Condition: good (used), Tool carrier for SK 30 holders Feln Usdm Sulophasgb -made of: polypropylene copolymer -Impact and scratch resistant, insensitive to heat -resistant to: mineral oil and various chemicals -Price: complete

Condition: used, Year of construction: 2010, STS AVANTGARDE MILLING MACHINE YEAR: 2010 5 AXES: 3 + 2 CNC: HEIDENAIN 530 TRAVELS: X: 3,000 mm Y: 1,500 mm Z: 2,000 mm Fsln Uphev Igblsasgb TABLE DIMENSION: 3,200 mm x 1,200 mm MAX. PERMITTED LOAD: 8,000 KG. ATC: N° 24 SPINDLE SPEED: 8,000 RPM CONE: HSK HIGH PRESSURE: 20 BAR CHIP CONVEYOR MACHINE VISIBLE IN OPERATION VARIOUS VIDEOS OF THE MACHINE IN OPERATION AVAILABLE. N.B. : HEAD TO BE OVERHAULED POSSIBILITY OF GIVING IT WITH HEAD OVERHAULED DIRECTLY BY STS.

Condition: used, CNC universal tool milling machine HERMLE type UWF 900 E Machine No. 10829, Year of manufacture 1995 CNC contouring control Heidenhain TNC 415 B NC software 280540, PLC software 277677 06 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 458 mm Spindle mount ISO 40 Distance table to spindle nose 40 to 440 mm Spindle speed 20 - 4000 rpm, continuously variable Feed rate 1 to 3000 mm/min Rapid traverse X and Y = 7 m/min. Z = 6 m/min. Spindle drive 7 kW Quill stroke (vertical head) 60 mm - Spindle speed via 2 gear stages and continuously variable via frequency converter - Hydro-mechanical tool clamping vertically and horizontally Foln Upjwaaqijhajgb - Thread cutting without compensating chuck - Electronic handwheel - RENISHAW 3D scanning head - Coolant system adjacent, capacity approx. 130 liters - Automatic central lubrication system - Fixed angle table - Fully protective cabin - 32,279 recorded spindle operating hours - Pivoting control panel - Operating instructions and electrical diagram Space requirements L x W x H 2700 x 3500 x 2100 mm Weight 3 tons.

Condition: good (used), For sale are various Deckel FP3 milling machines, which are all in good condition. The special feature of this machine is the clamped table, which would be swiveling, rotating or even movable. A purchase of the machine with a "normal" milling table is also possible. The machine has been cleaned and tested by us. If desired, safety devices can also be mounted for an additional charge. L x W x H: approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg TECHNICAL DATA Fjln Uphjiz T Exeaogb Digital display: 3 - axes - digital display travels: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm spindle: Speed range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual feeds & rapid traverses: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid feeds: approx. 1.5 m/min Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: used, Functionality: fully functional, Deckel FP1 Universal Milling Machine Technical Specifications: >> Machine No. 32389 >> Fixed angle table >> Speed: 40 - 2000 rpm >> Feed rate on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 250/150/340 mm >> Vertical and horizontal spindles - MT4 >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and Equipment: Bowevkfpasvvhhholf >> Vice >> Various tool holders >> Coolant system >> Box of milling cutters About the machine: Fgslnjwak Aco Uphaeb Offered is a Deckel FP1 universal milling machine in fully functional condition. Take advantage of the opportunity to view and test the Deckel FP1 on-site under power.

Year of construction: 1994, Condition: good (used), KEKEISEN Universal moving column milling machine UFF 6000/15, YOP 1994, machine-no. F37642, well maintained, good condition 2-axis automatic universal milling head with autom. positioning in 1°-positions tool holder SK50 according to DIN 69871/872 form B Longitudinal travel of the column (X-axis) 6000 mm Vertical travel of the headstock (Z-axis) 1500 mm Transverse travel of the headstock (Y-axis) 1200 mm Table size 6200 x 840 mm, table load 8000 kg Table surface with T-slots 22 mm, spacing 140 mm Spindle speed 20 - 2000 rpm (infinitely variable in 2 ranges) Axis speeds 4 m/min or 10 m/min (rapid traverse) CNC control Heidenhain TNC 415 with electr. handwheel HR130 Complete 2nd user interface on the operator's platform that travels with the machine 3D touch probe m&h radio-controlled Fjln Uponuda Ajhaogb Tool changer 40 places max. Ø 250 mm, max. 400 mm long Coolant unit (also IKZ, max. 10bar) with 800 l tank + drum filter cladding of the machine table, with chip conveyor between bed and table without fixators, without installation and commissioning Connection data 400 V; 50 Hz; approx. 57 kVA Price: on request, plus VAT Pricing: ex works, delivery time: short term by agreement

