Used Zerma Granulator for sale (50)

Condition: like new (used), “Pallmann PS 4-7,5 F – Granulator / Roll Crusher” for Sale Find our complete stock on our website. Crsdjglvv Uepfx Ahuji Manufacturer: Pallmann Type: PS 4 – 7,5 F Mach. No.: 2264036 Electrical Motor: 75 kW Included Included frame. Shredder will be overhauled, sandblasted and painted.

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces The best features of the proven GST and GSC series have been integrated into a compact redesign, with particular emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths of 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material feed and prevents material jams. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine to reduce maintenance downtime. 98T8Mrx The highly tangential, curved rear wall of the cutting chamber combined with the aggressive open rotor design ensures reliable material intake and minimizes the risk of blockages. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling voluminous parts such as bottles, canisters and crates. Due to the low feed height, the machines can be easily fed with material by hand or a small conveyor belt. The low noise emission and small footprint make the granulator the perfect solution for inline shredding Optional rear wall with higher stator knife M version: The feed method with a higher stator blade is better suited for thicker-walled and more compact parts, such as injection-molded parts, profiles, sheets, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high-quality regrind is achieved regardless of the material type or shape, e.g. injection molded parts, profiles, plates, etc. Control system and control cabinet: The integrated control and control panel not only complies with all applicable safety regulations, but can also be adapted to specific requirements. In addition, peripheral equipment such as feed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available, which reduces power consumption during idle times and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 cyclone Rotor diameter (mm) 250 Rotor width (mm) 450 Drive (kW) 7.5 Cjdpjum Rnvjfx Ahujri Number of rotor blades 3 x 2 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 700 Feed opening (mm) 380 x 450 Opening feed option of the M version (mm) 295 x 450

Condition: like new (used), Year of construction: 2022, operating hours: 150 h, functionality: fully functional, machine/vehicle number: #12350, Plastic granulator GSH 700/1000 with production 800 kg/h Crsdpfjvdkpxex Ahuei

Year of construction: 2025, condition: new, Size reduction of large-volume blow molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths from 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, the rotor and stator knives are adjustable outside the machine, reducing downtime for maintenance. The highly tangential, curved rear wall of the cutting chamber, combined with the aggressive open rotor design, ensures reliable material pickup and minimizes the risk of jams. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling e.g. voluminous parts such as bottles, canisters, crates. Due to the low feeding height, the machines can be easily fed with material by hand or by a small conveyor belt. The low noise emission and the small footprint make the granulator a perfect solution for inline size reduction Optional rear panel with higher stator knife M version: The feed method with a higher positioned stator knife is better suited for thicker walled and more compact parts, such as injection molded parts, profiles, plates, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high quality regrind is obtained regardless of the material type or shape, such as injection molded parts, profiles, plates, etc. Control system and control panel: The integrated control system and control panel not only comply with all applicable safety regulations, but can also be customized to meet specific requirements. In addition, peripheral equipment such as infeed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available that reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 er cyclone Rotor diameter (mm) 250 Rotor width (mm) 300 Drive (kW) 7.5 Number of rotor blades 3 x 1 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 950 Feed opening (mm) 380 x 300 Csdpfsp Sr Anox Ahujri Feed opening option of M version (mm) 295 x 300

Year of construction: 2025, condition: new, Size reduction of large-volume blow molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths from 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, the rotor and stator knives are adjustable outside the machine, reducing downtime for maintenance. The highly tangential, curved rear wall of the cutting chamber, combined with the aggressive open rotor design, ensures reliable material pickup and minimizes the risk of jams. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling e.g. voluminous parts such as bottles, canisters, crates. Due to the low feeding height, the machines can be easily fed with material by hand or by a small conveyor belt. The low noise emission and the small footprint make the granulator a perfect solution for inline size reduction Optional rear panel with higher stator knife M version: The feed method with a higher positioned stator knife is better suited for thicker walled and more compact parts, such as injection molded parts, profiles, plates, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high quality regrind is obtained regardless of the material type or shape, such as injection molded parts, profiles, plates, etc. Cedep Sr Iaepfx Ahujri Control system and control panel: The integrated control system and control panel not only comply with all applicable safety regulations, but can also be customized to meet specific requirements. In addition, peripheral equipment such as infeed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available that reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 er cyclone Rotor diameter (mm) 250 Rotor width (mm) 600 Drive (kW) 11 Number of rotor blades 3 x 2 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 1450 Feed opening (mm) 380 x 600 Feed opening option of M version (mm) 295 x 600

