Condition: refurbished (used), Automatic line for forging / hot stamping Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW -End-of-bar scrap equal to or shorter than the usable piece -Central hydraulic tank capacity: 200 liters Bwjdpfxjzcdluo Ap Isw -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Condition: used, Year of construction: 2008, Manufacturer: Fritz Müller Machine type: Hydraulic drawing press Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 General overhaul: 2008 Total drawing force, press ram: 1,000 – 12,000 kN Drawing force: 7,000 kN Holding force per cylinder: 200 – 1,250 kN Ram surface area: 3,500 × 2,200 mm Max. ram stroke: 1,330 mm Max. drawing depth: 430 mm Distance, table – holding cylinder, top dead center: 2,700 mm Distance, table – holding cylinder, bottom dead center: 1,420 mm Distance, table – ram, top dead center: 2,500 mm Distance, table – ram, bottom dead center: 1,200 / 1,600 mm Bedpfx Apey Ndz Re Ioww Hydraulic table cushion, one-piece: Displacement force: 800 – 2,500 kN Stroke: 0 – 300 mm Cushion surface area: 2,700 × 1,200 mm Table clamping surface: 3,500 × 2,200 mm Clear width between guides: 3,550 mm Max. tool weight: 32 t Max. plate width: 2,200 mm Max. plate length: 1,600 mm Sheet metal thickness: 0.5 – 2.5 mm Feeding height above table: 650 – 900 mm Max. single part weight: 40 kg Max. stack height: 450 mm Max. weight per plate stack: 4.5 t Single or double plate feeding possible Electronic double sheet control available Rapid descent speed: max. 500 mm/s, unregulated Working speed: 30 – 115 mm/s Return speed: 30 – 600 mm/s Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: new, stroke: max. 500daylight: max. 1000motor: 15performance of pump: 65oil filling: 120messurements (LxWxH): 1300 x 3300 x 2950weight approx.: 6000pressure: 300Speed: vorlauf 8 / rücklauf 13,5Electro-hydraulic workshop press 300 t- Anti-rotation device for the cylinder piston - Pressure regulating valve - Speed control throttle valve - Emergency stop safety device - Noise level: 75 dB - Soft starter - Two-hand control panel - Linear measuring device for stroke adjustment with digital display - Pressure gauge Bsdsz Hgb Ajpfx Ap Ioww - Digital pressure display - Emergency stop buttons on the control cabinet and on the two-hand control panel - Hydraulic tank including motor mounted at the lower side next to the frame - Hydraulic lines with check valves - Table manually height-adjustable and secured with 3 locking pins

Condition: used, Year of construction: 2008, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Including sound insulating cabin. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Bwjdpfxjzh Nnwj Ap Iow Press table area: 1080 x 650 mm Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: for profile steel shears, flat steel shears, 2 pieces -Hole spacing: 135 x Ø17 mm Bwodpjzr Hlnsfx Ap Iow -Dimensions: see photos -Submission/Price: complete -Dimensions each: 175/107/H125 mm -Weight: 6.1 kg/pc.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, with feed mechanism with linear guide, 400 mm band width, 3 mm band thickness with reel: 2000 kg, band width 360 mm, with drive PLC: Siemens SIMATIC S7-300 Operator panel: Siemens SIMATIC HMI OP277 Control technology comprehensively modernized (retrofit 2021) Bedpfx Apoz Dv Uae Ieww Press data: Pressing force: 800 kN Stroke: 8 - 110 mm Installation height: 390 mm Stroke rate: 30 - 120 /min Ram adjustment: 100 mm Table: 1000 x 800 mm Ram: 1000 x 800 mm Weight: 16000 kg Dimensions: 3400 x 2000 x 2000 mm (h x w x d)

Condition: excellent (used), Year of construction: 1973, Description to follow! Bsdpfxozxh S No Ap Ieww

Condition: excellent (used), functionality: fully functional, Manufacturer: Šmeral Type of machine: Hot forging press Bedpfx Apszxhzwe Ieww Rated pressing force: 1,000 t Ram stroke: 220 mm Stroke rate: 100 strokes/min Table size: 995 × 950 mm Ram adjustment: 10 mm Stroke of upper ejector: 35 mm Drive power: 40 kW Weight: approx. 45 t

