Condition: good (used), Year of construction: 2006, Functionality: fully functional, clamping force: 750 kN, screw diameter: 30 mm, injection pressure: 2.4 bar, injection weight: 113 g, mold height (min.): 235 mm, ejector force: 373 N, ejector stroke: 100 mm, total length: 3,830 mm, total width: 1,265 mm, total height: 2,315 mm, overall weight: 5,850 kg, pressure: 2.4 bar, Equipment: documentation/manual, Currently on stock ready for shipping: 2 machines. Comes with a new screw. Ceb Ezdjubzkvoagsgt price is without transport/shipping! For more questions/information please contact. We do have more machines in stock, but these will have a longer delivery time.

Condition: used, Year of construction: 2001, operating hours: 140,000 h, Functionality: fully functional, Equipment: documentation/manual, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. Cgeb Eev R E Icjzdagot No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), Year of construction: 2015, Clamping force: 180 t Screw diameter: 35 mm Shot volume: 154 cm3 Type: Horizontal Drive: Hydraulic Controll CC200 Engel Viper 40 Linear Robot Engel Rotofeeder BMC50 Machine was using DUROPLAST MATERIAL Cob Eevplycjzdagogt has proportional valves for the cap, injection, ejector, 3 x cores and controlled 2 hydraulic servo pumps Approx 30.000 hours

Year of construction: 2019, Condition: used, overall weight: 140 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Cjb Ezdaov D N Ndegsgt

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Cgoborp Dyre Ezdagot Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2000, This Dr. Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2000 and has relatively few working hours for its age. - Brand: Dr.Boy GmbH & Co.KG - Model: 30M - Year of construction: 2000 - Closing force: 30 T - Screw diameter: 28 mm - Shot volume: 55 cm³ Cgeb Ezdaou Aqpyjgot - Injection pressure max: 1.340 bar

Year of construction: 2001, Condition: excellent (used), Year of manufacture 2001 Closing force 50 ton Screw diameter 25 mm Injection pressure 2000 bar Shot weight. 54 gr Core pulls 4 Cgjb Ezdjf Tiq Ssagjt

Condition: excellent (used), Year of construction: 2007, Engel VC 200/40 TECH injection molding machine Year of production - 2007 Control - CC 200 Cgjb Ejwa S Uaozdagst Closing unit: Closing force [kN] - 400 Clamping plate dimensions (hxv) [mm] -550 x 430 Min./max. mold height [mm] min -180 Maximum opening width [mm]- 530 Injection unit Screw diameter [mm] -30 Injection volume [cm3]- 99 Injection pressure [bar]- 1451 Electric-hydraulic equipment Pump motor rated power [kW] 15 Dimensions and weight: Net weight with control cabinet [t]- 2.7 Dimensions (length x width x height) [m] -3.26m x 1.2m x 1.8m

Condition: excellent (used), Year of construction: 2008, Demag System 500/900-3300 (2008) Clamping unit Clamping force: 500 tons Platten dimension: 1300 x 1200 mm Distance between tie bars: 900 x 800 mm Mold height min. : 440 mm Mold height max. 880 mm Injection unit Screw diameter: 80 mm Injection pressure: 1855 bar Injection volume: 1779 cm3 Shot weight: 1620 g Transport dimensions Dimensions: 8,7 m x 2.3 m x 2,5 m Weight (clamping unit/injection unit): 16.500/5.400 kg 4x Core pullers Cascade control 2-way hydraulic EUROMAP 67 interface Additional connections for 2 core pulls on the fixed tool clamping plate Cgjbjukku Ro Ezdaget 10-way cooling water flow regulator with temperature display Additional nozzle controller; 1 circuit; PID controller

