Condition: used, functionality: fully functional, Performance for 6 mm diameter pellets 2.5-3 t/h Hfjdpex S Ibgsfx Aalsd We used it for about 5 years. It was purchased used but in very good condition. All bearings were replaced 1 year ago. It was working very well before it was disassembled. A new die with rollers has been manufactured for it and is available for an additional price. For additional information, please write on Whatsapp.

Condition: used, Dimter Profipress 2500 L Hfedpfx Aajyhggroljd Year of manufacture: 2006

Condition: good (used), Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Hjdoyazdiopfx Aalefd Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: excellent (used), functionality: fully functional, working width: 1,200 mm, working length: 3,000 mm, LOMEC Windmill Press 3 GLUING SECTIONS! The press is in excellent condition! TECHNICAL PARAMETERS: - Working length: 3000 mm - Working width: 1200 mm - Pneumatic clamps - 3 gluing sections - 3 side clamps per section Machine dimensions: - Length: 320 cm - Width: 125 cm - Height: 260 cm - Weight: 700 kg Financing options available via leasing or installment payments. Simply visit our website: jbsmaszyny.pl You are welcome to test the machine. Where can you see our machines? JBS WOODWORKING MACHINES Hfodpfx Aoyr D Rvoaljd WOLICA DRUGA 26 23-310 MODLIBORZYCE Nationwide machine transport! Do you have questions? Call or write!

Condition: excellent (used), Shelf press for veneering Cooper 3000×1300, water-heated Hfjdpsyi Sfcefx Aalod

Condition: excellent (used), Working width 3200 mm year of manufacture 1992 Hfedpfxjypg Rms Aaljd motor power 7 kW pressing time adjustment automatic opening emergency stop switch - pull cord

Condition: ready for operation (used), working length 3300 mm Hsdpfsypcxtjx Aaljfd working height 1800 mm 3 vertical cylinders 2 horizontal cylinders manual operating mode

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Hedpfx Ajxgpaqoalefd Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Hodpfxewd N Rme Aalofd Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Hjdofh Tmmspfx Aalefd Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: excellent (used), Year of construction: 2003, Perforated Plate Press Schafberger + Sprödhuber (S+S Maschinenbau) Type LPP - SPECIAL FORMAT Universal Gluing Stand / Frame Press Pressing area approx. L x W 3800 x 3000 mm Installation depth approx. 1300 mm 6 hand hydraulic cylinders with integrated pressure relief valve, 60 mm stroke, max. pressing force 2,000 kg, pressure force finely adjustable with hand lever, cylinder can be swiveled 360° Including access ladder - on casters, pull-over NEW MAGNETIC LOCKS Hfedstgq Ibepfx Aaljd Ideal press for joinery shops that produce frames, solid wood panels, or windows in special shapes. Equipped with various pressing elements, see photos. Note: Used Machines: • Errors in technical specifications and subject to prior sale. • Prices quoted are for pickup from location - free shipping! Prices quoted are for pickup from location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as is, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Year of construction: 2026, condition: new, By installing the heaters, we have gained the possibility to speed up the gluing process. After the press has been heated up, the wrapping process takes 5 to 15 minutes. depending on the thickness of the veneer and the glued element. The process is widely used in factories producing furniture, windows, doors and coffins. The flexible membrane enables the gluing of both flat elements, such as: furniture sides, frames and stiles, as well as shaped elements, e.g. panels, door strips and bent fronts. Heaters power 2x2.5 = 5 kW Vacuum pump power 0.75 kW Working voltage 400V Number of phases 3 Hjdpfxjgp I Upj Aaljfd Operating voltage frequency 50 Hz Working vacuum - 0.8 ± 0.05 bar Working temperature 40-50 ± 5 ° С Maximum temperature 60 ± 5 ° С Length 3050 mm Width 1350 mm Height 1600 mm Protection degree IP2X Noise level ≤ 70 dB Weight 350-400 kg Vacuum pump capacity 25 m3 / h Working dimension 3000 x 1350 mm 700% stretch of the membrane Diaphragm thickness 2.7 mm (+/- 0.20 mm)