Year of construction: 2005, condition: ready for operation (used), overall weight: 9,500 kg, total width: 1,700 mm, total height: 2,300 mm, pressing force: 102 t, product length (max.): 3,800 mm, number of axes: 8, CNC Hydraulic Press Brake manufactured in 2005. This GASPARINI X-Press 100 features a press force of 100 t and a bending length of 3,100 mm. It is equipped with a Delem DA60 control and a dynamic hydraulic crowning system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI X-Press 100 machine we have for sale. Contact us for further details regarding this machine. • Ram stroke: 300 mm • Tool clamping: Promotec pneumatic system Bsdpszypi Ejfx Ap Ioww • Hydraulic crowning: Dynamic hydraulic crowning of the lower table • Axes: Y1, Y2, X, R, Z1, Z2, X1, X2 (8 axes) • Oil seals: Replaced • Oil: New • Warranty: Included • Condition: Machine guaranteed / ready for sale Technical Specification Bending Length 3100 mm

Condition: used, Year of construction: 1997, Press force: 40 t Stroke: 620 mm Throat depth: 280 mm Bjdpfx Apszypmwj Isww Shut height (stroke up): 830 mm Table area: 620 x 520 mm Table opening: 150 mm Table height above floor: 600 mm Ram area: 150 mm Downstroke speed: 120 mm/s Upstroke speed: 30 - 450 mm/s

Condition: used, Available quantity: 4 units Manufacturer: MÜLLER Type: ZE 800-35.1.1 Year of manufacture: 1969 General overhaul: 2008 Pressing force: 8,000 kN Pulling force, press ram: 8,000 kN Ram stroke: 1,100 mm Ram surface area: 3,500 × 2,200 mm Max. dimension at the hydraulic clamps: 2,040 mm Hydraulic table cushion, one-piece: Displacement force: 250 – 2,500 kN Bsdpfx Apszw Nq Do Isww Stroke: 85 – 300 mm Cushion surface area: 2,700 × 1,500 mm Hydraulic ram cushion, unregulated: Displacement force: 100 – 1,000 kN Stroke: 150 mm Cushion surface area: 2,400 × 1,500 mm Distance, table – ram TDC: 2,200 mm Distance, table – ram BDC: 1,100 mm Table clamping surface: 3,500 × 2,200 mm Clearance between guides: 3,550 mm Max. tool weight: 32 t Equipment: Punch impact damper Speeds: Rapid descent speed: max. 500 mm/s, unregulated Working speed: 5 – 140 mm/s Return speed: 30 – 420 mm/s Operating modes, table cushion: Return without locking, followed by ejection Return with locking and delayed ejection Operation with the pull cushion deactivated is possible Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: new, pressure 28.0 t throat 225 mm stroke 150 mm table surface area 325 x 300 mm work speed 2.0 - 9.8 mm/sek return speed 12.8 mm/sek total power requirement 4.0 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge Bsdpfjzkl Hujx Ap Ioww - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 80 t, stroke length: 300 mm, table width: 800 mm, table length: 600 mm, throat depth: 330 mm, EXNER hydraulic single-column press, NEW, EEX SL 80 series Pressing force: 800 kN Mechanical depth stop Control system: Siemens S7 - 1500 Installation height: 450 mm Stroke: 300 mm Table dimensions: 800 x 600 mm Bjdpfjzcwrnsx Ap Ijww

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Bsdpozdf Utsfx Ap Ijww Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2005, Pneumatic Press Tox Inventory No. 3941 Bwjdpfx Apszzruge Iew Power Pack Press Tox Pressotechnik Type Stiskalnika 12050052 Year of Manufacture 2005 Type BS 15.30.100.06 No. 800322.35 * Two-hand control STE 003-03- 1/2" * Pressure force kN * Working stroke mm * Power stroke mm * Reach approx. 220 mm * Table size 450 x 400 mm * Installation height approx. 265 mm * 2 manual controls * Air inlet bar * Electrical connection 230 V * Space requirement: approx. W 700 x H 2050 x D 1050 mm * Weight approx. 500 kg

