Condition: excellent (used), functionality: fully functional, Vertongen M-300 Combi Throughfeed Sander Working width: 300 mm Working height: up to 200 mm Combi unit with pad Pneumatic oscillation Fpjdpfxeyn Aqao Ag Dod Manual raising and lowering of the work table Two feed speeds Main motor: 5.5 kW Abrasive belt: 300x1900 mm Weight: approx. 600 kg

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,300 mm, workpiece height (max.): 140 mm, controller model: Xinje XD5, empty load weight: 4,500 kg, working length: 200 mm, TECHNICAL DETAILS 1st Station: 15 cup grinding brushes with quick-change mount 2nd Station: 15 cup grinding brushes with quick-change mount 3rd Station: 9 tangentially arranged grinding brushes 4th Station: Crosswise roller with grinding brushes over the entire working width 5th Station: Crosswise roller with grinding brushes over the entire working width 6th Station: Air nozzle across the entire working width Working width: 1,300 mm Working length: 200 mm Workpiece height: 3 - 140 mm MACHINE DETAILS Control system: Xinje XD5 Total power requirement: 13.4 kW Fpjdpfx Agjx Tt Uuo Dod Dimensions & Weight Required floor space: approx. 5.1 x 2 x 2.3 m Machine weight: approx. 4,500 kg EQUIPMENT Modular control of the module units Frequency converter for speed control Automatic adjustment of working height range Oscillating blowing air in the final section Easy maintenance and replacement of abrasive paper and brushes Spare brushes Grinding inserts Rubber conveyor belt with herringbone pattern, solid steel plate underneath across full width

Condition: excellent (used), CATALOG NUMBER 7612 Technical specifications: - Max. workpiece width: 1030 mm - Max. workpiece height: 150 mm From above: - Metal pressure roller - Split metal pressure roller - Unit (profiled rubber calibrating roller + pad + metal roller) - Smooth rubber idler roller From below: - Infeed roller - Feed belt - Outfeed idler roller - Pneumatically oscillating belts with photocells - Electric table height adjustment - 2 feed rates - Main motor: 11 kW - Brake - Handwheel for precise sanding height adjustment - Feed motor: 0.33 kW - Table lifting motor: 0.12 kW - Operating pressure: 8 bar - Extraction port diameter: 150 mm Fjdpfeylbmnex Ag Depd - Dimensions (L/W/H): 1500 x 1750 x 2000 mm - Weight: 965 kg ADVANTAGES - German made - Original paint - Used sander in very good condition Net price: 28,900 PLN Net price: 6,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change if there are significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2002, functionality: fully functional, Veneer sanding unit, 4 kW, 400 Volt, oscillation, chassis, motor power 2.2 kW, 4-roller feed, Haffner stepless feed, sanding belt 2640 x 150 mm, table 960 x 460 mm, swiveling range 45°-90°, 2 x 100 mm ø extraction ports, length 1800 x 1000 mm, weight 310 kg, good condition. Price ex works. Transport available at extra cost! Fedpfxeyayute Ag Djpd

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, LBK.150 LBK-150 Fsdpfx Asya H Nqjg Djpd LBK004 Worktable extension LBK005 Motor with 2 speeds 700/1400 rpm LBK008 Base for mounting feed unit

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Top sanding and calibrating machine (fine finishing). Also suitable for sanding assembled window frames (semi-open side). Machine with fixed table and height-adjustable sanding unit. • One sanding unit type C (combination unit with roller and mechanically adjustable pad) • Rubber roller diameter 160 mm, 90 Sh • Sanding belt length 1900 mm • 1 straight and 1 beveled pad • Fixed table height, motorized height adjustment of sanding unit (max. sanding thickness 200 mm) • Automatic star-delta starter • Ammeter for sanding unit motor • Infrared sanding belt oscillation • Electronic digital thickness setting display • 2 feed speeds: 4.5 / 9 m/min • Rubber pressure rollers • Pneumatic brake on main motor • Pneumatic tensioning of sanding belt • Soundproof protection Fedjya H E Eepfx Ag Depd

