CNC SAWING / DRILLING LINE

Danobat UT4 104.CPI

Year of construction: 2016, condition: excellent (used), Voortman V808 CNC Beam Coping Line – Year 2016 (REF: STK‐1549) Isdpfxelff H Ej Aa Eeik Coping Robot | Automatic in‐feed & out‐feed | 1.25m Sections | Roller Feed Kjellberg SmartFocus 300A Plasma Unit | Donaldson Extraction System

Condition: good (used), Year of construction: 2017, APK 81 Iisdpfstddwuox Aa Ejk Shaft 80MM digital hydraulic side rolls in very good condition

Year of construction: 2024, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning Iedpjidlpijfx Aa Eeik • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Iiodpfshvml Ijx Aa Eek Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Iedpfx Aefg E Hnea Ejik Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-230047, The FICEP Tipo G31 sheet metal processing center for the economical processing of sheet steel and flat steel in steel construction and the steel trade. The Ficep Tipo G31 LG can drill, center punch, thread, countersink, mark, mill, oxy-fuel cut and plasma cut flat steel or sheet metal with a maximum sheet width of 3,100 mm and a sheet length of 14,000 mm in a single system. Iiedpfxjrr Sqls Aa Eok The CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. 2 tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changes. The system is suitable for sheet sizes: Sheet width: minimum 200 mm, maximum 3100 mm; sheet length: minimum 2500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma source is available for plasma cutting. The system also has an oxyfuel cutting unit for thick material thicknesses. The drilling unit with a high torque and a spindle speed of up to 6,000 rpm is designed for drilling with carbide tools such as solid carbide drills, Nenok Multiplex interchangeable insert tools as well as for use with HSS coolant channel drills with a drilling diameter of 10 mm to 40 mm. The Ficep Tipo G31 machine is in very good condition and has only a few operating hours.

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Model: RIW 6,3 Machine No: 2751 Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be Iisdsiw Dlkjpfx Aa Ejk supplied on request. The machine is ready for demonstration under power in our warehouse.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: Iijdshzbipjpfx Aa Eok 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps Iedpfx Aof Sqckoa Eoik - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Year of construction: 1985, condition: ready for operation (used), Table dimension: 1435x460mm, T-groove number/ width/ distance: 5/ 16/ 80mm, controls: TNCi-120, length: 1435mm, width: 2330mm, height: 1648mm, weight: 3,1t, with documentation, accessories are available, no defects known, an inspection is possible. Iisdpfx Aaolbmups Eek