Condition: like new (used), functionality: fully functional, spindle diameter 35mm 5 speeds from 3000 to 10,000 rpm motor power 5.5 kW Maggi feed system with 4 rollers and adjustable speed indexing carriage with a graduated scale for angle adjustment table 120x730 cm 760 kg year of manufacture: 2001 DTR manual – YES Dkjdpfxezx U Nus Ab Asw CE marking – YES guard for mortising AIGNER table tops 4 feed speeds turret for adjusting milling depth option to purchase without the feed system external dimensions: 2550x1700x1660

Condition: excellent (used), functionality: fully functional, 4 speeds, ranging from 3000 to 10,000 rpm. Engine power: 4 kW. Table dimensions: 950 x 370 cm. Tilting spindle. CE marking. Year of manufacture: 2015. Mobile trolley integrated into the table. Rotation: right/left. Adjustable angle fence. Trolley lock. Djdozzpchepfx Ab Aokw Manual adjustment of spindle angle and height. Cast iron table. External dimensions: 960 x 850 x 1280.

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, We are selling a plate gripper that we only used once, but it did not meet our requirements. Dods Agu Swspfx Ab Askw The device is in new condition.

Condition: good (used), Year of construction: 1990, functionality: fully functional, Table spindle moulder TS110 Dkjdjv Im Swspfx Ab Aow Year of manufacture: 1990 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000 and 10,000 rpm Reversible left/right rotation, brake Haffner 3-roller power feed, 4 feed speeds, Feed rollers new, Good condition – machine has been inspected Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: AB00022616, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 901 kg, SCM Class TI 145ep shaper in CE version, manufactured in 2022. Equipped with the READY 3 UP system, featuring a shaper fence with mechanical programming, a FAST sectional table with manual adjustment, and a support for the feeder with manual vertical and horizontal movements. Interchangeable shaper arbor with MK 5 coupling, tool holder cone MK 5 with adapter and clamp (right), and a T-SET rapid tool clamping system. LL version with 2 cast iron table extensions for profiling. Dkjdpfjz Nggrex Ab Aow

Condition: excellent (used), Year of construction: 2019, Table milling machine HOFMANN TFS 107, manufactured in 2019. Table milling machine with a milling fence and safety guard. Collection possible from December 15th. Earlier collection is only possible by prior arrangement. Inspection by appointment only. Dismantling, loading, and transport will be arranged. Price on request. Contact: DS-Maschinen – Owner David Schulz. Dkedpfxo Adubxe Ab Aew

Condition: ready for operation (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SA106560, overall weight: 7,500 kg, total width: 2,970 mm, total length: 3,460 mm, total height: 2,200 mm, spindle diameter: 350 mm, type of input current: three-phase, space requirement length: 7,000 mm, space requirement width: 5,000 mm, milling spindle length: 600 mm, space requirement height: 2,600 mm, length stop: 3,400 mm, input voltage: 380 V, There are two separate machines that can operate independently from each other but also work together. We only produce windows on the SAC F30; for doors, we use the FS.05 and the F30 together. We also have a tooling set that can produce window profiles in four thicknesses: 58/68/78/88 mm and, optionally, 108 mm, from the Italian manufacturer Fantacci. It comes with a large number of spare cutting plates. All digital and paper drawings are available with order numbers for the spare cutting plates, etc. New blades can be easily ordered from Fantacci in Italy. Dust extraction pipes are included, along with pneumatic valves and automatic control. Dkodpfezq Sr Rex Ab Aew Additional software with unlimited time access allows you to design a window, door, or sliding door and send the production file directly to the machine. All information about the machine, including electrical/pneumatic layout drawings, a spare parts catalog, etc., is available. The machine will be available from 08/2026. You can see the machine in operation at our facility until 20.08.2026. If you are interested, we will provide additional information on how the machine works (1-2 days of training). You will need to arrange the transport yourself, but we will load the machine onto the truck. Prices are exclusive of VAT. SAC F30 2-4 angle machine = €40,000.00 SAC FS.05 drilling machine = €14,000.00 (If both machines are purchased together, the combined price is €50,000.00) Cutting tool set, including spare cutting plates = €8,500.00 Dust extraction with automated pneumatic valves is included free of charge, as is the Ramasoft software license.

