Used Veneer splicing machines for sale (37)

Condition: ready for operation (used), Year of construction: 2000, Cross veneer splicing machine / Veneer cross splicing machine manufactured by Fisher Rückle Cgeb E D Iveva Ulpslet Type DELTA FZX-28 complete with intermediate conveyor, edge processing unit, stacking device with lifting table Veneer strip length up to max. 2800 mm Veneer strip thickness approx. 0.4 - 1.5 mm (depending on the veneer) Veneer strip widths approx. 70 - 600 mm (across the grain) Glue types based on urea or PVAC This machine makes it possible to join veneer sheets crosswise with glue (Pvac or Urea). It is necessary that the veneer sheets are pre-glued. The machine guarantees excellent joints of any type of veneer. The gluing is carried out by a system of hydraulic cylinders with horizontal pressure, which allows the veneer sheets to be joined without gaps along the entire length. The heavy and robust construction of the machine guarantees a long service life and reliable operation. Operation of the machine is simple and intuitive thanks to a clearly laid out control panel. Separate pressure gauges give the operator direct access to the pressures of the heating plates, the horizontal pressing system, etc. as well as short changeover times. The upper cross beam of the machine is raised to allow easy and quick access to the heating plates for cleaning and maintenance. The machine is checked when ordered and delivered with warranty.

Condition: ready for operation (used), Kuper FWJ900 With glue thread, well-maintained condition Max. veneer thickness 2 mm, min. 0.4 mm Control via foot pedal Stand model, feed speed 7 mm, Cgeb Eovrk Sio D Ivlst Projection 900 mm, weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, type of input current: three-phase, working width: 2,700 mm, For sale Fisher Ruckle machine in good working condition with the following characteristics: -maximum working width 2700mm. -veneer thickness 0.8-3.2 mm. -automatically adjustable working speed. -year of manufacture 2003. -used 4 years. Cob E D Ivjwbf Nyslegt The equipment is complete and consists of: -left milling and glue application machine. -right milling and glue application machine. -alignment conveyors. -jointing machine.

Condition: good (used), Functionality: fully functional, Column projection 630mm feed approx. 7m/min with substructure Incl. glue spools Dimensions: 1050 x 460 x 1200mm L x W x H Ceb E D Ijumwm Eovlogt Weight approx. 110kg

Condition: good (used), Year of construction: 1998, Functionality: fully functional, The KUPER FLI is a veneer gluing and joining machine, designed to join high-quality veneers with precision. Key features of the KUPER FLI: Power supply: 400/230 V, 3 Ph + N + PE, 50/60 Hz. Ceb E D Ievntpcsvlegt Total consumption: approx. 4.1 kVA (requires 16 A fuse). Air consumption: 5 NL/min. at 6 bar.

Condition: excellent (used), Veneer splicing machine Cjb Eetq Ey To D Ivljgt Model : KUPER FWJ 920 In very good condition.

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Year 2007. Cobsvxvc He E D Ivlsgt Very good condition. Available immediately.

Condition: used, Kuper FW 630 Mini The ideal machine for small veneer quantities with the technical advantages of all KUPER zig-zag gluing machines: Discus disks with tolerance compensation mechanism. The gluing medium is a KUPER special glue thread. The glue thread is automatically applied in a zig-zag line and guarantees tight and firm joint connection. The glue line is applied during pressing inwards during pressing, which means that the adhesive does not need to be sanded off. is no longer necessary. Technical data: Stand design 630 mm Veneer thickness approx. 0.4 - 2.0 mm Feed rate approx. 7 m/min Operating voltage 230 V, 50 Hz/60 Hz Total connected load 110 VA Space requirement 1050×905 mm = 0.95 m² Total height 475 mm Cgeb E D Iebi I Apovlot Net weight 95 kg Gross weight 110 kg always 10 pieces in stock FW 420 FW 630 FW 920

Condition: used, Casati Z650 Wire Splicer Cob E D Ieqqu A Rovlogt

Condition: used, Year of construction: 2006, Functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Cgsb Eoumrgas D Ivlet Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Tape (paper) width 6 mm Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Roll (width) 65 mm Tape running meter 3200 m Electric energy 1,1 kW Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: used, Year of construction: 2013, Functionality: fully functional, Fisher+Rueckle FZR-24 Veneer crossfeed splicing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Cob E D Ivsumrf Aslegt Compressed air 6 bar Glue types PVAc or UREA based

Condition: used, Year of construction: 2009, Functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg Stacking device DA-2200 Veneer format length (longitudinal to the fibre) 600 * - 1500 mm Veneer format width (transverse to the fibre) 500 * - 2200 mm Maximum stacking width for output on the - right-hand side 2200 mm - left-hand side 2200 mm - back 1500 mm Cgeb E Dot Akcfj Ivlot Stacking height max. 500 mm Power consumption from FZR-15 Weight 1200 kg Lifting table 2500 mm L x 1200 mm W. 1000 kg