Condition: excellent (used), Year of construction: 2006, operating hours: 77,123 h, Functionality: fully functional, clamping force: 2,500 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 664 cm³, injection pressure: 2,000 bar, ejector force: 86,000 N, ejector stroke: 225 mm, plate length: 900 mm, plate width: 900 mm, installation height: 2,200 mm, total length: 6,400 mm, total width: 2,100 mm, total height: 2,200 mm, overall weight: 13,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 1,000 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 630 S 2500-1300 warehouse no.: 503418 manufacturer: ARBURG type: Allr. 630 S 2500-1300 ECO controller: Selogica year of construction: 2006 technical data clamping unit clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 400 mm max. mould height: 700 mm max. open daylight: 1000 mm opening stroke: 600 mm ejector stroke: 225 mm ejector force: 86 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 60 mm swept volume: 664 ccm injection pressure: 2000 bar screw length: 20 l/d screw stroke: 235 mm Csbvsuhw Evsmm Ikorb screw speed: 43 min screw torque: 1900 N injection rate into the open: 202 g/s PS number of heating zones: 5 nozzle stroke: 550 mm measures & weight measures of machine l x w x h: 6.4m x 2.1m x 2.2m total weight: 13500KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. water flow regulator machine without belt conveyor machine without material hopper Anti vibration mounts interface EUROMAP 67 interface for handling Schuko-socket 10A

Year of construction: 2003, Condition: refurbished (used), Theyson Compounder High torque machine 2x45 mm, with side feeder, and underwatergranulating. New (Beckhoff) PLC is fitted, but need to be programmed. Cebvonpxqljmm Ikorb

Year of construction: 2004, Condition: used, It was used as a cooling backup. Not under power Currently, 1 out of 4 Crobvmm Iovdtv Uokob compressors on the device is damaged. It has no effect on operation. That is, except for the reduced cold. power. It cooled approximately 12 presses in the company without any problems. Pressure gauges in the cooling circuit are also non-functional (this has no effect on functionality) In 2022, the last service + revision for F gases was performed.

Year of construction: 1966, Condition: used, Functionality: fully functional, machine/vehicle number: 562-66280, Hydraulic bridge punching cq cutting machine with forward and backward moving upper platen. Working area 600 x 2000 mm. Max oil pressure per cylinder 400 bar with a diameter of 185mm = 107 tons per hydraulic cylinder Guaranteed pressure force regardless of load location 100 tons Dimensions of the machine 320 x 170 x 190 cm Weight 4,500 kg Cjbeud Rhvevmm Ikjrb Machine is without oil; which has been drained upon removal All electrical documentation is complete; even warranty certificates for the Sick photocells from 1970 !

Condition: good (used), Functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter Crjbvmmju Hik Dj Ikjb - 4x heating zones - dosing - Control system

Condition: excellent (used), Year of construction: 2016, Implantation by gravity fall or full column. Mechanical Description: • Height: 320 mm max • Effective passage diameter: 45 mm • Aluminum ejection valve • Aluminum Chassis • Phenolic resin inner tube (anti-wear option on request) • Overload tolerated above the device: 150kg Crobvmmohr R Iue Ikeb • Weight: approximately 18kg Conditions of use: • Working temperature: 0 to 60°C • Protection: IP50 • 4 to 6 bar compressed air, water and oil free filtered, quick coupling NW7.2 • Maximum product drop height: 0 to 600mm • Maximum flow rate with standard pellets from 2 to 4mm: 5400 L/H • Detection sensitivity with STANDARD electronics • Ferrous: 0.35 mm • Stainless steel: 0.9 mm • This data may vary depending on the location, vibration or effect may reduce sensitivity.