Condition: good (used), Tool carrier for SK 40 holders -made of: polypropylene copolymer -Impact and scratch resistant, insensitive to heat -resistant to: mineral oil and various chemicals -Price: complete Fgoln Usdm Supsphajb

Condition: used, Milling Machine Manufacturer: DECKEL Type: FP2 Technical Specifications Manufacturer: DECKEL Model: FP 2 Table Size: 700 x 330 mm X-Axis: 490 mm Y-Axis: 390 mm Z-Axis: 200 mm Spindle Mount: ISA 40 18 Spindle Speeds: 40 – 2000 rpm 18 Feed Rates: 8 – 400 mm/min Motor Power: 2.2 kW External Dimensions: Approx. W1100 x D1400 x H1600 mm Weight: Approx. 1100 kg Feln Uphov Uzztjajgb Equipment • 3-Axis Digital Readout ACU-RITE • Various Collets • Accessory Package as shown in photos All information is subject to change. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 2012, Milling machines Travel distance X: 635 mm Travel distanceY :510 mm Travel distance z: 460 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Heidenhain TNC 530 spindle chuck: SK 40 spindle revolutions: 18000 rpm table size X: 790 mm table size Y: 560 mm max. workpiece weight: 600 kg tool changer: 60 - time Fjln Uov Tx Twephaegb input Power : 13 kW spindle cooling chip conveyor incl. pallet changer incl. measuring probe

Condition: good (used), For sale are various Deckel FP3 milling machines, which are all in good condition. The machine was cleaned and tested by us. If desired, safety devices can also be mounted for an additional charge. Fgjlnoiz T Euj Uphasb L x W x H: approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg TECHNICAL DATA Digital display: 3 - axes - digital display travels: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm spindle: Speed range: approx. 40 - 2000 rpm Tool holder: ISO 40 Cjjvhhya2v Drive power: approx. 3.8 kW Tool clamping: manual feeds & rapid traverse: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid feeds: approx. 1.5 m/min Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, Hermle UWF 802M universal milling machine with HS 401 linear control. Excellent condition! Technical Specifications: >> Year of manufacture: 1994, Machine No. 10768 >> Fixed angle table >> Speed: 17 to 3550 rpm >> Continuous feed in 3 axes from 0 to 1600 mm/min >> Drive power: 6 kW >> Travels X/Y/Z: 500/430/400 mm >> Vertical and horizontal spindles - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Dimensions: Length 1.8 m, Width 1.8 m, Height 1.9 m Accessories and Equipment: >> HS 401 linear control system >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication system >> Spindle brake >> Technical documentation, spare parts plans, control operating instructions, and programming examples About the machine : Fjln Uswag Unsphaegb Offered is a Hermle UWF 802M tool milling machine with HS401 linear control. This universal milling machine is in very good condition. Its linear control is very easy to operate. Length and radius corrections are possible in the program. No extensive CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically tested by us. Take advantage of the opportunity to view and try out the Hermle on-site under power.

Condition: used, Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 9244/158, feed length X-axis: 870 mm, feed length Y-axis: 330 mm, feed length Z-axis: 480 mm, travel distance X-axis: 870 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 480 mm, feed rate X-axis: 3,000 m/min, feed rate Y-axis: 3,000 m/min, feed rate Z-axis: 1,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, quill stroke: 75 mm, rapid traverse X-axis: 3,000 m/min, rapid traverse Y-axis: 3,000 m/min, rapid traverse Z-axis: 1,000 m/min, table width: 320 mm, table length: 1,300 mm, rotational speed (max.): 30,000 rpm, rotational speed (min.): 55 rpm, table load: 300 kg, overall weight: 2,700 kg, PEDERSEN VPF-940TI with Heidenhain TNC 320 – Top Condition from Training Workshop Used PEDERSEN VPF-940TI CNC milling machine (2014 model) from a school's training workshop. Good condition, no maintenance backlog, immediately available and ready for demonstration. Equipment: • Heidenhain TNC 320 control • SK 40 DIN 2080 / 7.5 kW / 55–3000 rpm • Travels: X/Y/Z = 874 / 337 / 480 mm Fjlswa S Itjn Uphasgb • Work table: 1300 x 320 mm • Air-operated glass scales • Stainless steel coolant tank • Manual + CNC operation at the touch of a button • Hi/Lo gears, mechanical handwheels Condition: Well-maintained, regularly used (training company) Availability: Immediately, ex works, packaged PEDERSEN VPF-940TI, TNC 320, Heidenhain, used CNC milling machine, universal milling machine, tool milling machine, manual CNC milling machine, SK40 milling machine, training machine, school milling machine, milling machine with glass scales, milling machine with coolant system, milling machine from stock Milling machine available immediately, milling machine

