Used Running Rails for sale (13,919)

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: KA27 - 14/796736, ABUS overhead crane, crane runway, bridge crane, indoor crane, crane Payload / lifting capacity 1.6t – 1600kg Span 9550mm, external dimension approx. 9700mm Year of manufacture 1998 with pendant control Lifting height 6m Hoist GM816 L06 Overall height top of crane to hook approx. 710mm (320mm beam + 390mm hoist) End carriage length without buffers approx. 220cm Kjdjwzrtxspfx Aldenb Optionally, two running rails 2x 40m HEA240 are available. Crane is disassembled and immediately available Very good condition, inspection logbook available Pillar jib cranes and wall-mounted jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please inquire with postal code Collection preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: DN-ELV3200KG, Kone crane, overhead crane, bridge crane, industrial crane Hoisting mechanism with 0.3 full load hours = only 7 operating hours on the meter!!!!! Load capacity / lifting capacity 3.2t - 3,200KG Gauge 13600mm, overall dimension approx. 13800mm Year of manufacture 2000 Lifting height 6m Kodpszv Du Iofx Aldonb Overall height from top of crane to hook approx. 1050mm Head beam length with buffer approx. 2450mm With floor control Crane is disassembled and immediately available Very good condition, see pictures Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: NOH336-41, ABUS ELV overhead crane, crane runway, bridge crane, workshop crane Load capacity / lifting capacity: 5t - 5000kg Span: 12,990 mm, outer dimension approx. 13,250 mm Ksdpfxsx Azrds Aldonb Year of manufacture: 2005 with radio remote control Lifting height: 6 m Construction height (top of crane to hook): approx. 850 mm Main girder length incl. buffers: approx. 260 cm Crane is dismantled and immediately available Very good condition, inspection logbook available Column-mounted and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please inquire with postcode Collection preferred

Condition: used, Suspension crane runway Crane system made of aluminum system profile similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA No DEMAG but similar to KBK Overhead monorail system with single girder crane bridge Light crane system made of aluminum system profiles Load capacity: 125 kg Span: 3.2 meters as single girder bridge Profile height: 155 mm Profile width: 100 mm - Natural anodized aluminium profiles - Carriage with smooth-running plastic rollers - Power supply via trailing cable on the wire rope Consisting of: 2 pieces of 4.8 meter aluminum system profile for the longitudinal track with 3 suspension eyelets each 1 piece of 3.35 meter aluminum system profile for the crossbeam (single girder bridge) with 2 suspension eyelets 1 trolley for crane suspension on the crossbeam 1 carriage on the longitudinal beams (2 pieces) 6 end covers suitable for the profile rails Knodpfsuch Rfex Aldob Weight of profile rails: 125 kg Very good condition, as good as new Hoists can be found in our WebShop under the search term "chain hoist" You can find suitable assembly material in our WebShop under the search term "KBK"

Condition: good (used), indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 13400 mm / 2x 7980 mm -Carrier: IPB 280, HEB 280 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Distribution/Price: in pairs or complete -Weight: 1270/720 kg/piece / 3980 kg total Kedpfxou Inr Aj Aldenb

Condition: good (used), Indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T girders, IPB steel girders -Steel beams: for bridge crane, length 2x 13400 mm / 2x 11000 mm / 2x 7970 mm Ksdpfxsu Inrio Aldenb -Carrier: IPB 340, HEB 340 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Shipping/Price: in pairs or complete -Weight: 1650/1360/950 kg/pc. / 7920 kg total

Condition: used, Crane track rails – steel beams HE-B 300 from an 11-meter long hall Beam width: 300 mm Beam height: 300 mm Middle web: 11 mm Track rail: 50 x 30 mm Beam length: 2 x 10550 mm (total length 21100 mm) Knjdpezinz Ejfx Aldob - A 5-ton crane ran on these crane track rails. - It was installed in a 10-meter hall. - The beams are one-piece, without a butt flange joint. - Consisting of 2 x 10550 mm - White painted Self-weight per meter of crane track rail: 120 kg + 11.7 kg = 131.7 kg/m Self-weight of the crane track rails: approx. 2780 kg