Year of construction: 2025, condition: new, Direct driven staggered rotor Special knife design makes adjustment unnecessary Easy access for maintenance and cleaning Slow rotor speed creates less noise and dust Easily customizable to suit different applications Rotor diameter (mm) 300 Rotor width (mm) 800 Rotor speed (rpm) 150 Drive capacity (kW) 18.5 Rotor knives (pcs) 66 Stator blades (rows) 2 Coden Hqv Djpfx Ahuori Screen size (mm) > 6 Weight approx. (kg) 1100

Year of construction: 2025, condition: new, GSL - Slow speed granulator GSL 300 Rotor diameter (mm) 300 Rotor width (mm) 600 Rotor speed (rpm) 150 Drive capacity (kW) 11 Rotor knives (pcs) 48 Stator blades (rows) 2 Screen size (mm) > 6 Weight approx. (kg) 950 The slow speed granulators in the GSL range are mainly used in injection and blow molding processes as beside the press machines to grind runners and sprues. The machines can be used for rejected products in the inline recycling process as well. Different hopper and base frame designs make it possible to integrate the machine with most types of injection molding machines and robots. Driven by gear motor Unique knife design eliminates adjustment after resharpening. Simple tool less access for maintenance and cleaning Codpfx Ahei Hpf Nsujri Customizable hopper and base frame The slow speed granulators in the GSL 300 range feature a staggered 300 mm diameter rotor with widths ranging from 400 to 800 mm. The rotor is directly driven by a geared motor. The low rotor speed reduces the noise level of the machine and creates less dust while grinding. The special design knives of the GSL series can be sharpened easily and do not need adjustment afterwards. The material is fed via a sound absorbing feed hopper that can be tailored to fit various applications and feeding ways. Depending on the requirements the machines can be fitted with a wide variety of hoppers, they are mounted on either low or high level base frames with matching suction bins or bag filling adapters. Quick snap fasteners and hand screws make access to the machine for cleaning and maintenance fast and easy. Applications The GSL slow speed granulators of the 300 series are mainly used in injection and blow molding processes as beside the press machines to grind runners and sprues. But they can be used as low noise central granulators for small throughput requirements as well. The stronger design of the 300 series GSLs allow them to be used for stronger and thicker materials while offering the same advantages regarding low noise and dust as the smaller GSL machines. All GSL models can be equipped with a built in blower system in case a vacuum loading system is not available, or to transport the ground material to bags for storage.

Year of construction: 2024, condition: new, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces The best features of the proven GST and GSC series have been integrated into a compact redesign, with particular emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths of 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material feed and prevents material jams. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine to reduce maintenance downtime. The highly tangential, curved rear wall of the cutting chamber combined with the aggressive open rotor design ensures reliable material intake and minimizes the risk of blockages. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling voluminous parts such as bottles, canisters and crates. Due to the low feed height, the machines can be easily fed with material by hand or a small conveyor belt. The low noise emission and small footprint make the granulator the perfect solution for inline shredding Optional rear wall with higher stator knife M version: The feed method with a higher stator blade is better suited for thicker-walled and more compact parts, such as injection molded parts, profiles, sheets, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high-quality regrind is achieved regardless of the material type or shape, e.g. injection molded parts, profiles, plates, etc. Control system and control cabinet: The integrated control and control panel not only complies with all applicable safety regulations, but can also be adapted to specific requirements. In addition, peripheral equipment such as feed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available, which reduces power consumption during idle times and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 cyclone Rotor diameter (mm) 250 Rotor width (mm) 450 Drive (kW) 7.5 Number of rotor blades 3 x 2 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 700 Feed opening (mm) 380 x 450 Codpep Sr H Dofx Ahueri Opening feed option of the M version (mm) 295 x 450

Year of construction: 2024, condition: new, Beside the press granulator Rotor diameter (mm) 180 Rotor width (mm) 180 Rotor speed (rpm) 150 Drive capacity (kW) 3 Rotor knives (pcs) 18 Stator blades (rows) 2 Screen size (mm) >5 Weight approx. (kg) 140 The slow speed granulators in the GSL range are mainly used in injection and blow molding processes as beside the press machines to grind runners and sprues. The machines can be used for rejected products in the inline recycling process as well. Different hopper and base frame designs make it possible to integrate the machine with most types of injection molding machines and robots. Driven by gear motor or V-belt Unique knife design eliminates adjustment after resharpening. Simple tool less access for maintenance and cleaning Crsdpfx Ajiy D Szjhusi Customizable hopper and base frame

