Condition: used, Year of construction: 1992, used, excellent condition, top-of-the-line equipment with plunge spindle With this milling machine, both plunge and lift-out milling operations can be performed. This means the milling spindle can be controlled to plunge in and lift out via adjustable limit switches, operated by a pneumatically powered, movable table. Manufacturer: Hofmann Model: TFS 1200 Year of construction: 1992 Machine no.: P127-92-222-723 Motor: 5.0 / 6.2 kW, reinforced Tiltable from -5° to +45° Motor brake Motor with 2 speeds / pole-changeable 6 speed stages: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Forward and reverse operation Table size: 2000 x 830 mm Milling spindle diameter: 30 mm Milling fence with fine adjustment Digital displays for fence position, diameter, and cutting depth Electric height adjustment Electric tilt adjustment Hjdpfoy Ay Dzox Ampsl Digital displays for tilt angle and spindle height Extraction connection: Ø 2x 120 mm Space required: approx. 2000 x 1600 x 1400 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Sold as seen, in as-inspected condition, function tested without overhaul, without warranty or guarantee

Condition: used, Year of construction: 1996, Used, excellent condition Partially overhauled, new switches Spindle run-out 0.03 mm Motor newly mounted and rewound Make: Lazzari Model: Base 45 Year of manufacture: 1996 Machine-No.: 9601076 CE type-tested Motor power: 4.0 kW Tiltable 45° Automatic brake 5 speed settings: 3 / 4.5 / 6 / 8 / 10,000 rpm Forward/reverse operation Table size: 1100 x 700 mm Spindle shaft diameter: 30 mm Control panel on top Hedpfx Amoy Ay Dnepol Extraction port: diameter 120 / 120 mm Space requirement: approx. 1100 x 1200 x 1400 mm Weight: approx. 490 kg Total connected load: 4 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current as-inspected condition, without warranty or guarantee.

Condition: used, used Cleaned, function tested, trial run, partially overhauled Brand: Bäuerle Model: SFM Motor 4, 5.5 HP Hodpfx Amjy Ay Awepsl Motor with 2 speeds/pole-changing 6 speed levels: 2800 / 4500 / 6000 / 5600 / 9000 / 12000 Foot brake Right-left rotation Spindle diameter: 30 + 40 mm Table size: 1100 x 900 mm Wooden fence jaws new Belt new Milling fence with fine adjustment Space requirement approx. 1000 x 900 x 1000 mm Weight approx. 600 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is as inspected, without guarantee or warranty.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, spindle diameter: 30 mm, pivoting range: 45 °, rip fence adjustment: manual, actuation type: manual, rotational speed (max.): 7,800 rpm, rotational speed (min.): 3,700 rpm, Felder spindle moulder F-38, year 1994, with Felder power feeder F38, year 2020 3 kW motor Height adjustment via handwheel Tilt adjustment via handwheel Maximum tool diameter 220 mm Left/right rotation 3 speeds 37 Sliding table with table extension and cross fence Additional moulder hood for tools up to 300 mm diameter Speed adjustment by shifting the flat belt with quick-release fastener Hsdjy Hmbnopfx Ampjl Inspection and test run possible and encouraged at any time Also available on Sundays or in the evenings Loading by forklift

Condition: excellent (used), Number of knives 24 z= width 15/20 mm circle diameter 240 mm material Stahl HM Bore diameter 30 mm Hsdpeywzwxofx Ampsl

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 4,250 mm, travel distance Y-axis: 2,280 mm, travel distance Z-axis: 150 mm, overall weight: 6,300 kg, spindle motor power: 18,000 W, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis SCM Accord 20 CNC router was manufactured in 2010. It features a working area with dimensions of 4250 mm in the X-axis and 2280 mm in the Y-axis, making it suitable for nesting production and wood processing. The machine includes a powerful electrospindle with a speed range of 600 to 24,000 rpm and a side tool magazine with 10 positions. If you are looking to get high-quality milling capabilities, consider the SCM Accord 20 CNC router we have for sale. Contact us for further details. Hodpfeyu Rbmjx Ampjl • Typical applications: nesting production; windows and doors manufacturing; stair components production • Table size (L x W): 4200 x 2300 mm • Controlled axes: 3 (X, Y, Z) • Axis drives: Brushless motors • Rapid traverse: X 75 m/min; Y 75 m/min; Z 15 m/min • Lubrication: Automatic central lubrication system • Work table: Nesting table; large-format multifunctional aluminum matrix; pressed aluminum construction mounted directly to the base; designed for vacuum clamping of large panels • Main spindle: 1 electrospindle, HSK F63 tool holder; 600–24,000 rpm; 11 kW inverter; up to approx. 18 kW in working range (12,000–18,000 rpm); CW/CCW rotation; air cooling with fan; pneumatic tool clamping • Tool changer: Side tool magazine TR-10; 10 positions; 130 mm spacing; max 8 kg per position; automatic tool change • Workpiece clamping: Vacuum (nesting table); 2 vacuum pumps, 250 m³/h each • CNC control: SCM PC control • Software: Xilog Maestro; Xilog Plus; graphic programming editor; DXF import; subprogram and macro management • Electrical: 400 V; 50/60 Hz • Construction: Heavy welded gantry; high-rigidity industrial frame; aluminum matrix table mounted directly to the base • Safety: Fixed safety fencing on two sides; CE marking • History/condition: One owner since new; used continuously in one company; regularly serviced; technical condition very good Additional equipment • Automatic dust extraction hood

