5-axis gantry milling machine

Heyligenstaedt Heynumill 2700-PF

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power Nwodoxwdygepfx Aaasf X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you the following: Manufacturer: DMG Mori Model: CMX 50 U Year of manufacture: 2019 Control unit: Slimline Siemens Operate Travel distances: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 to +110 ° C-axis: 360 ° Main spindle: Tool holder: SK 40 Spindle speed range: 20 - 12,000 rpm Main spindle drive power (100/40%): 13 / 9 kW Working table: Table size: D 630 x 500 mm Tool changer: Number of tool pockets: 30 positions Rapid traverse rates: Rapid traverse (X/Y/Z): 30 m/min Operating hours: approx. 7,070 h Spindle hours: approx. 2,800 h Technical features & accessories: - Direct linear measuring system in x, y, and z axes, including air purge - Air blow switching via M function - Production package, consisting of: - Internal coolant supply 12 bar - Chip conveyor, 250 l tank - Bed flushing via M function Njdpfoywlkcox Aaaswf - Coolant spray gun - Machine enclosure roof - 4-color signal lamp - Renishaw measuring kit, consisting of: - Touch probe PP40 - Tool measurement TS27R - Tool breakage monitoring - Calibration tool - Preparation for 3DquickSET Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. Technical data and specifications are subject to change and errors. Prior sale reserved!

Condition: used, Year of construction: 2013, x-travel 1.135 mm y-travel 1.050 mm z-travel 750 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 19 kW max. Torque 100 Nm tool taper HSK-A 63 table surface area 1.400 x 1.050 mm max. table load 2.500 kg max. workpiece sizes 1.400 x 1.240 mm max. workpiece height 750 mm number of toolpositions 30 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 365 / 395 mm max. tool weight 8,0 kg change-time chip to chip 6,1 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Accelaration 6 m/s² Feed force ( X / Y / Z ) 14 / 20 / 14 kN total power requirement 44 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 6,0 x 5,0 x 3,3 m CNC - MachiningCenter Vertical DMG MORI SEIKI - DMU 105 monoBLOCK - Spindle hours: approx. 9,518 h - Production package: (Chip conveyor, 600 l coolant system, paper belt filter, internal coolant supply 40 bar / 23 l/min through spindle center) Nwjdpjyztyaofx Aaaef - Air Clear: Air curtain for viewing window

Condition: ready for operation (used), Year of construction: 2016, operating hours: 12,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,376 mm, table load: 2,500 kg, overall weight: 16,300 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 33,000 W, tool weight: 8,000 g, product length (max.): 5,480 mm, number of axes: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016, featuring a robust vertical machining center with a table width of 3,500 mm and length of 820 mm. It boasts a maximum speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine includes a 30-position tool changer and can handle a maximum tool weight of 8 kgf. Consider the opportunity to buy this Mazak VTC 800/30 SR vertical machining center. Contact us for more information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table top: 140 mm Nwedpfex Nkp Uex Aaasf • Max. distance spindle nose to table top: 860 mm • Work spindle • tool holder HSK63 • has a capacity for 155 tools with HSK63 mounts • Feed rates • Rapid traverse speed X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • With adjacent positions occupied: 80 mm • With adjacent positions free: 130 mm • Total weight of all magazine tools: 150 kgf • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Connection frequency: 50/60 +1 Hz • Air pressure: 5–9 bar • Air flow rate: 260 l/min • Tank capacity: 500 L • Machine Status / Usage • Spindle hours: 12 000 Additional equipment • AirFresh FMN V12 extraction system (installed on both sides and connected to a door sensor) • Mounting bracket for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetting devices • Licence options: ShopMill Sinumerik 5-axis milling 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Linear axis shifter motor • Rotary axis shifter motor • Cylinder for swivel unit

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor - coolant tank - immediately available Njdpov S Svvjfx Aaaowf