Condition: excellent (used), Year of construction: 2018, CNC control: Fanuc Series Oi-MF New machine, only 150 spindle hours - Flat guideways - Gearbox - Internal cooling - Various tool holders and 1 vise Travel paths X-travel 850 mm Y-travel 530 mm Z-travel 530 mm Spindle nose (to table surface) 100-630 mm Spindle axis to column surface 590 mm Table Table size 530 x 950 mm Maximum table load 800 kg T-slots (W x NO. x P) 18 x (5) x 100 mm Spindle Spindle speed 8000 rpm Spindle mount BT-40 Spindle power 7.5/11 kW Feed rate Rapid positioning speed 20 / 20 / 20 m/min. Fsln Uowa Ip Hsphaegb Cutting feed rate: 1 – 10,000 m/min. Automatic tool changer Number of tools: 24 Tool taper: BT-40 MAS Tool holder bolt: P-40T (45°) Max. tool diameter: Ø 80 mm Max. tool diameter (no adjacent tool): Ø 150 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool change time (tool to tool): 2.5 sec Tool change time (chip to chip): 6 sec Machine dimensions: Floor area: 2450 x 2700 mm Machine weight: 6000 kg Max. machine height: 2900 mm Air supply connection: 7 kg/cm2

Condition: new, Year of construction: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain TNC 128 control system Paths X/Y/Z = 610/400/450 mm Speed 1-4500 rpm Power 8.5 kW at 100 % ED Fgslnjuf Sv Do Uphajb Spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 Fixed angle table 800x 425 mm 6 x 14 H7 T-slots coolant device 66 liters electric handwheel HEIDENHAIN HR 510 FS Further technical data is available on request. The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available and can also be inspected. Please register in advance.

Condition: good (used), Ball turning device, ball turning device, universal ball turning device Fgeln Upjv Sqttshasb -Manufacturer: Bilz, Universal ball turning device size 1 -Turning Ø: 0-80 mm -Dimensions: 440/260/H230 mm -Weight: 19.7 kg

Condition: repair required (used), machine/vehicle number: 1431505, The bevel gears on the vertical milling head must be replaced. Fgeln Upetrlmxehasb

Year of construction: 1969, Condition: used, machine/vehicle number: 304, Manufacturer: Hermle Model : FW 800 Machine No. : 304 Year of manufacture: 1969 Weight: approx. 1000 KG General / technical data: well preserved used horizontal milling machine with hydraulic program control (cam control bar) for automatic production process. admission: SK 30 travel: X 400mm Y 370mm Z 165mm Speed: 18 pieces mechanically switched in 2 motor steps 85, 120, 145, 180, 205, 280, 300, 400, 470, 590, 680, 840, 100, 1210, 1420, 1780, 2030, and 3050 rpm Fjljdgrwdsn Uphasgb feeds: in X and y axis stepless hydraulic in z ( horizontal milling spindle) manual table dimensions (rigid table): 800mm x 220mm power supply / spindle motor power: 380Volt 50 HZ / 1,5 KW approx. space requirement of the machine: 1900mm x 1100mm x 1700mm (bxtxh) Accessories / special equipment: - Rigid fraestable - Item various tool holders - spittoon - cooling device - Machine documentation with program instructions Remarks The machine is in a very good condition according to its age. The machine is preferably designed for the production of small and medium series. The machine has a simple hydraulic program control controlled by a cam switch.

Condition: like new (used), Year of construction: 2000, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-410-M Technical features Dimensions Table dimensions: 2000 x 700 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis Fjlewacbwsn Uphaogb X axis traverse: 2000 mm Y axis traverse: 800 mm Z axis traverse: 800 mm Milling head Head type: Universal manual (U22) Tool clamping system: Hydraulic Taper nose: ISO 50 (DIN2080) / Pull stud: DIN 69872 Speed range: 20 - 3000 rpm Spindle power: 17 kW Feedrates Feedrate: 5 - 5000 mm/min Rapid feedrate: 12000 mm/min Weight and dimensions Maximum weight on table: 4000 kg Machine weight approx.: 9500 kg Machine dimensions approx.: 5265 x 3250 x 2760 mm Accesories External coolant Electronic handwheel: HR-130 New foot clamping tool pedal. Guarding and new perimetral safety fence installation Sales conditions Warranty: 6 months mechanical parts Sale conditions and price: On request View all technical features

