Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Equipment and technical data: In intermediate lacquer finish (Cd-L) version. Robust, space-saving 1-wide belt sanding machine for demanding pre- and finish sanding Constant working height thanks to upper part adjustment Working width 1350 mm Top sanding with combi unit entire sanding unit can be inclined up to 10 grooved rubber contact roller in proven hardness contact roller level steplessly adjustable in height according to a sanding grit scale pneumatic lifting/lowering of the contact roller according to unit selection sanding pad with quickly replaceable sliding lining parallel spring-loaded, ground steel pressure roller at the infeed rubberized pressure roller at the outlet belt drive motor 11 KW (1100mm) 15 KW (1350mm),18,5 kW (1600mm) 400 V./50 Hz; with soft start for low power consumption at start-up Motorized, fine adjustable height adjustment with digital display Belt tension, control and oscillation pneumatic, compressed air consumption approx. 2 l/min. Optimum safety thanks to automatic immediate stop with disc brake in case of belt breakage, belt breakage, belt run-out, pressure drop or opening of the belt entry door. Workpiece feed 1.1 or 1.5 kW with fabric-reinforced rubber transport carpet Vacuum device for work table with small parts area, fan integrated in the machine stand Complete electrical system with contactor control; automatic star-delta start-up of the motor, motor protection and ammeter for chip removal monitoring passage height 200 mm grinding belt size 1350x 2000 mm Automatic thickness adjustment over the whole working width Workpiece overthickness safety device with immediate feed stop and automatic lift-off of the machine upper part Stepless regulation of chip removal Bwslq Ixskwhxis E Ejl Electronic feed control on the control panel, infinitely variable 3 - 15 m/min. PLC control/programming with touch screen (Color) and TEACH-IN storage (at the push of a button according to the grinding result, i.e. no typing required) Pneumatic carpet run control Workpiece support tables at infeed and outfeed ENORMATIC: Fully automated quick setting and feed triggering (very useful e.g. for large workpieces) eco* energy saving mode Error diagnosis Job and operating hours counter - Electronic segment sanding pad, Segment width 22 mm (swiveling special design) - infinitely variable sanding belt speed (with program storage) - jet nozzles for sanding belt cleaning, insert-controlled, additional exhaust nozzle - additional sanding shoe insert for lacquer sanding incl. air sword compl. swiveling incl. freight, unloading on site Incl. commissioning and instruction Location: Solingen Availability: short term

Condition: new, total length: 1,700 mm, total width: 1,000 mm, total height: 1,500 mm, table length: 900 mm, table width: 360 mm, input voltage: 400 V, grinding belt length: 2,580 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, input frequency: 50 Hz, motor voltage: 400 V, type of motor: three-phase motor, • Sanding unit can be swiveled using a handwheel • The welded steel machine base guarantees high torsional rigidity and vibration-free operation • Oscillating sanding belt with separate gear motor for better sanding results • Oscillation can be optionally activated • Sanding sole with graphite coating for a longer sanding belt service life • Height-adjustable sanding table utilizes the entire sanding belt width Bjlq Ijwg Dy Iox E Ejwl • Additional table with extraction openings for sanding radii on the rubberized guide roller • Sanding sleeve device with attachable work table • The spring-loaded belt tension automatically compensates for belt length differences Technical specifications: Dimensions and weights - Length (product) approx. 1700 mm - Width/depth (product) approx. 1000 mm - Height (product) approx. 1150 mm - Weight (net) approx. 250 kg Extraction connection: - Number of extraction nozzles: 2 - Extractor nozzle diameter 100mm Worktable: - Worktable length 900mm - Worktable width 360mm - Worktable height adjustment 110mm Electrical data: - Supply voltage 400V - Mains frequency 50Hz - Oscillation motor power - Sanding unit power 0.11kW - Sanding belt length 2580mm - Sanding belt width 150mm - Belt rotation speed(s) 14m/s - Oscillation stroke 15mm - Sanding surface length 800mm - Sanding surface width 150mm - Sanding height max. 150mm - Sanding unit pivoting 0 – 90° Scope of delivery • 1x Sanding belt K100 • 5x Rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x Sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Onboard tool kit • Miter gauge If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop equipment. Contact us and we will tell you the nearest dealer.