Condition: like new (used), Year of construction: 2021, operating hours: 1,245 h, Functionality: fully functional, clamping force: 8,000 kN, screw diameter: 70 mm, clearance between the columns: 1,080 mm, displacement volume: 1,424 cm³, injection weight: 1,296 g, total length: 11,100 mm, total width: 2,730 mm, total height: 3,030 mm, TEDERIC electric injection press 808 T Year: 2021 1245 hours of operation Cgsb Ezevza T Isdaget Reference DE808 Screw diameter: 70 mm L/D ratio: 22 Injectable volume: 1424 cm3 Injectable weight in PS: 1296 gr Screw rotation speed: 180 rpm Injection speed: 160 mm/s Total power: 177 KW Distance between columns: 1080 x 1080 mm Mold thickness: 420-1000 mm Closing stroke: 1000 mm Machine weight: 49 T 4 hydraulic cores

Condition: used, Year of construction: 2013, operating hours: 33,000 h, clamping force: 55 kN, screw diameter: 32 mm, displacement volume: 965 cm³, injection pressure: 2,127 bar, overall weight: 2,300 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Manufacturer: BOY Type: BOY 55E Condition: technisch überarbeitet Operating hours: ca. 33.000 CLAMPING UNIT: - Clamping force: 55 t Öffnungsweg: 400 mm Mould installation height min.: 250 mm Mould installation height max.: - Tie bar distance (h x v): 360 x 335 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: IU205 Screw diameter: 32 mm Injection weight in polystyrol: 92,3 g Stroke volume: 96,5 cm³ Einspritzdruck: 2.127 bar CONTROL: PROCAN ALPHA Screen language: DE / EN / IT / ES Operating manuel: DE EQUIPMENT: - Core pulls: - Air valves: 1x (Steuerung) Hot runner control devices: - Robot interface: Euromap 67 GENERAL DATA: - Installed heating capacity: 7,7 kW Cjb Ezdastug Thjgjgt Pump drive power: 11,0 kW Total installed power: 18,7 kW Total weight: 2.300 kg Total size L x B x H: 3,5 x 1,2 x 2,1 m

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ Csbjtpf N Ue Ezdagjgt - Clamping force: 55T - Working hours: 24,210

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 300-2000 CX- Hybryd injection molding machine Year of production -2019 Number of operating hours - 19,000 Fully hydraulic closing system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 19" control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 70 mm, with a non-return lock and an open nozzle Closing unit - Mold closing force: kN 3000 - Mold opening force: kN 169 - Dimensions of the mounting plate (h x v): mm995 x 1050 Ceb Eowa S Imszdagsgt - Clearance between columns (h x v): mm630 x 630 Increased width of the mold mounting plates and increased horizontal clearance between columns KM 300 by 80 mm; Clearance after enlargement: 710 x 630 mm ( h x v) - Mold opening stroke: mm820 - Minimum height mold:mm330 Increased by 150 mm min. mold height and max. opening width - Opening width: mm1150 - Ejector stroke: mm200 - Ejector force forward/backward: kN 58/28 Injection unit - Screw diameter:mm 70 Thermoplastic HPS-UN screw for high-performance applications - 70 mm Screw drive by electric motor for independent and energy-saving plasticization during mold opening and closing - Ls/D ratio: -20.0 - Injection pressure:bar 1877 - Injection volume:cm3 1078 - Injection weight 1): g 981 - Injection speed: mm/s100 - Injection efficiency:cm3/s385 - Screw speed, standard:rpm220 - Efficiency plasticization 1): - at standard screw speed: g/s 75.8 Pressure tank for increased injection power switched off by machine control Additional pump for hydraulic ejector and core function. For parallel movements of hydraulic elements during mold opening and closing, as well as pressure maintenance function for hydraulic cores. Electric-hydraulic equipment - Nominal power of the pump motor:kW 55 - Installed power of the heaters:kW 29.2 - Number of cylinder heating zones: -6 - Dry cycle time / stroke according to Euromap 6 2) :s/mm 2.7 / 441 - Oil tank capacity: dm3 720 Dimensions and weight - Net weight with control cabinet: t 20.1 - Machine dimensions (length x width x height) 3):m 6.55 x 2.17 x 2.25

