Used Kruesi for sale (7)

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, Krüsimatic G2 Joinery Center – Used, Completely Overhauled Condition & Overhaul The machine has been completely overhauled by Krüsi Maschinenbau AG. It will receive a new control system, regulators, servo motors, and cabling – with a 12-month warranty on the mechanics and new components. Technical Specifications • Wood clearance: max. 200 x 320 mm • Feed-in length: 10,000 mm • Feed-out length: 10,000 mm • Supply voltage: 3 x 400 V / 50 Hz • Fuse protection: 3 x 63 A (provided by customer) • Pneumatic pressure: ≥ 8 bar • Air consumption: 10 – 15 m³/h • Machine control: IST software / Abb3d • Interface: BTL-compatible Processing units Gate 1: • 5-axis sawing unit (angle-limited) • 4-axis milling unit with 5-axis spindle head (horizontal) + marker • 4-axis notching unit with 2-axis spindle head (vertical) • Drilling unit with two horizontal tool holders • Chain slotting unit Gate 2: • Two Chalet milling motors (vertical) • Two Chalet milling motors (horizontal) • Two drilling units (horizontal) Hnjdpfewb Ev Hjx Ag Ujg • Grooving unit (horizontal & vertical) Accessories • Extensive tooling included • Two compressed air tanks to reduce the weight of the gangs The perfect opportunity for carpentry shops, timber construction companies, and joinery centers that value reliability and precision – with a factory warranty

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Hnedevwfqqspfx Ag Usg

Condition: good (used), Year of construction: 1996, functionality: fully functional, KRÜSI Chalet Building Machine / Log House Production Line Type CM 40 POS 1: Motor driven roller conveyor working width 400mm, stepless feed speed 2,0 kw motor, length 6000mm Hodpfx Agjhw N Npe Usng POS 2: Longitudinal cutting saw diameter saw blade 400mm Pneumatic feed of the saw depth Main motor 4,0 kW POS 5: KKRÜSI RÜSI chalet building machine / log house finishing machine type CM 40 Machine-No.431 Year of manufacture 1996 Sawing unit: Manual feed spindle adjustment with analog dimension display CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display Drilling unit: Manual feed Spindle adjustment with analog dimension display Face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display POS 6: Motor driven roller conveyor working width 400mm, stepless feed speed 2,0 kW feed motor length 12000mm 9 pcs. stop flaps, adjustable, pneumatically controllable 10 pieces sideshift for material transfer POS 7: assembly table 4.400mm x 12.000mm Manufacturer: Sweden Year of manufacture approx. 1985 Assembly table for further processing of the manufactured log house planks. 4 chain hoists for cross transport gear motor with 4,0 kW

Condition: good (used), Year of construction: 1994, I sell the automatic CNC working centre for BLOCK-HOUSE production Krüsi CM-40. Year 1994. Incutting saw Tenoning head Top + Bottom Tenoning head Left + Right Dowel drilling unit 4-head milling unit Automatic feeding system +-1mm Hnodper Atcysfx Ag Ujg Entry length 12m Suitable for wooden house constructions! Available immediately.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Two machines in one, made by the best Swiss CNC manufacturer. 1. Log milling 2.Timber Framing. This machine produced machined log structures for 6 years, (dormant since), of high precision and quality, for very discerning buyers. For progressive builders who want to automate milled log structures up to 8" x 12" material, or use strictly for timber framing. Best suited for USA or Canada customer, for easy truck transport. Delivery, set-up, calibration, operational training arranged at cost. Hnsdpfowvwl Asx Ag Usg Self-contained Compact design, only 10 feet deep, 8 feet wide. All processes are performed inside the enclosure. Cut-offs fall into and are removed from a central pit. Mill shavings are extracted by air suction, leaving work area remarkably clean. So quiet, you can have a conversation beside the working machine.

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Hnsdpfx Agsu Uh T Ds Ueg Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: good (used), Year of construction: 1996, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 1996 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr Hnedpsvfv Tfjfx Ag Ujg