Used Weiler Md 260 for sale (194)

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Godoxv A I Tjpfx Ahvsbw Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - Safety chuck key - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Year of construction: 1977, condition: ready for operation (used), A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible. Gbsdpfxjxqqmts Ahvow

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Gbsdpfxjvtthio Ahvsw Machine dealer with own stock of 1600 m².

Year of construction: 1973, condition: excellent (used), turning length 125 mm Gjdpfx Aexpxqwehvjbw weight of the machine ca. 0,4 t

Condition: good (used), used -- 6-fold changer for WEILER , type 260 Gbjdpfjxdixnsx Ahvew

Condition: used, Technical data : Center width approx. 500 mm Center height above bed 125 mm 16 speeds from 125 - 2800 rpm Gsdpfxsxq E Dmo Ahvjbw Space requirement, length x width 1.2 x 0.6 m Estimated weight approx. 450 kg . Scope of delivery : Hand lever quick clamping device Electrical monitoring of whether the part clamping lever is in the open or clamped position 1 set of collets from 3.0 - 25.0 mm, increasing by 1 mm Cross support with two tool holders Turret with 6 tool holders .

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 spindle bore 24 mm tailstock quill taper MT 3 weight ca. 400 kg Gbjdewa Dz Eepfx Ahvow dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; collet chuck device incl. collets 1-20 mm with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown

Condition: good (used), WEILER PRIMUS Type - MD-G -Center height 125mm -Center width 400mm -Speed range 40-3000 rpm Gbsdpfx Aewm Hx Tohvew -Spindle bore 24mm -Electric chuck guard -Multifix with inserts -Tailstock with drill sleeve -Four-jaw chuck -Work light -Bed stop Dimensions: LxWxH 1.3x0.8x1.6 meters / Weight 450kg Errors and input errors excepted

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Gsdpfxehtnu Tj Ahvobw

Condition: used, Year of construction: 1992, machine/vehicle number: 160 3205, Sale only within EU member states! No private sale MAE can be inspected. All warranty rights are excluded. Gbedpsuxl Ezofx Ahvjw For the correctness of the technical data and year of construction, for the completeness of accessories and tooling, as well as for compliance with all safety and environmental protection safety and environmental protection requirements. Any warranty is excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tools as well as for compliance with all safety- and environmental-requirements, mentioned in the accident prevention regulations, we take over no guarantee.

Condition: good (used), WEILER DA 260x1000 Center Lathe Digital Display - Three Axes "NEW" -Center Height 260mm -Turning Diameter Over Bed 535mm -Turning Diameter Over Cross Slide 345mm -Center Width 1000mm -Spindle Bore 71mm -Speed Range 33 - 1500 rpm -12 Spindle Speeds via Gearbox -Automatic Longitudinal / Cross Feeds -Threading / Metric / Inch / Diametrical -Tailstock MK 4 -NEW THREE-AXIS DIGITAL DISPLAY -Drive Power 7.5 kW -Face Spindle Nut "NEW" -Multifix Base Holder with Insert -Three-Jaw Chuck 350mm -2 Emergency Stops -Electric Chuck Guard "NEW" Godpfewiztwjx Ahvebw -Chip removal panel -Coolant system -Drill chuck -Documentation Dimensions: LxWxH 2.7 x 1.5 x 1.7 meters / Weight 1700 kg Subject to errors and omissions

Condition: used, Year of construction: 2008, turning diameter 720 mm turning length 3000 mm centre height 360 mm spindle bore 106 mm turning speed range 1 - 1800 U/min tailstock quill taper MT 6 Gbjdpfjw A Sqmsx Ahvjw workpiece weight max. 3800 kg total power requirement 36 kW weight of the machine ca. 6100 kg dimensions of the machine ca. 4800 x 2450 x 2000 mm CNC lathe - cycle-controlled Equipment: - Chip conveyor - Coolant device - 3-jaw chuck Ø630 mm - MUTLI-FIX quick-change holder - Live center - Machine light