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. Optimill F 200 ECO Premium CNC milling machine, directly from the manufacturer. F 200 ECO - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by performance, speed, precision, and a long service life. Model F200 ECO Control SIEMENS SINUMERIK 828D PPU271.5 Milling spindle belt drive Machine data Electrical connection 400 V / ~50 Hz Total connected load 20 kVA Milling spindle Drive motor S1 operating 9 kW Drive motor S1 operating 57 Nm Drive motor S6 operating 30% operating 17.1 kW Drive motor S6 operating 30% operating 118 Nm Spindle mount BT40 Drive motor S1 operating 10.5 kW Drive motor S1 operating 50 Nm Drive motor S6 operating 30% operating 26.4 kW Drive motor S6 operating 30% operating 125 Nm Cooling lubricant system Coolant pump power 3 x 1 kW Max. flow rate 35 l/min. Tank capacity: 200 liters Cleaning pump Cleaning pump power: 530 W Milling precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool changer: Double-arm gripper type Number of tool stations: 24 Max. tool diameter: 78 mm Max. tool diameter (adjacent tool positions not occupied): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time: tool to tool: 2.5 seconds Travel path: X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed drive: Rapid traverse: X-, Y-, Z-axis: 48 / 48 / 48 m/min. Motor torque X / Y / Z-axis 16 Nm / 16 Nm / 20 Nm Feed forces X / Y / Z-axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds* 8,000 rpm Pneumatics Compressed air 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle to table 100 - 650 mm Table length x width 1,000 x 500 mm T-slot size / number / spacing 18 mm / 5 / 100 mm Maximum payload 500 kg Dimensions Length x width x height 2,400 x 2,355 x 2,860 mm Total weight 5,500 kg Equipment Shown with optional accessories Chip conveyor Linear guide with recirculating ball screw for high rapid traverse speeds in all axes Telescopic guide rail covers on all three axes Automatic lubrication Portable electronic handwheel with enabling switch and emergency stop button RJ45 connection and 230 V power connection Fsln Upswbc Aqjhaogb Machine light in the work area Cleaning gun Ball screws and linear guides from THK Chip flushing system Cooling on the spindle head (cutting area) Control cabinet Arm-mounted tool changer SW24 CE

Condition: ready for operation (used), Year of construction: 1983, x-travel 560 mm y-travel 450 mm z-travel 450 mm Control Dialog 4 total power requirement 6 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 3*3*2,5 m Folnov Uq U Ao Uphajgb

Condition: good (used), Bezel, steady rest, lynette Foln Upjv Sqmtehasgb -Clamping tool: clamping bracket -Clamping width: 268 mm -Groove width: mm -Dimensions: see photo technical drawing -Dimensions: 285/85/H180 mm -Weight: 10.8 kg

Condition: excellent (used), travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, position of the milling head: universal, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, table length: 6,000 mm, table width: 1,000 mm, worktable width: 1,000 mm, worktable length: 6,000 mm, Milling machine / universal center with fixed table ANAYAK HVM 6000 with HEIDENHAIN iTNC 530 HSCI control (complete electrical and mechanical retrofitting 2016 worth 200,000 euros). X 5300 Y 1200 Z 1500 mm strokes A-axis from -174º to +180º (rotation of the head body) B-axis -177.5º to 180º (front of the milling head - horizontal or vertical), 3000 rpm, SK50, multi-angle head, ATC 30 tool positions, 6000 x 1000 mm table, tool station and chip extractor. Top working condition Folnoqi Ufxe Uphasgb

Year of construction: 1967, Condition: good (used), WKG 234 Offered here is a rotary table milling machine from the company Müller of the type Duo Främatic. 
Technical data: Manufacturer: Müller Type: Duo Främatic Year of construction: 1966 Tool holder: ISO 50 Round table clamping surface inside: 650x1490mm travel: endless rotary small feed: 100mm/min large feed: 2000mm/min max. rotational speed: 650 rpm low speed: 88 rpm Fgslneg Ummae Uphasb speeds: 8pcs weight: 5t milling spindles: 2 pieces distance table to spindle: 350mm power requirement: 27kW Remark: Suitable for carbide cutter heads (ø315mm) for light metal up to ø400mm. cutter lifting automatically with 1mm possible quill adjustment each 100mm drive of milling spindle separately possible There are several machines available!

Condition: excellent (used), Year of construction: 1999, ZAYER Column-Traveling Bed-Type Milling Machine Type:30KCU 10 000 Year:1999 Control:HEIDENHAIN TNC430 XYZ travel:10000x1500x2700mm Fgjlsv U I S Eon Uphaob Spindle speed:35-3000rpm Toolchanger:60atc Rotary table:2500x2500mm, cross travel:1300mm Machine weight:42000kg Floor plates not being sold Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 350 mm z-travel 140 mm table surface area 700 x 300 mm spindle taper ISO 40 spindle turning speed range 100 - 4000 U/min distance spindle center to column 395 mm distance spindle nose and table min. 170 -max. 550 mm control TNC 407 milling feeds 3 + 2000 mm/min Fgjlnjtv Idxs Uphasb rapid traverse 5000 mm/min spindle drive 5,5 kW total power requirement 9 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407,