Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Year of manufacture: 2013 Axes: 5 Travel X axis: 300 mm Travel Y axis: 300 + 100 mm Travel Z axis: 330 mm Swivel range A axis: -90° – +90° Rotary axis C: 360° Gedpfx Aaox Hqwaoyskf Table load capacity: 200 kg Maximum tool diameter: 40 mm Maximum tool weight: 3 kg Maximum total tool mass: 33 kg Number of tools: 21 Spindle speed: 24,000 rpm No liability is assumed for the accuracy, completeness or timeliness of the information provided.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Performance Machining Center - 3 Axes Manufacturer: SPINNER Model: VC1150-10 (ST) Year of manufacture: 2017 Control unit: Heidenhain TNC 620 TECHNICAL DATA: Tool holder: SK40 Travel paths: X = 1,150 mm, Y = 620 mm, Z = 600 mm Spindle: 10,000 rpm, Max = 200 Nm, Pmax = 29 kW Gkjdpfxjx Dkizs Aayef SPECIAL EQUIPMENT: - Chip conveyor, scraper belt, right-hand side - Tool changer with 60+1 positions - Direct measuring systems in X/Y/Z - High-pressure through-spindle coolant, 22 bar - Coolant/air blast switching for internal spindle flushing, via M-function - TNC software option "Probe System Functions" - Workpiece touch probe system for milling machines, Blum TC52 system The machine can be inspected under production conditions. Sale without guarantee or warranty. Subject to prior sale.

Condition: used, Year of construction: 2001, x-travel 305 mm y-travel 610 mm z-travel 100 mm Control Fanuc 21-M spindle tunring speed 12.000 U/min Gkodpfx Aaewth Sneyjf tool taper SK 40 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Gsdpfxox Hn Dqo Aayskf Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: SIEMENS 840 D Solution Line, number of spindles: 2, number of slots in tool magazine: 32, Equipment: chip conveyor, rotational speed infinitely variable, - Twin-spindle machining centre - 5 axes - Automatic tool changer with 2x 16 tool positions Gjdpex E Sr Nefx Aayekf Further details available on request.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 15,000 rpm, - ULTIMAX 4 control - toolchanger for 24 tools - chip tank - electronical hand wheel Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-15000 UpM /rpm Gjdpfx Aox Hfnysayekf Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30/30/20 m/min Gewicht der Maschine ca. / weight 4300 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2012, Hasegawa PM150 Machining Center Manufacturer: Hasegawa Model: PM 150 Year of manufacture: 2012 Number of axes: 4 Travel X axis: 150 mm Travel Y axis: 225 mm Travel Z axis: 200 mm Swivel axis: YES Rapid traverse X, Y, Z: 30 m/min Table load capacity: 80 kg Table working surface: 300 × 260 mm T-slot table: 12H7 × 5 Spindle taper: HSK E32 Spindle speed: 100 to 30000 rpm Tool magazine: 10 tools Max. tool size: Ø50 mm Memory capacity: 5120 m 2048 kB Gksdpfx Aaox Hqv Nsysf Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), Year of construction: 2007, Vice NOT included Comes with a small selection of tooling. Gedpfx Aexwlx Doayekf X Axis Travel - 660mm, Y Axis Travel - 356mm, Z Axis Travel - 457mm, Max Table Load - 340kg, Spindle Motor - 10HP, Spindle Speed - 8000RPM, Spindle Taper - 40CT, Tool Changer - 20ATC

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, controller manufacturer: FANUC, controller model: SERIES 16i-M, workpiece weight (max.): 250 kg, total height: 2,300 mm, total length: 2,100 mm, total width: 2,200 mm, table width: 400 mm, table length: 650 mm, overall weight: 2,200 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 14, mount diameter: 30 mm, tool length: 200 mm, tool diameter: 80 mm, STAMA MC 014 CNC Vertical Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 17 A - Overhang: 380 mm - Table to spindle nose: 150 - 480 mm - Table including 3 T-slots - Spindle bearing diameter: 50 mm - Note: without clamping devices and tool holders shown in the photos Note: the item must be collected on a binding date between 04. and 12.03.2026, to be agreed. Gedpfxex E T Ncs Aayokf FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Gedpex Hn Atjfx Aayekf Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Machine can be inspected under power by arrangement.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, KIRA (Japan) KN 40 VS 2-Compartment Pallet Processing Center / Vertical Stock No: 07-07-183 -Year of construction 1992 (machine from first ownership, very well maintained) -2-compartment pallet change / round pallet change -Fanuc OM - Mate -Pallet size 500x300mm -Travel X440 Y280 Z315mm -Tool change 12-fold -Spindle speeds 200 - 4500rpm -Drive power 7.5 KW -Chip conveyor / flushing device / work area lighting Dimensions: Gkodpjv Sy Eljfx Aayof LxWxH 2.4x1.7x2.3 meters / Weight 3500Kg

