Condition: ready for operation (used), Year of construction: 2001, General Data Measurements width 2300 Measurements depth 4500 Injection Unit Screw diameter 30 mm Stroke volume 77 ccm Injection pressure 2210 bar Clamping Unit Clamping force 50 kn Opening stroke 354 mm Celisvtt Ehomwq Njgt Mould height max 223 mm Ejector stroke 125 mm This Arburg Allrounder 320 U 500-150 was manufactured in 2001. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this Arburg Allrounder 320 U 500-150 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, Clamping force: 80 t Cgolsvclwneimwq Njt Screw diameter: 28 mm Injection volume: 86 cm3 Tie bar distance: 360x360mm Platen size: 570x570 mm Mould min-max: 140-350mm Working hours: 43 000 h

Condition: good (used), Plastic injection molding machine : Brand: BMB Type: KW650/3500 650 tons Year: 1999 Weight: 32500kg Power : 128 kW Distance between H-V columns: 860x760mm Cgjljik H Enjimwq Not Min-max mold thickness: 250-900mm Movable platen stroke: 1000mm Recent parts installed on the press: 04/2020: hydraulic safety valve on mold-holding platen: €1414 07/2021 : Hydraulic pump + coupling : 4666.74€ HT 07/2022 : More than 5000€ spent on electronic cards Optional robot: €7,000 Brand : Sepro Type : SR 4030 S3 Year : 01-08-2006

Year of construction: 1992, Condition: ready for operation (used), An injection molding machine with two units Klöckner Ferromatik Desma GmbH, Windsor plant Maintal is available. Stroke volume: 2x30150cm³, clamping force: 40000kN, injection pressure: 1800bar, cooling water requirement: 2x18.1m³/h, total power requirement: 2x700kW. Weight clamping unit: 2x175t, weight injection unit: 2x50t, total system weight: 450t. On-site inspection is possible. Cgjlimwqjv T Aqao Nst

Condition: refurbished (used), Year of construction: 2009, operating hours: 1,000 h, Functionality: fully functional, machine/vehicle number: 121069, input voltage: 400 V, overall weight: 550 kg, B SYSTEM 60 Machine Features: Cjlimwev S Hntsq Njgt - Total flow rate (min./max. ratio): 12.4 – 68.1 kilos/minute (*) - Isocyanate flow rate (min./max.): 110 to 605 g/s (*) - Polyol flow rate (min./max.): 97 to 530 g/s (*) - Heat exchanger: 0.7 m² - Total power input: 11.5 kW - Air consumption: 130 nl/pour Storage unit: - Two insulated single-jacket steel tanks, 90 liters capacity - Sight glass - Two low-pressure switches - Manual drain valve - Polyol tank agitator - Automatic tank filling (pumps not included) Component temperature control: - Heating element - PT 100 probe detecting the temperature of the Materials - Connections to the cooling water system (not supplied) Mixing head: - Mechanical mixer powered by a three-phase asynchronous motor. - Pneumatic opening and closing cylinder - Conical injectors for component pressure adjustment - Component recycling through the mixing head - Push-button box with emergency stop button, program selector, and pouring control button - Standard cleaning system - Manual safety rinse - Final blast Machine completely overhauled in 2022 by Cannon: invoices available

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest. Cgelimwel Tnz Esq Net

Condition: ready for operation (used), Year of construction: 2017, operating hours: 212 h, General Data Machine weight 21500 kg Injection Unit Screw diameter 70 mm Shot weight 1172 g Injection pressure 1856 bar Clamping Unit Clamping force 350 T Size of mold platens 249 – 800 mm This Milacron Elektron Evo 350 was manufactured in 2017. A reliable electrical injection moulding machine, it offers efficient performance for your production needs. Consider the opportunity to buy this Milacron Elektron Evo 350 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Cgjlimwsv T D Ndjq Nst

Condition: excellent (used), Year of construction: 2007, 570C 2000 - 800 Clamping force: 200 t Screw diameter: 50 mm Drive: Hydraulic (2007) Arburg ARBURG 570C 2000-800 Golden edition Cgelimwqev Avc Ue Njt Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 795 x 795 Clearance between columns (hxv) [mm] 570 x 570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Shot weight [g] 356 Injection pressure [bar] 2000 Electro-hydraulic equipment Power rating of the pump motor [kW] 30 Power rating of barrel heating [kW] 14,9 Dimensions and weight (approximately) Net weight with control cabinet [t] 7,9 Dimensions (L x W x H) [m] 5.53x1.79x2.20 Hydraulic system with 2 control pumps Connection for air blow unit 1 Core pull movable platen 4 free cooling circuids manually adjustable Selogica touchscreen.

