Used gantry milling machines for sale (151)

Condition: used, CNC CONTROL Controller: Hurco MAX5 AXES Number of controlled axes: 5 Kjdpoz Aqhbsfx Aiaedt Number of simultaneous axes: 5 X-axis travel mm: 3.200 Y-axis travel mm: 2.100 Z-axis travel mm: 900 B-axis degrees: C-axis degrees: ±360 Distance spindle nose - table surface mm: 66 - 966 Feed rates m/min: 10 / 10 / 10 Rapid traverse m/min: 15 / 15 / 10 WORKTABLE Table dimensions mm: 3.000 x 1.700 Number of T-slots: 7 T-slot width mm: 22 H8 T-slot spacing mm: 220 Max. table load kg: 11.000 SPINDLE Max. spindle speed rpm: 18.000 Spindle power kW (S1/S6): 45 / 63 Spindle torque Nm: 106 Spindle taper / interface: HSK63-A COOLING Coolant through spindle bar: 40 TOOL SYSTEM Tool holder / taper: HSK63-A Tool magazine capacity: 60 Max. tool diam. (free adj. places) mm: 76 Max. tool length mm: 300 Max. tool weight kg: 7

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm Kedpjr E D Eaefx Aiaodt 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Conveyor belt for removing the scrap metal Suction Ruwac Zone 22

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Specifications • Table clamping area: 6,000 × 3,000 mm • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed speed: 30,000 mm/min Kjdoxlip Ajpfx Aiasdt • Table load: 4,000 kg/m² • Max. spindle speed: 24,000 rpm • Max. spindle power (S1-100%): 42 kW • Max. spindle torque (S1-100%): 67 Nm • Tool holder: HSK63A • Tool changer: 24 positions • C-axis: ±360° • A-axis: +95° / -110°

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000, Year of manufacture 2010 / Commissioned 2011, Siemens 840 D control system, Travel distances X 10,000 mm, Y 1,500 mm, Increased spindle carriage stroke: Z 1,000 mm, Increased through-height 1,000 mm, Through-width 1,500 mm, Main drive 36 kW, n = 6,000 rpm, 720 Nm 2-stage gearbox 1:4 SK 50 tool holder Machining performance in C45: Full drilling D=120mm, threading M55, milling 100cm³/min Gantry design with movable portal bridge and stationary machine table. Machine table with clamping bars in the transverse direction, each with 750 mm spacing. The standard plate fields are omitted. Gantry-style machine Hydraulic clamping device with clamping bridges for machining shafts, including hydraulic system Angle drilling & milling head, n = 4,000 rpm, SK50 High accuracy and stability due to Hirth gearing Automatic tool change in the angle head Measuring probe RWP20.50-M Swinging operation Safety fence with light curtains, manufacturer Sick Machine table with clamping bars in the transverse direction, each 750 mm Kdodpfx Ajzua N Ssiajt Tool chain magazine on the portal stand with 30 positions Machine coolant system Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, adjustable in height by motor Partition wall with viewing panel Chip conveyor with hinged belt design Installation and alignment elements