Condition: good (used), indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders Knjdpfju Inr Nsx Aldob -Crane runway: for bridge crane, length 2x 9000 mm -Carrier: IPB 320, HEB 320 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Delivery/Price: complete -Weight: 970 kg/piece / 1940 kg total -Transport dimensions: 9130/600/H380 mm -Weight: 1940 kg/total

Condition: excellent (used), Year of construction: 2018, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: KC1811242, turning diameter over cross slide: 325 mm, turning length: 1,285 mm, turning diameter: 570 mm, spindle bore: 80 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 310 mm, travel distance Z-axis: 1,285 mm, spindle motor power: 7,500 W, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (min.): 1,600 rpm, rotational speed (max.): 40 rpm, total height: 1,700 mm, total length: 3,070 mm, total width: 1,300 mm, quill travel distance: 150 mm, quill diameter: 75 mm, quill stroke: 150 mm, swing diameter over cross slide: 325 mm, turning diameter over bed slide: 570 mm, turning diameter over top slide: 325 mm, type of input current: three-phase, overall weight: 2,560 kg, swing diameter over bed slide: 570 mm, bar passage: 75 mm, chuck outer diameter: 300 mm, swing diameter over top slide: 325 mm, center height: 280 mm, bar diameter (max.): 75 mm, mount diameter: 32 mm, Equipment: documentation/manual, 2018 Dugard Lunan 570MF CNC Lathe – Excellent Condition 📍 Location: Ireland 🔧 Machine Type: CNC Lathe 🛠️ Manufacturer: Dugard 📅 Year of Manufacture: 2018 ⏱️ Machine Hours: Only 2,300 ✅ Condition: Very Good / Fully Functional 💡 Why Choose This Machine? The Dugard Lunan 570MF is a solid, well-built CNC lathe designed for medium to heavy-duty turning applications. With Siemens 828D control, only 2300 working hours, and a complete set of chucks, steadies, and accessories, this machine is ideal for general precision engineering, subcontractors, and educational/training use. It’s well maintained, ready to work, and represents excellent value. Buy a 2018 Dugard Lunan 570MF CNC Lathe in excellent condition. Featuring 570mm swing, Ø80mm spindle bore, 400mm chuck, and 7.5kW power. Available now from Used Machine Tools Ireland. International delivery available. 🧰 Machine Includes: Siemens 828D CNC Control System 320 mm 3-Jaw Chuck 400 mm 4-Jaw Chuck Travelling Steady Fixed Steady Coolant Equipment Tailstock Operator Manuals Selection of Tool Holders & Chuck Jaws 🔹 Technical Specifications Max Swing Diameter Over Bed: Ø570 mm Max Swing Diameter Over Slide: 325 mm Distance Between Centres: 1500 mm Span of X/Z Axis Guide Rails: 420 mm Knedpswv Sx Rofx Aldob Max Turning Length: 1285 mm Center Height: • To Bed: 280 mm • To Ground: 1170 mm Spindle Bore Diameter: Ø80 mm Bar Capacity: Ø75 mm Spindle End Type: D8 Chuck Size: Ø300 mm or Ø400 mm Spindle Speeds: 3-Speed Manual Ranges: • 40–150 rpm • 130–470 rpm • 450–1600 rpm Taper of Spindle: Metric 90, 1:20 Turret: 4-Position Electric Turret Tool Size: 32 × 32 mm Tailstock: • Quill Diameter: Ø75 mm • Stroke: 150 mm • Taper: MT5 End Bracket: Hand-operated type Screw Model: • X-Axis: FFZD2504-3-P3 • Z-Axis: FFZD4008-5-P3 Rapid Traverse (X/Z): 6 / 10 m/min X-Axis Stroke: 310 mm Minimum Set Unit: 0.001 mm Main Motor Power: 7.5 kW Power of Main Supply: 12.5 kW Net Weight: 2560 kg Dimensions (L×W×H): 3070×1300×1700 mm 💡 Features & Benefits: Robust and versatile CNC lathe ideal for medium to heavy-duty turning High-torque spindle and large bore suitable for tough materials Reliable FANUC control system with user-friendly interface Well maintained and fully serviced – ready to run Ideal for sub-contract machine shops, tool rooms, and general precision engineering 🚚 Delivery Options Available We offer nationwide & International delivery Dugard Lunan 570MF CNC Lathe for sale Used Dugard CNC lathe Ireland 2018 Dugard Lunan CNC lathe CNC lathe Ø570mm swing Large bore CNC lathe used Heavy-duty CNC turning lathe CNC lathe with 80mm spindle bore 4-position turret CNC lathe CNC lathe with tailstock and 12.5kW power supply CNC lathe for shaft turning manual turret CNC lathe industrial CNC lathe for metal turning Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Indoor crane, crane, crane runway, crane rails, steel girders, medium-width I-beams, double-T-beams, IPE steel girders with manual trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Beam: IPE 240 Knodpfjfwg Icsx Aldsb -Carrier width: 120 mm -Equipment: 1x IPE steel beam, 1x roller chassis, 2x adjustable stops -Load capacity: 1000 kg -Dimensions: 5H245 mm -Weight: 182 kg

