Hydraulic bridge punching cq cutting machine

Sandt 562

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. Tjdjtyy Sfepfx Ahuof In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: good (used), Year of construction: 2000, total height: 47,000 mm, total width: 27,000 mm, total length: 25,000 mm, table width: 1,000 mm, table length: 1,800 mm, overall weight: 43,000 kg, ram plate width: 600 mm, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Tsdpfx Astiwgijhujf Side passages Ground level installation

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy Tjdpfx Ajt E Nthshujf ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg Todpfevphiyox Ahuef * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, BRAUSSE 1450 SE Year: 2008 Max. size: 1055 x 1450 mm Max. cutting force: 400 t Max. speed: 5500 Sh/h Quicklock system Centerline Tedpfot D Ncajx Ahujf in production

Condition: excellent (used), gear motor, electric motor, electric gear motor, spur gear motor -Condition: unused -Manufacturer: SEW-Eurodrive, spur gear motor -Type: RF97 DRN132S4/TF i27.58 -Speed: 53 rpm -Power: 5.5 kW -Shaft: Ø 60 x 90 mm -Protection class: IP54 -Quantity: 2 pieces available Tedpfet Uluyjx Ahuof -Price: per piece -Dimensions: 860/350/H410 mm -Weight: 170 kg/piece

Year of construction: 2024, condition: new, Beam Cutting Machine with receding beam Cutting Area 1800x1200 mm Tjdpeim R N Uefx Ahusf Cutting force 130 Tons

Condition: used, Technical details: turning diameter over bed: 460 mm turning diameter over support: 350 mm turning length: 1500 mm centre height: 250 mm spindle bore of work spindle: 52 mm Tsdpfx Ajwa Nwfehuof range of revolution per miute: 35 -1800 U/min tailstock quill adjustment:: 230 mm tailstock taper MT: MK4 weight of the machine ca.: 2,7 t dimension machine xH: 2,88 x 1,2 x 1,5 m Coolant pump with feed to manual valve Accessories: Steady rest D=130mm closed 3 Jaw chuck D=315mm from Forkhardt F315 *

Condition: good (used), Year of construction: 1999, MOSCA strapping press Automatic pallet strapping machine, model KPK-121-18 Year of manufacture: 1999 The control system is S7. The strapping machine is equipped with 2 strapping heads. The press has a walk-in roller conveyor with a turnstile. Occupancy dimensions including pallet: Length: 1,200 mm Width: 1,200 mm Height min. 500 mm max. 1,600 mm Technical data: Continuously adjustable belt tension: 200 – 2,000 N Belt guide speed: 4.6 m/s Type of closure: friction weld closure Dimensions of the control panel: Width = 1,200 m, depth = 650 mm, height = 850 mm Dimensions of the packaging press: Todpoq Svgksfx Ahuof Max. clearance height: 1,600 mm Max. clearance width: 1,500 mm Length of the pressure plate: 1,600 mm Pressure force: up to max. 50,000 N selectable via potentiometer Belt guide distance: 440 mm Drive: via pole-changing Gear brake motor Rapid traverse speed: 150 mm/sec Pressing speed: 37 mm/sec Conveyor belt in the pressing area: Usable width: 1,500 mm Length: 2,100 mm

Condition: excellent (used), Schon 6005 B hydraulic cutting machine with returning hammer Robust German manufacture Pressing force: 70 Ton Working area: 2050mm x 850mm Max stroke: 160mm Weight: about 6500kg Machine in Perfect technical condition after full service Possibility of assistance in the organization of transport We invite you to our other auctions ! Cutting beam machine Schon 6005 B Solid German production Pressing force: 70 Tons Tedpfxorhik Ee Ahuef Working area: 2050mm x 850mm Max stroke: 160mm Weight: approx. 6500 kg The machine is in perfect technical condition after full service Possibility of assistance in organizing transport We invite you to our other auctions !!! Schon 6005 B Brückenstanze Solide deutsche Produktion Presskraft: 70 Tonnen Arbeitsbereich: 2050 mm x 850 mm Maximaler Hub: 160 mm Gewicht: ca. 6500 kg Die Maschine befindet sich nach vollständiger Wartung in einem einwandfreien technischen Zustand Möglichkeit der Unterstützung bei der Organisation des Transports Wir laden Sie zu unseren anderen Auktionen ein!!!