Condition: excellent (used), Year of construction: 2007, Mazak 3-axis vertical machining center in very good condition. Including: 15 bar Cooling through spindle Chip conveyor Renishaw OMP60 measuring probe Only 6911 spindle hours and well maintained. Machine can be inspected under power upon appointment. Availability: February 2026 More info and videos available on request. Control Mazatrol Fusion 640M Max spindle speed 12000 rpm Gkodpfx Ajx Eb Evsayjf X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 660 mm Tool holder SK40 Capacity tool magazine 30 positions Table length 2000 mm Table width 760 mm Table load 1400 kg Machine weight 11500 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 7,647 h, General Data Machine weight 18500 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 5 Spindle Speed 12000 RPM Spindle motor power 26.5 kW Tool taper SK 40 Movement X-Axis Movement 2300 mm Z-Axis Movement 850 mm Y-Axis Movement 800 mm Tools Max weight 10 kg This 5-axis HEDELIUS T8 - 2300 was manufactured in 2006, featuring a robust vertical machining center design. It boasts a large travel range of 2300/800/850 mm and a high spindle speed up to 12,000 rpm. The machine includes a B-axis NC swivel head, a 40-position tool magazine, and supports a maximum workpiece weight of 2500 kg. Consider the opportunity to buy this HEDELIUS T8 - 2300 vertical machining center. Contact us for more information. Application Types Milling Gkedpfx Ajx E Ebwsayef

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Gsdpfx Ajw T Tlreayekf Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, controller manufacturer: FANUC, controller model: SERIES 16i-M, workpiece weight (max.): 250 kg, total height: 2,300 mm, total length: 2,100 mm, total width: 2,200 mm, table width: 400 mm, table length: 650 mm, overall weight: 2,200 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 14, mount diameter: 30 mm, tool length: 200 mm, tool diameter: 80 mm, STAMA MC 014 CNC Vertical Machining Center - Operating voltage: 400 V Gkodpfx Ajx E Tz Eoayef - Frequency: 50 Hz - Rated current: 17 A - Overhang: 380 mm - Table to spindle nose: 150 - 480 mm - Table with 3 T-slots - Spindle bearing diameter: 50 mm - Note: Without the clamping devices and tool holders shown in the photos Attention: The item must be collected firmly between 04 and 12.03.2026 on a date to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Gkodpfxjx Hnx Ue Aayjf Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 533143283, travel distance X-axis: 2,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller manufacturer: MAZATROL, workpiece height (max.): 750 mm, workpiece weight (max.): 3,000 kg, table width: 800 mm, table length: 2,240 mm, overall weight: 14,000 kg, Mazak MTV-815/80 • Table size: 2,240 mm × 810 mm • Maximum table/workpiece load: 3,000 kg evenly distributed • Maximum spindle speed: 40 - 6,000 rpm • Spindle taper: SK 50 Gksdpsx E Twaefx Aayof • Spindle power/torque (standard): e.g. 18.5 kW and 759 N·m at 40% duty cycle / 30 min rating; for high-power version: 26 kW and 1,067 N·m. All information provided without guarantee

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand HEIDENHAIN Model iTNC 530 General Data Machine weight 3600 kg Main Drive Spindle speed range 20 - 10000 RPM Spindle motor power 9 / 13 kW Tool taper SK 40 Number of axis 5 Movement X-Axis Movement 500 mm Y-Axis Movement 450 mm Z-Axis Movement 400 mm Additional Equipment Tool Positions: 16 / Max. Tool Weight: 6 kg / Max. Tool Length: 300 mm Godpfxox E D U Ao Aayjkf Max. Tool Diameter: Without adjacent tools: 130 mm / With adjacent tools: 80 mm Total Power Requirement: 17 kVA No chip conveyor included / No automatic measuring probe included / No tools included This 5-axis DMG DECKEL MAHO DMU 50 vertical machining centre was manufactured in 2005. It features a Heidenhain iTNC 530 control, a main spindle speed range of 20 - 10,000 RPM, and a rotary table with a clamping surface of 630 x 500 mm. The machine has undergone significant overhauls, including a complete X-Axis bearing replacement and new coolant pump installation. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 163341, Country of manufacture: UK Voltage: 400V 3-phase AC 50/60Hz, max 58A Dimensions: 200x260x250 cm Net machine weight: 5010 kg TECHNICAL SPECIFICATIONS Capacities Table dimensions: length 900 mm / depth 410 mm X-axis: 560 mm Y-axis: 410 mm Z-axis: 510 mm Distance from spindle nose to table surface: min. 150 mm, max. 660 mm Distance from spindle center to column: 540 mm Maximum table load: 500 kg Spindle Speed: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power: 7.5 kW Feed Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900x410 mm T-slot size (ISO R299): 18 mm / Number: 3 / Spacing: 125 mm Permissible load: 500 kg Distance from floor to table surface: 780 mm ATC Tool Magazine Number of tools: 30 pcs Tool selection: free choice of station number; automatic bi-directional search Tool holder: MAS BT-40 Gsdpfjw T Tp Rsx Aayokf Max. tool diameter in magazine: Ø 80 mm (without adjacent tool: Ø 125 mm) Max. tool weight: 8 kg Max. magazine load: 120 kg Max. tool length: 350 mm Tool change time: 2.9 s (chip-to-chip) Lubricant tank: 1.8 L Feed lubricant tank: 260 cm³ Spindle coolant tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant tank: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min Subject to errors or omissions, all technical specifications are provided without guarantee.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: KMM526 1506, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, controller manufacturer: FANUC, controller model: SERIES 18i-MB, total height: 3,300 mm, total length: 2,700 mm, total width: 2,700 mm, table width: 470 mm, table length: 1,500 mm, spindle speed (min.): 36 rpm, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, tool length: 250 mm, tool diameter: 125 mm, input voltage: 400 V, Equipment: chip conveyor, STAMA MC 526 CNC Vertical Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 45 A - Table with three T-slots - Incl. 4th axis - Incl. 42-position tool changer - Overhang: 350 mm Gkedpfx Aox E Tt Ijayof - Working spindle bearing diameter: 65 mm - Incl. chip conveyor and coolant system - Note: without the clamping devices shown in the photos Notice: The item must be collected bindingly between 04 and 12 March 2026 on a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2004, Ref. -No.: 10387 Manufacturer: MATEC Type: 30 L / 6000 Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 6000 mm Y-Travel: 800 mm Z-Travel: 600 mm Spindle Taper: SK 50 Gkedpfjx Hnwqex Aayof Table Load: 3000 kg Max. Workpiece Weight: 800 kg Spindle Speed: 20 - 9000 RPM Max. Torque: 165 Nm Main Drive: 60 kW Weight Of The Machine Ca.: 24 t

