Condition: reconditioned (used), Functionality: fully functional, travel distance X-axis: 1,320 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 1,800 rpm, controller model: Fagor 8055, TECHNICAL DETAILS Table size: 1,700 x 510 mm Max. table load: 3,000 kg Travel paths X-axis travel: 1,320 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Spindle Dkslq N Dxswfghrjrsl Spindle speed range: max. 1,800 rpm Tool holder: ISO-50 Control system CNC control: Fagor 8055 Electronic handwheel: Fagor MACHINE DETAILS Machine weight: 8,500 kg

Condition: reconditioned (used), Deckel FP5 NC Toolroom Milling Machine Model: FP5 NC Original Year of manufacture: 1986 Control: DECKEL DIALOG 4 Table Area: 1000 x 550mm 'X' axis Travel: 710mm 'Y' axis Travel: 600mm 'Z' axis Travel: 500mm Spindle Taper: SK 40 Spindle Speeds: 18 - 6300 RPM Spindle Power 7.5 kw 380V - 3 PHASE Machine Weight = Approx 3665 kg's Control cabinet = Approx 460 kg's Splash Cabinet = Approx 300Kg.s The machine is in very good working order. The splash cabinet is included and has been partially restored. New Linear bearings have been fitted for all the door rails & some of the internal panels have been Re-Powder coated. This machine has not had a lot of run hours for its years and still quite a very nice machine. Dkelq N Dxewhwhborol Note: Machine Is currently fitted with Vertical spindle Head. Machine has capability for use with Horizontal milling attachment, however the Horizontal Spindle support arm is not included. The Horizontal Spindle arbors and spacers are however included.

Condition: refurbished (used), Table Size: 1635mm x 460 mm X Long Axis: 1300 mm Y Cross Axis: 700 mm Z Vertical Axis: 500mm Spindle Taper: 40 ISO Spindle Speeds: 30-2066rpm Dkolewh N Uyeq N Dxrjl Feed Range: 1.6 to 820mm/min Rapid Feed Rates X/Y/Z: 2800mm/min Max. distance between milling head and table 649 mm Machine Weight 3200 kg Machine Dimensions L x 2361mm D x 2500mm H x 1648mm Main Motor 8.7 kW Machine Light Universal Head Coolant Condition: Fully Refurbished (reground, hand scraped and re-aligned) New Screws & Nuts on X, Y and Z

Condition: excellent (used), Year of construction: 2019, operating hours: 11,908 h, Functionality: fully functional, machine/vehicle number: 12710008623, travel distance X-axis: 950 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 20,000 rpm, table load: 1,500 kg, The DMG MORI DMU95 monoBLOCK is one of the most accurate, reliable and flexible simultaneous 5 axis milling machines available on the market. The machine has a trunnion style table with a large working envelope to machine components up to 950mm diameter and over 1,000Kg maximum load on the table. This DMU95mb built in 2019 is in very good condition and working order due to its low spindle running hours, and has a comprehensive specification perfect for machining Aluminium or harder materials such as Titanium or Inconel. The machine is available immediately for collection and includes our logistics services to provide you with delivery, install and export licence if required. Specification - Basic Machine - DMU 95 monoBLOCK Universal Machining Centre Control - Siemens 840D with CELOS, 21.5" ERGOline Touch Screen Travel - 950 mm x 850 mm x 650 mm / 37.4 in x 33.5 in x 35.6 in Motor spindle - speedMASTER® 20,000 rpm / 35 kW / 46.9 hp (40% duty cycle) / 25 kW / 33.5 hp (100% duty cycle) Spindle taper - HSK A63 to DIN 69893 Chain magazine - 60 magazine pockets / Tool change system double gripper NC swivel rotary table Table plate C-axis: d 850 x 750 mm / 33.4 x29.5 in, integrated in rigid table 1,000m x 750 mm / 39.4 in x 29.5 in Dkolqsv Dg U Do N Dxrel MPC Machine Protection Control Production Package - Scraper flight conveyor with coolant unit 600 l / 160 gallon Paper band filter Discharge height: 950 mm / 37.4 in / Width: 970 mm / 38.2 in Internal coolant supply - 40 bar / 23 l/min / 580 psi / 6 gpm, through spindle centre (AD) External coolant supply - 4 bar / 58 psi - 40 l/min 10.4 gpm Spray Pistol Oil and emulsion mist separator Renishaw OMP60, infrared measuring probe Blum laser tool measuring 3D quickSET Kinematics kit Electronic Handwheel Screen Display - English

