Condition: ready for operation (used), Year of construction: 2007, Key Technical Specifications • Type: 3-axis vertical machining center / traveling-column milling machine Fodpfx Aez Tc E Ssgxsgi • Travels (X / Y / Z): 2,200 mm / 560 mm / 720 mm (approx. 220 cm X-axis) • Table Size (L x W): 2,600 x 600 mm • Maximum Table Load: 2,200 kg • Spindle Speed: Up to 18,000 RPM (common configuration for this model variant) • Tool Taper: SK 40 • CNC Control Unit: Heidenhain iTNC 530 • Machine Weight: Approximately 12 tons

Condition: like new (used), Year of construction: 2008, EUMACH SPINNER MCV 1600 MACHINING CENTER SELCA S 4045 D CNC YEAR: 2008 WORK TABLE: 1,800 mm x 810 mm TRAVELS: X: 1,600 mm Fgjdpfsz Td Unsx Agxji Y: 800 mm Z: 700 mm SPINDLE TAPER: ISO 40 / DIN 69871 SPINDLE SPEED: 10,000 RPM RANDOM TOOL CHANGER: 30 POSITIONS EQUIPPED WITH CHIP CONVEYOR FLYING TOOL CHANGER POWER: 18.5 KW WEIGHT: 15,000 KG

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,000 h, travel distance X-axis: 1,140 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, controller manufacturer: MITSUBISHI, controller model: M720 SSS, table load: 850 kg, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Additional equipment • Air blast through spindle • Rotary table with counter-support and hydraulic lock – 360° rotation • Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes • Coolant through spindle, 20 bar + low-pressure cooling system • Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe • Chip flushing system • Chain-type chip conveyor • Telescopic covers for X, Y, Z axes • Full machine enclosure with safety door lock • Central lubrication system with oil cooler Machine Benefits Qualitative Machine Benefits • Condition: very good, low operating hours • Ready for tests Technical Machine Benefits • B-axis (tilting head): –120° to +120° • C-axis (rotary table): 360° continuous rotation • 24-position drum-type tool magazine • Table size: 1300 × 610 mm Extra Information Additional equipment Work area lighting Signal tower Air and coolant guns MPG handwheel Electrical cabinet cooling with air conditioner Fgjdpfx Agjz Ea Sxsxoi Temperature control system for spindle and ball screws Coolant oil separator Maintenance tool set

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,010 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Oi-MC, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 530 mm Travel range, Z-axis: 510 mm Table length: 1,200 mm Table width: 510 mm Orientation: Horizontal Tool interface: ISO 40 Fgodpoz Ebb Ujfx Agxei Max. spindle speed: 10,000 rpm Tool positions: 24 MACHINE DETAILS Control: CNC Control system: Fanuc Oi-MC Number of axes: 3 Power: 11 kW Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,150 x 2,300 mm Net weight: 6,000 kg Shipping packages: 3 Operating hours: 3,010 h EQUIPMENT Spindle cooling Documentation CE marking External cooling Tool magazine Chip conveyor Tools included

Condition: good (used), Year of construction: 2013, functionality: fully functional, Brother TC-32BN QT – Key Technical Specifications Manufacturer: Brother, Japan Model: TC-32BN QT Year of Manufacture: 2013 Control System: Brother CNC-B00 X-axis travel: 550 mm Y-axis travel: 400 mm Z-axis travel: 415 mm Fsdpfs Abv Nlox Agxsgi Maximum spindle speed: 16,000 rpm Tool clamping taper: BT30 Tool magazine: 26 positions Spindle motor power: 7.3 kW Through-spindle coolant: 70 bar NC rotary table: Kitagawa CKR160RY Chip conveyor: two-belt type, with filtration and a 540 l tank Machine weight: 4,600 kg

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, Mikron VCE1000 pro Machining Center Year of manufacture: 2016 Control system: Heidenhain TNC 620 Fgodj Afn Egepfx Agxsi X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 600 mm Tool magazine: 40 positions Maximum spindle speed: 16,000 rpm Spindle taper: HSK63 Table dimensions (mm): 1000 x 560 Machine equipped with Heidenhain linear scales on the XYZ axes Tool probe: Renishaw OMP40-2 Through-spindle coolant (IKZ) High-pressure pump with paper filter Chip conveyor Spindle operating hours: 7254 hours