Condition: used, functionality: fully functional, Automatic calibration wide belt sander suitable for calibrating and sanding solid wood. This model belongs to the higher range of automatic wide belt sanders produced by this Italian manufacturer. It is distinguished by its very robust and rigid machine frame and excellent sanding quality. The fixed table height allows for integration into production lines. 2 main units: roller + roller 1. Sanding roller, soft rubber Ø 240 x 440 mm - 9 kW motor 2. Calibration roller, hard rubber Ø 240 x 440 mm - 4.8 - 7.2 kW motor 3. Cleaning brush at the outfeed + rotary pneumatic workpiece blower Sanding width: 350 mm Minimum and maximum workpiece thickness: 3 to 180 mm Minimum workpiece length: 340 mm Feed speed variator Digital LCD thickness display with motorized adjustment Fpedpfeyr Rplox Ag Dod Fine tuning with handwheel Ammeter for motor load display Pneumatic blow-off of sanding belts with oscillation Abrasive belt size: 2620 x 380 mm Pneumatic disengagement of sanding units External control panel Fixed working height / table - lift of the entire unit Price on request. In stock at Telnice near Brno 6-month warranty - warranty and post-warranty service Testing, machine demonstration, and operator training are naturally provided.

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine – warranty – CE certificate TECHNICAL DATA table size 2600x800mm table lift 570mm pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm engine 3kW exhaust port diameter 120mm weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Fpsdpfx Asx S Il Eog Dsd Standard equipment: Electric table height adjustment Extraction nozzle User manual Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7790 TECHNICAL DATA - Max. working width: 1100mm - Max. working height: 170mm - 2 units: - Rubber pressure roller 1) Grooved metal calibration roller - Rubber pressure roller 2) Grooved rubber roller + sanding pad + metal roller - Rubber pressure roller Fpsdpjx S Eb Rofx Ag Dod - Motor power of unit I and II: 11kW - From below: - 3 metal sliding rollers - Conveyor belt - 2 metal sliding rollers - Pneumatic belt oscillation - Electric and manual table lifting (for precise adjustment) - 2 feed speeds - With pneumatic brake - Operating pressure: 8 bar - Extraction port diameter: 2x160mm, 4x100mm - Overall dimensions (L/W/H): 2000x1600x2100mm - Weight: 1170kg ADVANTAGES – Not repainted – Italian manufacture – 2 operating units – DTR documentation – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may change with higher exchange rate fluctuations)

Condition: excellent (used), Catalog number 7838 TECHNICAL DATA - Machining length: 2760 mm - Machining width: 800 mm - Main motor: 4 kW - Sanding belt width: 150 mm - Right/left rotation - Electric table adjustment up/down 0.15 kW - Extraction port diameter: 135 mm, 120 mm - Overall dimensions (L/W/H): 4120x1600x1400 mm - Weight: 500 kg ADVANTAGES – Not repainted – Electric table adjustment Fsdpfox N Tnyox Ag Dspd – Used sander, in perfect condition, very little use Net price: 8,900 PLN Net price: 2,120 EUR based on a rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7850 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 working units: 1) Grooved rubber calibration roller 2) Grooved rubber roller + pneumatic segmented pad + steel roller - Motor power: 15 kW - Brake - From above: - Split, non-slip rubber feed roller - Working unit - Split, non-slip rubber feed roller - Working unit with segmented pad - Split, non-slip, outfeed rubber roller - Cleaning brush - From below: - 2 non-slip steel rollers - Feed belt - 2 non-slip, outfeed steel rollers - Pneumatic belt oscillation controlled by photocell - Electric table height adjustment - 2 feed speeds - Feed motor power: 0.75 kW - Sanding thickness potentiometer - Working pressure: 8–10 bar - Dust extraction port diameter: 3 x 165 mm - Overall dimensions (L/W/H): 1900 x 1700 x 1930 mm - Weight: approx. 1,502 kg ADVANTAGES Fjdpfsx Hhy Sox Ag Dopd – Italian production, SCM brand – 2 working units – Sanding thickness potentiometer – Pneumatic segmented pad – Original paint (not repainted) – Technical documentation (DTR) – Used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 wide belt sander with combination unit Equipped with electronic segmented pressure bar For sanding of soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier boards Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings Sanding of blocking foils With graphical operator terminal NC-controlled thickness adjustment ranging from 3 to 150 mm Calibration roller can be engaged via terminal With patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency controlled, approx. 2–18 m/s Fjdpfxex Rpgho Ag Djpd Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Belt blow-off: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/s Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 1997, functionality: limited functionality, - Oscillation defective Fpsdpfx Ageyi Ug Ae Djd - Main switch replaced - Machine is operational - Sold without warranty