Year of construction: 2022, Condition: as good as new (ex-display), This injection molding machine from Dr. Boy is in good condition. The machine is from 2022 and has few working hours. – Brand: Dr. Boy – Model: XS – Year of construction: 2022 – Screw diameter: 18 mm Cob Ezdjmf U Uvjagogt – Shot volume: 15.3 cm³ – Closing force: 10 T – Working hours: < 25

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 650/150 injection molding machine Year of manufacture - 2005 Ceb Ejwa S Dzjzdagsgt Clamping system Clamping force: 1500 kN Plate size h x v: 750 x 750 mm Min. installation height: 300 mm Maximum plate distance: 900 mm Opening stroke: 600 mm Ejector stroke: 150 mm Ejector force: 61 kN Centring of moving platen D: 160 mm Centring of fixed platen D: 160 mm Mould weight: 1800 kg Injection system Screw diameter: 45 mm Stroke volume: 318 ccm Injection pressure: 1525 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 290 min Screw torque: 5 N Plasticizing flow: 55 g/s PS Number of heating zones: 5 Dimensions and weight Machine dimensions LxWxH: 5.5m x 1.7m x 2.4m Total weight: 9500 kg

Condition: like new (used), Year of construction: 2024, operating hours: 20 h, Brand: Dr.Boy GmbH & Co.KG Model: BOY XS E Year of construction: 2024 Closing force: 10 T Screw diameter: 18 mm Shot volume: 15.3 cm³ Cgjb Ezsu Tqmwsdaget Working hours: < 25

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 35 - 100 CX injection molding machine Csb Ezdswa Szgeagegt Year of manufacture - 2007 Closing system : Clamping force: 350 kN Mould opening force, max.: 39.9 kN Moving platen feed force Opening: 21.6 kN Moving platen feed force Closing: 16.7 kN Mould platen size (h x v): 540 mm x 540 mm Distance between connecting rods (h x v): 320 mm x 320 mm Mould opening stroke: 350 mm Min. mould height: 175 mm Max. daylight: 525 mm Hydraulic ejector - stroke: 100 mm Ejector force forward/backward: 22.6 / 9.9 kN Injection unit : Screw diameter: 22mm Ls/D ratio: 26 Injection pressure: 2500 bar Injection volume 38 ccm Injection weight, PS: 35 g Injection speed: 59 ccm/s Screw speed: 365 1/min Tank capacity: 215 ltr. Dimensions and weight Machine dimensions: 3.50 m x 1.50 m x 2.00 m

Year of construction: 1996, operating hours: 24,222 h, Condition: good (used), This Dr. Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. Cgjb Eopwh Akezdaget - Brand: Dr Boy - Model: 80M - Year of construction: 1996 - Screw diameter: 42mm - Shot volume: 200 cm³ - Clamping force: 80T - Working hours: 24,222

Condition: excellent (used), Year of construction: 2004, Arburg 420C 1000-250 injection molding machine Year of production: 2004 Injection elements: Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Injection volume: 188 ccm Closing elements: Closing force: 100 t Clearance between columns: 420x420 mm Table plate dimensions max: 570x570 mm Ejector: hydraulic Closing system: hydraulic Cgeb Ezowa Sx Eodagst Control: SELOGICA Dimensions: Weight: 3660 kg Length/Width/Height: 4.30x1.64x2.08 m