Condition: repair required (used), Year of construction: 2000, functionality: not functional, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, overall weight: 1,100 kg, Equipment: documentation/manual, HOFMANN table milling machine, type TF1200, with a sliding carriage on the side and an extendable table support, with electric height adjustment. Unfortunately, the programs on the control unit cannot be saved. Otherwise, the machine is in very good condition. Djdpfx Aez Eztkjb Aokw

Condition: used, Year of construction: 1968, Unit can be swiveled. Unit can be moved left and right via handwheel. Maximum milling depth: 150 mm - 180 mm. Slot length: approx. 250 mm. Weight: approx. 320 kg. Dkjdpjzkl T Uofx Ab Aew Storage location: Nattheim.

Condition: used, Zimmermann Wall-Mounted Milling Machine with Work Table and Tooling Wall-mounted cantilever milling machine for model and template making, woodworking, and machining model-making plastics. Suitable for pattern-making workshops and individual milling tasks. The milling head is positioned above the work table and adjusted manually. Material suitability depends on the cutting tool installed. Included: – Milling head with electric motor and control buttons – Adjustable cantilever arm with wall mounting Dodpfj Ah Ihpjx Ab Aekw – Work table with drawers – Milling cutters, collet chucks, spanners, and accessories shown in the photographs Manufacturer: Zimmermann Condition: used, dismantled Quantity: 1 complete set Stock reference: Y211 The machine is sold dismantled. The first photograph shows the original installation before dismantling; the remaining photographs show the current components and tooling supplied. Installation and electrical connection are the buyer’s responsibility. Price for the complete set: EUR 590 net, excluding VAT. Reasonable offers will be considered. Available from stock in Latvia. Inspection and collection are possible on weekdays from 07:00 to 16:00 at: “Salas mala”, Gātciems, Salas parish, Mārupes municipality, LV-2105, Latvia. Loading assistance is available.

Condition: used, Year of construction: 2011, Spindle swiveling: Yes, -45 to +45° Height adjustment: Handwheel Dkjdpszdzbuefx Ab Ajw Swivel adjustment: Handwheel Milling vice adjustment: Manual Height indicator: Mechanical counter Swivel angle indicator: Mechanical counter Milling stop indicator: Mechanical counter Milling spindle diameter: 30mm / new milling spindle Spindle speeds: 1500, 3000, 4500, 6000, 9000 Motor power: 4 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1000mm Machine depth: 1200mm Weight: 580kg

Condition: excellent (used), Year of construction: 2020, Equipment: Manual adjustment of the milling spindle with digital display Milling fence with crank adjustment of the fence jaws and digital display Electrical preparation for feed mechanism Speed indicator Right/left rotation of the milling spindle with electrical locking during switching Automatic motor brake CE conformity declaration Technical data: Spindle extension length 140 mm Milling spindle diameter 30 mm Spindle speeds 3000/4500/6000/7000/10000 rpm Dkjdpfs Aayg Eox Ab Ajw Overhang of the spindle base from the table 5 mm Dust extraction port diameter 2 x 120 mm INCLUDED OPTIONS: - Milling fence with crank adjustment - Aluminum fence jaws instead of the wooden fence jaws on the milling fence - LL version with 2 cast iron table extensions, length 2500 mm - Motor power: 7.0 kW, 400 V, 50 Hz Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex works, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claim. The buyer is free to inspect the machines at the location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), The main motor 37 kW, and the roller drive motor 4 kW. Dkjdpfx Abjzxc Aij Aow

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. - Dovetail and slot table - Aigner integral fence - Elu feed system Dedeztwr Iopfx Ab Ajkw - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Net price

Condition: good (used), Year of construction: 1985, functionality: fully functional, Spindle milling machine with a comprehensive set of tools included free of charge. Dkodpoy Suhtefx Ab Asw

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale is a used SAMCO T 40 I table milling machine / swivel spindle milling machine, manufactured in 1996. This compact and robust milling machine features a spindle that can be swiveled up to 45°, multiple speed settings, and clockwise/counter-clockwise rotation. The spindle adjustment is conveniently done using the side handwheel. Technical specifications: Manufacturer: SAMCO / SCM Type: T 40 I Year of manufacture: 1996 Machine number: KK/032907 Voltage: 380 V / 50 Hz Motor power: 3 kW / 4 HP Speeds: 3,500 / 6,000 / 8,000 rpm Spindle length: approx. 125 mm Max. tool diameter: approx. 180 mm Swiveling milling spindle: up to 45° Dodpfx Ajzxx Egsb Aekw Clockwise/counter-clockwise rotation Motor brake Manual spindle height adjustment Milling fence with dust extraction option Weight: approx. 175 kg Used, well-maintained condition considering its age. The machine is compactly built and is well-suited for carpentry shops, joineries, and smaller woodworking businesses. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be immediately available! The machine will be inspected before sale. In the case of a sale to commercial customers, the warranty will be excluded due to the year of manufacture. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: good (used), PANHANS machine, year of manufacture 1983 – Type 259-4 Technical specifications: * Manufacturer: PANHANS * Machine type: 259-4 * Machine number: 2137 * Year of manufacture: 1983 * Rated voltage: 380 V Dkjdpfsz S Nxpsx Ab Aow * Frequency: 50 Hz * Operating current: approx. 11.5 A (according to the nameplate, value not conclusively verified)

