Tenoning machine

Krüsi ZA66 / 95

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg Kdedpfx Ajh Nvyzsldjt

Condition: excellent (used), mileage: 495,000 km, power: 537 kW (730.12 HP), fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: blue, driver cabin: sleeper cab, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2017, Equipment: AdBlue, air conditioning, cruise control, retarder, second fuel tank, spoiler, = Additional Options and Equipment = - Leaf suspension - Roof spoiler - Refrigerator - Air suspension - Radio/CD player - Sleeper cab - Sun visor - Power take-off (PTO) = Remarks = Colour: Blue Details Manufacturer: Scania Model: R 730 8x4 Chassis number: YS2R8X40005472379 Year: 2017 Mileage: approx. 495,000 km Engine: 730 HP / EURO 6 / 16 liters diesel / V8 Transmission: Scania Retarder R4100 First axle: 8,000 kg | 385/65 R 22.5 | leaf suspension Second axle: 8,400 kg | 385/65 R 22.5 | air suspension Rear axles: 13,000 kg | 315/80 R 22.5 | air suspension | hub reduction Gross vehicle weight (GVW): 26,000 kg Gross combination weight (GCW): 160,000 kg Equipment 500L + 500L fuel tanks AdBlue NATO / 24-volt electrical system Warning beacons on roof Alcoa rims Toolbox PTO with 170L tank JOST JSK38C 3.5" fifth wheel on sliding frame Webasto Cabin Multifunction steering wheel Cruise control Sun visor 2 x Bed Fridge Comfort seats Storage compartments Radio CD player / AUX / USB Tachograph Roof hatch = Further Information = General Information Year of manufacture: 2017 Technical Information Number of cylinders: 8 Engine displacement: 16,000 cc Payload: 160,000 kg Gross permissible weight: 42,000 kg Transmission Kdjdpfx Alouu Ha Dodjt Gearbox: Scania Retarder R4100 Axle Configuration Front axle: Tire size: 385/65 R 22.5; Aluminum rims; Max. axle load: 8,000 kg; Steered; Suspension: leaf suspension Mid axle: Tire size: 385/65 R 22.5; Aluminum rims; Lift axle; Max. axle load: 8,000 kg; Suspension: air suspension Rear axle 1: Tire size: 315/80 R 22.5; Twin tires; Aluminum rims; Max. axle load: 13,000 kg; Reduction: outboard planetary axles; Suspension: air suspension Rear axle 2: Tire size: 315/80 R 22.5; Twin tires; Aluminum rims; Max. axle load: 13,000 kg; Reduction: outboard planetary axles; Suspension: air suspension Functional Body brand: Scania Condition Technical condition: very good Visual condition: very good Damages: none Financial Information Price: On request

Condition: excellent (used), MAWEG Gluing Press Machine frame inclined at 10 degrees Single-sided loading Horizontal beam with manually adjustable height via hand crank (all clamping cylinders can be adjusted together) Hydraulic cylinders with quick clamping function, infinitely adjustable Manual hydraulic cylinder clamping Pressing force per hydraulic cylinder approx. 2000 kp Hydraulic cylinder stroke 100 mm Clamping depth 100 mm Maximum clamping length: 2800 mm Maximum clamping height: 1800 mm 4 vertical pressing cylinders 2 horizontal pressing cylinders 6 counter-stops Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are ex-location and are pick-up prices – loading included! • The machines have been cleaned and function tested. Kdsdpeyyn E Usfx Aldet • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure Kdjdpfx Alexz Hh Uodst 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: refurbished (used), 6-spindle moulder, with 22 cm workbench and grooved workbench for short pieces. Automatic left shaft: automatically adjusts according to the width of the wood being processed. Engine composition and power: Lower 5.5 kW Right 4 kw Automatic left 5.5 kw Right 5.5 kw Superior 5.5 kw Kedpfevhbf Sjx Aldsdt Less than 4 kW 4kW towing motor automatic left shaft hydraulic power unit 0.55 kw