Condition: used, functionality: fully functional, Gomad FD-2 Spindle Moulder Spindle diameter: 25 mm Spindle length: 140 mm Main motor, 2-speed, output 5.9/4.4 kW Interchangeable spindle Hsdpfx Ajy E Nk Aompsl Speed change via belt: 3000/4500/6000/9000 rpm

Condition: excellent (used), Sibo Taus 2 1/2 Stylus Profiling Machine Working diameter 18-63mm Main engine with 5.5kw power Minimum length of the processed element 470mm Feed speed regulated by means of a variator Hodpfx Amjv Tv Urspjl Possibility of producing elements such as: billiard cues, broom handles, shovels, rakes or chair legs

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, milling length: 750 mm, milling spindle length: 750 mm, spindle stroke: 150 mm, Equipment: documentation/manual, Wigo 1016 Cross Milling Machine Working length: 750 mm Maximum milling height: 150 mm Spindle diameter: 50 mm Spindle motor power: 15 kW Hydraulic pump motor: 3 kW Pneumatic material clamping Foot pedal control Machine dimensions: 1450 x 1600 x 1800h mm Hodpfx Ajxzimtempjl

Condition: good (used), Year of manufacture: 1998 ZA 66 /95 With laser cutting indicator Hodpfxsy Am Elo Ampsl Dimensions: 5700 x 1500 x 1900 mm Parallelogram table, tiltable up to 60 degrees 4 motors Cross-cut unit Cutting height: 290 mm Saw blade diameter: 750 mm 5.5 kW motor Primary saw Cutting depth: 175 mm (blade 450 mm) Cutting depth: 225 mm (blade 550 mm) 10 kW motor Trimming saws, each 2.2 kW Cutting depth: 125 mm Saw blade diameter: 350 mm Tiltable up to 45 degrees

Condition: ready for operation (used), SCM T 120 C with power feed Hedpfx Aoyw Sydjmpsl

Condition: new, Year of construction: 2026, ROBLAND T 120 TP voltage 3 x 230V / 3 x 400V weight 1070 kg motor power 7 kW (optional 9.2 kW) table dimensions 1200 x 705 mm table height 930 mm interchangeable spindle diameters 30 / 32 / 40 / 50 mm 1" 1/4 spindle length 180 mm height adjustment 205 mm number of revolutions per minute 3000 / 4500 / 6000 / 7000 / 10000 max diameter and height of the table 320 x 95 mm dimensions of the movable table 760 x 500 mm table height adjustment 1050 mm diameter of the extraction spigot 120 mm Hjdpfjllup Rjx Ampol

Condition: excellent (used), functionality: fully functional, Balestrini Mini-C 2500mm Linear Copy Milling Machine Model MINI-C Working table length: 2500 mm Two milling units, one per side Milling motor: 2 x 5.5 kW Maximum tool height: 120 mm Heads included Hodpjy Ew Ehefx Ampol Hydraulic table feed, steplessly adjustable Pneumatic clamps for units and material Number of material clamps: 5 pcs.