Condition: good (used), Approximately 96m twin track rail system available from closed meat factory. Knodpoq Ii S Ejfx Aldsb

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1915, Oteman Delta P03K Quick automatic fabric spreading machine with spreading table, built 2003 in Igualada (Barcelona). In working order. TECHNICAL DATA Manufacturer: Oteman S.A., Igualada (Barcelona), Spain Model: P03K Quick Serial number: 1915 Year of construction: 2003 Maximum working width: 1,800 mm Maximum load: 80 kg Maximum roll diameter: 600 mm Maximum speed: 2 m/sec Power: 2 kW Voltage: 380 V three-phase Current: 10 A Frequency: 50/60 Hz Kodpfxoz At Sco Aldsnb Machine weight: 498 kg Control: Delta + JT Kombi programmable controller Spreading table: included, with travelling rails Condition: in working order The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Manufacturer / Type Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Design: PROFI crane system as a two-rail gantry with crane bridge Technical data Load capacity: 1,600 kg Crane bridge span: 5,100 mm Support spacing L: 5,570 mm Support spacing B: 5,100 mm Beam length: 5,470 mm Overall dimensions of the system: approx. 6,020 x 5,800 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of gantry beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Trolley / Running gear Type: SiCO-HF 2000 A Variant A Kjdozgrzqopfx Aldsnb Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail gantry crane system Crane bridge Electric chain hoist SIXX8AF Manual trolley SiCO-HF Load hook Control / Operating element Main switch Steel supports and beam structure Documentation / Inspection certificate available Accessories as shown in the pictures Areas of application Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Weight Total weight of the system is approximately 2,000 to 3,500 kg, depending on experience, depending on the installed steel profiles, foundation plates and equipment variants. Condition Used. System was installed and in operation. Optical condition as shown in the pictures. Inspection certificate and documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF Support and beam structure Control / Operating elements Documentation / Inspection certificate Accessories as shown in the pictures Subject to changes and errors in the technical data and specifications. Subject to prior sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: OTT-110-015457, operating hours: 12 h, ABUS ELV overhead crane, crane system, bridge crane, hall crane, crane 4 units available!!! 3x manufactured in 2011 (9-14 operating hours) / 1x manufactured in 2016 (50 operating hours) Load capacity / lifting capacity: 3.2t - 3,200KG Track gauge: 9485mm, overall width approx. 9600mm Manufactured in 2011/2016 with floor control Lifting height: 6m Overall height from top of crane to hook approx. 590mm (girder 320mm + lifting mechanism 270mm) Head girder length with buffer approx. 2350mm SWP: only 12.3 full-load operating hours used!!! Remaining service life: 1587.7 full-load operating hours! Crane is disassembled and available immediately. Running rails available upon request. Very good condition - almost like new, inspection certificate available. Column-slewing cranes and wall-slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Knedpfx Alszund Djdsb Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Kjdsz D D N Ejpfx Aldjnb Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Condition: excellent (used), 3.0 m for load capacities of up to 3 tonnes per metre of rail or 600 kg per roller, roller diameter 125 mm with roller bearings, overall height approx. 140 mm 7.9 m for load capacities up to 1.8 tonnes per metre of rail, support rollers Ø 80 mm running on stainless steel tubes spaced at intervals of just 50 mm, overall height 105 mm Kjdpfx Asyzyf Asldonb 11.1 m for load capacities up to 2 tonnes per metre of rail, cast support rollers Ø 65 mm spaced at intervals of 60 mm, overall height approx. 80 mm