Condition: used, Year of construction: 2014, functionality: fully functional, For sale is a Steelcut precision CNC gantry milling machine. The machine has been regularly serviced and is in excellent visual and technical condition. It is fully functional, inspected, and ready for immediate use. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in Mazak machines as well as other brands. We place great value on personalized support and are always happy to assist you even after your purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! Kjdpfx Aiexwa A Reaedt PS CNC Service Germany GmbH & Co. KG All details provided without guarantee.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 34,019 h, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, table length: 3,000 mm, table width: 1,500 mm, spindle speed (max.): 4,000 rpm, table load: 12,000 kg, overall weight: 50,000 kg, spindle motor power: 47,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 5, This 5-axis JOBS Jomach 241 gantry milling machine was manufactured in 1999. It features an impressive X-axis travel of 3,400 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 1,250 mm. The worktable size is 3,000 x 1,500 mm with a load capacity of 12,000 kg. If you are looking to get high-quality milling capabilities, consider the JOBS Jomach 241 machine we have for sale. Contact us for further details regarding this machine. Ksdpjzza Rcofx Aiasdt - Control System: Siemens Sinumerik 840D (Software version 3.7 MMc 103, JO'CAM NC-Steuerung)- Power On Hours: 91,055.12 h- Spindle Hours: 34,019.20 h- X Axis Travel (Longitudinal): 3,400 mm (+ 2,000 mm for pallet changers)- Y Axis Travel (Transversal): 2,500 mm- Z Axis Travel (Vertical): 1,250 mm- Distance Between Columns: 2,200 mm- C Axis (Twist Head - First Rotation): ±400°- A Axis (Twist Head - Second Rotation): 220° (±110°)- Linear Axes Min Position Step (X-Y-Z): 0.001 mm (0.00004 in) / 0.0005 mm- Angular Axes Min Position Step (C-A): 1° (6,000 Nm)- Linear Axes Speed (X-Y-Z): 5 to 16,000 mm/min- Angular Axes Speed (C/A): 50 / 30 deg/sec- Spindle Taper: HSK-A-63- Spindle Speed: 500–4,000 RPM- Spindle Motor Power S6 (S1): 25 kW / 17 kW (15 kW) / 20 kW / 18.5 kW (15 kW) / 47 kW (39 kW)- Spindle Motor Type: Siemens Type DMR .4.FFS- Twist Head Pivot Point: 250 mm- Worktable Size: 3,000 x 1,500 mm- Worktable Load Capacity: 12,000 kg- Pallet Size: 2,500 x 1,500 mm- Pallet Load Capacity: 8,000 kg- Tool Magazine Capacity: 16 / 32 positions (Chain type)- JO'TOOL Static Rack Capacity: 12 to 360 tools- Electric Power Supply: ~70 to 96 kVA- Three-Phase Power Supply: 380V - 50Hz / 480V - 60Hz- Basic Machine Weight: 50,000 kg- Machine Dimensions (Layout Ground Area): 11,000 mm x 7,000 mm / 11,200 mm x 6,400 mm- Compressed Air Pumps / Coolant Tank: Johnson (Sealing Material: Viton)- Optional Equipment & Accessories: Angle head, 2x fork heads, head magazine, 2x twist heads, quill with head, quill without head, 3-A head mount, complete replacement spindle, all new or repaired axis motors in stock, documentation comprising approx. 4 folders (including manuals, repair invoices, defect report from 2006 available) Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 2004, Ref. -No.: 10634 Manufacturer: ANAYAK Type: P 3200 Year of construction: 2004 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany X-Travel: 3200 mm Y-Travel: 1400 mm Z-Travel: 750 mm Table-Size (Lxw): 3200 x 1400 mm Kodjzx Nyzspfx Aiaedt spindle running time: 23.291 H Control: 83.301 H machine: 73.907 H Program run: 27.807 H

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 6,000 rpm, controller manufacturer: FANUC, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Vision Wide Vision gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,530 mm, and Z-axis travel of 750 mm. The spacious work table size of 2,000 × 1,530 mm makes it ideal for large, flat workpieces. If you are looking to get high-quality milling capabilities, consider the Vision Wide Vision gantry milling machine we have for sale. Contact us for further details. • Highlights: • Modern machine (2016) designed for low maintenance and easy integration into production lines • Large work envelope suitable for large, flat workpieces (mold making, aerospace, mechanical construction) Ksdpfjzqc A Tox Aiasdt Technical Specification Taper Size BT 50

Condition: like new (used), Year of construction: 2017, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, table length: 3,500 mm, table width: 1,750 mm, spindle speed (min.): 24,000 rpm, Heidenhain iTNC 530 control Main spindle HSK-A 63 Speeds: 1-24,000 rpm Tool changer for 50 tools Through-spindle cooling Kodpfow S T Iqjx Aiaedt 5-axis milling machine with simultaneous milling head (Gabelkopf)

