Condition: new, The Basic 170 Super is a versatile lathe for single part production. Due to the large selection of optional accessories, these models are the best choice for repair, training and workshops of all kinds Djb Hc I Iep Ebh Njyekl

Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 - Raw diameter before thread cutting: 1 to 200 mm - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN - Start position adjustment for knurl before thread cutting: 0 to 359.999° - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK" Dksb Hcou R N Hye I Iyjl

Condition: new, Year of construction: 2024, dimension of workpiece 200 x 200 x 200 mm travel -x axis 110 mm Dkeb Hswgn D Dec I Iyel travel -y axis 110 mm

Condition: good (used), Functionality: fully functional, total height: 3,500 mm, total width: 2,800 mm, total length: 1,200 mm, pressing force: 300 t, ID105830 Hydraulic press Brand: Van De Graaf Type: HVK-300 Dob Hc I Iswhc H Aeyokl Capacity: 300 tons

Condition: used, Year of construction: 2014, pressure 220 t chamfer lenght 4050 mm distance between columns 3600 mm stroke of upper beam 265 mm throat 410 mm dayligth 530 mm ajustment speed 160 mm/sec working feed 10.0 mm/sec return speed 140 mm/sec Control DNC 880 S work height max. 900 mm table width 104 mm back stop - adjustable max. 675 mm oil volume 250 l total power requirement 22.0 kW Djbswgnx Is Hc I Iyskl weight 15600 kg range L-W-H 5250 x 1770 x 2950 mm Current new price ~ 100.000 Euro Special price upon request Equipment: - CNC electro-hydraulic press brake * Stress-relieved steel construction body = durable monoblock frame - CYBELEC CNC control model DNC 880 S * graphic display (extern) * Product representation as line, area, or volume drawing * Clear, user-friendly menus in the operator's language * Extensive tool and product library * Graphic 2D programming * Automatic bending sequence calculation and collision detection * Pivoting control panel, front right - CNC-controlled axes: Y1 + Y2 + X + R axes + CNC crowning - CNC electro-motorized backgauge (X axis) * With 2 manually adjustable stop fingers (Z axis) * Backgauge with ball screw + linear guides * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the backgauge (R axis) * Max. travel 250 mm * Travel speed 140 mm/sec. - CNC electro-motorized lower beam crowning - FIESSLER laser safety device at the front - Upper tool holder with upper wedge crowning & quick-change adapter (AMADA) * Includes split tool set - 1x universally rotatable MULTI-V die block - 2x front + sliding robust support arms * Mounted on a linear guide rail system - Side safety guard (swinging doors) - Rear safety guard (swinging door) - 1x freely movable foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 1990, table load max. 40 t t with manual operation panel ja weight of the machine ca. 22 t 1918 Year ca. 1990 +++++ Djb Hcehy T Nvj I Iyekl Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1972, turning length 2000 mm Deb Hc I Iouap Uaoyokl turning speeds 1400 U/min centre height 315 mm turning diameter 630 mm Including accessories (see pictures). The machine is in very good condition and has been well maintained. Only the rapid traverse should be checked.

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: 25001, "General specifications: - Maximum grinding length: 150 mm - Axle height on the bench: 251 mm - Center height from the floor: 1190 mm - Maximum outer diameter of the workpiece: 360 mm - Maximum grindable workpiece length: 200 mm - Maximum loadable weight (at 100 mm): 150 daN - Total installable power: 55 kW - Machine weight: 7000 kg X-axis: - Maximum travel: 330 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm Deb Hc I Isu Egagsyjkl - Transducer: Linear decoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Z-axis: - Maximum travel: 590 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Converter: Linear encoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Internal electric motor spindle: - Maximum revolutions: 36000 rpm (S6) - Grinding wheel motor power: 22 kW (S6) - Model: FISCHER MFM-1418/36/1HJDN16 - Maximum theoretical peripheral speed of the wheel: 50 m/s Workpiece headstock: - Spindle taper: Morse taper 5 / Asa 8 - Bar capacity: 38 mm - Speed range: 10 - 800 rpm - Torque: 58 Nm - Motor: 20 Nm / 3000 rpm Internal grinding wheel: - Diameter: 138 mm - Thickness: 49 mm - Maximum permissible speed: 6000 rpm Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Full supporting documentation (electronic format) including: Owner's manuals, drawings, certificate of conformity, consumables lists, back up files etc. - Nissan Asset Ref: AF201526 - Acquisition cost €345k+ - Professionally dismantled, marked, packed and stored in Liverpool, UK"