Condition: used, maximum load weight: 12,000 kg, overall weight: 16,000 kg, first registration: 01/2009, loading space length: 8,690 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,590 mm, total height: 2,750 mm, Year of construction: 2009, Vehicle No. G0106558_1 - Manufacturer: Krone. * Floor: Aluminum floor * Simple corner fittings * Electrical cable for refrigeration unit * Rear door design: Rear portal doors * Refrigeration unit * Portal door with simple espagnolette locks (external) * Support legs fixed * Locking bars on rear doors: 2 * Tie-down rails Kodpfez A Rthsx Aldenb New leak test. Rear portal/portal door with simple espagnolette locks/external made of stainless steel. Storage container wind and weatherproof, lockable, floor in good condition, no further repairs. Delivery time: IMMEDIATELY. Technically ready for use without further repairs. Test run down to -18°C OK! Substructure with signs of wear. UVV applicable. Mobile refrigerated storage unit. Dimensions are approximate. Offer subject to change without notice and prior sale. Prices net ex location, D-59302 Oelde. Further details are available by phone or email:

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable, Cover Equipment: - Manual hand pump - V-drawbar - 10x lashing eyes Net: €8,382.35 / Gross: €9,975.00 Article number: FBA227401921.11 Technical data: • Brand: Vezeko • Model: Husky Car FB 27.39 • Vehicle type: Lowering trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 394 x 187 x 210 cm • External dimensions (LxWxH): 553 x 254 x 264 cm • Loading height of the floor: 44 cm • Permissible total weight: 2,700 kg • Unladen weight: 705 kg • Payload: 1,995 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • 15mm multiplex floor panel, made of birch wood, with anti-slip coating - extremely robust • Side panels made of anodized, double-walled aluminum profile 10cm • Insertion options at all corners for e.g. tarpaulin frame • Cover incl. spar frame. Internal height: 210cm, color: black • Very stable steel frame welded • Frame completely hot-dip galvanized • Many stable cross members, resulting in high point load capacity • Loading area hydraulically lowerable, license plate holder at the rear, can be swiveled away for loading • Mechanical safety lock of the pivoting axle during operation • With over-run protection at the rear • Additional longitudinal struts continuously welded in • Tool box at the front • 10 lashing eyes within the V-loading rail, rubber-coated, tensile force (750DaN/kg) • ALKO overrun device and parking brake • Coupling head ALKO • Very stable V-drawbar REINFORCED • Reverse automatic • 13-pin connector • Reversing light • Large-sized safety lighting Knsdszy At Rjpfx Aldsb • Integrated rear fog light • Rear position lights in LED • Lighting recessed in the rear frame • Support wheel with clamping bracket in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery nationwide possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, measuring range X-axis: 440 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 410 mm, workpiece weight (max.): 227 kg, total height: 2,320 mm, type of input current: AC, total width: 1,160 mm, total length: 1,030 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, overall weight: 293 kg, input voltage: 220 V, table height: 930 mm, travel speed (max.): 21,000 mm/min, repeat accuracy: 0.003 mm, table load: 227 kg, compressed air connection: 4 bar, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, TESA MH3D DCC coordinate measuring machine (CMM) for sale in very good, well-maintained condition and ready for immediate use. Features: PC-DEMIS Pro for Windows Version 4.2 MR4 Release software (legally transferable) Current calibration and maintenance performed on 09/09/2025 Renishaw MH20i / TP-ES probing system Includes several probe extensions and accessories Including EM1 extension exchange module, L=70 mm (new price 07/2025: €1,255 net) 1x TP20 SF probe module (standard probing force) 1x TP20 EF probe module (high probing force for long probe combinations) Functional HP computer included Calibration and measurement records available Operating manual on CD Additional, functional Renishaw Brown & Sharpe TP-ES probe head Original TESA Star-i probe head (defective) Additional