Condition: good (used), Year of construction: 1995, operating hours: 43,499 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, 5-Axis Gantry Milling Machine WALDRICH Product manufactured on the machine: AIRBUS LANDING GEAR (aerospace) Year of construction: 1995; Delivery year: 1998 Installation & Commissioning: 1999 Operating period: 03/1999 to 07/2022 (21 years) Condition: Very Good Customer Specifications / History Previous owner (1999–2022): German aerospace group Technical Specifications Travel Distances & Working Area X-axis (longitudinal table travel): 4,000 mm Y-axis (cross-slide traverse): 2,500 mm Z-axis (vertical ram travel): 1,000 mm Clearance between columns: 2,000 mm C-axis: 360,000 positions (increment 0.001°) B-axis: 360,000 positions Tables & Pallets Number of tables: 2 Table dimensions: 1,500 x 3,000 mm Table height above floor: 740 mm Max. table load: 12,000 kg Feed & Rapid Traverses X/Y/Z: Feed 0–6,000 mm/min, rapid traverse 15,000 mm/min B-axis nutator: 0–3,600 deg/min C-axis nutator: 0–3,600 deg/min Feed Forces / Torque X/Y/Z max.: 30 kN each C-axis detachable torque: max. 20,000 Nm C-axis bearing control: max. 4,000 Nm Speed range Stage I: 20–875 rpm Stage II: 876–4,000 rpm Spindle Drive Power: 50 kW Speed range: 20–4,000 rpm Tool Change System Type: Chain magazine Capacity: 120 tools Tool holder: ISO 50 Max. tool diameter: 315 mm Tool diameter at full occupancy: 100 mm Max. tool length: 550 mm Max. tool weight per gripper: 35 kg Spindle Units / Distances Vertical spindle unit: Spindle nose – table surface 250–1,250 mm Horizontal spindle unit: Spindle center – table surface 150–1,150 mm Nutator (MC303): Spindle center – table surface 45–1,045 mm Coolant & Lubrication Coolant supply: internal and external available Lubrication: automatic (spindle bearings and gearbox) Dimensions & Weight Machine dimensions (approx.): Length: 14,700 mm Width: 10,000 mm Height above floor: 6,079 mm Total machine weight (approx.): 72,500 kg Machine bed: 8,500 kg Machine table & pallet: 16,000 kg 2 columns: 10,200 kg Crossbeam with platform: 20,000 kg Special Features & Accessories Fully automatic tool changer (ATC): 120 stations (ISO 50) Fully automatic head changer incl. universal milling heads Milling head: C-axis: 360,000 x 0.001° B-axis: 360,000° Accessories: 3 chip conveyors Toolbox + pallets with loose accessories Packing List (Transport Dimensions) Axes: 8,950 x 1,700 x H 1,000 mm 2 tables: 3,300 x 1,700 x H 340 mm Tool changer with carriage: 3,500 x 2,300 x H 2,670 mm Tool changer without carriage: 4,450 x 1,060 x H 1,870 mm Kdodpfox Hxdzsx Aiast Pick-up heads: 3,000 x 470 x H 2,200 mm Crossbeam: 7,000 x 2,000 x H 2,500 mm 2 support columns: 2,900 x 1,000 x H 1,500 mm Carriage with RAM: 3,450 x 1,800 x H 2,100 mm Chain section: 3,700 x 2,000 x H 1,100 mm Electrical cabinet No. 1: 5,400 x 600 x H 2,000 mm Electrical cabinet No. 2: 2,100 x 650 x H 2,000 mm Chip conveyor: 5,000 x 500 x H 2,300 mm Head: 900 x 600 x H 700 mm Tool case: 2,100 x 1,200 x H 600 mm 7 pallets with loose accessories This WALDRICH SIEGEN 5-axis portal milling machine is ideally suited for machining steel, cast iron and non-ferrous metals. The combination of a 50 kW spindle drive, automatic tool changer (120 stations), fully automatic head changer, and high-precision B/C axis positioning (0.001°) makes it the ideal solution for demanding and complex manufacturing tasks.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Control: Heidenhain TNC 430 Kdedpfxsyaazmj Aiaot X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. In 2020, the milling gearbox was renewed.