Condition: good (used), Year of construction: 2017, operating hours: 8,800 h, functionality: fully functional, machine/vehicle number: NL2561708843, number of spindles: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities: Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length max. (mm): 705 Turning diameter max. (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Nwsdeyzxcgspfx Aaaof Bar working capacity (mm): 80 Tool Magazine: Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5 / 4.9 / 4.2 (3 min / 5 min / continuous) Rapid traverse (m/min): 30 Main Spindle: Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5 / 18.5 / 15 (25% duty cycle / 50% duty cycle / continuous) Max. torque (Nm): 49 Sub-Spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11 / 7.5 (25% duty cycle / continuous) Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System: Tank capacity (liters): 366 Equipment: Chip conveyor Signal tower Machine operating hours: Power on hours: 19,393 Cutting time: 8,800 Rated power requirement (kVA): 48 Basic machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 The depicted tools, driven tools, and both chucks are not included in the scope of delivery.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) Njdow Ty S Sepfx Aaaowf - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: excellent (used), Year of construction: 2022, operating hours: 1,900 h, functionality: fully functional, DMG Mori CMX70U No. 001240A Year: 2022 Weight: 7,800 kg Spindle hours: approx. 1,900 (only plastic or aluminium has been machined!) Control: DMG Mori Slimline Nsdpfsyzb Ifox Aaaowf incl. Bürener coolant preparation system incl. 3 x Kesel machine vices incl. 50 x SK40 tool holders Available from 20.04.2026!

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, FPT Industrie S.p.A. – Travelling Column / Gantry Milling Machine Model: DINOSPIN Year of manufacture: 2019 Serial number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine weight: 44,280 kg Control: Heidenhain TNC640 (15") RAM: 4 GB Hard drive: 32 GB (min. 21 GB program storage) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block processing time: 0.5 ms Handwheel: Heidenhain HR510 (remote handwheel) Universal milling head (5-axis machining, continuous movement on 2 axes) Max. spindle speed: 18,000 rpm Swivel range C: ±270° Swivel range A: ±185° Max. rotation speed A/C: 30 rpm Working torque A/C: 450 Nm Clamping torque axes: 1,400 Nm Positioning uncertainty: 8 arcsec / scatter: 4 arcsec (VDI/DGQ 3441) Spindle power (S1/S6): 22/33 kW Spindle torque (S1/S6): 84/128 Nm Continuous operation, constant power: 2,500–18,000 rpm Continuous operation, constant torque: 10–2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool changer (overlapped-wheel system with tool-change arm) Magazine capacity: 80 tools Max. tool diameter: 75 mm Max. tool diameter with adjacent pocket free: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm (for 40 tools) Max. tool length: 250 mm (for 40 tools) Tool type: HSK-A63 DIN 69893 Nedpfeyrndmsx Aaajwf Measuring systems Laser tool setter: tool length/radius + tool breakage control (software included) Probe for workpiece measurement/alignment: wireless transmission, probing cycles included in CNC Monitoring Sensor for vibration/collision detection: response time approx. 1 ms Coolant system external/internal (LEU/LEIUHP) Tank capacity: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External cooling: max. 30 l/min, max. 10 bar Through-spindle coolant (IKZ): max. 30 l/min, max. 70 bar Additional options/functions External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm

Condition: reconditioned (used), Year of construction: 2016, With Siemens 840 D sl Operate CNC control system Year of manufacture: 2016 Travel ranges: X 400 / Y 400 / Z 375 mm Spindle speed range: 20 – 20,000 rpm, stepless Including the following accessories: - NC rotary tilting table 450 mm x 400 mm incl. table cooling - 60-position tool changer with double gripper (HSK 63) - 50 pcs. HSK 63 tool holders - 3D Renishaw measuring probe - Electronic handwheel - Lang zero-point clamping system with vices - ICS 40 bar with paper band filter - Scraper belt chip conveyor - Bed flushing - Active cooling unit for control cabinet - Spindle cooling: water circulation - Rotoclear - Chip washdown gun - Direct path measuring system Nwjdpfx Aoylpa Noaasf - Air blast through spindle center - 3 height-adjustable machine feet - Operating manuals