Used Chiron Machining Center for sale (108)

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 231-26, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 950 mm, table length: 1,200 mm, rotational speed (max.): 10,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 840 D X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle Spindle speed per spindle: 10,000 rpm Tool holder: HSK 63 Tool changer per spindle: 10-station Table Clamping area: 1,200 × 950 mm MACHINE DETAILS Dimensions: 5.0 x 4.0 x 2.8 m Weight: 8.5 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 63 A Connected load: 41 kVA EQUIPMENT - Coolant system from KNOLL Gelhccowd Sd Njqmsit - Chip conveyor from KNOLL - Machine vises not included. Transportation on a standard truck is possible.

Condition: used, Year of construction: 2000, Number of axles 4 St. 2 Gslhccqswhq Diemeit tool change unit 20 Plätze spindle turning speed range 20.000 U/min control Siemens 840 D tool taper HSK 63 weight 6670 kg 143-68

Condition: good (used), Year of construction: 2006, CHIRON CNC Vertical Machining Centre Type:MILL2000 Year:2006 Control:HEIDENHAIN TNC530 XYZ travel:2000x500x500mm Spindle speed:10000rpm Spindle taper:BT40 Toolchanger:24atc Machine weight:7800kg Coolant through spindle Golhcswic Ipecqmeit With swarf conveyor With cooling unit Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, Additional: Software and hardware enhancements: Two additional pneumatic connections on the table. (These can be controlled.) Y-axis extended from 500 mm to 570 mm Light and acoustic indicator at program end or interruption Additional rapid traverse switch on the control system Data transfer to the machine manufacturer possible Gelhccewf R Ngjqmeit Renishaw measuring probe with calibration program Shopmill enhancements. Software extension - kinematics Hydraulic clamp seals for A-C axes completely replaced 2 years ago (ssler) Spindles of the XY axes were replaced approximately 5 years ago. Main spindle completely re-bearing including new collet (2025) Original transport equipment is available Year of manufacture: End of 2008 Machine is in good condition FYI: Machine is used for the production of small to medium-sized system and molded parts.

Condition: good (used), Year of construction: 2007, Functionality: fully functional, 5-Axis CNC Machining Center CHIRON - FZ 15 S High Speed Year of Manufacture 2007 FANUC Series 18i Control Technical Details X-Travel 550 mm Y-Travel 400 mm Z-Travel 425 mm Main Spindle: Speed Range 20 - 12,000 rpm Main Spindle Drive Power 7.5 / 22 kW Max. Torque 140 Nm Tool Holder HSK 63 A Fixed Table: Table Clamping Area 1,050 x 450 mm Max. Table Load 500 kg T-Slots 2 x 18 H12, 1 x 18 H8 NC Rotary Table: Table Clamping Area 610 x 240 mm Center Height 165 mm Faceplate Diameter 160 mm Bore 4x M10 Tool changer: Number of tool positions: 20 Max. tool diameter: 65 mm Giolhccqowhxc Tomst Max. tool diameter with free adjacent tool box: 175 mm Max. tool weight: 2.5 kg Chip-to-chip change time: 2.1 sec Tool-to-tool change time: 0.9 sec Feed rates: Rapid traverse (X / Y / Z) 60 m/min Acceleration: 1 g Drilling capacity in St 60 - solid drilling: 36 mm Tapping M 24 Material removal rate: 300 cm³/min Total power requirement: 18 kVA Machine weight: approx. 7.0 t Space requirement: approx. 4.5 x 2.5 x 3.2 m

Condition: used, Year of construction: 2005, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: FANUC, controller model: 18I MB, total height: 2,500 mm, spindle speed (max.): 9,000 rpm, space requirement length: 5,357 mm, space requirement width: 3,202 mm, CONTROLS .. CNC controls FANUC 18I MB WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 2000 mm .. Y-axis travel: 500 mm .. Z-axis travel: 550 mm SPINDLE / HEAD .. spindle revolutions (max): 9000 /min TOOL MAGAZINE Gieljwha Tmohccqmjt .. number of positions: 24 .. tool diameter max.: 75 mm .. - with free neighbour positions: 160 mm .. tool length max.: 320 mm .. tool weight max.: 4 kg .. tool changing time: 15 s AUTOMATIC WORKLOAD EQUIPMENT .. number of store positions: 24 DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5357 mm .. space requirements -front/back-: 3202 mm .. total height: 2500 mm including chip conveyor Duty cycle 53'700h Spindle hours 26'400h Tool holder 5 pieces The following auxilliaries can be bought seperately at additional cost: Röhm double clamps Torsion springs for tool holders 50 pieces Tribos-S Polygon chuck with diameter 6,8,10,12,16 Lathe chuck diameter 12,20,32 SK40 Tightening bolt with hole