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,000 mm, X-axis: 13.000 mm Y-axis: 4.500 mm Z-axis: 1.000 mm Distance between columns: 6.500 mm C-axis: 190º A-axis: 110º Positioning speed XYZ: 15.000 mm/min. Positioning speed AC: 10 tpm CNC Controller: Siemens 840D Spindle nose: HSK A63 Spindle speed: 30.000 rpm Spindle power: 20 kW Toolchanger: 20 Pockets Torrestool tables: 16x X-axis: 11.500 mm Kdodezkmqnspfx Aiast Y-axis: 3.500 mm Z-axis: 750 mm Country of origin: Spain Machine size LxWxH: 19.000 x 11.000 x 6770 mm Machine weight: 70.000 kg Originally installed in an Airbus production facility and used for precision trimming and milling of aircraft fuselage window openings. The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed to work on aeronautical materials (Composite, Aluminum, Titanium, Steel, ...). The Torresmill gantry is perfectly combined with the Torrestool universal clamping device, guaranteeing flexibility and process time.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 100 mm, spindle speed (max.): 50,000 rpm, spindle motor power: 3,600 W, number of axes: 3, This 3-axis DELTA LGT2113 PRO gantry milling machine was manufactured in 2016. It features a working area of 2100 mm in the X-axis and 1300 mm in the Y-axis, equipped with a powerful 3.6 kW spindle capable of reaching 50,000 rpm. The machine includes a 12-position automatic tool changer and a 4-zone vacuum table, making it suitable for various milling and specialized cutting applications. If you are looking to get high-quality milling capabilities, consider the DELTA LGT2113 PRO machine we have for sale. Contact us for further details. • Tool taper: HSK 25 • Number of tool slots: 12-position automatic tool changer. • Main electronic connection: 380 V, 50/60 Hz • Pump drive power: 5.5 kW each • Gantry-type CNC milling machine • Italian-made machine • 4-zone vacuum table • Designed for specialized industrial applications, especially for the production of tooling used in the printing industry • Also suited for a wide range of general milling operations • X and Y axes: Rack and pinion drive • Z axis: Ball screw drive • Automatic centralized lubrication system Kdjdpfxszk Ipxs Aiast • Liquid-cooled spindle • The spindle was completely overhauled a few months ago, including bearing replacement, and is currently in excellent working condition • Integrated Blum tool measurement system with optical transmitter/receiver (probe not included) • 2 vacuum pumps • Capacity: 250 m³/h each • Power supply for vacuum system: 230/400 V, 50 Hz • Windows 10 operating system • Proprietary 2.5D control software • Deltacam CAM software • 17” TFT display • Dust extraction system (vacuum cleaner not included) • Oscillating knife head for precise cutting of rubber, foam and similar materials, allowing the machine to perform both milling and specialized cutting applications • Minimum Quantity Lubrication (MQL) system for improved machining performance and extended tool life • The machine is currently under power and can be inspected in operation • It is no longer fully utilized, which is the reason for its sale • The machine is in good technical condition and the recently refurbished spindle is operating flawlessly