Condition: used, total length: 1,700 mm, total width: 1,000 mm, total height: 2,100 mm, Year of manufacture: 2001 Colour: Grey Djdpfxoymlaho Ab Aekw - Details: - └ Description: Readout positioning does not work properly. Price AS-IS - Year: 2001 - CE marking present: Yes - Serial number: AB/143039 - Spindle diameter [mm]: 40 - Table length [mm]: 1195 - Table width [mm]: 350 - Feeding device present: Yes - Guide present: Yes - Tool key included: Yes - Spindle speed: Manual - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 20 - Transport dimensions: 1700mm x 1000mm x 2100mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1973, Used Machine Year of Manufacture: 1973 Features and Technical Specifications - Table milling machine for profiling, grooving, and rebating with appropriate milling tools - Three speed settings to accommodate different tools and machining operations - Spindle speeds: approx. 2,500 / 4,500 / 6,000 rpm - Milling arbor diameter: 30 mm - Height adjustment of the milling spindle: approx. 70 mm - Milling stop ruler with fine adjustment for tool diameters up to 250 mm Dodpfx Ajzy Dzveb Aokw - Weight: approx. 385 kg - Caution: The machine does not have a motor brake! - Availability: available shortly

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, worktable: 870 mm x 560 mm spindle diameter: 35 mm maximum tool diameter: 180 mm Djdpjznllrefx Ab Ajkw spindle overhang from the worktable: 155 mm 3-roller feed mechanism three-phase

Condition: good (used), total length: 2,500 mm, stable, well-functioning machine with a drive unit. axle: 50 mm. Dkodpoz Dfy Sofx Ab Asw

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. allowance for machining per side: 30mm Dedpfo Af Uvnex Ab Aekw - Fitted sleeve with a diameter of 90mm - Cutting head drive motor: 22kW - Smooth feed speed adjustment + forward/reverse via frequency inverter - Feed motor: 1.5kW In sequence: - Infeed trough - Toothed pull rollers: 6 pcs - 4-knife cutting head - Smooth pull rollers: 6 pcs - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES – Manufactured by the Polish brand SAFO – DTR+CE documentation included – Includes sleeves – Used turning machine, very good condition Net price: 98,900 PLN Net price: 23,000 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6857 TECHNICAL DATA - Spindle diameter: 30mm - Spindle height: 140mm - Interchangeable spindle - Adjustable up/down - Guide Dkjdpj Aggd Nofx Ab Aew - 4 speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions with extension: 1970x990mm - Motor: 5.2kW - Dust extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm - Weight: 550kg ADVANTAGES - German made - Used milling machine - Very good condition Net price: 11900 PLN Net price: 2767 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: good (used), Year of manufacture: 1998 ZA 66 /95 With laser cutting indicator Dodpfsy Am Eljx Ab Ajkw Dimensions: 5700 x 1500 x 1900 mm Parallelogram table, tiltable up to 60 degrees 4 motors Cross-cut unit Cutting height: 290 mm Saw blade diameter: 750 mm 5.5 kW motor Primary saw Cutting depth: 175 mm (blade 450 mm) Cutting depth: 225 mm (blade 550 mm) 10 kW motor Trimming saws, each 2.2 kW Cutting depth: 125 mm Saw blade diameter: 350 mm Tiltable up to 45 degrees

Condition: excellent (used), Catalog number 7248 TECHNICAL DATA - max. workpiece height 160mm - spindle working length 250mm - spindle diameter 40mm - max. tool diameter 220mm - worktable dimensions (length/width) 420x1010mm - motor 11kW - 2 pneumatic workpiece clamps - dust extraction port diameter 180mm - dimensions (length/width/height) 1500x1010x1560mm - weight 689kg ADVANTAGES – Made in Germany – Used milling machine, very good condition Dkjdpe Af Iz Iofx Ab Aow Net price: 31900 PLN Net price: 7419 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)