Drilling machines

ERLO Iberdrill AZ 34

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Bedoharwvjpfx Afmelp Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation Blodpozguumofx Afmep - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Bledpfxetzctms Afmep Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: new, Precision, quiet, and reliable drill press. Built according to strict safety standards. Precision spindle with hardened Morse taper and machined base plate. Electronic speed control included. Rotating table + vise, 350 x 250 mm. Drilling capacity in steel: R50 mm, ø 22. Tapping capacity in steel: R50 mm, M14. Spindle taper: CM2. Spindle stroke: 90 mm. Blsdpeir Aihsfx Afmop Spindle bore diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU transmission. Electronic speed control (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V, single-phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Year of manufacture: 1995 Condition: Good, operational condition TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES Bljdpfxjydk Aco Afmep  Angle stop with ruler  Double-edged blades  Foot switch  Documentation

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller Bedpfx Aortrvyefmslp 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Grinding Wheel Dressing Machine: Easy to Operate, Robust, and Precise Blsdpfx Afeubbrtsmop Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of easy operation and exceptional stability. The solid granite bed ensures the highest precision and durability, while the user-friendly operation maximizes efficiency in your workshop. While you continue production on your tool grinding machine, our dressing machine saves you time and, therefore, money. Ideal for those who value reliable performance and top value for money!

Condition: excellent (used), Year of construction: 2011, operating hours: 29,000 h, functionality: fully functional, Weiler E40 Precision Lathe Manufacturer: Weiler Type: E40 Year of Manufacture: 2011 Condition: Used, operational, ready for demonstration Operating Hours: 29,000 h Scope of Supply: Blodjztypvepfx Afmsp - Documentation - Machine feet - Coolant system - Machine lamp - Full chuck jaws - Half chuck jaws - 3-jaw chuck - 4-jaw chuck - 4-position automatic tool changer incl. 4 tool holders - MultiFix tool changer

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Blsdpfx Ajxfrv Eofmjp Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Year of construction: 2022, operating hours: 0 h, condition: new, Carrier weight: 20-33 tons Operating weight: 1800 kg Oil flow rate: 130-180 l/min Oil pressure: 150-170 bar Chisel diameter: 140 mm Impact frequency, Auto Start / Auto Stop mode: 400-800 bpm Sound power level: 120 db(A) Bedpfx Afoiwxnvemolp