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 650 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 18,000 rpm, table load: 4,000 kg, spindle motor power: 30,000 W, number of slots in tool magazine: 40, number of axes: 5, This 5-axis Huron K2X 8 Five gantry milling machine was manufactured in 2006. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 1,100 mm. The machine includes a robust table size of 2,300 × 1,500 mm and a maximum table load of 4,000 kg. If you are looking to get high-quality milling capabilities, consider the Huron K2X 8 Five machine we have for sale. Contact us for further details. • Simultaneous 5-axis machining • Rotary axis (B): ±110° • Rotary table axis (C): 360° continuous • Table size: 2,300 × 1,500 mm • Spindle taper: HSK-A63 • Through-spindle coolant Additional equipment • Chip conveyor Kdjdjzd Epijpfx Aiajt • Portable MPG handwheel

Condition: used, Year of construction: 1965, Dimensions (L/W/H) 10460,0 × 5715,0 × 5537 mm spindle head adjustment horizontal 3160 mm Kjdpfeuh E Tbsx Aiasdt spindle head adjustment vertikal 1000 mm hobbing length 2250 mm weight of the machine ca. ca. 76660 kg t

Condition: used, Portal milling machine Vision Wide VF4000. 2-axis milling head (1-degree C-axis and 1-degree B-axis) with position determination encoder, SK50. VTEC VF4000 Dimensions: X-axis: 4200 Y-axis: 2300 Z-axis: 1020 Tool magazine: 40 tools Control system: Siemens 840D SL Kdodpfx Aijzxxgdjaet

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, table length: 2,100 mm, table width: 1,100 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, Equipment: rotational speed infinitely variable, CNC Gantry Milling Machine Gualdoni GDV-400 – Year 2018 – Fully Functional – Turin (TO) Gualdoni GDV-400 CNC gantry milling machine, year 2018, in good condition and fully operational. Fixed gantry structure with longitudinal moving table, ideal for machining large workpieces. Available for inspection and testing by appointment in Turin. Main technical data: - X-axis travel (longitudinal): 2,000 mm - Y-axis travel (cross): 1,100 mm - Z-axis travel (vertical): 900 mm - Table dimensions: 1,100 × 2,100 mm - Installed power: approx. 45 kW - Spindle speed: 100 – 10,000 rpm (stepless adjustment) - Tool holder interface: ISO 40 (DIN 69871) - Rapid traverse X/Y/Z: 20,000 / 20,000 / 20,000 mm/min - Feed rates: 10 – 5,000 mm/min - ATC tool magazine: 24 positions – 4 sec tool change - Max tool diameter: 106 mm | Max length: 300 mm - CNC control: FAGOR (ISO + conversational) - 3 controlled axes: X – Y – Z - Machine footprint: 7,500 × 3,000 × h 3,800 mm Kodpfoy A Tuyjx Aiaodt - CE compliant | Year: 2018

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Kdodeyrc Akepfx Aiajt Control system: Fidia X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Available at extra charge: - Wireless touch probe - BLUM laser Condition of the machine Fully operational, very good condition. Can be inspected under power.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 780 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, tool weight: 15,000 g, spindle motor power: 22,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis HARTFORD Infinity HSA-2215AD gantry milling machine was manufactured in 2007. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 780 mm. The machine includes a robust table size of 2,200 x 1,400 mm and a maximum table load of 6,000 kg. If you are looking to get high-quality milling capabilities, consider the HARTFORD Infinity HSA-2215AD machine we have for sale. Contact us for further details. • Distance between columns: 1,700 mm • Spindle nose to table: 200 – 980 mm • Table • Size (X × Y): 2,200 × 1,400 mm • T-slots: 22 mm × 9 × 150 mm • Spindle & Drive • Taper: BBT-50 / ISO-50 • Speed: 6,000 rpm (gearhead) / 8,000–10,000 rpm (direct drive optional) • Motor power: 18.5 / 22 kW (continuous / 30 min) • Feed rates • Rapid (X / Y / Z): 20 / 20 / 15 m/min • Cutting feed: 1 – 10,000 mm/min • ATC • Tool magazine: 32 tools (optional 40 / 60) • Max tool diameter: 125 mm (215 mm without adjacent tools) • Max tool length: 350 mm Kjdpfx Aiozqcw Rjaedt Technical Specification Taper Size ISO 50