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Kdedpfx Aloxqp Ngodst

Condition: excellent (used), mileage: 442,000 km, power: 412 kW (560.16 HP), fuel type: diesel, tire size: 385/65R 22.5, axle configuration: 8x4, fuel: diesel, brakes: intarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 16,000 kg, Year of construction: 2015, Equipment: AdBlue, = Additional Options and Accessories = - PTO = Notes = Color: Yellow Details Manufacturer: MAN Type: TGX 41.560 8x4/4 BBS Chassis number: WMA86XZZ6GL071758 Year: 2015 Mileage: approx. 442,000 km Engine: 560 hp / EURO 6 / Diesel Transmission: Automatic 6F Intarder by ZFWSK 400 First axle: 9,000 kg - 385/65R 22.5 - Leaf suspension Second axle: 8,000 kg - 385/65R 22.5 - Air suspension Rear axles: 16,000 kg - 315/80R 22.5 - Leaf suspension GVW: 41,000 kg GCW: 180,000 kg Equipment Jost JSK38 fifth wheel on sliding frame Toolboxes behind cabin Work lights Front push coupler - to be mounted Kdedpfx Alew Tcvaodet Rear Rockinger coupler - to be mounted Automatic gearbox Intarder PTO + hydraulic pump system Cabin Sleeper cabin Cruise control Air conditioning Comfortable seats Radio CD player/Navigation Sun visor = Further Information = General Information Year of construction: 2015 Intended use: Agriculture Technical Information Number of cylinders: 8 Payload: 180,000 kg GVW: 41,000 kg Transmission Transmission: ZFWSK 400, Automatic Axle Configuration Front axle: Tire size: 385/65R 22.5; Max. axle load: 9000 kg; Steered; Suspension: Leaf suspension Rear axle 1: Tire size: 385/65R 22.5; Max. axle load: 8000 kg; Steered; Suspension: Air suspension Rear axle 2: Tire size: 315/80R 22.5; Dual tires; Max. axle load: 16000 kg; Reduction: Outer planetary axles; Suspension: Air suspension Rear axle 3: Tire size: 315/80R 22.5; Dual tires; Max. axle load: 16000 kg; Reduction: Outer planetary axles; Suspension: Air suspension Functional Brand of body: ZF Condition Technical condition: very good Optical condition: very good Damage: none Financial Information Price: On request

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Maximum milling tool diameter: 390 mm Kdodoyync Tspfx Aldet Maximum tool clamping height: 225 mm Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Max. saw blade diameter: 350 mm Cross-cut saw motor: 0.75 kW Saw blade arbor: 30 mm Sliding table travel: 1270 mm Length stop range: 1750 mm Weight approx.: 740 kg

Condition: used, machine/vehicle number: 17314, Wood band saw, band saw machine, band saw, vertical band saw -Band saw: Vertical band saw -Drive: 5.5 kW -Cutting width: max.780 mm -Cutting height: max.300 mm -Saw band: length 5500 mm -Dimensions: 1800/875/H2440 mm -Weight: 870 kg Kedpfshx E Ucex Aldsdt

Year of construction: 1989, condition: used, functionality: fully functional, Lot of 13 used machine tools: Lathes, milling machines, radial drill, grinding machine, grinding wheel. TRANSPORT TO BE AGREED UPON DURING PURCHASE OR QUOTATION: - MT180 TRIFASE Lathe - INGERS 175 three-phase Lathe - LEGOR 300 three-phase - ANSELMI 180 three-phase Lathe - Idroming 600 (DRM) - Grinding machine - BERGONZI FS 870 Radial drill - FRESA Prvomajska 1 - FRESA Prvomajska 2 - SERRMAC RAG 25/L three-phase pillar drill Kodpfxszg E Hyj Aldjdt - ITALERI three-phase pillar drill - BIMARK MOD. 30 three-phase pillar drill - Fratelli Rosa Milano three-phase pillar drill - Salmoiraghi three-phase grinding wheel Technical details for each machine are shown in the photos. Transport costs to be determined during the quotation process. For any further information, please do not hesitate to contact us. Machines intended for countries outside the EU. ----- Price: 12,900 EUR, VAT excluded + TRANSPORT COSTS TO BE BORNE BY THE PURCHASER -----