Year of construction: 2024, condition: new, Direct driven staggered rotor Special knife design makes adjustment unnecessary Easy access for maintenance and cleaning Gegqxgljx Cjdpfxon Hqxfs Ahueri Slow rotor speed creates less noise and dust Easily customizable to suit different applications Rotor diameter (mm) 300 Rotor width (mm) 400 Rotor speed (rpm) 150 Drive capacity (kW) 7.5 Rotor knives (pcs) 33 Stator blades (rows) 2 Screen size (mm) > 6 Weight approx. (kg) 550

Year of construction: 2025, condition: new, Beside the press granulator Rotor diameter (mm) 180 Rotor width (mm) 430 Rotor speed (rpm) 150 Drive capacity (kW) 4 Rotor knives (pcs) 45 Stator blades (rows) 2 Screen size (mm) >5 Weight approx. (kg) 250 The slow speed granulators in the GSL range are mainly used in injection and blow molding processes as beside the press machines to grind runners and sprues. The machines can be used for rejected products in the inline recycling process as well. Different hopper and base frame designs make it possible to integrate the machine with most types of injection molding machines and robots. Driven by gear motor Unique knife design eliminates adjustment after resharpening. Simple tool less access for maintenance and cleaning Codpfx Aoi Hpfdjhusri Customizable hopper and base frame

Condition: used, machine/vehicle number: 13047, Rotor diameter: 500 mm Crsdowbwtdopfx Ahuoi Rotor width: 600 mm Rotor blades: 5 Stator knife: 2 Inlet cross-section approx. 500 x 600 mm Drive motor: 55 kW

Condition: excellent (used), Year of construction: 2025, operating hours: 50,000 h, functionality: fully functional, overall weight: 17,000 kg, rotor diameter: 640 mm, rotor length: 2,500 mm, power: 247 kW (335.83 HP), rotational speed (max.): 400 rpm, Shred & Granulation Line - Approximate Operating hours 50,000 hours per machine. Very good condition. - Average output is 3.5 tonnes per hour Crjdpfx Aexg Thlohusi - Used exclusively for clean plastics such as PP and HDPE - Includes zig zags, double bagging station - Includes chiller, control panel, and 2x units of Eriez metal removal system at bagging stations - Immaculately maintained and regularly serviced Zerma Granulator (2018) - 1600-800-3 ×7 model. 185KW. With double bagging station, zig zag and conveyor with built-in metal detection (Model K1058). Vecoplan Shredder (2009) - AZ 2500 ECO Drive. 247KW - Shredder with pre-feed conveyor and adjoining conveyor with overband ferrous removal system. Includes spare cutters and counter knife

Condition: new, Year of construction: 2021, operating hours: 4 h, functionality: fully functional, machine/vehicle number: ZSS8501604002, overall weight: 4,290 kg, rotor diameter: 387 mm, number of blades: 40, rotor length: 850 mm, rotor width: 457 mm, power: 40.75 kW (55.40 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, rotational speed (min.): 74 rpm, year of last overhaul: 2025, sieve perforation: 60 mm, warranty duration: 6 months, input voltage: 400 V, Single-rotor shredder ZERMA ZSS 850-E 37 kW Hopper opening (mm): 1340 x 840 mm Usable cutting chamber: 690 x 730 mm Rotor diameter x width (mm): Ø 387 x 850 mm Rotor speed: 80 rpm Rotor model: E SEW oil-bath gearbox: Included Number and size of knives: 40 / 34x34x22 mm Cjdpfxsxtp Dij Ahuori Knife holders with bolts: Included Number of counter-knives: 1 row of 3 IE3 motor power: 37 kW Screen perforations: > 40mm (to be specified) Hydraulic screen opening: Included Discharge height: 560 mm Connected electrical power: 400 V +/- 5% / 50 Hz Hydraulic pusher power: 3.6 kW Hydraulic pusher with 2 speeds: Included Adherent front plate (ram): Included Air/Oil heat exchanger mounted on hydraulic tank Overall length: 2085 mm - Overall width: 1940 mm - Height: 2435 mm Approximate weight (kg): 4400 kg Control cabinet with SIEMENS PLC and settings menus such as: Recipes, Maintenance, Alarms, etc. Cable length to control cabinet: 5 meters See technical datasheet and/or attached diagram for more details.