Condition: excellent (used), Year of construction: 1994, operating hours: 1,930 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 4,200 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total length: 15,000 mm, table length: 5,000 mm, total width: 15,000 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, total height: 7,500 mm, table height: 1,350 mm, distance between stands: 3,500 mm, type of input current: AC, table load: 65,000 kg, workpiece weight (max.): 65,000 kg, distance table center to spindle nose: 2,300 mm, overall weight: 210,000 kg, spindle motor power: 50,000 W, MACHINE DATA Machine type: Portal milling machine - double column for continuous 5 axis operation Manufacturer: WALDRICH COBURG Model: 15 S - 10 FPF 300 NC Year of construction: 1994 Condition: Fully refurbished 2015 Functionality: fully functional Operating hours: 2,931 h TECHNICAL DETAILS Number of controlled axes: 5 travel distance X-axis: 7,200 mm travel distance Y-axis: 4,200 mm travel distance Z-axis: 1,750 mm spindle speed (max.): 4,000 rpm working width: 3,500 mm PROVISION Machine location: Ljubljana, Slovenia Availability: now Delivery conditions: FCA Pick up at location: Ljubljana Shipping costs: upon request Planer-milling machine - double column: completely overhauled in 2014 / 2015 by Waldrich Coburg (basically everything except the casting): > New control unit > New cables > New motors > New electrics > Guideways overhauled DESCRIPTION - Heavy double-column machine for processing complex shapes - 2 pallet stations with 2 pallets (load capacity 65t each) - Machine with CNC control SIEMENS 840D sl - In 2014, conversion of the control system to SIEMENS 840D sl (incl. complete cabling and control cabinet) - in 2015 replacement of all axis motors - Various angle milling heads - NC-controlled milling head with 50 kW milling power / clamping 2.5° each with Hirth serration (type USP300C450F15S) - 2-axis NC-controlled fork head with 40 kW milling power (type UFN00SZ500) - Automatic tool changer for 76 tools (ISO 50 and 60) TECHNICAL DETAILS Travel X / Y / Z: 7,200 / 4,200 / 1,750 mm Milling width: 3,500 mm Distance spindle nose to table: 2,300 mm Milling power: 50 kW Speed: 10 - 4,000 rpm Front spindle diameter: 150 mm Spindle holder: ISO 60, ISO50 Control: Siemens 840D sl Pallet size: 3,000 x 5,000 mm Pallet load: max. 65 t Number of pallets: 2 pieces Tool changer: 76 slots Feed rate: 10 - 15,000 mm/min MACHINE DETAILS Pick-up power: 92 kW Weight: 210 t Spindle hours: 2,931 h Switch-on time: 10,870 h Bed dimensions: 12.5 x 2.3 x 0.78 m; 28.5 t Pallet dimensions: 5.35 x 3.0 x 0.4 m; 22 t Main pallet carrier dimensions: 5.1 x 2.9 x 0.5 m; 25 t Dimensions of bed section: 3.8 x 2.9 x 0.5 m; 10 t Milling spindle box dimensions: 4.1 x 1.9 x 1.5 m; 13.5 t Kjdpfx Aisvv N I Rjaedt Left/right column dimensions: 4.1 x 1.3 x 1.7 m; 10.5 t Exhaust air slide dimensions: 8.5 x 0.7 x 1.2 m; 1.1 t Control cabinet dimensions: 7.9 x 0.6 x 2.1 m; 2.8t THIS IS A TOP CLASS MACHINE FOR MOST ACCURATE WORK; HIGHLY EFFECTIVE. MACHINE IS ASSEMBLED AND UNDER POWER:

