tool weight 10 kg Machine dimension LxWxH 2,52 x 2,85 x 3,4 m Machine Weight 8.000 kg Equipment: Chip conveyor, coolant through the spindle 20 bar, 8 extra M-Functions, Renishaw Probe OMP 60, Tool breakage control.

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Kfedpfxsvvkfde Aa Esa

Condition: excellent (used), power: 115 kW (156.36 HP), fuel type: diesel, color: green, Year of construction: 2021, operating hours: 4,800 h, General information Year of manufacture: 2021 Field of application: Construction Serial number: 818.0.2803 Technical information Number of cylinders: 4 Empty weight: 19.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Other information Emissions class: Stage V Additional information Please contact Ferdinand Pater for more information Stock no. D28 Machine Brand Sennebogen Type: 818ME-series Weight: 19 Ton Serial number: 818.0.2803 Building year: 2021 Worked hours: 4700 Engine: Cummins QSB 4.5 Stage V 115kW at 2200rpm Boom: K9 ULM, 5.3 meter boom, 3.8 meter grab stick with ULM Cabin: Maxcab, Hydraulic Cab Riser, 2,7 m. Upper carriage: Standard Sennebogen color, complete new spray paint, Central greasing system Undercarriage: Mobile, 8 full rubber tires 10,00-20 with 4 outriggers Lights: Several (LED) lights on boom, stick and cabin Kedpfjt Dlulex Aa Eefa Extra: Machine is serviced and clean, ready for work

Condition: like new (used), Year of construction: 1996, Retrofitted: 2025 Kfjdpfowfunysx Aa Eea Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 6000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mmY axis traverse: 3800 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm (direct exit)Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) Direct spindleTool clamping system: HydraulicTaper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-96872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 50000 KgMaximum weight on table: 15000 kgMachine dimensions approximate: 14740 x 5330 x 5050 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceHead changer: automatic with lateral hinge/support in columnChip conveyor: 2 longitudinal palletsElectronic handwheel: New HR-510Coolant: External Internal high pressure through spindle (internal only with direct exit head) Sales conditions Guarantee: 6 months mechanical spare partsSale conditions and price: On request View all technical features