Condition: good (used), Year of construction: 1998, Manufacturer: SAEILO Model: CONTUR TV 1000 Year of manufacture: 1996 Control system: Heidenhain Number of axes: 3 Travel distances: X-axis: 1,016 mm Y-axis: 610 mm Z-axis: 508 mm Work table: Table size: 1,080 × 580 mm Maximum table load: 600 kg Main spindle: Spindle speed: 5–8,000 rpm Spindle power: 11 / 16.5 kW Tool holder: SK40 Fjdsz R I Stspfx Agxogi Spindle gearbox: 2-stage Tool changer: Automatic tool changer Tool magazine: 40 positions Tool holder: SK40 Feed rate: Working feed rate: 0.25–5,080 mm/min Rapid traverse rate X/Y: 20,000 mm/min Machine weight: Approx. 6,000 kg Equipment and accessories The machine features extensive equipment. - Heidenhain CNC control system - Automatic 40-position tool changer - SK40 tool holder - Electronic handwheel - 3D probe - 3-jaw chuck - Machine vice

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 498-56, travel distance X-axis: 800 mm, travel distance Z-axis: 550 mm, controller model: SIEMENS SINUMERIK 840 D, table width: 350 mm, table length: 850 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between November 16, 2026, and November 26, 2026! The machine’s spindle was recently replaced! TECHNICAL DETAILS Travel distance X-axis: 800 mm Travel distance Y-axis: 500 + 50 mm Travel distance Z-axis: 550 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool positions: 40 Table length: 850 mm Table width: 350 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 5,500 x 3,700 x 2,900 mm Weight: 10,000 kg EQUIPMENT Chip conveyor KNOLL Paper band filter system KNOLL Zero-point clamping system SCHUNK SDE 138 Tool holders and tools in the tool changer Fgsdpfx Aez Il Nzogxei Measuring probe as shown in the pictures Note: A truck with a width of 3,000 mm is required for transport. External reference: Wittner - Lot 11

Condition: used, Year of construction: 2007, Milling machine Röders RXP 800 DS, year of manufacture 2007 Fgjdpjyiln Uofx Agxji

Condition: excellent (used), Working travels 1600 x 900 x 800 mm Table size 1700 x 850 mm Spindle taper SK40 Fgedpfx Aon Hqa Tegxei Spindle speeds -10'000 rpm Tool changer 30 Pos. Control: HEIDENHAIN iTNC530 3D Measuring taper Misc.accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2003, Technical details: x-travel: 800 mm y-travel: 400 mm z-travel: 350 mm total power requirement: 44 kW Fodpfx Aouqq Uqegxjgi weight of the machine ca.: 8,8 t dimensions of the machine ca.: 6,1 x 4,1 x 3,3 m tool taper: HSK63 number of spindle speeds: 36-12.000 Number of tools: 2 x 21 St. rotary table diameter: 1340 mm

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Fsdpju Idbyjfx Agxogi Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device -machine ilumination *

Condition: used, Year of construction: 2001, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. feed speeds infinitely variable: x/y/z= 20 - 10.000 mm/min Fgodpfx Aeu Idgcogxsi tool changer: 2 Magazine tool changer with: 12 place pro Magazin spindle hours: 21 212 h operating hours - idle run: 49 845 h total power requirement: 20,6 kW Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) - control unit *

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer Fodpfx Agsu Idmvsxogi IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: good (used), Year of construction: 2010, Machining Centre Sugino Xion-II-5AX-CE Manufacturer: Sugino Machine Limited Japan Model: Xion II 5AX CE Year of manufacture: 2010 Number of axes: 5 Travel distance X axis: 300 mm Travel distance Y axis: 300 mm Travel distance Z axis: 200 mm A axis swiveling range: -90° to +90° C axis rotation: 360° Maximum tool diameter: 40 mm Maximum tool weight: 15 kg Spindle speed: 40,000 rpm Fgsdpfx Agex Hqwgsxji Tool holder: HSK-E32 Positioning accuracy X, Y, and Z axes: 0.002 mm Repeatability X, Y, and Z axes: ±0.001 mm Machine weight: 2,800 kg No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Year of construction: 2006, functionality: fully functional, MATSUURA MAM72-35V 5 AXIS 32 PALLET MACHINING CENTER G-TECH 16i CONTROL 2006 MACHINE Supplied with 20 BT 40 tools and 5 pallets 15 k Spindle . £65k plus vat. Fedpex U D Twefx Agxjgi

Condition: excellent (used), Year of construction: 2012, CNC machining center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Year of manufacture: 2012 Internal machine no.: 5 Travel paths: X-axis: 2,340 mm Y-axis: 800 mm Z-axis: 600 mm Clamping surface: 2,900 x 750 mm Fgodpfxjylid Uo Agxei Pendulum machining: 2 x 945 x 800 mm Table load: approx. 2,800 kg Spindle taper: SK 40 Tool magazine: 30 stations Spindle speed: 30 - 8,000 rpm Equipment: Chip conveyor Paper band filter unit Handwheel HR410 Machine enclosure 2x LTA extraction systems Partition wall Pickup magazine for angle heads