Condition: refurbished (used), Krauss Maffei injection molding machine 25 tons Year: 2000 IPC not working (see map) Cgelimwqsrdg Tpj Nst

Year of construction: 1996, Condition: ready for operation (used), Three Ferromatik Milacron injection molding machines are available. Output: 1x15kW/2x37kW, power consumption: approx. 136A, machine weight: approx. 38000kg. On-site inspection is possible. Cjlimwqev T Ap No Negt

Condition: excellent (used), Here we offer a SmartPower 210/1330 thermoset machine. Wittmann Battenfeld injection molding machine with control UNILOG B8 Machine was serviced / checked by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021. checked and updated to the latest possible status Within the scope of the complete inspection, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already existing pressure switches, the plant offers the possibility to the possibility to install additional cavity pressure switches (2 pieces Kistler module for cavity pressure changeover, range 1: 20,000 pC, range 2: 10,000 pC). The parts for the cavity pressure switch upgrade are included in the scope of delivery. Injection moulding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: 137949-100 Machine weight, gross/net Main machine dimensions Noise level (DIN EN ISO 3744-46) 65 dB(A) Ambient temperature +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Operating hours of 1437 hrs. Hydraulic system: Hydraulic oil, tank capacity Oil temperature min / max (HLP 32) min 30°C (86°F) / max 40°C (104°F) Oil temperature min / max (HLP 46) min 40°C (104°F) / max 50°C (122°F) Switch-on temperature for oil cooling (HLP 32) 35°C (95°F) Switch-on temperature for oil cooling (HLP 46) 45°C (113°F) Electrical system: Drive power, Hydra. Pump 37kW Motor voltage Frequency Screw barrel temperature 350°C (662°F) max. Water system: Oil cooler: Cooling water connection [...] Cgjliofphtvsmwq Not

Year of construction: 2004, Condition: excellent (used), Capacity - 400 performs/min. Year - 2004/2008 Factory Consists : 1. Injection Moulding machine -Manufacturer - KRAUSS MAFFEI - Year - 2004 - Tip - 175-3500 CV - Power - 110 Kw - Clamping force - 1750 KN 2. Robot with Catcher for 48 performs - Year - 2004 - Tip - CB-PET 40 Fach 3. Preform Cooling Unit - Manufacturer - MHC Luksemburg - Year - 2004 - Tip - PL3 4. Injection Moulding Tool - Manufacturer - MHT Luksemburg - Year - 2004 - Preform Weight - 40,56 gr - Ejection Stroke - 114 mm - Weight of tool - 1150 Kg 5. Granulate Dryer - Manufacturer - PIOVAN - Italy - Tip - DP 625 Colimsgbpnmowq Negt - Year - 2004 - Power - 110 Kw 6. Granulate Silo - Manufacturer - PIOVAN - Year - 2004 - Tip - 4000 7. Cooling sistem - Manufacturer - PIOVAN -YEAR - 2004 - Tip - RPA 1200 - Power - 10,5 Kw 8. Crane - Year - 2008 - Tip - KVATP 2515E3 - Capacity - 5 tons - Dimensions - 7,5 x 2,0 mC -

Year of construction: 2019, Condition: ready for operation (used), General Data Machine weight 7100 kg Control Unit Brand ENGEL Additional Equipment Clamping unit with standard Euromap platens and safety components Coliov T D S Eemwq Nogt Hydraulic system with energy efficiency and low noise Microcomputer CC300 package with 215-inch full-HD color touch-screen Mold cooling with water terminal and flow control Machine mounts in standard execution This Engel VICTORY 500 /120 SPEX was manufactured in 2019. It's a hydraulic injection moulding machine, ideal for precision plastic processing. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2003, Functionality: fully functional, screw diameter: 52 mm, type of input current: AC, input frequency: 50 Hz, Equipment: documentation/manual, NEGRI BOSSI 2700H-1450 injection molding machine from 2003 Cjlimwev S Afhjq Nogt - Core control - Air blower - Robot interface