Condition: good (used), Year of construction: 2000, Functionality: fully functional, total width: 1,300 mm, Machine in good working order. Two rollers on top and two rollers underneath. Machine price loaded on truck. Bwelq Ixou Uv Szo E Ejl Assembly available upon request.

Condition: used, Year of construction: 1992, Max. working width: 1350 mm Number of belts: 2-belt 1st unit: Combination sanding unit (11.0 kW motor) 2nd unit: Shoe unit (11.0 kW motor) Cleaning brushes: Yes Control system: Hand control panel Electric/pneumatic belt oscillation: Electric Table stroke: Electric-motorized Table display: Digital Description: With electric segmented sanding shoe Storage location: Nattheim Bolq Ixevvki Ao E Ejwl

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. Bjlq Ix Eswgc D Se Ejwl - Swivels 90-180° - Motorized belt oscillation - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm

Condition: good (used), Code: 0101 Brand: SAMCO Model: UNILEV 15 Universal sanding machine for straight and round edges, drawers, chair and sofa elements, panels and various Technical data: Tilting work tables 0-30 degrees Work table length mm 1440 Belt motor power Kw 3 Belt oscillation 0-25 mm Operating pressure 6 bar Sanding belt length mm 2170 Sanding belt width mm 150 Vertical oscillating unit displacement mm 125 Bwolqewd Szzs Ix E Eol Overall dimensions mm 1500 x 750 x 950 h Weight kg 450

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Bwelswb Ei Hsq Ix E Ejl Equipment and technical specifications: Max. working width: 1100 mm Min. / max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm Sanding belt speed: 18 m/sec Feed speed: 4 + 8 m/min Sanding unit motor power: 15 kW Feed conveyor motor power: 1.1 / 1.8 kW Operating pressure: 6 bar Air consumption: 20 l/min Extraction nozzles: 2 x 150 + 1 x 120 mm Dimensions: 2690 x 1800 x 2100 mm Weight: approx. 3500 kg Storage location: Hochheim Availability: upon request

Condition: new, Functionality: fully functional, worktable width: 450 mm, worktable length: 950 mm, oscillation stroke: 15 mm, grinding belt length: 2,640 mm, grinding belt width: 150 mm, power: 2.2 kW (2.99 HP), grinding belt speed: 14 mm/s, frequency: 50 Hz, motor voltage: 400 V, Sanding unit can be pivoted using a hand crank. The welded steel machine stand guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results. Oscillation can be optionally activated. Sanding base with graphite coating for a longer sanding belt service life. Bwslq Ijwg Ddajx E Ejl Height-adjustable sanding table utilizes the entire sanding belt width. Additional table with extraction openings for sanding radii on the rubberized guide roller. Sanding sleeve device with attachable work table. The spring-loaded belt tension automatically compensates for belt length differences. With adjustable stops, it is ideal for veneer sanding. Dimensions and Weights Length (product) approx. 1700 mm Width/Depth (product) approx. 1000 mm Height (product) approx. 1150 mm Net Weight approx. 300 kg Extraction Connection Number of Extraction Outlets 2 Extraction nozzle diameter 100mm Worktable(s) Worktable length 950mm Worktable width 450mm Worktable height adjustment 110mm Electrical Data Supply voltage 400V Mains frequency 50Hz Oscillation motor power 0.11kW Sanding unit: Sanding belt length 2640mm Sanding belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Sanding unit tilt 0-45° If you have any questions, please contact us! Are you looking for a specialist dealer near you? We supply specialist machine dealers throughout Germany, in European and non-European countries with metalworking machines, compressed air technology, woodworking machines, welding technology, as well as cleaning and workshop technology. Contact us and we will tell you the nearest dealer.