Condition: repair required (used), Year of construction: 1997, Functionality: limited functionality, Used Soraluce model SP 10000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 60-station automatic tool changer and Siemens 840D control system. Serial Number: 108537. YEAR OF MANUFACTURE: 1997. TABLE LENGTH 10000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 8500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 60 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Delqjwgd Rms N Dxrskl Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Coolant system with 500 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Heidenhain linear scales, Linear recirculating slideway system. With 1000mm diameter integrated horizontal/vertical rotary table. LENGTH 14,785 MM WIDTH 4,770 MM HEIGHT 4,420 MM WEIGHT 30,000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: good (used), Year of construction: 2009, Traverses X Y Z: 6300 x 1200 x 2000mm, Table 7000 x 1200mm, B axis 360 degrees via 1 degree increments, Dolq Nswga Rpe Dxrjkl A axis -/+ 45 degrees via 2.5 degree increments, Heidenhain iTNC530, ISO 50 spindle taper, 15,000rpm Spindle Speed, 30 station toolchanger, high pressure through spindle coolant, Interlocked guards, swarf conveyor. New spindle fitted 2025.

Condition: used, Year of construction: 2016, feed length X-axis: 711 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, Traverses X Y Z ; 711 x 406 x 394mm, Table size 864 x 381mm, table load 113 kgs, rapid feedrates 61m/min, spindle power 15Hp, spindle speed 15,000rpm, spindle taper BT40, 18 station ATC, Haas control, coolant, swarf auger. Dkelq Nov Sut Rj Dxrol

Condition: ready for operation (used), Butler Hi – Power Elgamill CNC Bed Type Milling Machine REFURBISHED AND RETROFITTED IN 2012 Model: HI – POWER Elgamill Year: Refurbished and retrofitted in 2012 Control: FAGOR Table Size: 5000 x 1200mm Long Travel: 3300mm Vertical Travel: 1000mm Cross Travel: 850mm Spindle Taper: 50 INT Spindle Speeds: 30 – 2080 RPM Machine with: 26” dia. power rotary table. Dkelq Nswhcbaj Dxrel

Condition: excellent (used), Year of construction: 2014, XYZ SMX 4000 3-Axis CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2014 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Dslet R R Absq N Dxrjkl Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 78806 Serial No: 12168 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1986, Huron KU6 Universal Milling Machine With Heidenhain ND 780 3 Axis DRO Dolq N Dxswgyv Esrskl Table Dimension 2,000 x 420mm (5 'T' Slots). Longitudinal Travel 1,500mm, Cross Travel 700mm, Vertical Travel 470mm. Spindle Speeds 30–2,066rpm. Spindle Taper ISO 40. Feeds Longitudinal & Cross 1.6–820mm/min, Vertical 0.8–410mm/min. S/No. 5816. With Coolant System, Heavy Duty Machine Vice, Interlocked Surround Guarding & E-Stop. Approximate Dimensions 2,850 x 2,100 x 1,800mm, Approximate Weight 4,500kg. Note: Fixtures Not Included.

Condition: used, Year of construction: 1998, Functionality: fully functional, Used Soraluce model SP 8000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 40-station automatic toolchanger and Heidenhain 426 CB control system. Serial Number: 108540. YEAR OF MANUFACTURE: 1998. TABLE LENGTH 8000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 6500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 40 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Varilock R80, Coolant system with 350 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Sliding splash guard system, Heidenhain linear scales, Linear recirculating slideway system. Eimeldingen 2000mm diameter integrated rotary table with additional frontal tables extensions 5000mm x 1600mm. Dkslq Nowgd Rgj Dxrel LENGTH 10,250 MM WIDTH EXCLUDING ADDITIONAL BEDS 4,455 MM HEIGHT 3,800 MM WEIGHT 28,000 KGS