Condition: excellent (used), Year of construction: 2001, - No. 4 Schuler 630-ton presses - Capacity: 630 tons - Stroke: 1,300 mm - Die cushion tonnage: 24 – 160 tons - Die cushion stroke: 200 mm - Die opening (Pmi): 800 mm - Work surfaces: 2,500 x 2,100 mm - Mobile press tables: No. 2 Bwsdpfxezy Uvqs Ap Ijw - Approach speed: 600 mm/min - Working speed (50%): 96 mm/min - Working speed (100%): 46 mm/min

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic Bwedpez Afhpsfx Ap Isw - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: used, Year of construction: 1978, Press force: 500 t Stroke: 600 mm Frame width: 1550 mm Bwodpfxozyl Dro Ap Ijw Side frame opening: 1250 mm Shut height (stroke up): 900 mm Table area: 1200 x 1300 mm Cushion force in table: 250 t Cushion stroke in table: 150 mm Cushion area in table: 950 x 950 mm Table height above floor: 1245 mm

Condition: good (used), Year of construction: 1990, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Bwjdpfjz Atv Ijx Ap Ijw Electric power total: app. 31 kW Weight: app. 13.000 kg Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: new, Year of construction: 2026, functionality: fully functional, power: 13.5 kW (18.35 HP), input current: 25 A, input frequency: 50 Hz, pressing force: 160 t, table width: 740 mm, table length: 1,300 mm, table height: 200 mm, ram plate width: 920 mm, ram plate length: 580 mm, distance table to ram: 600 mm, total length: 2,500 mm, total width: 1,700 mm, total height: 3,500 mm, overall weight: 15,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, TEHSLA EPC160 – 160 TON MECHANICAL ECCENTRIC PRESS MAIN TECHNICAL DATA - Press Force: 160 tons - Stroke Rate: 24–52 strokes/min (adjustable) - Stroke Length: 16–160 mm (adjustable) - Ram Adjustment: 0–110 mm (motorized) - Maximum Opening Between Tables: 600 mm - Table Dimensions: 1,300 × 740 mm - Ram Dimensions: 920 × 580 mm - Main Motor Power: 15 kW - Control Panel: SIEMENS SIMATIC HMI MTP1200 Comfort PRO - Clutch System: Wet clutch - Safety Light Curtains: LEUZE - Ram Guidance: Eight-sided precision guiding system MACHINE TECHNICAL SPECIFICATIONS Machine Frame: Heavy-duty welded steel construction, engineered for high rigidity, structural stability and long-term durability under demanding industrial operating conditions. Control System: SIEMENS control system with SIMATIC HMI MTP1200 Comfort PRO touchscreen interface. Clutch System: Wet clutch system designed for reliable operation and long service life. Stroke Adjustment: Adjustable eccentric stroke from 16 to 160 mm. Stroke Speed Adjustment: Variable operating speed from 24 to 52 strokes per minute on plc. Ram Adjustment: Motorized ram adjustment, 0–110 mm. Guidance System: Precision eight-sided ram guiding system, providing excellent stability, accurate ram movement and reduced wear during continuous operation. Lubrication: Automatic circulating lubrication system. Overload Protection: Hydraulic overload protection system. Safety Light Curtains: LEUZE safety light curtains for operator protection. Safety Monitoring: Oil and air pressure monitoring with alarm functions. Operation Modes: Inch / Single Stroke / Continuous Stroke. Safety Operation: Two-hand control system. CE Compliance: Manufactured in accordance with applicable CE safety requirements. OPTIONAL EQUIPMENT & UPGRADES - Pneumatic holding systems - Mechanical or pneumatic ejector systems - Die cushions / pneumatic cushions - Customized ejector and cushion configurations - Additional protective safety guarding - Remote monitoring and control systems - Remote diagnostics, servicing and troubleshooting - Additional automation solutions according to customer requirements WARRANTY: 12 months CUSTOM PRESS MANUFACTURING TEHSLA is a Slovenian manufacturer of industrial hydraulic and mechanical eccentric presses. In addition to the advertised EPC160+ model, we manufacture customized eccentric presses with different pressing capacities, working table dimensions, stroke lengths and technical configurations. Our machines can be equipped with additional automation systems, ejectors, die cushions and other customer-specific solutions. MADE IN SLOVENIA Manufacturer: TEHSLA Model:EPC160+ Country of Manufacture: Slovenia, European Union Machine Location:Ljubljana, Slovenia Inspection & Test Run:Available by prior arrangement. Contact us for further technical information, machine availability, customization options or a quotation. Bjdpfx Apsz R Sy Ie Ioww Other press capacities, dimensions and customized configurations are available directly from the manufacturer upon request.