Condition: good (used), Year of construction: 2006, clamping force: 800 kN, Total connected load 21.7 kW Cgslimwevu Dncoq Not Pump motor 18.50 KW Weight 7,400 KG

Year of construction: 2013, Condition: ready for operation (used), An Arburg injection molding machine including a handling interface is available. Clamping force: 800kN, min. mold installation height: 250mm, max. mold installation height: 550mm, distance between tie bars: 470mm/470mm, clamping platen diameter: 125mm, ejector stroke: 125mm, injection weight: 132g, screw diameter: 35mm, injection pressure: 2000bar, core pulls: 1, total power requirement: 45.5kW, weight: approx. 4600kg. Documentation available. On-site inspection is possible. Celsv Tny Toimwq Negt

Condition: excellent (used), Year of construction: 2008, operating hours: 24,896 h, Functionality: fully functional, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,650 bar, ejector force: 61,000 N, ejector stroke: 150 mm, plate length: 750 mm, plate width: 750 mm, total length: 5,800 mm, total width: 1,700 mm, total height: 2,300 mm, overall weight: 9,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, injection moulding machine ENGEL VICTORY 1050-130 Tech warehouse no.: 503505 manufacturer: ENGEL type: VICTORY 1050-130 Tech controller: CC200 year of construction: 2008 operation hours: 24896 h technical data clamping unit clamping force: 1300 kN size of mould plates h x v: 750 x 750 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 61 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm weight of mould: 540 kg technical data injection unit screw diameter: 55 mm swept volume: 510 ccm injection pressure: 1650 bar screw length: 20 l/d screw stroke: 215 mm screw speed: 230 min injection rate into the open: 230 g/s PS number of heating zones: 5 nozzle stroke: 350 mm measures & weight measures of machine l x w x h: 5.8m x 1.7m x 2.3m total weight: 9500KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x Cjlisugvxremwq Negt machine incl. water flow regulator machine without material hopper machine without safety fencing Anti vibration mounts interface EUROMAP 67 interface for ejector plates safety Schuko-socket 10A mould heating 8x

Condition: excellent (used), Year of construction: 2005, operating hours: 82,985 h, clamping force: 250 kN, screw diameter: 18 mm, injection pressure: 2,500 bar, injection weight: 20 g, Arburg 270U-250-70 (221) Description General information Product Code: (221) Availability: In Stock Year of production: 2005 Brand: Arburg Technical data Shot Weight: 20 g Clamping Force: 250 kN Condition: Used Screw dia: 18 mm Injection pressure: 2500 bar Tie bar distance: 270 x 270 mm Platen size: 380 x 380 mm Celimwqovu Tlke Negt Mould height min.: 200 mm Type of controls: Selogica Language: German Power:10,7 kW Workinghours: 82.985 h Weight: 2100 kg Dimensions: 3m x 1,1 m Hopper: No Core pull: Yes Euromap: Yes

Condition: good (used), Year of construction: 2009, CC200 control Cgelimwov D D N Eoq Njt Clamping force: 180 t Between bars: 520x520 Min/Max mold height: 250-600mm Screw diameter: 45mm Maximum injection: 210g

Year of construction: 2016, Condition: ready for operation (used), An Arburg injection molding machine including handling is available. Clamping force: 4000kN, opening stroke: 700mm, min. mold installation height: 350mm, distance between tie bars: 820mm/820mm, clamping platen diameter: 160mm, ejector stroke: 250mm, injection weight: 1078g, screw diameter: 70mm, injection pressure: 2000bar, core pulls: 2, total power requirement: 124kW. Documentation available. On-site inspection is possible. Cgelimwqsv Tny Hj Njt