Condition: good (used), Originating from a school. Nice and complete with accessories. Gjdpfxew Ryhno Ahvobw Details: Turning diameter: 300 mm Turning length: 430 mm Swing diameter over bed slide: 160 mm Turning diameter over bed slide (with T-slots): 135 mm Centre distance: 470 mm Centre height: 145 mm Bed width: 205 mm Number of spindle speeds: 18 Speed range: 30 - 3550 rpm Speed range: 15 - 3550 rpm Number of feeds: 90 Feed range: 0.02 - 2.0 mm/rev Workpiece weight in steadies (max.): 25 kg Workpiece weight without steadies (max.): 80 kg Machine weight approx.: 0.9 t Total power requirement: 3.5 kW Machine dimensions approx.: 1475 x 795 x 1300 mm Quill diameter: 40 mm Quill stroke: 85 mm Control unit: Conventional

Condition: used, total length: 2,320 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 1.600 kg - Documentation available: No - Drive system: Conventional - Power [kW]: 4.0 - Centre height [mm]: 190 - Swing over bed [mm]: 380 Gbjdpfxsw A H Tcs Ahvow - Distance between centres [mm]: 1000 - Spindle bore [mm]: 56 - Min. spindle speed [rpm]: 63 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 2320mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2004, spindle bore: 41 mm, turning diameter: 330 mm, center width: 750 mm, Siemens control capacity 750X330MM spindle bore 41MM maximum spindle speed 4000 rpm Multifix turret Gbjdpfjxu Igxsx Ahvew set of Multifix collets and jaws

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and pull spindle lathe with 2 axis digital readout Heidenhain from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: Gbjdpfxou Afqlj Ahvsw >> 2-axis digital readout from Heidenhain >> 1 new three-jaw chuck 125 mm with 2 sets of jaws >> collet chuck device new with collets new from 3 mm to 25 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Back plate To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev Gbjdpfju Aftgox Ahvjw >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: Gbjdpovtp Edofx Ahvjw A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus GS guide and feed spindle lathe in very good original condition! Technical specifications: >> Year of manufacture approx. 1992 Machine no. 4549 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps Gbjdjwkh Abepfx Ahvow >> Spindle bore 23 mm >> Short taper spindle head DIN 4 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> New collet chuck system, new collets from 3 to 25 mm >> 1 piece Three-jaw chuck with 2 sets of jaws >> Mulifix size A with 2 tool holders About the machine: Offered is a Weiler Primus GS guide and feed spindle lathe in very good original condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in excellent condition. The Weiler runs very quietly even at high speeds. The Primus was used in a training facility. This newer generation of Weiler lathes is very user-friendly and can produce surfaces that look as if they were ground. Take advantage of the opportunity to view this machine on-site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus GS lead and feed screw lathe 3 axis digital readout Easson- ES8 from training workshop Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 3768 >> Center height 120 mm >> Center width 430 mm Gbodpfjvkfhpjx Ahvow >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 3-axis digital display from Easson ES8 >> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube >> 1 three-jaw chuck with 2 sets of jaws >> 1 four-jaw chuck with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Bed stop >> Turning device To the machine : We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> Gedpfjvivmysx Ahvjbw To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: Gbsdexcuazjpfx Ahvew >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Primus VC Precision Centre Lathe 3-axis Digital Readout K&C NEW with VC Drive, Stepless Speed Adjustment, and CE Compliance, Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch Gbjdpfow Idllox Ahvow >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis Digital Readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 toolholders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: This offer is for a Weiler Primus VC lead and feed screw lathe, built in 2003 and in very good original condition. A very nice lathe with VC drive and stepless spindle speed control. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and be convinced of its condition.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral-Pitch >> Metric thread pitches from 0.18 to 28 mm Gbsdpfx Aswrmuxehvjw >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Gjdpfew Nw Dqox Ahvjbw Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.