Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested Ncedpfxex N A Aae Amnot – Working width: 1300 mm – Cross sanding unit with belt blowing device – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC controlled - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Location: ex stock 54634 Bitburg - Immediately available - Free loaded

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Njdpfx Amoy H N Tmjnect Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 1989, With sanding units consisting of: - 1 calibration roller - 1 combination unit with rigid pad Used Manufacturer: SCM Model: UNO C-CS Year of manufacture: 1989 Machine no.: AE005036 REF.: 030514 Sanding width: approx. 920 mm Pass-through height: approx. 3-160 mm Number of units: 2 pcs., 1x15 kW Units from above: 2 pcs Ncedsy H N Taopfx Amnot Belt dimensions (L x W): 1525 x 930 mm 2x feed speed: 4.5 / 9.0 m/min 1 pc calibration roller - grooved / rubber-coated 1 pc combination unit with rigid sanding pad - rubber-coated roller Extraction connection: D 2 x 160 mm Required space: approx. 1600 x 1500 x 1800 mm Weight: approx. 1200 kg Location: 97447 Gerolzhofen, free loaded, unpacked Transfer in as-is condition as inspected, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 1996, Bütfering Classic 213 CE Wide Belt Sander Sanding width 1300 mm Tolerance-accurate calibration with the contact roller Sanding of solid wood Sanding of veneered workpieces with both Njdoy Tu Suepfx Amnsct articulated pressure beams Sanding belt width mm 1370 Sanding belt length mm 1900 Extraction capacity m³/h 3650/4500 min./max. mm 3-150 Compressed air connection bar 6-8 Total connected load kW 24 Air consumption l/min 20 Weight kg 3300 1. Unit Type C, combined contact roller sanding head with: - Steel contact roller, profiled. - Electronically controlled articulated sanding shoe, element width 50 mm - Motor power 11 kW 2. Unit Type E - Sanding shoe unit - Electronically controlled articulated pressure beam, element width 25 mm - Motor power 11 kW - Infinitely variable sanding belt speed from 2 to 18 m/s via frequency inverter - Forward and reverse operation - Belt blowing device Transport carpet with infinitely variable feed rate 2.5 - 13 m/min Control of the extraction slides Roller tables at the infeed and outfeed Workpiece cleaning: Rotating cleaning brush 0.75 kW Machine tested for functionality Price 12,500.- Year of manufacture 1996

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WEBER KSF-3-1350 (CMC) Fine/Cross Sanding Machine with 3 sanding belts for premium fine, veneer, and high-gloss sanding. Featuring a constant working height and configured as follows: Machine Frame Heavy-duty welded steel construction designed to accommodate 3 sanding units and workpiece cleaning components, such as workpiece air cleaning. Electrical control cabinet integrated into the frame. - Constant infeed height of 900 mm - Control and sanding belt change side is left in feed direction - Heavy-duty height adjustment via spindle lift gearing - High-quality transport table with conveyor belt - Stepless feed speed from 3–18 m/min, frequency controlled - Vacuum conveyor version with one vacuum blower, 5.5 kW, with a vacuum channel extending up to the machine’s upper edge - Safety systems compliant with CE standards - Electrical equipment conforms to VDE - Doors on both sides of the machine; on the belt change side with safety interlocks and sight window for monitoring belt oscillation - With one infeed and outfeed table with rubber-coated rollers Unit 1: Sanding units engineered for double-shift operation. - Belt run-off switches connected to oscillation monitoring on wide belts - Automatic sanding belt length compensation - Non-contact optical belt detection, self-cleaning, on belt change side - Oscillation adjustment on belt change side - Wear-free DC braking - Extraction hoods with optimal airflow to maintain TRK levels Unit 1: Cross-sanding unit with - Pressure lamella belt with felt and graphite for extended service life - ISD segmented pressure beam system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blow-off unit Unit 2: CBF Combi Unit with - Grooved rubber contact roller, Ø 130 mm, rubber hardness 60 Shore - Cross-running lamella belt with separate 4.0 kW drive - ISA segmented pressure beam system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotation) - Workpiece-controlled oscillating sanding belt blow-off unit Unit 3: Cross-sanding unit with - Pressure lamella belt with felt and graphite for extended service life - ISD segmented pressure beam system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blow-off unit Control Control terminal: 'SIEMENS' MP 377 12" multi-panel - Graphical operator guidance via 12" color display - Program memory for 300 programs - Parameter setting via program - WANDRES Micro-Cleaning (single-brush version) Power sword brush with integrated micro-moistening of the linear brush (for optimal lacquer dust removal) Technical Specifications: Working width: 1350 mm Drive unit 1 (frequency controlled, Eco-Drive): 15 kW Drive unit 2 (frequency controlled, Eco-Drive): 20 kW Drive unit 3 (frequency controlled, Eco-Drive): 15 kW CBF drive: 3 kW Vacuum blower: 5.5 kW Feed drive (frequency controlled): 3.0 kW Height adjustment (frequency controlled): 3 kW Sanding belt speeds (frequency controlled): approx. 3–20 m/s Cross-belt dimensions (W x L): 2x150x5100 mm Wide belt dimension (W x L): 1370 x 2620 mm Workpiece thickness (min./max.): 4–140 mm Ncedpfjy A D Eijx Amnet