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 650mm/400mm/650mm, speed: 12000rpm, turret: basket change system, tool positions: 20, tool holder: SK40, max. table load: 2x400kg, table dimensions X/Y: 2x 850mm/450mm, rapid traverse X/Y/Z: 40m/min. Machine dimensions X/Y/Z: 4000mm/3800mm/3250mm, weight: approx. 9100kg, control: Siemens Sinumerik 810M, power-on hours: 6100h, operating hours: approx. 2995h. Including shuttle table workpiece loading with a 4-rotary axis Peiseler, extraction and filter system Filtermist FX 6002, cooling lubricant system Knoll 400 K-1, year of manufacture: 2001, pressure: 70bar, drum filter and tool holders. Documentation available. On-site inspection is possible. Gslhccswi Tpweqmsit

Condition: excellent (used), Year of construction: 2014, operating hours: 13,800 h, Chiron DZ 08 FX Twin-Spindle Machining Center X-axis travel: 450 mm Y-axis travel: 270 mm Z-axis travel: 310 mm Spindle: Speed: 18,000 rpm Clamping set: HSK-A40 Lubrication: Grease Swivel axis: Swivel angle: +-100° Repeatability: +- 5" Position measuring system: ECN 225 Max. transmittable torque: 440 Nm Speed: 100 rpm Holding torque: 410 Nm NC rotary table: Faceplate diameter: 245 mm Giolhcswgn D Rscqmet Thread and bore pitch: M16 x 15 Repeatability: 5" Position measuring system: ECN 225 Max. transmittable torque: 180 Nm Holding torque: 410 Nm Max. load capacity: 80 kg Speed: 200 rpm Weight: 4500 kg SCOPE OF OFFER INCLUDES (list is not exhaustive): Chiron twin-spindle machining center Absolent oil mist separator High-pressure system Chip conveyor Oil cooler Measuring probe Set of HSK-40 tool holders Complete operating documentation Exact scope of offer as shown in the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: ready for operation (used), Year of construction: 1994, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, overall weight: 5,500 kg, Fanuc OM double Nikken divider 40 spindle, 20-tool changer 2 tables Gislhjv I U T Njccqmet chip evacuator

Year of construction: 1998, Condition: excellent (used), Vertical machining center CHIRON FZ 12 W Magnum High Speed 1998 Manufacturer CHIRON type FZ 12 W Magnum High Speed year of manufacture 1998 Gelhccqolnka Djmoit Control Sinumerik x-way 550 mm y-way 300 mm z-way 425 mm rapid traverse30m/min spindle mounting ISO SK 40

Condition: good (used), Year of construction: 2011, Functionality: fully functional, 5-Axis CNC Machining Center CHIRON - FZ 15 S High Speed Gijlhccqewhv E Eomst Year of manufacture 2011 FANUC Series 31i control system Technical details X travel 730 mm Y travel 400 mm Z travel 425 mm Main spindle: Speed range 20 - 12,000 rpm Main spindle drive power 7.5 / 22 kW Max. torque 140 Nm Tool holder HSK 63 A Fixed table: Table clamping area 1,050 x 450 mm Max. table load 500 kg T-slots 2 x 18 H12, 1 x 18 H8 NC rotary table: Table clamping area 610 x 240 mm Center height 165 mm Faceplate diameter 160 mm Bore 4x M10 Tool changer: Number of tool positions: 20 Max. tool diameter: 65 mm Max. tool diameter with free adjacent tool box: 175 mm Max. tool weight: 2.5 kg Chip-to-chip change time: 2.1 sec Tool-to-tool change time: 0.9 sec Feed rates: Rapid traverse (X / Y / Z) 60 m/min Acceleration: 1 g Drilling capacity in St 60 - solid drilling: 36 mm Tapping M 24 Material removal rate: 300 cm³/min Total power requirement: 18 kVA Machine weight: approx. 7.0 t Space requirement: approx. 4.5 x 2.5 x 3.2 m

Condition: excellent (used), Year of construction: 2023, travel distance X-axis: 210 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 360 mm, controller manufacturer: SIEMENS, controller model: 840D SL 4.8, overall weight: 6,000 kg, spindle speed (max.): 40,000 rpm, space requirement length: 8,500 mm, space requirement width: 2,500 mm, CONTROLS .. CNC controls SIEMENS 840D SL 4.8 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 4 .. X-axis travel: 210 mm .. Y-axis travel: 270 mm .. Z-axis travel: 360 mm SPINDLE / HEAD .. spindle revolutions (max): 40000 /min .. tool fixture: HSK A40 TOOL MAGAZINE .. number of positions: 72 AUTOMATIC WORKLOAD EQUIPMENT .. workpiece manipulator: articulated robot .. number of store positions: 36 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 8500 mm .. space requirements -front/back-: 2500 mm .. total weight approx.: 6000 kg ATTACHMENTS Gijlhccqjwg E Rusmot .. central lubrication system: yes .. chip conveyor: yes .. coolant unit: yes .. through spindle coolant attachment: yes .. European CE standards: yes -Siemens tool management with retooling -Fanuc Automation Robot M-10IA -Operating hours: 7,200 h - of which spindle 1 original, spindle 2: 3896 h