Condition: good (used), Year of construction: 2007, operating hours: 54,840 h, Functionality: fully functional, clamping force: 2,700 kN, screw diameter: 75 mm, clearance between the columns: 630 mm, displacement volume: 1,657 cm³, plate length: 940 mm, plate width: 940 mm, installation height: 2,400 mm, total length: 7,350 mm, total width: 1,800 mm, total height: 2,400 mm, overall weight: 16,000 kg, input frequency: 50 Hz, clear span: 1,250 mm, Equipment: documentation/manual, injection moulding machine BATTENFELD TM 270-3300 warehouse no.: 503221 manufacturer: BATTENFELD type: TM 270-3300 controller: UNILOG B4 year of construction: 2007 operation hours: 54840 h technical data clamping unit clamping force: 2700 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 940 x 940 mm min. mould height: 250 mm max. mould height: 650 mm max. open daylight: 1250 mm opening stroke: 600 mm ejector stroke: 200 mm ejector force: 59 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm Csbvmouhwgmom Ikerb weight of mould: 3200 kg technical data injection unit screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2087 bar screw length: 22 l/d screw stroke: 375 mm screw speed: 178 min screw torque: 3759 N plasticising rate: 76 g/s PS injection rate into the open: 346 g/s PS number of heating zones: 5 nozzle stroke: 600 mm measures & weight measures of machine l x w x h: 7.35m x 1.8m x 2.4m total weight: 16000KG equipment included screen text dutch core pulling hydraulically 1x air valve 1x machine with material hopper machine incl. water flow regulator Machine without Handling machine without hopper loader Anti vibration mounts interface EUROMAP 67 interface USB

Condition: excellent (used), Year of construction: 2000, Robot with 4 Meters X axis Crobvmm Iemx Rxkskeb

Condition: excellent (used), Year of construction: 2012, Clamping Unit • Clamping Force: 50 Ton • Opening Force (max): 40 kN/mm • Mould Height (fixed/variable min): 200 mm • Platen Daylight (fixed/variable max): 450-550 mm Cebvjvtn Nbemm Ikerb • Weight of Movable Mould Half (max): 230 kg • Ejector Force/Stroke (max): 30 kN / 70 mm Injection Unit (100) • Screw Diameter: 20 mm • Effective Screw Length (L/D): 25 • Injection Volume: 31 cm³ • Shot Weight: 29 g (PS) Machine Specifications • Weight of Machine: 3,049 kg • Transport Dimensions: 2.7 m x 1.5 m x 2.2 m • Transport Weight: 3.6 tons Safety • Barrier: Optical barrier only (no mechanical barrier). 2x hydraulic core puller

Condition: new, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 3225716, Touch panel and PC for Weber extruder, new and unused Manufacturer: RMA Maschinenautomation GmbH Type: Touch Panel PC PSQ - ET PC-115-PSQ Year of manufacture: 2017 Serial no.: 3225716 Dimensions: appr. 400 x 310 x 80 mm, (WxHxD), incl. Front panel Weight: appr. 5.5 kg Cobvmmsvmm Ays Iksrb The touch panel including PC was purchased in 2017 from Weber - Kronach as a spare part. After that, the touch panel incl. PC was no longer used.

Condition: good (used), - Twin screw extruder - Counter-rotating screws - Screw diameter: 52 mm - Drive: 15 kW - Control system Cjbvmmsrvxx Hs Ikorb - Built-in screen changer / filter - Extruder nozzle installed - New control system The system can be inspected by appointment in Wuppertal.

Condition: as good as new (ex-display), Year of construction: 2019, Functionality: fully functional, Volumetric feeder type DM10-38 with inclined feed line 15-liter capacity stainless steel hopper 1/38 brushless geared motor - 118 W - 3000 rpm Power supply 230 V mono - 50 Hz Weight : 19 kg Type 1KC2020 screw and bush assembly for DM10 filler Screw D.20 mm at 20 mm pitch Sleeve D.28 mm Connection Ø 50mm Cast aluminium base type BMS80 for DM10-20 Material inlet: 92 x 92 mm and outlet D.80 mm Height: 234 mm Cobvmjrlm Ihjm Ikjrb

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, Functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 1200 T 1000-170 warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm ejector stroke: 175 mm ejector force: 25 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1150 kg technical data injection unit Crjbjugglvovmm Ikjb screw diameter: 20 mm swept volume: 31 ccm injection pressure: 2500 bar screw length: 25 l/d screw stroke: 120 mm number of heating zones: 4 nozzle stroke: 210 mm measures & weight measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit

Year of construction: 2018, Condition: good (used), Pan Stone D V 500 PCD elastomer press, Year of manufacture 2018, Control B & R Touch Display 2018, Clamping force 5000 KN, Demolition max 800/300/300 mm, Clear width of lifting units 870 mm, Upper piston press, Clamping 800 x 800 mm, Magnetic clamping, Vacuum chamber 900 mbar stroke 400 mm, Top clamping plate can be swiveled 60°, Central ejector, Csbvmovvlz Hom Ikorb Oil preheating,

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Year of manufacture: 2000 Screw: 45mm Core pulls: 1x Hot runner: 6x Cebevu Szwovmm Ikjrb incl. conveyor belt