Condition: used, Year of construction: 2000, Working width .- mm With 1 sanding unit consisting of:- combination unit with electronic shoe for lacquer sanding- lacquer sanding- dust brush- roller table at infeed 270 mm- program control electronic f. 50 programswith brand-new feed carpetusedmake Bütferingtype Classic 111 Cyear of construction 2000machineNo. 63608Working width 1100 mmPassage height 160 mmCE type-testedGS wood dust testedBelt dimensions 1120 mm x 1900 mmFeed speed 4 8 m/min.1 piece combi unit 3.7/7.5 15 kW , 3 belt speeds with autom. steel rollerdiameter 130 mmbelt speed approx. 4,5 9 18 m/selectronic link shoesegment pitch 50 mmfor lacquer sanding workpiece controlledstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Ncedpfx Amevwfl Uonjt

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian manufacture - year of manufacture: 2007 - combination sanding shoe TECHNICAL SPECIFICATIONS: - sanding width: 950 mm - sanding height: 4–170 mm - motor power: 11 kW - 1st unit: steel drum with pneumatic engagement - drum diameter: 110 mm - 2nd unit: combination sanding shoe - pneumatic engagement for rubber drum: 78 Shore - shoe with pneumatic adjustment - pneumatic oscillation Ncjdpfx Amoxdxfqonst - air blast for belts - electric height adjustment - two belt speeds: 8.3 m/s and 16 m/s - electronic sanding height positioning - continuously variable feed speed: 4–20 m/min - minimum material length: 500 mm - extraction nozzle diameter: 2 x 140 mm - machine dimensions (L/W/H): 150 x 180 x 210 cm - weight: ~ 1010 kg

Condition: good (used), Year of construction: 2002, Brand: MABO Nedpfx Amopitqmsnjct Type: Participate Machine no: 76 Year of manufacture: 2002 - Long belt sander with electric raising/lowering of the work table, sanding shoe Tech info: Work table 2000x800mm Sanding belt dimension 6060x150mm 2 speeds on the sanding belt Size for transport: Length: 320 cm Width: 130 cm Height: 160 cm Stock no: 2001159BXM

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Ncedjrbyrpopfx Amnet Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 With sanding shoe in good condition Driven left and right Tech. info: Work table size: 2200x800 mm Wheel diameter: 250 mm Band width: 150 mm Belt length: 6200 mm Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Nedpeth R Tlofx Amnect Size for transport: 320x110x145 cm Stock no: 2002056

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, power: 5.65 kW (7.68 HP), table length: 2,780 mm, table width: 1,000 mm, Johannsen belt sander with electric height adjustment, table size 2780x1000 mm Nodpfxox Rbvho Amnsct

Condition: used, RWT BSO 400P Belt Sander Sanding width: 400 mm 1 unit (rubber roller) Sanding pad Motor: 5.5 kW Ncsdpfx Aey Rrc Somnst Two feed speeds Electric table adjustment Table position display Oscillation Abrasive belt air cleaning The sander is fully ready for operation.

Condition: excellent (used), Table length: 250 cm, Table width: 100 cm, Motor: 4.2 kW, Electric table lifting, Angles in the table Nedpfx Aoyi Hyhjmnect

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, power: 1.5 kW (2.04 HP), input frequency: 50 Hz, We are offering this used Hog Maschinen ABRADE MASTER PRO bevel and edge rounding grinding machine, year of manufacture 2009. Year of manufacture: 2009 Rated voltage: 400 V Frequency: 50 Hz Main motor rated power: 1.5 kW Main motor rated current: 16 A Secondary motor rated power: 0.12 kW Bevel and edge rounding grinding machine Variable adjustable bevel 0-12 mm Rounding 2-15 mm radius Including feed and stand Description: Belt drive electrically powered, oscillation can be switched on as needed. Feed with 4 speeds. Extraction connection Nodpfx Amsy Ir H Ssnect Compressed air connection for belt cleaning If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, Code: 0354 Brand: JET/USA Model: DDS 225 - CE Standard Automatic 2-roller calibrating sanding machine for wood, furniture, joinery, custom made furniture, panels, wooden joinery, plastics and various materials – CE Standard Features: Sturdy construction Outfeed roller adjustment independent of the infeed roller Hard rubber coating on the rollers 2-speed conveyor belt Working width 635 mm Min workpiece length 230 mm Min workpiece height 0,8 mm Max workpiece height 133 mm Roller dimensions 152 x 635 mm Roller rotation speed 1400 rpm Conveyor belt speed 2–3 mt/min 2 suction inlets diameter 100 mm each Power output 5 Hp Enclosed base with door Abrasive belt 80 gr Abrasive belt 100 gr Overall dimensions mm 1150 x 1150 x 1050 h Weight kg 330 Nedpfjy A Synex Amnoct