Condition: used, Used machine Year of manufacture: 1981 Features and technical data: Motor 5.2/7.5 kW, pole-changeable Fodsx H U Nmepfx Ag Depd 750/1500 rpm Belt speeds: 11 and 22 m/sec With attached blower motor 2.2 kW (2840 rpm, air flow 2400 m³/h) Table size: 2900 x 1400 mm Usable working length: 2700 mm Table stroke: 320 mm Belt dimensions: 7800 x 150 mm Including pneumatic pressure shoe with belt brake Extraction nozzle: 180 mm Air requirement: 2 l/min at 6 bar Weight: 1300 kg Availability: short notice Location: Röllbach

Year of construction: 1994, condition: used, Used machine Fpedpfxjxq Ua Re Ag Djd Year of manufacture: 1994 Equipment and technical specifications: Working width: 300 mm Sanding belt oscillation: mechanical Roller guide: rubber-coated Sanding unit: with sanding shoe Feed speed: 2-stage Feed direction: reversible (forward/reverse) Motor start: star-delta Power supply: 380 V Weight: approx. 450 kg Availability: short-term Location: Baden-Württemberg

Condition: good (used), Code: 0281 Brand: AGLA GALLI Model: 2 R 130 Automatic 2 roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials N° 2 inclined rollers - Thanks to this inclination, the rotating brushes, by oscillating, ensure a perfect polishing of the surfaces to be treated REVERSE" system , which restrains softens the reverses even with heavy materials like marble, wooden panels, etc. Length of 2 rollers mm 1300 Roller diameter mm 300 Useful working length mm 4300 Useful working width mm 1300 Max panel height mm 120 Motor hp 15 x 2 Working table height from mm 950 to mm 1180 Suction mouth diameter mm 200 Overall dimensions mm 5000 x 2350 x 1750 h Weight kg 2500 Fpedpfx Agex Db Nfe Djd

Condition: excellent (used), CATALOG NUMBER 7773 TECHNICAL DATA - Max width of workpiece: 900mm - Max height of workpiece: 160mm – Top: - Metal pressure roller, slip type I unit – Calibrating rubber grooved roller II unit – 2x Metal calibrating roller + shoe – Bottom: - Feed belt - Pneumatic oscillating belt - Electric table lifting - Main motor 15kW/11kW - Feed motor 1.5kW - Operating pressure 6-8 bar - Dust extraction port diameter 2x200mm - Dimensions (L/W/H): 1850x1950x2040mm - Weight approx. 3000kg ADVANTAGES – Italian manufacture Fpjdsykaxmopfx Ag Djd – Calibrating sander + pad – Used sander, very good condition Net price: 15,900 PLN Net price: 3,780 EUR (at 4.2 EUR exchange rate) (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, grinding belt length: 2,600 mm, grinding belt width: 200 mm, grinding height: 200 mm, power: 2.85 kW (3.87 HP), Edge sander WEGOMA model KS2600/KS2600FU with oscillation. Feature Technical Data Sanding belt dimensions: 2600 x 200 mm Motor power (belt): approx. 2.25 kW Oscillation: electromechanical, can be switched off separately Oscillation motor: approx. 0.25 kW Fsdpfsyhglzex Ag Dopd Belt speed: approx. 15 m/sec Main table size: 935 x 460 mm Auxiliary table: 350 x 300 mm (often at the belt tensioning roller) Swivel range: Aggregates adjustable via hand wheel (0° to 90°) Weight: approx. 260 kg