Condition: good (used), Year of construction: 1999, operating hours: 37,400 h, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 78 cm³, injection pressure: 2.2 bar, overall weight: 2,350 kg, This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. Ceb Esrg Hcyezdagogt - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 160-380 CX injection molding machine Year of production - 2005 Number of operating hours - 34,200 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and 3 built-in USB ports. Plasticizing system A complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 40 mm, with a non-return lock and an open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit - Mold closing force: kN 1600 - Mold opening force: kN 86.4 - Dimensions of the mounting plate (h x v): mm 820 x 845 - Clearance between columns (h x v): mm 520 x 520 - Mold opening path: mm 650 - Mold installation height: mm 300 - Plate opening stroke: mm 950 - Ejector stroke: mm 150 - Ejector force: kN 22.6/9.9 Injection unit - Screw diameter: mm 40 - Pressure injection: bar 1860 - Injection volume: cm3 201 - Injection weight for PS: g 183 - Number of screw revolutions, standard, option: rpm 390/490 Electric-hydraulic equipment - Nominal power of the pump motor: kW 22 - Installed power of heaters: kW 10.97 - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 1600 - Oil tank capacity: l 489 Dimensions and weight Cob Eewa Svkezdagjgt - Net weight with control cabinet: t 6.0 - Machine dimensions (length x width x height): m 4.6 x 1.6 x 2.1

Condition: good (used), Year of construction: 2001, operating hours: 37,400 h, machine/vehicle number: #183455, clamping force: 1 kN, screw diameter: 45 mm, displacement volume: 230 cm³, injection pressure: 1.67 bar, overall weight: 5,100 kg, This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ - Working hours: 58,700 Cgoborg Hdls Ezdagot

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 50-380 CX injection molding machine Year of production - 2010 Number of operating hours -: 62135 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and built-in 3 USB ports. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasive protection, with a screw diameter of 35 mm, with a non-return lock and an open nozzle Tool closing system: - Mold closing force: kN 500 - Mold opening force: kN 39.9 - Mould mounting plate movement force - - -- opening: kN 21.6 -- closing: kN 16.7 - Mounting plate dimensions (h x v): mm 600 x 600 - Clearance between columns (h x v): mm 370 x 370 - Mold opening path: mm 400 - Mold installation height: mm 200 - Plate opening stroke: mm 600 - Ejector stroke: mm 100 - Ejector force: kN 22.6/9.9 Unit injection - Screw diameter: mm 35 - Injection pressure: bar 2429 - Injection volume: cm3 154 - Injection weight for PS: g 140 - Screw speed, standard, option: rpm 295/375 Equipment: - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 2900 - Oil tank capacity: 1 220 Power supply: - Nominal power of the pump motor: kW 15 - Installed power of the heaters: kW 10.97 Cob Ezdaowa Si Dsgsgt Machine dimensions and weight: - Net weight with control cabinet: t 3.0 - Machine dimensions (length x width x height): m 3.8 x 1.4 x 2.0

Condition: excellent (used), Year of construction: 2005, BOY 22A injection molding machine Year of production: 2005 Vertical / horizontal machine Technical data Screw diameter: 22 mm Injection volume: 30 ccm Weight: 28.45 g Injection pressure: 1732 bar Closing force: 220 kN Tie bar spacing: 254 mm Plate size: 220 x 400 mm Min mold height: 200 mm Cgsb Ezswa Sbyjdaget Opening stroke: 200 mm Max plate spacing: 400 mm General Installed power: 9.05 kW Operating hours: 21,600 h Dimensions: Weight: 880 kg Equipment Monitor language: German

Condition: excellent (used), Year of construction: 2003, Arburg 221 K 350 - 100 injection molding machine Year of manufacture: 12/2003 Horizontal/vertical machine - stand-up unit Control type: Selogica Closing system: Knee TECHNICAL DATA Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min 150 mm - 300 mm Maximum opening stroke: 200 mm Max distance between plates: 350 mm - 500 mm Cob Ezdowa R T Ieagjgt Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2400 bar GENERAL DATA Engine: 7.5 kW Heaters: 3.5 kW Operating hours: approx. 47,000 h Dimensions L x W x H: 2.7 m x 1.4 m x 1.7 m Weight: 1150 kg