Condition: used, machine/vehicle number: 13253, Rotor diameter: 800 mm Rotor width: 1200 mm Rotor knives: 7 rows Stator knives: 3 rows Codexqr T Ijpfx Ahusri Inlet cross-section approx. 1200 x 800 mm Drive motor: as per customer request

Condition: used, machine/vehicle number: 13386, Rotor diameter: 800 mm Rotor width: 1200 mm Crsdpfx Ahoxgi Syeuoi Rotor knives: 7 Stator knives: 3 rows Infeed cross-section approx. 1200 x 800 mm Drive motor: 132 kW

Condition: used, machine/vehicle number: 12979, Rotor diameter: 300 mm Rotor width: 200 mm Credpfx Ajxgi Sashuei Rotor knives: 3 Stator knives: 3 Infeed opening approx. 220x320 mm Drive motor: 5.5 kW

Condition: used, machine/vehicle number: 13298, Rotor diameter: 750 mm Rotor width: 1500 mm Rotor blades: 76 Crjdpfxswqyh As Ahusi Stator blades: 1 row Inlet cross-section approx. 1500 x 1500 mm Drive motor: 2 x 45 kW

Condition: used, machine/vehicle number: 13299, Rotor diameter: 750 mm Cjdpfxjwqyh No Ahujri Rotor width: 1500 mm Rotor blades: 76 Stator blades: 1 row Inlet cross-section approx. 1500 x 1500 mm Drive motor: 2 x 45 kW

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor 2 rows stator knives Inlet cross section approx. 600 x 660 mm Credpfx Aok Tuxdohusi Drive motor: 30 kW

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. Crjdpfsghgbhsx Ahusi In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case.

Condition: new, machine/vehicle number: Baureihe PM / Neumaschine, The impact disc mills (fine mills) of the PM series are high-speed centrifugal mills for fine grinding of almost all thermoplastics. Typical tasks are the fine grinding of regrind or primary material from profile, pipe or sheet extrusion. In addition, these mills can be used in the food, chemical and pharmaceutical industries. The material is centrally fed by the stationary grinding disc with dosing element. Fine grinding takes place between the rotating and stationary grinding discs. The material is discharged by means of pneumatic suction. Crjdpfxeghgb Ns Ahuji

Condition: new, ZERMA single shaft shredders of the ZPS series have universal application possibilities. Crsdpfx Ajghgdnjhuei They are suitable for shredding heavy and massive parts that cannot be directly shredded on a granulator. The large and heavy rotor of the shredder series ZPS , the low rotor speed as well as the high torque ensure low current peaks and thus avoid high energy costs. Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the task, the shredded material can be used directly in the manufacturing process, or it can be subsequently ground in a granulator. The shredders from the ZPS series are equipped with a 2-step hydraulic system that prevents the rotor from blocking. Knives and knife holders are completely screwed into the rotor. Generously dimensioned, externally located rotor bearings and a hydraulically swivelling screen basket are part of the standard equipment of every shredder. The machines can be extended or upgraded with numerous options, such as rotor cooling or Hardox wear armouring. Compared to the ZSS shredders, the machines of the ZPS series have a higher contact pressure device, which optimises the acceptance behaviour between the pusher and the rotor, especially with large-volume parts or pipes.

Condition: new, ZXS 1500 – 2x75kW – Working cross-section: 1500 x 1490mm ZXS 2000 – 2x90kW – Working cross-section: 1500 x 1900mm ZXS 3000 – 2x110kW – Working cross-section: 1500 x 2700mm ZXS series: The single-shaft shredder for demanding shredding tasks. The machines are extremely robust and achieve high throughput rates. Working widths from 1500 to 3000 mm and rotor diameters of 750 mm are available as standard. Credpfeghgdyex Ahusi Wide range of applications for the ZXS series: Many other materials can be shredded with the ZXS series and prepared for recycling, such as: B. Old cables, PET bottles, paper and cardboard, etc. Get advice on how your material can be shredded and recycled.

Condition: new, General: The single shaft shredders of the ZTS-/ZTTS-series have been specially developed for the shredding of whole or pre-shredded tyres. Both the ZTS and ZTTS shredders have a large rotor diameter of 760 mm and working widths of 1500 to 3000 mm. Both types are equipped with oversized external bearings and double drives. The tangential infeed ensures optimum feeding of the input material without the need for an additional hydraulic pusher. All tyre shredders have special wear protection in all relevant machine areas. ZTS and ZTTS differ in the number of rows of stator knives and in the screen perforation installed. Crsdeghgd Djpfx Ahusi Applications: Machines of the ZTS series have one stator knife row and are therefore used for the first stage in the pre-shredding of car tyres or other large, solid parts to a final fineness of approx. 150 mm. For the second stage a ZTTS shredder is used, which grinds the material to approx. 20 mm. The well thought-out machine design together with the adjustable blade gap allow an optimal separation of rubber and steel fractions. In a further stage, the steel fractions can be separated via a strong magnetic separator.