Condition: used, Year of construction: 1985, machine/vehicle number: ARP-250, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, stroke length: 125 mm, total length: 2,500 mm, total width: 3,000 mm, total height: 4,500 mm, overall weight: 25,000 kg, Single-column (C-frame) eccentric press Ivo Lola Ribar ARP-250, 2,500 kN, for sale. The press has been completely overhauled, is regularly maintained, is in very good mechanical and functional condition, and is ready for immediate operation. Inspection under power is possible by appointment. Technical data (as per nameplate): Nominal force: 2,500 kN (250 t) Stroke: 40–190 mm, adjustable Ram adjustment: 125 mm Strokes per minute: 40 min⁻¹ Bwsdps Af Na Ajfx Ap Ijw Max. sheet thickness: 24 mm Distance table–ram (stroke down): 300–425 mm at 190 mm stroke, 375–500 mm at 40 mm stroke Year of manufacture: 1985 Equipment: Hydraulic die cushion Pneumatic clutch-brake T-slot table Central lubrication Air tank with service unit Separate electrical cabinet with control Dimensions and connection (approx.): Table size: approx. 1,380 x 880 mm Ram face: approx. 1,200 x 800 mm Table height above floor: approx. 800 mm Drive power: approx. 22 kW Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 24 t Dimensions (L x W x H): approx. 2.5 x 3.0 x 4.5 m Location: Slovenia Delivery terms: EXW Price: EUR 22,000 net

Condition: good (used), Year of construction: 2005, machine/vehicle number: 1151, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 125 mm, total length: 2,050 mm, total width: 1,440 mm, total height: 3,220 mm, overall weight: 8,000 kg, Single-column (C-frame) eccentric press Gorenje Indop 100 t, manufactured in 2005 and CE-marked, for sale. The press is currently in production use, fully functional, and can be inspected while running. Technical data (as per nameplate): Nominal force: 1,000 kN (100 t) Stroke: 20–125 mm, adjustable Ram adjustment: 80 mm Distance table–ram (ram at BDC): 310–390 mm at 125 mm stroke, 362–442 mm at 20 mm stroke Year of manufacture: 2005 CE marking Serial no.: 1151 Equipment: Adjustable stroke via eccentric bushing Motorized ram adjustment with position indicator Hydraulic unit (overload protection) Movable two-hand control console with emergency stop Flywheel drive Bedps Af Nh Rjfx Ap Ijww T-slot table Separate electrical cabinet Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 8,000 kg Dimensions (L x W x H): 2,050 x 1,440 x 3,220 mm Location: Slovenia Delivery terms: EXW Price: EUR 12,000 net Weight and dimensions are approximate values and must be verified by the buyer before transport.

Year of construction: 2017, condition: used, A mechanical eccentric press is offered. Mechanically operated press ram. Worktable with T-slots and a central through opening. Operating mode selector switch for single stroke and continuous stroke. Control panel with on/off pushbuttons. Emergency stop switch. Indicator light. Foot switch with protective cover. Side-mounted compressed air service unit. Protective guard in the press area. The machine features a heavy-duty press frame and a worktable for mounting dies. The press area is accessible via a hinged protective guard. Inspection possible by prior arrangement. Bwjdpfx Aez Sr I Top Iow

Year of construction: 2008, condition: used, Max. press force: 82kN, total stroke: 200mm, power stroke: 12mm, min./max. air pressure: 3bar/6bar, machine weight without tooling: 610kg. Inspection possible by arrangement. Bwedpfx Ajz I Dcmsp Isw

Condition: used, Year of construction: 1991, Offered for sale: Hydraulic CNC press brake with 5-axis backgauge. Bending length: 3060mm. Pressing force: 1300kN, max. stroke: 215mm, max. operating pressure: 340bar, usable installation height: 385mm. Inspection possible by arrangement. Bodoz Rn D Ispfx Ap Ijww