Condition: excellent (used), JET DDS225 Cylindrical Grinder - Used - Closed base cabinet with storage space ----- Technical Specifications ----- Grinding width: 635 mm, Max. workpiece thickness: 133 mm, Min. workpiece thickness: 0.8 mm, Min. workpiece length: 230 mm, Grinding drum diameter: 152 mm, Feed speed: 2/3 m/min., Speed: 1,400 rpm, Motor: 5.5 kW, Extraction nozzles: 2 x 100 mm Quality information: Bslev U Anzeq Ix E Eewl - Complete basic cleaning - Electrical system checked - Adjusted according to manufacturer's specifications - Ready for immediate use

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Bolq Isvvki Nox E Ejwl Storage location: Nattheim

Condition: used, Year of construction: 1994, Functionality: fully functional, total length: 6,800 mm, total width: 2,400 mm, total height: 2,000 mm, table length: 2,200 mm, Universal grinding machine type USM with milling and sanding units UNIVERSAL MILLING AND SANDING MACHINE TYPE UFSM Suitable for machining straight and profiled edges on panel-shaped workpieces, the ends of strips and posts, stair treads, etc. Bslewf U Awsq Ix E Ejwl Design: 1. BASE MACHINE, length: approx. 6,800 mm, machine table length: 2,200 mm for a maximum workpiece length of 2,000 mm, drive for automatic table reciprocating motion, feed rate in the range of 4 - 40 m/min. Continuously adjustable 2. Workpiece clamping device TR, 0-80 mm 3. Profile milling unit, working from below, P = 3.7 kW and n = 6000 rpm 4. Profile milling unit, scanning from above, P = 1.5 kW and n = 6000 rpm 5. Sanding unit S 2000 K, for grinding straight edges, P = 2.4/3.0 kW 6. 2 x Sanding units S 2000 x 60 DF, for grinding the lower and upper radius, P = 0.6/0.9 kW 7. Digital electronic, travel-dependent tool control for precise tool insertion and removal, independent of the feed rate

Condition: good (used), Code: 0098 Brand: MINIMAX SCM Model: LS 3000 - CE Standard Belt sanding machine with double goose neck - with 3 motors - CE Standard Table length mm 3000 Table width mm 1100 Bwslq Ixswd Hafe E Esl Automatic table lifting stroke mm 580 2-speeds belt motor Sanding belt lenght mm 8100 Pulleys diameter mm 250 Belt width mm 150 Manual pad mm 150 Gooseneck depth mm 820 Overall dimensions: mm 4150 x 1500 x 1600 h Weight kg 485

Condition: used, Year of construction: 1983, incl. new feeder beltusedmanufactured by Löwertype RSM 280 SXbuilt in 1983Masch.-No. 5245number of aggregates 1 piecemotor 5,5 kWsanding width ca. 190 mmsanding height ca. 120 mm3 feed speeds 6 / 11 / 16 m/t length ca. 1600 mmbelt width ca. 200 mmheight indicator gauge analogcombined aggregates roll/padfixed sanding pad1-beltstrip blowing deviceexhaust connection D 100 mmrequired space ca. 1300 mm x 800 mm x 1700 mmweight ca. 550 kgtotal connected power ca. 6,5 kWlocated in 97447 Gerolzhofen, free on truck, unverpacktsale in current condition as seen,without revision,without guarantee and Gewährleistung Bjlqjvwf Nyo Ix E Eowl

Condition: excellent (used), CATALOG NUMBER 7646 Technical data: - max. width of the processed element 1100mm - max. thickness of the processed element 150mm - from above: - 2 rubber, sliding, pressure rollers Roller I - grooved rubber roller for calibration Roller II - aggregate + shoe - rubber, sliding roller - brakes - cleaning of grinding belts (blowers) - from below: - 2 sliding, metal, inlet rollers Belq Iowglqhsx E Eewl - pulling belt - 2 sliding, metal, outlet rollers - pneumatic belt oscillation - electric table lifting (digital measurement display) - total power 22kW - smooth speed regulation on the inverter - working pressure 6-8bar - diameter of the exhaust port 3x180mm - total dimensions length/width/height 2250x1950x2500mm - weight about 2400kg ADVANTAGES - Italian production - two aggregates - very good condition - unpainted - used grinder Net price: PLN 29,900 Net price: EUR 7,040 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)Net price 29,900,-