Condition: ready for operation (used), total height: 3,700 mm, controller manufacturer: Heidenhain TNC355, net weight: 24,000 kg, nominal power: 30 kW (40.79 HP), CNC boor- en freesmachine Spindelbeweging: 300 mm Maximale capaciteit: Ø 60 mm (st60) De werkstukhoogte kan worden vergroot als de glijbanen worden gemeten X-beweging: 11 750 mm Y-beweging: 2000 mm Z-beweging: 800 mm Heidenhain TNC 355 besturing Totaal vermogen: 30 kW Longitudinal travel X-axe: 11750 mm Crosstravel Y -axe: 2000 mm Travel Z-axe (Height): 800 mm Max Height of workpiece: 1700 mm (adjust) Power on spindle: 15 kW Djlq N Dswiacksxrskl Admission in millingheadspindle (ISO): ISO 40 Max speedrange: 28 -> 3150 mm

Condition: excellent (used), Year of construction: 2013, operating hours: 1,234 h, Functionality: fully functional, machine/vehicle number: MV 0061-000242, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Please note that this machine is not yet in stock. Hours are to be confirmed. Dslq N Dsv Du Avsxrskl Machine comes with various BT40 Tool holders

Condition: used, X-AXIS MOVEMENT: 800 MM X-AXIS WORK FEED RATE: 10-600 MM/MIN X-AXIS RAPID TRAVEL: 1500 MM/MIN Y-AXIS MOVEMENT: 450 MM Y-AXIS WORK FEED RATE: 10-600 MM/MIN Y-AXIS RAPID TRAVEL: 1500 MM/MIN Z-AXIS MOVEMENT: 250 MM Dkolq Njwg Trgj Dxrol Z-AXIS WORK FEED RATE: 10-600 MM/MIN Z-AXIS RAPID TRAVEL: 1500 MM/MIN TABLE EXTERIOR LENGTH: 800 MM EXTERIOR WIDTH: 300 MM TSLOT SIZE: 12 MM NUMBER OF TSLOTS: 6 DISTANCE BETWEEN: 50 MM MAXIMUM DISTANCE BETWEEN THE VERTICAL SPINDLE AND THE TABLE: 365 MM

Condition: excellent (used), Year of construction: 2020, operating hours: 1,200 h, XYZ 750 LR Vertical Machining Centre (3 Axis) Siemens 828D Control Manufacture & Installed in 2020 Working Table: Working Area 830 x 410mm T Slot Size 3 x 16 x 100mm Maximum Table Load Capacity 500Kgs Machine Stroke: X Axis Travel 750mm Y Axis Travel 440mm Z Axis Travel 500mm Distance from spindle nose to working surface table 100 – 600mm Distance from spindle centre to main column 500mm Spindle: Spindle Taper BT40 Bearing Dia’ Ø60mm Spindle Speeds to 8,000rev/min Feeds: Rapids 20m/min Cutting Feed Rates (XYZ) 1 – 20,000mm/min Linear Rail Slideways Tool Magazine: Capacity 20 Carousel Max’ Tool Weight 7Kgs Tool Change Time (T-T) 8 Secs Drive Motor: Spindle Drive Motor 10HP Coolant 1/4HP Chip Wash 1/4HP General: Door Opening Width: 880mm Overall Dims: 2100 x 2100 x 2655mm Gross Weight: 3500Kgs Supplied with: Siemens 828D Control Renishaw Tool Setting & Probing Remote Electronic Control Handwheel Optimised Digital Servos Rigid Tapping Flood Coolant Worklight 20 Station Carousel Easy Clean Swarf Tray Steel Concertina Guards on all Axis Power Coating Guarding USB Port Compact Flash Drive Card Slot Jet Machinery Stock No: #78752 Machine Serial Number: STP20168 Cost: £34,950.00 + VAT Dkslqorvkn Uo N Dxrsl Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1997, Condition: used, Price: On request - Year: 1997 - Documentation available: Yes - CE mark available: Yes Dkolq N Djwh Shvjxrol - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: 65-P10-CF Zware frees- en boormachine Longitudinale X-beweging van de kolom: 24 meter Kruis Z-verplaatsing van de spindel - diameter: 254 mm - verplaatsing: 2133 mm incl. adapter ISO-60 naar ISO-50 incl. vele verschillende verlengstukken voor spindel- en freeskoppen Kruisbeweging van de kolom in W-richting: 1219 mm (kogelomloopspindel) Totale verticale slag: 3352 mm! Verticale Y-beweging van de kolom: 4572 mm Gewicht machine + draaitafel: 200 ton 4 geharde geleiders geïntegreerde smering Heidenhain CNC-besturing CNC-draaitafel continu: 4500 x 3500 mm Maximaal 60 ton op tafel Dwarsverplaatsing van de tafel: 2000 mm Oppervlakte t-groeftafels: 25.000 x 6.900 mm Gewicht van de T-sleuftafels: 180 ton Longitudinal travel X-axe: 24 000 mm Crosstravel Y -axe: 2133 mm Dkelq Njv Sfnfs Dxrol Travel Z-axe (Height): 4572 mm Power on spindle: 85 HP / 65 kW Admission in millingheadspindle (ISO): ISO 60 (dia 254 mm) Max speedrange: 1,5 > 1200 rpm