Condition: ready for operation (used), Year of construction: 1989, grinding belt length: 2,600 mm, grinding belt width: 150 mm, space requirement width: 900 mm, space requirement length: 1,650 mm, Langzauner LZK 3/2 edge sanding machine motor power 2,2kW Belt dimension 2600 x 150 mm Belt speed 20m /sec Table dimensions 1000 x 350 mm Height adjustment 200 mm Weight 300 kg Space requirement 1650 x 900 mm Fpjdpfxsrgpw Aj Ag Dsd Sanding unit 45° tiltable Veneer sanding unit Oscillation Feed console year of construction 1989 Condition: fully functional

Condition: used, Year of construction: 2006, lower grader with 2 lower belts RR 1300 2 lower rollers upper grader with 2 upper belts RR 1300 2 upper rollers Fsdpfxoycxwfe Ag Depd

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2007.10.191, grinding width: 1,350 mm, grinding belt length: 4,800 mm, workpiece height (max.): 150 mm, grinding belt width: 1,400 mm, Sanding Machine + Dust Extraction Unit TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 - 150 mm Transport bed: continuous conveyor belt Transport bed drive: 4.0 kW / frequency converter 7.5 kW Feed speed: 3 – 15 m/min Drive, workpiece suction clamping system: 7.5 kW Units: 3 x cross, 1 x longitudinal, 1 x brush Cross and longitudinal sanding units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt dimensions cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Belt speed longitudinal sanding: 1.8 – 16 m/s Drive power longitudinal sanding: 15 kW Pressure lamella belt dimensions longitudinal sanding: 1,900 x 1,380 mm Brushing unit Brush roller diameter: 120 mm Drive power: 0.75 kW Air requirement Air requirement, cross sanding units: 91.5 m³/min Air requirement, longitudinal sanding unit: 30.5 m³/min Air requirement, brushing system: 18.0 m³/min Air requirement, conveyor belt extraction: 13.5 m³/min Air exhaust, workpiece suction clamping system: 40.0 m³/min Total air requirement: 193.5 m³/min Total compressed air consumption: 115 m³/h MACHINE DETAILS Total connected load: approx. 80 kW Operating voltage: 400 V Frequency: 50 Hz Main machine dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dust Extraction Unit EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air speed: 20 m/s Air requirement: 30.5 m³/min Fpodpfxsyg Exqe Ag Djd Transport bed drive: 1.1 kW / frequency converter 2.2 kW / 0.75 kW Feed speed: 3–15 m/min Fan drive: 5.5 kW Drive, height adjustment: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dust extraction unit EA 8 - Workpiece suction clamping system - Several cross and longitudinal sanding units - Brushing unit

Year of construction: 2004, condition: ready for operation (used), A 5-roller Heesemann wood sanding machine is available. Sanding belt dimensions: 2620 x 1350mm, sanding width: 1300mm, working height: 1000mm, roller diameter: 250mm, belt speed: 24m/s, suction volume: 89.5m³/min, suction nozzle diameter: 250mm + 180mm, air speed: 20m/s. Dimensions X/Y/Z: approx. 5200mm/2300mm/2300mm, weight: approx. 13000kg. Documentation available. On-site inspection is possible. Fodpfxet Amc Uo Ag Dopd

Year of construction: 1977, condition: ready for operation (used), Two identical single wood belt sanding machines Löwer are available. Sanding belt length: 1600mm, sanding belt width: 160mm, working width: 150mm, feed rate: 16m/min, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 1400mm/1000mm/1600mm, weight: approx. 650kg. On-site inspection is possible. Fodpfx Agsx U Dw Ae Dopd

Year of construction: 1990, condition: ready for operation (used), Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible. Fsdpfeuzlg Dox Ag Dspd

Year of construction: 2001, condition: ready for operation (used), Three grinding machines including several mobile extraction units are available. 1) Grinding machine Elektra Beckum TF 904/3.1WNB, year of manufacture: 2001, power: 3.1kW, speed: 8500rpm, grinding wheel diameter inner/outer: 30mm/200mm. 2) Mobile extraction unit Alko Mobil 200, year of manufacture: 2013, air volume flow: 2500m³/h, power: 2.2kW. An on-site inspection is possible. Fpjdpfx Agexph Ryo Ded