Condition: new, Year of construction: 2025, The E60 Super briquetting machine is a highly efficient briquetting machine, the speed of which, depending on the processed material, ranges from 40 to 100 kg/h. The device uses a 10kM engine. The briquetting machine is powered by 400V - 50Hz. The output material has a diameter and maximum length of 60mm. The device has a double pressure gauge, a device for measuring the oil level and a viewing window. Hedpfx Ajtvmf Noalefd SIEMENS LCD control, maintenance-free operation of the machine. Processed materials: • sawdust, • paper, • straw • etc. Briquette diameter: 60mm Engine power: 7.5 kW, IE2, high efficiency Efficiency: 40/100 kg/h Cylinder diameter: 1000mm Pressing force: 900 kg/cm2 Maximum briquette length: 60mm Power supply voltage: 400 V Dimensions: 1510 x 1850 x 1170 mm Weight: 770 kg Number of cycles: 7/min Number of cylinders: 3 Pump pressure gauge: electronic Oil level and temperature sensor: in the tank Control: PLC Siemens

Condition: excellent (used), Steblo PTJ trapezoidal pneumatic press. The press consists of two elements; it is possible to purchase a single section with a width of 3000mm. Hfodpfx Aox Ihurealsd Height: 900mm Width: 6000mm Maximum thickness: 110mm 8 clamping cylinders 12 leveling clamps Weight: 1560kg Very good condition, ready for operation.

Condition: used, Gross GP 80 briquetting press Motor power: 7.5 kW, Hedpfx Aoxpgyajalefd Briquette diameter: 60 mm, Hopper dimensions: 145 x 145 cm Weight: 1200 kg Year of manufacture: 2016

Condition: used, OTT 300K100 Shelf Press Shelf length: 255 cm Width: 135 cm Hjdpfx Aeyh H Uyealsfd Clearance between shelves: 350 mm Shelves are in nice gold color but have a single dent of approximately 3 cm diameter Electric heating Piston diameter: 100 mm, 4 pistons Weight approximately 3.2 t Machine in stock, inspection possible

Condition: used, Shelf Press Tiger TM/6 Shelf length: 300 cm Width: 130 cm Clearance between shelves: 650 mm Nice, straight aluminium shelves Water heating system; the machine has its own heaters and circulation Option to connect to external central heating Piston diameter: 85 mm, 6 pistons Hjdpfx Aajx S Nbbelsfd Emergency stop switch (pull cord) Pressure: 5 kg/cm2 Weight: approx. 6.5 t

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Hsdpfx Aaou R Sxxjlofd Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Hedpfx Aajyfhiielsfd Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7811 TECHNICAL DATA - Compression force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 990 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Inspection window - Motor: 5.59 kW - Max. operating pressure: 150 bar - Dimensions (L/W/H): 1700x1350x1550 mm - Weight: approx. 1100 kg ADVANTAGES – Italian manufacture – Used briquetting press – Inspection window – Very good condition Hsdpfx Aeyfhh Eealsfd Net price: 35,900 PLN Net price: 8,550 EUR based on an exchange rate of 4.2 EUR (Prices may change due to exchange rate fluctuations)

Condition: excellent (used), Catalogue no.: 7815 TECHNICAL DATA Worktable dimensions (L/W): 2900x1200mm Overall table dimensions: 3000x1300mm Operating temperature: ±40-60°C Maximum temperature: ±60°C Total machine power: 5.25kW Vacuum pump power: 0.90kW Vacuum pump capacity: approx. 25/30m3/h Noise level: approx. 70dB Dimensions (L/W/H): 3060x1400x1400mm Weight: 360kg – DTR Documentation – Unpainted – Very good condition – Used press Net price: 21,900 PLN Net price: 5,200 EUR depending on the exchange rate of 4.2 EUR Hfodjxwygcepfx Aaled (Prices may change with higher fluctuations)