Year of construction: 2021, Condition: used, current capacity 25 kVA number of controlled axis 6 workpiece weight 10 kg weight of the machine ca. 1,55 t Year of construction 2020 demonstration machine, as new Easy ARC 01.02 FD-B6 Welbee P500L welding robot station MIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6 Dob Hc Iowgn Dwj Iyokl with welding table 2000x1200mm Hole diameter 28 mm The mobile welding cell for the craft business Setting range MIG / MAG 20 - 500 A Steplessly adjustable switching levels Duty cycle at rent 40 ° C 50% Current at 100% ED 40 ° C 410 A Wire feed speed 0 - 22 m / min

Condition: good (used), Year of construction: 1997, Functionality: fully functional, pressure: 300 bar, oil tank capacity: 220 l, ID43737 Year: 1991-1997 Press machines with capacities from 60 tons to 80 tons Brand: Hydro-Presses 2 units with 60 ton force PH600 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 60 tonnes at 300 bar 5 units with 80 ton force PH800 Dkeb Hcowhcmpo I Iysl Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 80 tonnes at 300 bar

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Mazak FH480 Machining Center (2) 1997 Mazatrol M 32 CNC Conveyor Supplied with several tools Deb Hc I Iev Subnsyokl with all documentation In good condition

Condition: used, Year of construction: 2007, oil mist extraction ja serial number 2342-11 Dkeb Hswgi Rfjc I Iyjl

Condition: used, Year of construction: 2006, pressure 175 t chamfer lenght 3550 mm distance between columns 3050 mm throat 405 mm stroke 400 mm ram stroke speed 140 mm/sec working feed 10 mm/sec return speed 180 mm/sec work height max. 900 mm oil volume 350 l Control CYBELEC ModEva 10S total power requirement 25,5 kW weight of the machine ca. 13800 kg dimensions 5980 x 3590 x 3220 mm Furnishing: - DELEM CNC control DA65 Deb Hc Iswgn Dqs Iyekl - controlled axes: Y1 + Y2 + X + R - Electric crowning device WILA, controlled via CNC - Electric back stop, travel range 600 mm - hydr. Upper tool holder WILA - hydr. WILA lower tool holder - front laser protection device FIESSLER - 5x manually adjustable stop fingers, foldable - 2x front support arms “sliding system” - side + back protection device - Hand and foot controls - Operation manual ?

Condition: good (used), Year of construction: 1996, Functionality: fully functional, Mazak FH480 Machining Center 1996 Mazatrol M Plus CNC Conveyor Supplied with several tools Dksbov Stpwj Hc I Iyol with all documentation In good condition

Condition: used, Year of construction: 1994, faceplate diameter 1400 mm 51228 table turning speeds 315 U/min turning height 1500 mm swing dia. max. 1750 mm Dkjbowgi N Uj Hc I Iyjl

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Victor Vcenter H630 Machining Center Dksb Hcov Stw Us I Iyel 1999 Fanuc 18-M CNC Tool Loader Conveyor Supplied with several tools With all documentation In good condition

Condition: used, Year of construction: 1999, cutting range for steel to . mm capacity at 100% . mm cutting medium . current intensivity 60 A Dsb Howgi Nnec I Iyekl total power requirement . kW dimensions of the machine ca. . m

Condition: good (used), Year of construction: 1992, Functionality: fully functional, Mazak QT-15N CNC Lathe Year: 1992 CN: Mazatrol T32B Djb Hov Stgisc I Iyokl with tailstock and conveyor Supplied with several tools with all documentation In good condition

Year of construction: 1988, Condition: used, weight of the machine ca. 5 t working width max. 300 mm 6 extensive accessories viele Wechselräder +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Dsb Hc Ievrk Ecj Iyekl

Condition: good (used), Year of construction: 1985, Functionality: fully functional, Mori Seiki SL-3H CNC Lathe Debov Stbyo Hc I Iyjkl

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Djb Hcehxzmce I Iyskl +++++

Condition: good (used), Year of construction: 2002, Functionality: fully functional, Mazak SQT-250 CNC Lathe (2) Year: 2002 With tailstock and conveyor Supplied with several tools With all documentation Deb Hjv Srzrec I Iyokl In good condition

Condition: used, Year of construction: 1976, working area Ø 12 - 75 mm 2 x 10 kW, 380 V ca. 3,20 x 1,52 x 2,15 m L x B x H total wight ca. 5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Dkob Hcjud Alaj I Iyol Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Mazak SQT-250 CNC Lathe Year: 1998 Debov Srmus Hc I Iyekl With tailstock and conveyor Supplied with several tools With all documentation In good condition

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Mazak SQT-250MS + GL-100C CNC Lathe 3-Axis with Motorized Tooling Year: 1998 With GL-100C Loading Robot Supplied with several tools and motorized tools with all documentation Dkjb Hcsv Srg Uo I Iyel In good condition