Injection moulding machine

Arburg 420C 1000-250 VU

Condition: good (used), Year of construction: 1982, functionality: fully functional, type of input current: three-phase, MCS Jigger High Temperature 144ºC. Type COMBY-JIGGER JP70. Year 1982. Gbedpfx Agsfqmx Tj Rsg It underwent a complete renovation in 2002 Pressure: 3kg/cm2 Capacity: 9170 l Roller width 2,000 mm. Diameter of fabric 1100 mm. Diameter of rollers 324 mm. Additives tank.

Condition: ready for operation (used), Forklift truck Manufacturer: Jumbo Type: J60 DC12 Diesel Year of manufacture 1994 Payload: 6,000 kg Own weight: 9,260 kg Lifting height: 4300 mm approx. 25,000 operating hours Sold due to switching to wheel loader All service and lubrication intervals verifiably completed according to the inspection book! All filters (hydraulic, fuel, converter, air) replaced annually. Engine oil filter including oil every 250 operating hours. Gbjdpfxevtwuas Ag Rjg Only B0 was used as diesel fuel. (no B7) immediately available - fully functional Location: Austria, near St. Pölten

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Gsdpfx Aexlkq Ueg Rebg Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Year of construction: 2023, condition: new, Nitrogen self-generation plant for the production of a wide range of purities, pressures and volume flows. Consisting of high-quality components, such as filters, adsorbers, nitrogen separation unit of the company Parker Hannifin and the compressor manufacturer Käser. If you need high pressure compression we cooperate with Bauer Kompressoren. More than 400 units have been installed at our customers. Gz7iapb Gbedpfsnq Di Tex Ag Rsg All plants are assembled by us and adapted according to your space conditions and needs. We also plan and realize container plants for outdoor and indoor installation. We are looking forward to your inquiries...

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Godpfx Aorthkueg Robg Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350BJ 2003Sleisskraft 130 TOScrow 40 mmOperating hours 77890 hHolmenabstand 42x42 Gbedsd Tnbhepfx Ag Reg

Condition: used, Year of construction: 2014, workpiece length 100 mm swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm grinding wheel hole diameter 32 grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t Gbedovx Uvfspfx Ag Rsg dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately).

Condition: like new (used), Year of construction: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. distance between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Mould platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main drive power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Gedpfxjw Aw Tas Ag Rebg Robot fully integrated with the machine – operated via the machine control panel Machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical sectors). Machine is still powered, test possible. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operation video, technical documentation, and arrange a convenient date for a visit.

Condition: used, Year of construction: 2000, operating hours: 144,381 h, functionality: fully functional, clamping force: 2,000 kN, For sale is an injection molding machine of the Arburg brand and type 520 C 2000-675 Gbedpfx Agou Uuakj Rsg Technical data Year of construction: 2000 Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2003, operating hours: 43,000 h, condition: repair required (used), machine/vehicle number: HBC 140 2x75kW 2003 (W230-005), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2003 Hardox bottom floor plate only Plastic valve Anti-rat cabling Hours 43.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Godpfx Agskcgyno Rebg Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.