Condition: good (used), Code: 0351 Brand: VOLPATO Model: LS - 1N - CE Standard Automatic edge sanding machine for edges and profiles in wood, solid wood, veneer, painted and various materials - CE Standard Technical data Max working height mm 110 Min working length mm 100 Variable-speed belt feed 5–30 m/min – Motor Kw 1,5 Tilting oscillating sanding unit – 2-speed motor 700–1400 rpm – Power 2 Hp Pneumatic belt tensioner – Timed entry and exit of the pad Mechanical oscillation of abrasive belt 0/20 mm Lifting and tilting via handwheel with special key Removable support for large panels Abrasive belt dimensions 80 x 2450 mm Suction inlet diameter 100 mm Compressed air 5–6 atm Overall dimensions mm 2600 x 1400 x 1500 h Nedpfxsy A Sq Tj Amnsct Weight kg 720

Condition: good (used), Code: 0098 Ncsdoy Au Diopfx Amnjt Brand: MINIMAX SCM Model: LS 3000 - CE Standard Belt sanding machine with double goose neck - with 3 motors - CE Standard Table length mm 3000 Table width mm 1100 Automatic table lifting stroke mm 580 2-speeds belt motor Sanding belt lenght mm 8100 Pulleys diameter mm 250 Belt width mm 150 Manual pad mm 150 Gooseneck depth mm 820 Overall dimensions: mm 4150 x 1500 x 1600 h Weight kg 485

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS Ncedpfjy E Iycox Amnet - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: ready for operation (used), Year of construction: 1972, Disc diameter: 600 mm Nodpsvkdqiofx Amnect Grinding table size: 670 x 280 mm Grinding table swivels up/down: 30/45° Grinding disc drive motor: 1.5 kW Space required: 870 x 650 x 1280 mm including extraction SZ 1, 380 V, 1.5 kW

Condition: excellent (used), Year of construction: 1983, Johannsen Long Belt Sander T 82 - K Pneuma - Air-cushioned sanding pad - Max. workpiece length: 2800 mm - Table width: 950 mm - 5.5 kW main motor - 2.2 kW fan motor - Sanding belt width: 160 mm - Extraction connection diameter: 180 mm - Right/left rotation - Handwheel adjustment - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight approx. 1000 kg Location: ex stock Saarland Ncsdpfx Aoxpmtyjmnst - immediately available -

Condition: good (used), Radii from 2 mm to 12.5 mm. Expandable up to 25 mm. 45° bevels up to 16 mm wide. Workpiece support extendable up to 380 mm. Optional feed system available. You will receive an invoice with VAT shown separately. Price applies ex stock Haldensleben. Ncedpfxsw Sw Syj Amnot

Condition: used, machine/vehicle number: 006385, Max. machining width: 1000 mm Min. machining thickness: 3 mm Njdpfey Nktmox Amnoct Working Table: Fixed pass height No. Operating units: 2 Nr

Condition: used, machine/vehicle number: 007613, Max. machining width: 1300 mm Min. machining thickness: 3 mm Working Table: adjustable Vacuum feed belt: yes Ncjdjx A Tagepfx Amnjt No. Operating units: 3 Nr

Condition: used, machine/vehicle number: 008201, Max. machining width: 1300 mm Min. machining thickness: 200 mm Working Table: adjustable Vacuum feed belt: yes Ncedpfx Amexmgyhsnet No. Operating units: 3 Nr

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: AE700472 Ref: 111810, 1350m/m Wide Belt Sander with 3 Sanding Rollers Calibrating and Sanding machine In very good condition. Electronic Control Unit. Capacity 1350m/m wide. Very good HP. With at least 5 boxes of Cloth Backed Sanding Belts 40/60 & 80 Grit. Price of STG £15,000.00 Includes loading buyers transport. Location: Burrowbridge, Somerset TA7 0SG UK Photos available on WhatsApp Njdpfx Amst Iwgusnoct