Condition: ready for operation (used), Year of construction: 2006, operating hours: 976 h, General Data Machine weight 7000 kg Main Drive Number of axis 4 Spindle motor power 28 kW This 4-axis CHIRON FZ 18 L was manufactured in 2006, featuring a robust 2000x520x600mm working area and a powerful 28 kVA system. With only 976 hours since control system replacement, it's a reliable choice for precision machining. Consider the opportunity to buy this CHIRON FZ 18 L vertical machining centre. Contact us for more information about this machine. Application Types Milling Gjdpfx Aaox E Eatjyjkf

Condition: excellent (used), Year of construction: 2006, operating hours: 14,300 h, functionality: fully functional, machine/vehicle number: 414-46, Year 2006 with Fanuc Series 18i-MB5 Country of manufacture: CE - Germany Net machine weight: 3,400 kg Gedpfx Aaexqmwboyekf Dimensions: 185x259x250 cm TECHNICAL SPECIFICATIONS Travel X / Y / Z: 450 / 270 / 310 mm Acceleration X / Y / Z: 0.7 / 0.7 / 1.0 g Rapid traverse X / Y / Z: 40 / 40 / 60 m/min Spindle speed max.: 15,000 rpm Tool interface: HSK A 40 Milling capacity in St 60: max 60 cm3/min Drilling capacity in St 60: max Ø 16 mm Threading: up to M12 Tool magazine / positions: 24 – special version with 40 on this machine Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.2 sec 5-axis version NC rotary tilting table: +/- 100° Rotary plate diameter: 100 mm Grid drill pattern: M6 x 50 mm 4th axis speed: 40 rpm 5th axis speed: 60 rpm Direct measuring system for 4th and 5th axes: +/-20’’ / +/-20’’ Distance spindle nose – table surface: 170 – 450 mm Maximum workpiece weight: 6 kg Technical information is provided without engagement and subject to errors or omissions.

Condition: excellent (used), Year of construction: 2005, operating hours: 9,100 h, functionality: fully functional, machine/vehicle number: 414-38, TECHNICAL DATA Godjkx Ek Tjpfx Aayskf Travels  ; X / Y / Z 450 / 270 / 310 mm. Acceleration ; X / Y / Z 0,7 / 0,7 / 1,0 g Fast speeds ; X / Y / Z 40 / 40 / 60 m/min Spindle speeds max. 15’000 min-1 Tool connection HSK A 40 Milling cap. in St 60 max 60 cm3/min Drilling cap. In St 60 max dia. 16 mm Threading up to M12 Magazine / tool posts 24 – special on this one 40 Tool changing time abt. 0,8 sec. Time clamp-to-clamp abt. 2,2 sec. 5 axes execution NC Table tilting rotating +/- 100° Circular plates 100 mm « Rasterbohrbild » M6 x 50 mm Rotations 4th. axis 40 min-1 Rotations 5th. axis 60 min-1 Direct measuring system for 4th. And 5th. axis +/-20’’ / +/-20’’ Distance spindle nose – table surface 170 – 450 mm Max transportable weight 6 kg errors and omissions excepted-data given without obligation

Condition: excellent (used), Year of construction: 2010, operating hours: 28,600 h, functionality: fully functional, Machine partially overhauled by Willemin with new geometry. Ready for production. Country of origin: CH (Switzerland) Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X Axis: 450 mm Y Axis: 200 mm Z Axis: 425 mm B Axis: -45° to +100° U Axis: 300 mm Gedpfxjw T Tk Is Aayokf Tool magazine: 48 stations PickUp Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motorized spindle: HSK40E, MAX 30,000 rpm Subject to error or omission, technical data provided without obligation.