Condition: like new (used), Year of construction: 2008, Krauss Maffei KM 420-2000 CX Excellent condition LIKE NEW! Only 6000 hour in automatic cycle Clamping/Injection Matrix • Clamping force: 4200 kN • Mounting plate dimensions (h × v): 1270 × 1230 mm • Clearance between columns (h × v): 800 × 800 mm • Min./max. mold height: 580 - 1020 mm • Maximum opening width: 1600 mm Injection Unit • Screw diameter: 75 mm Cgolimev Ax Hvjwq Net • Injection volume: 1237 cm³ • Shot weight: 1126 g • Injection pressure: 1635 bar Electro-Hydraulic Equipment • Power rating of the pump motor: 75 kW • Power rating of barrel heating: 29 kW Dimensions and Weight (Approximately) • Net weight with control cabinet: 24.8 t • Dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Type: Horizontal Drive: Hydraulic

Year of construction: 2008, Condition: ready for operation (used), Two similar Battenfeld injection molding machines are available, each with a core pull. 1) Battenfeld HM 1000/750, year of manufacture: 2004, tie bars: 4, clamping force: 1000kN, opening stroke: 500mm, hole spacing extension: by 300mm, min. mold installation height: 250mm, tie bar spacing: 520mm/470mm, clamping table diameter: 125mm, ejector stroke: 150mm, heating capacity: 14kW, injection weight: 400g, screw diameter: 45mm, injection pressure: 2100bar, total output: 36kW, machine weight: approx. 4600kg. Handling included. 2) Battenfeld HM 1000/750, year of manufacture: 2008, tie bars: 4, clamping force: 1000kN, opening stroke: 500mm, min. mold installation height: 250mm, tie bar distance: 470mm/420mm, clamping table diameter: 125mm, ejector stroke: 150mm, heating power: 14kW, injection weight: 500g, screw diameter: 50mm, injection pressure: 1714bar, total power: 36kW, machine weight: approx. 4600kg. Documentation available. On-site inspection is possible. Cjlimwqov Tnzde Nogt

Condition: like new (used), Year of construction: 2015, SERVO machine Cgslimwsvf Hvkoq Net Clamping force: 350 ton Max opening: 730 mm Min. mold height: 350 mm Max. mold height: 745 mm Plates dimensions: 1040 x 1060 mm Distance between tie bars: 720 x 720 mm Screw diameter: 70 mm Injection pressure: 1877 bar Injection volume: 1212 cm³ Shot weight: 1103 g Machine has only: 27,000 hours 2 x core pullers on moving platten 12 x hot runners New screw in 2017 30% glass

Year of construction: 1998, Condition: ready for operation (used), Two injection molding machines are available. 1) Battenfeld BA 2700/1200 BK, year of manufacture: 1998, clamping force: 2700kN, platen dimensions X/Y: 900mm/1020mm, tie bar distance X/Y: 630mm/630mm, opening stroke: 550mm, mold height min./max.: 250mm/620mm, max. platen distance: 1170mm, ejector stroke: 160mm. Screw diameter: 55mm, L/D ratio: 22, injection pressure: 1305bar, stroke volume: 913cm³, injection weight: 830g. Machine dimensions X/Y/Z: approx. 6800mm/1900mm/3400mm, weight: approx. 12000kg, control: Unilog 4000, operating hours: approx. 40759h. The machine exhibits faults when switching over. 2) Engel ES 200/45 HLS, year of construction: 1998, clamping force: 45t, platen dimensions X/Y: 550mm/430mm, min. installation height: 180mm, platen distance: 530mm, opening stroke: 350mm, ejector stroke: 100mm. Screw diameter: 25mm, stroke volume: 99cm³, injection pressure: 1400bar, L/D ratio: 20, screw stroke: 140mm. Machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 3300kg, operating hours: 74165h. The machine has slight leaks in the hydraulics. Documentation available. On-site inspection is possible. Individual sale possible. Cjlev Sufaoimwq Negt

Condition: ready for operation (used), Year of construction: 1980, An Arburg ALLROUNDER 305-210-700 injection molding machine is available. Clamping force: 700kN, min. mold installation height: approx. 200mm, ejector stroke: 35mm, injection weight: 24g, screw diameter: 30mm, injection pressure: 100bar. Documentation available. On-site inspection is possible. Cjlimwehbhy Req Njgt