Condition: excellent (used), Year of construction: 2012, operating hours: 1,234 h, Functionality: fully functional, machine/vehicle number: MV0061-000073, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Dslq N Dxov Duy Ijrekl Machine comes with various BT40 Tool holders

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 1,000 mm, travel distance Y-axis: 596 mm, travel distance Z-axis: 520 mm, XYZ SMX 4000 3-Axis CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Sold with Tooling as Photographed Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Dolqjwalfro N Dxrskl Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 78920 Serial No: 11568 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1996, total height: 2,750 mm, total width: 3,100 mm, total length: 5,500 mm, Empty weight: 8.400 kg - Year: 1996 - Documentation available: Yes - CE mark available: Yes Dkolq Nswh I Rgs Dxrsl - Serial number: 1107374 - Control: CNC - Transport dimensions: 5500mm x 3100mm x 2750mm (l x w x h) - Transport weight [kg]: 8400kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: ready for operation (used), controller manufacturer: Heidenhain, total length: 6,450 mm, total height: 3,200 mm, net weight: 18,500 kg, total depth: 3,700 mm, CNC indexerende freeskop inclusief chiptransportband Dolq Nowhrxbj Dxrekl 2.5° index Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dimensions clamping space- table: 3360 x 1000 mm Power on spindle: 18 kW Type of millinghead: ISO 50 Max speedrange: 15 > 2000 rpm

Condition: excellent (used), Year of construction: 2014, operating hours: 1,234 h, Functionality: fully functional, machine/vehicle number: MV0061-000288, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Please note that this machine is not yet in stock. Hours are to be confirmed. Dkolqov Du A Ao N Dxrsl Machine comes with various BT40 Tool holders

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, total length: 11,055 mm, total height: 4,140 mm, net weight: 45,000 kg, total depth: 6,320 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Geen fundering nodig! De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Dkelqov Sfmuo N Dxrsl Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC frees- en boormachine / CNC vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC-continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm T-sleuftafels 7600 x 5282 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Dkelq Njv Sfn Ej Dxrel Max speedrange: 6 > 2000 rpm

Condition: ready for operation (used), total height: 2,950 mm, total length: 11,400 mm, net weight: 4,900 kg, total depth: 3,350 mm, - 4-assig industrieel profielbewerkingscentrum - type SBZ 140 - Kan tot 5 zijden van een profiel bewerken - Bewerkingsmogelijkheden: boren, bewerken en draadtappen - Maximale bewerkingslengte met profielkopbewerking: 7480 mm - Maximale bewerkingslengte zonder profielkopbewerking: 7600 mm - De asgestuurde freeskop kan het profiel traploos bewerken op elke positie tussen 0° en 180° met alle beschikbare hulpmiddelen - 8 gereedschappen - 8 beweegbare klemmen - barcodelezer automatisch profielmeetsysteem 2 extra clips compleet materiaal afstandsbedieningsconsole voor SBZ 140 8x verstelbaar klemmateriaal automatische detectie van de klempositie automatische positionering van eindapparatuur microdoseersysteem (gereedschapssmering) veiligheidsafdekking veiligheidslicht centrale spaanafvoer 2x pneumatische nul-aanval apart klemsysteem (shuttle) - Hoek: +90° -90° Nieuwprijs was 189.000 euro Longitudinal travel X-axe: 7900 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 650 mm Dkslq N Dxev Tamrjrjl Power on spindle: 6 kW Admission in millingheadspindle (ISO): HSK-63 F Max speedrange: 24 000 rpm