Condition: new, Year of construction: 2025, functionality: fully functional, TECHNICAL DATA Table size 1100 x 760 mm table height 870 mm milling spindle not interchangeable 30 mm Hjdpfegz Sifjx Ampel clamping height 140 mm height adjustment 140 mm suction socket 2 x ø 120 mm speed 3000 / 4500 / 6000 / 9000 rpm Colour RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Solid German machine construction Table milling machine with double-sided swivelling fixed milling spindle for swivelling range from -5° to +45.5 Operation via handwheel at the bottom of the machine stand Height and swivel adjustment via handwheels Analogue dial gauges for height and swivel adjustment 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick tensioning device Electronic speed display Push button for spindle start and stop Left and right rotation Cutter quick clamping device Finely planed cast iron table Operation easily visible and accessible at the bottom of the machine body Milling stop 215 total adjustment via handwheel incl. multiplex stop plates Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa CE tested GS tested

Condition: good (used), Year of construction: 1968, Fully functional milling machine with integrated sliding carriage for tenoning. Description: - Sturdy cast machine body for low-vibration operation - Sliding carriage for cross feed - Height adjustment via handwheel - Fixed milling spindle - Connection option for extraction - Milling spindle tool holder / diameter 30 mm - Milling spindle tool holder / diameter 40 mm Hedpoy Dctnsfx Ampsl - The fence can be flexibly adjusted/rotated without changing the measurement. - Spindle speeds: 3000 and 6000; 4500 and 9000 rpm - Motor bearings replaced around 2003. Additionally: ELU feed unit type MVA 2+ with 2 speeds, forward and reverse. Transport dimensions approx. 1100 x 1100 x 1800 mm Technical data on request All information without guarantee!

Condition: used, tool adaptor . weight ca. 500 kg Spindle headsDrill rod extensionsMounts with drills Trolley 830 high x 750 wide x 600 deep Hodpfx Aoyyczqompol technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team

Condition: like new (used), For sale is a used Felder spindle moulder F-900 Z with mortising and slotting table length of 1300 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 5 spindle speeds - Spindle tiltable 90° - 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Mortising and slotting table 1300 mm - Electrically height-adjustable and tiltable with "PowerDrive" Hedpfx Asw Hfd Iempol - Motor power 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299. Related terms: spindle moulder, milling machine, moulding Reference: R-A0117

Condition: used, Year of construction: 1994, 1994 Bacci FCH8 dual-spindle milling machine with 4 heads per side (3 to mill and 1 for polishing) Overall dimensions: mt. 7,20 x 2,40 h. 1,90 Approximate weight: Ton. 5 Hodpfx Amsx Hwmbepjl

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 5 h, power: 5 kW (6.80 HP), input voltage: 400 V, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table width: 530 mm, table length: 1,200 mm, overall weight: 510 kg, tool diameter: 240 mm, Equipment: CE marking, Professional woodworking machine with tilting milling spindle and cantilever arm. Exhibition machine like new - used only for demonstration purposes Milling unit made from cast iron, tiltable up to -45° backwards Four milling speeds from 3500 to 10000 rpm Forward and reverse rotation Height and tilt display accurate to 0.1 mm Quick speed change via eccentric clamping Powerful 5.0 kW industrial motor Curved milling hood included Made in Italy Milling spindle tilt 0 – -45° Hjdpjyn Ny Ujfx Ampol Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Speed indication via LED display on the front panel Spindle shaft diameter 30 mm Max. tool diameter 240 mm Max. retractable tool diameter 230 mm Max. tenoning tool diameter 320 mm Accessories included: Mitre fence with two flip stops Eccentric clamp Curved milling safety guard Additionally, adjustable system fence jaws The machine can be inspected and tested at any time at the Chemnitz location.

Condition: used, second hand Make Comag Spindle diameter 30 mm Table size 900 mm x 900 mm Extraction connection D 120 mm Hsdpfjyz Dd Nsx Ampol Space requirement approx. 900 mm x 1100 mm x 1000 mm Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without guarantee and warranty

Condition: used, Year of construction: 2006, Working width ca. 1.000 mm feed: pneumatisch Spindle diameter 40 mm Hedpfjx Ivk Uox Ampel

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 660x460x1200 mm Weight 49 kg Total power requirement 0,85 kw Hedpfx Aovz Hgujmpjl

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm Hodpfxou T Hhke Ampsl - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Maximum milling tool diameter: 390 mm Maximum tool clamping height: 225 mm Hedpfx Ajyync Tempsl Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Max. saw blade diameter: 350 mm Cross-cut saw motor: 0.75 kW Saw blade arbor: 30 mm Sliding table travel: 1270 mm Length stop range: 1750 mm Weight approx.: 740 kg

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, spindle diameter: 30 mm, Equipment: CE marking, Spindle moulder with extended tables "SCM" model T130 LL Code: TOU-056 USED, IN EXCELLENT CONDITION – V380/50 – “CE” Spindle diameter: 30 mm Extended tables – total length 2560 mm FAST table Expandable fence for wide workpieces Motorized spindle group height adjustment INVERTER for speed adjustment up to 10,000 rpm Spindle rotation reversal Motor power: 5.5 kW Hodpfey E I Dnox Ampsl