Condition: used, Year of construction: 2011, operating hours: 30,700 h, Functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 450 mm, feed length Y-axis: 270 mm, feed length Z-axis: 310 mm, controller manufacturer: Siemens, spindle speed (min.): 15,000 rpm, operating hours of spindle: 30,700 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 24, Vertical CNC machining center FZ08K W Magnum Drilling capacity in St60 Ø 16 mm Tapping Ø 16 Milling capacity in St60 60 cm³/min Digital main drive with spindle Air-operated, with tool clamp monitoring 2.2 kW at 100% duty cycle 7.2 kW at 25% duty cycle Travel paths X = 450 mm X = 270 mm Z = 310 mm Tool changer Pick-up chain magazine 24 positions HSK-A 40 DIN 69893 Workpiece changing device 0/180° Clamping surface 2 x 660 x 350 mm Gijlhsv U Um Aoccqmot With thread and locating holes M16 Ø15H7 Digital feed drive for X, Y, and Z axes With direct drives and Indirect absolute position measuring systems Siemens CNC 840D Windows XP Termocontrol Signal light Coolant system KF 150 / FKA 500 Connection 4x hydraulics / 2x pneumatics High-speed package Rapid traverse speed 70 m/min in the X, Y, and Z axes Acceleration 1.0 g in the X-axis – 1.5 g in the Y-axis – 2.0 g in the Z-axis Speed: 15,000 rpm Chip conveyor Rotary table package AWUP100 – 4th axis Measuring probe Renishaw OMP 40-2LS Scale package in all axes Extraction unit with air purifier

Year of construction: 2010, Condition: excellent (used), Chiron FZ 08 KS MAG High Speed Plus Machining Center 1. TECHNICAL DATA Drilling capacity in steel: ⌀ 12 mm thread: M8 Milling capacity in steel: 30 cm3/min tool stations: 24 Spindle nose: HSK-A 40 Max. tool diameter: 47 mm / 100 mm Max. Tool length: 160 mm Max. Tool weight: 1.2 kg Chip to chip change time: 2.1 s Speed, main spindle: 30`000 rpm Max. Torque: 11 Nm Spindle power: 9 kW Off-bar package Speed: 8000 rpm Max. torque: 14,3 Nm Bar passage: 32 mm Bar feed, stroke: 460 mm X-axis: 450 mm Gslhcjiy D Tmecqmeit Y-axis: 270 mm Z-axis: 310 mm Max. feed force / X and Y axis: 2000 N Max. feed force / Z-axis: 3000 N Rapid traverse (X,Y and Z axis): 75 m/min NC swivel head, swivel range: -20° / +115° rapid traverse, B-axis: 60 rpm Floor space requirement: 2.3 m2 Weight: approx. 4000 kg For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: excellent (used), Year of construction: 2005, operating hours: 22,800 h, machine/vehicle number: 238-20, Chiron FZ15S machining center With Siemens control YEAR OF MANUFACTURE: 2005 Operating hours 22 800 Travel distance X: 550 mm Y: 400 mm Z: 425 mm A: +/- 100° Traversing speed rapid traverse X/Y/Z: 40 m/min Speed: 20-10,500 rpm Tool positions: 20 Table load: 300 kg Giolhorpk Ttsccqmjt Coolant volume: 400 liters Coolant pressure: 2.5 bar with chip conveyor

Condition: used, Functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FZ 08 W M h.s. + FANUC LR Mate robot Used - Working Gelhccowglm Noqmjit Can be inspected and tested as it is currently still connected to the power supply! PRICE NEGOTIABLE

Condition: good (used), Year of construction: 2006, Spindle 12000 TR:MN CN SIEMENS SINUMERIK 258-38. Gijlhcon D D Nhscqmet Number of hours on the counter: 85 642 hours total machine power 30 KVA stroke X 300 mm, stroke Y 400 mm, stroke Z 425 mm spindle speed 12000 rpm travel speed 60m/min tool attachment SA40 2 UNITS AVAILABLE