Renishaw MIP probe head (probably defective) Various styli included (see pictures) Condition: Granite table in very good condition Axes run smoothly and precisely No problems with the air bearings Machine has been regularly serviced Ksdoy Taixepfx Aldonb Used only in a metrology laboratory Immediately ready for production and measurement Typical wear marks present on one side of the guide rail; purely cosmetic and without any technical restrictions Air bearings run smoothly, without jolts, and precisely Calibration is current and within specification Inspection and functional demonstration possible by arrangement. Suitable for quality assurance, incoming goods inspection, manufacturing metrology, toolmaking, CNC machining, or metrology service providers.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2380 500KG, ABUS Lightweight Portal Crane / Gantry Crane Type: LPK Load capacity/lifting capacity: 500 kg Crane girder/steel structure consisting of IPE200 beam / square tube 140x140, standing on 4 heavy-duty swivel casters (200 mm) with 500 kg ABUS GM chain hoist with trolley drive Overall height approx. 4.92 m Width approx. 7 m Bottom edge of running rail approx. 4.65 cm Depth approx. 200 cm Hook height approx. 4.2 m Crane is disassembled and immediately available. Kodszvrg Sjpfx Aldsnb The item is located in 75053 Gondelsheim. Very good condition, almost like new. See pictures. Shipping by freight forwarder or collection only by prior arrangement.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Efficient and precise cutting with high ease of operation thanks to the electromotive adjustment of the main saw blade (height/angle) and the parallel fence. Powerful motor, speed up to 5,000 rpm, scoring saw speed up to 8,000 rpm. Double roller carriage, the heart of the panel saw, smooth-running and durable. Cutting length max. 3,200 mm Safe operation thanks to proven safety devices. Equipment: Machine frame: Torsionally rigid and self-supporting guarantees the necessary smooth running and stability Control: PLC control Electromotive height adjustment and tilt 0-45° for the main and scoring saw blade via push and hold button. Saw unit: Powerful motors for excellent cutting performance Drive power/speed of the main saw spindle with automatic brake Main saw motor 7 kW, speed adjustment by switching over the drive belt, speeds 5,000 / 4,000 / 3,000 rpm Speed of the scoring saw 8,000 rpm Quick-change system for the main saw blade Saw blade angle is displayed numerically Double roller carriage: Linear, round guide rails ensure a precise and durable system with high-quality cutting results and a long service life Small rollers inside the carriage guarantee smooth sliding during cutting incl. upper carriage locking Carriage length 3,200 mm Parallel fence: max. width 1,250 mm with electromotive adjustment removable fence High-quality work table made of robust sheet steel guarantees high rigidity Safety zone starts approx. 200 mm in front of the saw blade Crosscut fence: Cross position of the panel is displayed numerically with telescopic device for cuts up to 3,100 mm and 90° guarantee Robust, gap-free flap units are easy to move Fence ruler is removable Cutting to length on the crosscut fence on the sliding carriage 3 digital displays with fine adjustment for high repeatability Display up to max. 3,200 mm Extraction: to prevent flying chips and dust protects the operator from hazards Table extension and table widening Design: Clamping shoe, sliding stick, sliding and return handle Miter stop for manual mounting on the sliding carriage Technical data: Main saw: Saw blade diameter 400 mm, speed 3,000/4,000/5,000 rpm, motor 7 kW S1 Scoring saw: Saw blade diameter 120 mm, speed 8,000 rpm, motor 0.75 kW S1 Saw blade tilt 0-45° Max. cutting depth at 45°: 85 mm Max. cutting depth at 90°: 125 mm Parallel fence: max. 1,250 mm Sliding carriage: 3,200 x 418 mm Max. cutting capacity: 3,200 mm Height adjustment: electromotive Angle adjustment: electromotive Table size: 1,020 (690+720) mm Extraction: Diameter 100 mm Space requirement: 6,700 x 3,900 x 1,890 mm CE marking in accordance with EU directives including documentation and maintenance instructions Saw blades are not included in the scope of delivery. Knjdpfx Aloz Dwftsdjb