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Bolq Ixsu R S Erj E Eswl Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Bslqjvvkipe Ix E Eowl

Condition: used, Year of construction: 1975, with new feed carpet, not installed second hand Make Löwer Type RSM 280 S Year of construction 1975 Machine no. 3528 Number of belt units 1 piece Belqovwgczj Ix E Eowl Engines 5.5 hp Sanding width approx. 140 / 150 mm Grinding height approx. 120 mm band oscillation tape blow-off Feed speed 6 / 11 / 16 m/min. Band length approx. 1600 mm Band width approx. 160 mm Extraction connection D 100 mm Space requirement approx. LxWxH mm 1400x1000x1600 Weight approx. 650 kg Storage location 97447 Gerolzhofen Handover in the current condition as seen without guarantee and guarantee - free loaded -

Condition: new, Wide belt sander CASADEI LIBRA 10/95 TC Promotional model from stock -Working table height adjustment with electronic display of the working height -Oscillation of the sanding belts with electronic system -Rubber-coated grooved pressure roller at infeed 1° Position with backstop -Grooved calibration steel roller -Switching the sanding pad on and off from the control panel -Switching the roller on and off from the control panel -Fox 500 KTR electronic control unit -Table extension with 2 rollers in the infeed and outfeed Bwelq Ixsu R S D Us E Esl -Automatic table positioning: automatic adjustment of the work table height automatically via microswitch without correction of the material removalDimensions and dimensions and weights: - Length (product) approx.: 1388 mm - Width/depth (product) approx.: 1545 mm - Height (product) approx.: 1668 mm Suction connection: - Suction nozzle diameter: 140 mm Electrical data: - Power feed motor: 0.33 / 0.55 kW - Drive motor output: 7.5 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - Height adjustment motor power: 0.25 kW Sanding unit: - Sanding belt length: 1525 mm - Sanding belt width: 970 mm - Sanding width max.: 950 mm Feed unit: - Feed speed: 4.5 / 9 m/min Workpiece: - Workpiece height min.: 4 mm - Workpiece height max.: 170 mm Subject to prior sale. - new exhibition machine -

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Storage location: Nattheim Bslqevvkkas Ix E Eewl

Condition: new, HOUFEK SPB Buldog 5 RC wide belt sander -Exhibition machine- Includes: - HOUFEK SPB Buldog 5 RC wide belt sander Working width: 1,350 mm Includes: - Grooved steel roller Ø 160 mm HOUFEK Bslqeu R Szms Ix E Eswl Including: - HOUFEK segmenter sanding pad electronically controlled, for width 1,350 mm Sanding pad PS 50 E Includes NC control with 10.1" touchscreen Frequency converter for the sanding unit 3-18m/s Automatic table positioning Two-zone interval blow-off device with Nozzle oscillation for sanding belt cleaning - new exhibition machine -

Condition: used, Year of construction: 1988, Working width: 1100 mm, 2-belt machine Bwelqevvkkgo Ix E Eel Storage location: Nattheim

Condition: used, Storage location: Nattheim Bwoljvvklqoq Ix E Ejl

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Bwjlq Ixovvkkmo E Esl

Condition: used, Year of construction: 2022, Oscillating cylindrical grinder from hnische specifications. A possible screw variant for spindle sleeve clamping. It is used somewhat similarly to the ProLoc device. Bjlqjvvkkyo Ix E Eswl Storage location: Customer

Condition: used, Year of construction: 2022, Oscillating cylindrical grinder from hnische specifications. A possible screw variant for spindle sleeve clamping. It is used somewhat similarly to the ProLoc device. Storage location: Customer Belovvkk Hjq Ix E Eswl