Condition: good (used), Year of construction: 2022, travel distance X-axis: 210 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 360 mm, controller manufacturer: SIEMENS, controller model: 840 D SL, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, CONTROLS .. CNC controls SIEMENS 840 D SL WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 4 .. X-axis travel: 210 mm .. Y-axis travel: 270 mm .. Z-axis travel: 360 mm SPINDLE / HEAD .. spindle revolutions (max): 40000 /min .. tool fixture: HSK A40 TOOL MAGAZINE .. number of positions: 64 Gslhccqswfg Ifomjit AUTOMATIC WORKLOAD EQUIPMENT .. workpiece manipulator: articulated robot .. number of store positions: 32 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 9000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. closed cabin: yes Operating hours: Spindle 1: 4050 h, Spindle 2: 11,114 h Internal cooling 70 bar Fanuc Automation Robot M-10IA Integrated workpiece changing device Knoll coolant tank Knol KF 400/900

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 182-69, No reserve price - guaranteed sale to the highest bidder! Gielhccqewczxtomet TECHNICAL DETAILS Connected load: 10 kVA Operating voltage: 3 x 400 V Weight: 4,000 kg Specifications according to manufacturer - no guarantee Travel X / Y / Z: 550 x 300 x 425 mm Tool changing system: Change arms Spindle speed: 10,000 rpm Control system: Siemens Sinumerik Installation dimensions: 3.3 x 2.9 x 3.1 m Transport dimensions on pallet: 3,550 x 2,240 x 2,450 mm

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 490-91, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller model: Siemens Sinumerik 810, table load: 1,200 kg, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 400 mm Z-axis travel: 425 mm Control: Siemens 810 Table Clamping area: 1,150 x 460 mm Table load: max. 1,200 kg Distance from spindle center to column: 435 mm Gslhccqjv Sz Dcomjit Spindle / Tool holder Tool holder: SK40 Tool changer: 19-station Spindle torque: 60 Nm EQUIPMENT - 4th axis available

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm Gijlou Idnmjhccqmet z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: good (used), Year of construction: 1999, CNC vertical machining center CHIRON type FZ 22 L Machining center with CNC control SIEMENS 840-D Series Traversing distance X: 2600 mm, Y: 520 mm, Z: 630 mm Gjlhccjlp Rl Aeqmeit Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool-to-tool change speed 2.0 sec. Distance spindle - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Machine weight approx. 7.5 tons

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Siemens, controller model: 840 D SL, Spindle Speed : 15.000 rpm Power : 40 kW Tool holder : HSK-A 63 Tool changer : 32 stations Working area Traverse path X : 550 mm Travel Y : 400 mm Travel Z : 400 mm B-axis Swivel angle : +/- 120 Swivel axis resolution : 0.0001° Repeat accuracy : +/- 5'' Speed : 50 rpm C-axis Faceplate : 280 mm Repeatability : +/- 5'' Speed : 200 rpm Drive : Torque motor general Tool change time : 0.9 sec Rapid traverse (X/Y/Z) : 75 m/min Axis acceleration (Y/Y/Z) : 1.0 - 1.5 - 2.0 g Gislhccqetpm R Iomjt Equipment Coolant supply : Internal cooling 30 bar Coolant cleaning : Compact paper belt filter KF 150 Oil mist extraction : Extraction unit with air cleaner Workpiece measurement : Blum measuring probe Tool measurement : Renishaw Software : Kinematics Fit

Condition: excellent (used), Year of construction: 2014, operating hours: 50,846 h, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 551 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Siemens 840D SL, overall weight: 12,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, rotational speed infinitely variable, Working area: 3000mm (X), 630mm (Y), 550mm (Z) Rapid traverse: 60 m/min Spindle speed: 12,000 rpm Tool holder: HSK-A 63 Tool positions: 24 Tool diameter: 75mm (normal), 160mm (free positions) Gjlhovvctyeccqmeit Maximum tool length: 320mm Coolant supply: 20 bar at 20 l/min Control: Siemens 840D SL Weight: 12 tons Operating hours: 50,846 Automatic doors Pneumatically controlled 4-axis Prepared for A and U-axis Hawe hydraulic unit 2x extraction With accessories such as spray guns, coolant system, chip conveyor as well as operating instructions, circuit diagram and hand control bar. - - Clamping devices and tools are not included.

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, controller manufacturer: Beckhoff, Spindle Speed: 60,000 rpm Spindle power: 0.625 kW Gielsvyp Ewshccqmet Torque: 10 Nm Tool holder: HSK-EZ15 Number of tools: 60 Working area Travel X: 78 mm Travel Y: 56 mm Travel Z: 50 mm B-axis: -110° to +110° C-axis: 400 rpm Chip-to-chip time: 3.5 sec Rapid traverse: X/Y/Z 30/30/30 m/min Workpiece changing device Technology: Zero-point clamping system Workpiece changing time: 10 sec Max. table load: 10 kg Accessories Chip management: Chip trolley Coolant management: Coolant system Workpiece measurement: Renishaw measuring probe – RMP24-micro Tool measurement: tool length measurement / breakage Other: Automation Feed 5