Condition: used, maximum load weight: 11,320 kg, overall weight: 16,000 kg, first registration: 01/2014, loading space length: 7,240 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 42 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2014, Vehicle No. G0119516_1 – Manufacturer: Krone. Kjdoz A Rkgepfx Aldjnb * Rail code * Floor: Aluminum floor * Double-deck system * Simple corner fittings * Outline marking on side/rear * Refrigeration unit * Load certificate Code-XL * Portal door with simple twist-lock fasteners (exterior) * Forklift accessible * Front wall niche * Telescopic support legs * Temperature recorder * Temperature recorder * System for rail loading * ATP test – new * Leak test – new * Double-deck equipment without double-deck load beams (available at extra cost!). Financing upon request. Financing possible. Flat fuel tank 60 L / Note: Flat tank extends the box!. Krone Telematics Cool W: Location monitoring, door monitoring, refrigeration temperature monitoring, and refrigeration unit monitoring can be activated at Krone for an extra charge. Delivery time: IMMEDIATELY AVAILABLE. Newly painted. Oil service – new. Solar panel for monitoring start-up voltage – new. Technically ready for use; body and support legs newly painted. Temperature recorder / DATACOLD incl. printer. Temperature recorder test – new. Test run to -18° C – OK!. Undercarriage (KTL) cleaned and treated with underbody protection. Valid safety inspection (UVV). UVV documentation available. PAINT – NEW!!!. LASI CODE XL!!!. Mobile refrigeration storage. Dimensions are approximate. Offer subject to change; sale is reserved. Prices are net ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Kjdow Ixz Uspfx Aldsnb Hook height: approx. 4.3m Crane gauge: approx. 10.8m Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, side door Equipment: - Ramp/door combination - Supports - Aero Poly body Net price: €17,126.05 / Gross price: €20,380.00 Knsdpfxszy Dpae Aldjb Article number: BVB235501920.01 Technical data: • Brand: Brian James • Model: Box Van 600 • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 509 x 193 x 201 cm • External dimensions (LxWxH): 689 x 243 x 259 cm • Loading height of the floor: 44 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,190 kg • Payload: 2,310 kg • Chassis: Low-loader (wheels next to the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Black body made of high-quality, fiberglass-reinforced plastic. Lightweight yet extremely stable • Daylight roof running along the entire length of the trailer • 12-inch aluminum rims - black/silver • Handling handles at the front and rear • Side doors on the front left and right, lockable • Full-height and full-width rear tailgate with locking • Innovative door-ramp combination with extremely easy operation via the door latch: can be used as a hinged door, a ramp, or a combination of both. • Both ramps at the rear can also be individually switched to serve as a door. • Internal height 2010 mm - Entry height at the rear 1990 mm • Recessed lashing rail on the left, right, and in the middle of the floor • Numerous lashing points offer flexible lashing options • Lashing rail mounted on the left and right on the side wall • Very stable steel frame welded • Frame completely hot-dip galvanized • Spare wheel with bracket mounted • Very stable V-drawbar REINFORCED • ALKO overrun device and parking brake • Reverse assist • Steel cast coupling head with integrated high-security lock ALKO • Plastic mudguards • Rear supports at the rear on both sides with clamping bracket • 13-pole plug • Reversing light • LED interior lights recessed in the roof with solar panel • Large-sized LED safety lighting • Integrated rear fog light • Various marker lights at the front, side and rear • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to inquire about any specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT. - Vehicle registration document can be sent in advance, or a transport license plate (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale exceptions apply -

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: MIKA110-Kran152-33?, DEMAG KBK overhead crane, dimensions approx. 8.8 x 3 m Payload / lifting capacity: 1 x 50 kg at the suction lifter Technical data of the system: Overhead crane track 8 x 3 m, made of Demag KBK2 rails Height of steel structure: 4 m Top of steel structure (purlin): 4 m Bottom of steel structure (purlin): 3.72 m Bottom of crane running rail: 3.35 m Bottom of bridge: 3 m Width: approx. 3.1 m Lifting height of suction lifter: approx. 30-220 cm External dimensions of steel structure (space requirement): 9.3 x 3.1 m Support spacing: 8.85 m Dimensions of overhead crane track: approx. 8 x 3 m The system will be delivered complete: KBK rails, rail connectors Carriages, end plates, cable carrier, brackets/hangers, etc. + complete steel structure (IPE180 + square tube 150x150 mm) Kodezv Ib Sspfx Aldenb Incl. vacuum pump with Palamatic vacuum tube lifter 3, capacity 50 kg The system is disassembled and packed on a pallet Item location is 75053 Gondelsheim Very good condition - almost new. See pictures. Shipping by freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails are in stock!