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle Kdedpfx Aijyv In Ijaet • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Condition: excellent (used), Year of construction: 2014, x-travel 2500 mm Kdedpfx Aiezak Hgeajt y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC530 spindle turning speed - stepless 22000 U/min c-axis +-300° milling-head swivable +/- +-110° tool taper HSK 63 A tool change unit 50 Pos. total power requirement 130 kW weight of the machine ca. 53,5 t dimensions of the machine ca. 7,6 x 7,3 x 5,7 m This ZIMMERMANN FZ33c is available immediately and in good condition. - NEW spindle received 6 months ago Description: Technical specifications of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° Includes vibration sensor Includes bearing temperature sensor Includes rotary joint for internal tool magazine feed (IKZ) 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15” TFT colour display Extraction system LTA Industrial Air Cleaning Machine room canopy 50-position tool changer, chain magazine, behind the machine Chip conveyor, ejection 60° to the left, front-facing No probe available!!! Blum Laser tool measurement ‘Control NT-Micro’ Clamping table Length x width x height 2500 x 3250 x 400 mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged longitudinally 18H12 T-slot spacing 250 mm Dimensions, weights Footprint (excluding peripheral equipment) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection data Voltage (three-phase) 400 V Frequency 50 Hz Compressed air connection (to be provided by customer) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine configuration) Linear axis drives Feed rate X, Y, Z axes 60 m/min Axis acceleration X, Y, Z axes up to 5 m/s² Rotary axis drives – VH30 Feed rate A- and C-axis 360 °/s Axis acceleration A- and C-axis 700 °/s² Resolution A- and C-axis 0.0001 Accuracies of linear axes – in accordance with VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0.028 mm Z-axis P= 0.020 mm Repeatability X-axis Ps= 0.015 mm Y-axis Ps= 0.016 mm Z-axis Ps= 0.010 mm Resolution of measuring systems (interpol) A-, C-axis 0.0001° Accuracy of rotary axes – VH30 Positioning accuracy A- and C-axis P= 12" = 0.0033° Repeatability A- and C-axis Ps= 8" = 0.0022° VH30 milling head 2-axis milling head: VH30, Siemens Weiss milling spindle Spindle power S1 (100% duty cycle) 60 kW, Spindle speed 22,000 rpm, 95 Nm, HSK-A63 External dimensions of fork head L x W approx. 500 x 600 mm Nominal torque of rotary axes Control loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Continuous grease lubrication with automatic relubrication system) Swivel axis – spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool unclamping Hydraulic Permissible tool weight 4.5 kg (manufacturer’s specification) Coolant supply External and internal Coolant/lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar, Air blow at the front of the milling spindle

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. handwheel HR420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ± 360° Maximum workpiece size 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) Can be machined in 5 axes (90° free A-axis) in a single setup using a 300 mm long tool. Machine operating hours: approx. 83,000 h Total spindle hours: approx. 37,000 h Machine bed (can be installed flush or above ground!) Dimensions: 5,000 x 2,250 x 300 mm - manufactured from EN-GJL-250 9 T-slots according to DIN 650-28H12 with a spacing of 250 mm and 125 mm from the edge 2-axis milling head, inspected by the manufacturer! Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drive system for linear axes Feed rate X, Y, and Z axes: up to 65 m/min Axis acceleration X, Y, and Z axes: up to 5 m/s2 Connection data Voltage: 400 V Frequency: 50 Hz Power consumption: 130 kW Dimensions, weights Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL color 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area cover Condition of the machine The milling head has been freshly inspected by the machine manufacturer, thus partially overhauled and fully functional. Completely new machine bed from Stolle! The additional modules shown on the machine bed are not included in the scope of delivery. The extraction systems and ducts shown are also not included in the scope of delivery. The previous owner was an established Formula 1 team from Central Europe. Kdedpfxezkuirs Aiaet The machine was always under a maintenance contract with the manufacturer. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: used, Year of construction: 1987, functionality: fully functional, Angle milling head - Manufacturer: Waldrich Siegen - Model: ET500 - Order no.: 11290/731 Kdedjrfw R Hspfx Aiaot

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity Kedpfx Ajzb Evlsiasdt