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 016-018828-450, SPECIFICATION Table 914mm x 500mm X axis traverse 830mm Y axis traverse 530mm Z axis traverse 580mm Spindle nose to table 115-695mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 22.4kW Rapid feed rate 30m/min Toolchanger capacity 30 tools Approximate weight 5800Kg Fgedpfx Aexzqq Tegxei   MACHINE EQUIPPED WITH: - Siemens 828D CNC Control Renishaw probe 15 0ff BT40 toolholders Coolant system Lighting Guarding

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Haas TM1 4 K SPINDLE TRAVELS X 762 MM Y 305 MM Z 406MM This machine has the option to run on 240v single phase Fjdpfx Aeyfn Ilsgxjgi 2003 machine in good condition Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM1 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required. The machine is 2.7m high with the head up and 2.2 with it down.

Condition: ready for operation (used), Year of construction: 2009, Used CNC vertical machining center Fsdpoycplmofx Agxegi

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,361 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D ShopMill, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,000 mm, total width: 5,000 mm, table width: 900 mm, table length: 560 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,361 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Beschrijving Deze Japanse DMG MORI ecoMill 600V hebben wij werkend uit productie overgenomen en is in frisse staat. De CMX 600V (ecoMill 600V) is voorzien van een C-frame constructie (klassieke opbouw) en beweegbare tafel (x-as) wat bedoeld is voor algemeen/all-round freeswerk. Fgedpfoy Dg Euex Agxji Aanvullende opties & accessoires: Siemens 840D SlimLine incl. 3D-simulatie. PROGRESSLine (weergave van de resterende productietijd en het aantal stuks van een volledig bewerkingsproces). Spanentransporteur Spoelpistool Voorbereiding voor interne cooling. Originele documentatie Gewicht & afmetingen: 400x500x300 cm +/- 5.000 kg

Condition: used, Year of construction: 2008, x-travel 1350 mm y-travel 900 mm z-travel 750 mm spindle turning speed range 15000 U/min Control iTNC 530 weight of the machine ca. 11,4 t 3-axis vertical machining centre with BÜRENER KFE 63/40-900 Z60 chip conveyor Condition: Well suited for roughing operations Working ranges Fgsdjyyqtuspfx Agxji X-axis travel: 1350 mm Y-axis travel: 900 mm Z-travel: 750 mm Spindle nose to table surface: 135–885 mm Work table Clamping surface: 1425 x 860 mm Max. workpiece weight: 1800 kg Number of T-slots: 10 T-slot width: 1x18H7.9x18H12 Work spindle Speed range: 0 - 15,000 rpm Power: 38 kW Tool magazine: 46 pcs. Tool holder: HSK-A63 Cooling: Water with corrosion protection Footprint L x W x H: 4130 x 3680 x 3150 mm

Condition: used, Year of construction: 2014, travel distance X-axis: 1,500 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fagor 8055 M, table height: 610 mm, table length: 1,600 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, CNC machining center Brand: Travis Fgsdpey Aww Sjfx Agxsi Model: M-1500 SL Year: 2014 CNC control: Fagor 8055 M Travel (X, Y, Z): 1500x610x610 mm Worktable: 1600x610 mm Spindle speed: 8,000 rpm Taper: ISO 40 Guideways: Linear roller guides Tool changer: 24 positions Machine from IAIN Mecanizados workshop in Hospitalet de Llobregat. Schedule a visit to view the machine on site.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Fagor 8040-M, table width: 510 mm, table length: 900 mm, overall weight: 4,800 kg, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 18, CNC machining center Brand: Kaukan (L&W Machine Tools) Model: Cinch Mill30SB Year: 2006 Weight: 4,800 kg Fgjdpfx Agsy A Et Ioxsi RPM: 6,000 CNC: Fagor 8040-M Work table: 900x510 mm Travel (X, Y, Z): 760x510x510 mm Taper: ISO 40 Guides: High-precision linear guides Tool changer: 18 tools Condition: Very good Machine from IAIN Mecanizados workshop in Hospitalet de Llobregat. Viewings can be arranged to inspect the machine on-site.

Condition: excellent (used), FANUC 21-M Control With NC dividing head Fedpfx Agjy Hqyhoxjgi Working travels 1020 x 510 x 575 mm Table size 1200 x 550 mm Spindle taper SK40 Spindle speeds 60-8'000 rpm Tool changer 24 Pos. Coolant through spindle Misc. accessories MARCELS MASCHINEN CH