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Maximum Forming Area – 700 x 450 mm Maximum Forming Height – 150 mm Maximum Film Width – 750 mm Maximum Feed Length – 480 mm Maximum Clamping Force – 40.000 daN Maximum Cutting Length – 8.400 mm Idle Speed – 30 min⁻¹ Electrical Connection Power for Top and Bottom Heaters – 111.3 kW Electrical Connection Power for Motors – 10.5 kW Total Electrical Connection Power with Top and Bottom Heaters – 121.8 kW Compressed Air Requirement per Cycle at 6 bar/min (Basic Machine) – 400 L Compressed Air Requirement per Cycle at 6 bar/min (with Hydraulic Upper Platen) – 320 L Machine Length with Film Roll, Stacking, Counting, and Ejector Unit – 9.875 mm Machine Width without Control Cabinet (with Hydraulic Unit) – 3.850 mm Crjbvsvurcuomm Iksb Total Height (Basic Machine) – 3.500 – 3.700 mm Total Weight – 11.000 kg

Condition: like new (used), Functionality: fully functional, Volumetric dosing - With built-in Ruhrwerk Crebvmm Iot Akaqsksb - Twin screws - Built-in tamping unit for materials with low bulk density

Condition: excellent (used), Year of construction: 2012, Volumetric feeder type DM30-38 with horizontal feed line Equipped with D.50 mm screw at 50 mm pitch Supplied without hopper 1/38 brushless geared motor - 220 W - 3000 rpm Cjberl Rv Tevmm Ikjrb Power supply 220 V mono 50 Hz Weight : 25 kg

Condition: good (used), Year of construction: 2018, Pan Stone D V 200 PCD elastomer press, Year of manufacture 2018, Control B & R Control Touch Display, Clamping force 2000 KN Demolition max 800/300/300 mm, Clear width of lifting units 570 mm, Upper piston press, Clamping 800 x 800 mm, Cebjvvly Novmm Ikjrb Magnetic clamping, Vacuum chamber 900 mbar stroke 400 mm, Top clamping plate can be swiveled 60°, Central ejector, Oil preheating,

Condition: excellent (used), Year of construction: 2003, operating hours: 69,313 h, Max. Forming area – 750 x 540 mm Min. Forming area – 375 x 270 mm Max. Tool dimensions – 770 x 560 mm Positive formed part height – 150 mm Negative formed part height – 150 mm Crjbvsvura Temm Ikob Maximum foil width – 800 mm Operating pressure – 6 bar Air consumption max. – 60 Nl/cycle Capacity of top heater – 31,5 kW Capacity of bottom heater – 31,5 kW Suction capacity of vacuum pump – 160m3/h Operating voltage – 3 x 400V + N + PE, 50Hz Total connected load – 125 – 140 kVA Maximal capacity ( no load operation ) – 50 cycles/min. Weight approx. – 10.000 kg Dimensions – 11.000 x 2.500 x 3.300 mm

Year of construction: 2006, Condition: as good as new (ex-display), Only been used for a short time in the technical center, therefore in very good condition. Crobvmol Slv Tom Ikjb We are always available for further questions.

Condition: as good as new (ex-display), MC Weight hopper on load cell for flow reading. Max. capacity 500kg/h, touch-sensitive control screen, cables supplied. Epoxy exterior varnish. Internal parts in stainless steel ANSI304 =. Crjbvsrlm Sljmm Ikjb Pneumatic gate valve, load cells 2x50kg/h, Ø outlet 40mm

Year of construction: 2024, operating hours: 10 h, Condition: like new (used), This line is suitable for extruding shredded polystyrene and EPS (light form) into pellets. - Single screw extruder / melt extruder - Screw diameter: 145mm - Drive: 45 kW - Induction heating - Stuffing unit Cobvmmetziudj Ikerb - Hopper for material feed. (Suitable for material with low bulk density) - Large filter / screen changer - Adapted strand nozzle

Condition: good (used), Manufacturer: "Alpina" Cutting mill, suitable for secondary shredding. Drive: 15 kW Fully functional, with control. - Optionally with blower and suction to the cyclone. Suitable conveyor belt in stock. Cobvmm Ietw Sf Soksrb

Condition: new, Functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor 95 kW - Volumetric K-Tron dosing - Degassing zone - K-SWE 180 double piston screen changer / filter Csbvsqy E Evemm Iksrb - strand nozzle - Control system Optionally with strand pelletizer, water bath etc. Inspection possible by arrangement