Condition: used, Year of construction: 1985, functionality: fully functional, For sale: granulator from the renowned manufacturer Buhler. Granulator model: DPAA-660 Motor power: 160 kW – option to install a more powerful motor – 200 kW. Die diameter: 660 mm, Die working width: 160 mm, Granulator output on straw / sawdust: 2 – 2.5 t/h The granulator is currently dismantled. For a committed buyer, we will assemble it using new wear parts. Contact for more photos and details. Hfjdow Uh Nzepfx Aalsd Machine available for inspection in Sępólnie Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, Year of construction: 2000, Platters 240cm/115cm Base shoe width 90mm Hfodpfx Aasx Eh A Ioled Mobile hydraulic cylinders Horizontal and vertical pressing Motorized press rotation Manual or automatic cycle timer 400V

Condition: used, Year of construction: 2018, total width: 2,070 mm, total length: 3,000 mm, total height: 1,670 mm, Empty weight: 4.000 kg Price: On request - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: P0220118 - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 200 - Number of cylinders [pcs]: 6 - Total working pressure [ton]: 90 - Working pressure [kg/cm²]: 3 - Transport dimensions: 3000mm x 2070mm x 1670mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information Hfjdpfswniqzox Aaljd VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, functionality: fully functional, Wood Pellet Production Plant 10 t/h On behalf of AEK Pellets AG, Switzerland, we are selling a currently operational, fully functional production plant for the manufacture of wood pellets with a throughput of 10 t/h, expandable up to a maximum of 12 t/h. Overview - 3-press system including machines by CPM, Salmatec, Knoblinger, Friedli - Scope of supply: from dry wood shavings silo (incl. discharge screws) to pellet screen - Including control system and wiring Condition - Years of construction: 2003 / 2006 / 2007 - Plant in ongoing operation; inspections possible by prior arrangement - Annual maintenance by manufacturer - Various essential spare parts available - Manufacturer’s drawings available Main Components (excerpt) - Silo discharge screws (IPM, Gottwald) Hfodeydr Akepfx Aalsd - Conveyor technology incl. belt bucket elevators, chain and connecting conveyors - Intermediate bunker for dry shavings (48 m³) - 2 pcs. starch silos with micro dosing (26 m³) - Dry chip mill Champion CHAMP 30X54, 250 kW, with magnetic separator, foreign body extractor, and Scheuch filter - Salmatec 1900LS conditioner with moisture measurement and steam/water regulation - Maturation silos and dosing systems - Pellet presses 2× Salmatec Maxima 840 and 1× CPM 7930-4 - Belt cooler, AVITEC pellet screen (3 fractions) with pellet cracker - Central dust extraction with cyclone, bag filter (181 m²), and fan (45 kW) - Associated steel structures and access platforms Availability - Dismantling available from July 20, 2026, with later dates upon request - Commercial Terms - Sale ex site, as is, with all warranties and guarantees excluded - Buyer must ensure CE compliance of the entire plant at the new location - Dismantling and transport to be carried out by the buyer; risk and liability transfer upon start of dismantling - Lifting equipment and export documents provided by the seller - Registration of personnel and proof of insurance to be arranged by the buyer - Components not explicitly mentioned as well as external media (power, steam, water, compressed air) not included - Pellets have so far been produced according to ENplus A1; no guaranteed property - Liability for consequential damages excluded; technical details without guarantee Contact Commercial / Inspection: Marcel Moser, AEK Pellets AG Technical: Dieter Friedli, Friedli AG Engineering und Anlagenbau Friedli AG Engineering und Anlagenbau has over 25 years of industry experience and has been operating its own wood pellet production plant for more than 10 years. We are pleased to support you with consultancy, feasibility studies, and technical and commercial evaluations.