base plate: 210x110 mm weight of the machine approx.: 60 kg space requirements of the machine approx.: 0,7x0,52x0,5 m Yqbzw0 copy device for grinding machines for grinding wheel forming ( profile device) details: - adjustment travel upper table longitudinal=60mm (manual) - transverse travel = 20mm - under frame=approx. 60mm ( lockable) - template table size 310x150mm perfect used condition
Serial No. 19470 Centre height 400mm Distance tailstock to faceplate 3000mm Ptziei Swing over bed 850mm Swing over saddle 650mm Maximum diameter held in steadies 250mm Minimum distance between centres 170mm Input 380/3/50 ac 14 kW Spindle speeds 1.2-38 rpm Equipment "Rank Mikop" Hydraulic Copying Attachment Model R180 Length 22'8" / 6.91m Width 6'6" / 1.98m Height 5' / 1.52m Nett weight 8.43 ton / 8560 kgs Comments ***Video shows the machine under power***
Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine Nn8g2 -For machining: of aluminum and steel profiles -Motor: 0.75 kW 6,000/12,000 rpm -Dimensions: 1500/800/H1420 mm -Weight: 114 kg
x-travel 2000 mm y-travel 1000 mm z-travel 800 mm spindle turning speed range 4 Stufen von spindle turning speed range 20 - 3150 U/min spindle taper SK 60 + SK 50 milling head -swivable +/- 45 ° copying travel - horizontal/cross 300 mm copying travel face 200 mm distance spindle /table 200 bis 1000 mm distance spindle center to column 1120 mm table surface area 4400 x 1000 mm table load capacity 8000 kp total power requirement 30 kW weight of the machine ca. 56 t dimensions of the machine ...
Serial No. AT 471 443 Capacity 1200 mm swing x 2000 mm between centres Table swivels 6 degrees - 0 - 6 degrees Table traverse speed hydraulically variable Work head input 5 hp Work head speeds 10 - 90 rpm Wheel head input 25 hp approx Wheel head infeed rate variable Nnjg9 Nominal stone size 1200 mm diameter x 95 mm wide Internal grinding attachment input powered swing down type Input 380/3/50 Fitted with coolant Length 21' Width 10' 4" Height 8' 8" Nett weight actual. 23,640 Kgs. / 23.26 Tons.
Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg Bjszpd3r
used manufactured by Frommia type FS 60 built in 1973 Masch.-No. 3 / 22 motor 1,5 / 2,2 kW with postformer 2,8 kW 2 revs 1200 / 1800 U/min table size 750 x 750 stand range 600 mm Collet chuck with collets 16 mm required space ca. 1200 mm x 1200 mm x 1600 mm located in 97447 Gerolzhofen sale in current condition as seen - free on truck - Cqzgqp0s
NC Attachment table Ø 560 mm The NC top table can be used vertically as well as horizontally Lrqg30d2 THE NC ADD-ON TABLE FITS ON A COVER MAHO DMU 60 T , DMU 80 T , DMU 100 T ! THE NC ADD-ON TABLE IS IN A VERY GOOD CONDITION !
Contactor, semiconductor contactor, contactor, power contactor, illuminated pushbutton, indicator light approach -Square D: indicator light attachment D1V1W -Diameter: 22 -Price: per piece -Number: 100 pieces -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece Vt027m
Second-hand machineBuilt: 2000Copying undermilling machineOutreach 500 mmMachine size 910 x 600 mmSpindle drive Motor 2,2 kW, 230 VMechanically operated spindle stroke via foot pedalDepth stop of turret with three positionsRequired suction capacity: 500 m³/hmax. workpiece thickness: 100 mmWeight: approx. 160 kgAvailability: short-termLocation: Hochheim Ogirx
We are ACCEPTING OFFERS for this unit! Visit our website EQUIPPO and send us your best offer now. Bdpt7gl3q Buying with Equippo is easy: • Fully inspected machines • Delivered to your jobsite • Money Back Guaranteed • Safe payment methods with possibility to pay at delivery 2005 - Erkat ER 1500 XL | Used Rotary Drum Cutter Attachment for 20t to 40t Excavators with quick coupler support. CE marked: No EPA marked: No 5 Inspection points 5 Approved 0 Imperfections 0 Issues Visit EQUIPPO to see t...
Contactor, semiconductor contactor, contactor, power contactor, illuminated pushbutton, indicator light approach -Square D: indicator light attachment D1V1Y -Diameter: 22 -Price: per piece -Number: 40 pieces Hynjuzr -Dimensions: 50/40/H55 mm -Weight: 0.05 kg/piece
used, good condition Make Cosma Type RF6 Motor 3.0 kW Number of milling heads 8 pieces Working width 500 mm Weight approx. 600 kg For the efficient mass production of straight-axis profile bars of round, Any oval or angular cross-section. It can also work pieces can be made with 2 different cross-sections. The rods can be cylindrical (prismatic), conical or profiled. Osa27 Softwood / hardwood or plastic are processed. Products: Round and oval hammer handles, straight and shaped, Edged ladder...
OFFER 21124 Technical data: Btlcahu2gq - Operation by two-hand lever - Material clamping by pneumatic clamping cylinder - Profile height / profile width max. approx. 150 x 150 mm - Vertical milling unit : - milling length / milling width / milling stroke 290 x 100 x 120 mm - Horizontal milling unit : - milling length / milling width / milling stroke 270 x 90 x 120 mm - Spindle speed 12000 rpm - Dosing spraying device - Air consumption per working cycle - without spraying 12 ltr - with spray...
engraving and copy milling machine Kuhlmann GM 11 / 3D factory no.: 01.0045 Type: GM 11 / 3D Technical data: Pantograph setting 1:1.5 to 1:10 working table 350 x 200 mm Boxqjeg2xb Work table longitudinal travel 185 mm Work table cross travel 390 mm Work table height adjustment 375 mm model table 500 x 320 mm Drive 450-9800: with pole-changing switch 450-19500 rpm Dimensions L x W x H 500 x 475 x 1530 mm Weight approx. 700 kg
Poreba TR-70C Sliding gap. (Gap can be extended for about 210 mm more than in the pictures.) Centre height: 350 mm. Swing in gap: Approximately 1300-1350 mm. Gap length: 200-600 mm. (Approximately) Bw9v7jnq Turning diameter over the bed slide: Ø700 mm. Main spindle bore: Ø 81 mm. Hydraulic copy attachment. Net weight: Approximately 4,500 kg. 380V 50Hz I can arrange transport in Eurotrailer in all of Europe. Or in container all over the World.
Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Manufacturer: Rotox copy router KF 454 -Handover: as is as seen -Damage: spindle housing, see photo -Motor: 0.85/1.1 kW Coqpzhh -Speed: 1360/2750 rpm -Adjustment dimensions: see photos -Dimensions: 1050/735/H1460 mm -Weight 174 kg
working width: 800 mm working height: 300 mm min. Workpiece length: 250 mm aggregate: 2 Units seperatly adjustable 1. brush: Metalbrush diameter 220mm 2. brush: Tynexbrush, grit 80, diameter 220mm Yxgxe0t2 height adjustment: manual read out workpiece thickness: mechanical counter feed speed: 4 - 12 m/min motor power brushes: 2 x 5,5 kW motor power feed: 0,37 kW machine length: 1400mm machine width: 1500mm waight: 950kg
used, good condition manufactured by Hess Masch.-No. 2022 motor 1,5 / 2,2 kW postformer 200/300 HZ 2 revs 11350 / 17400 rpm collet receiver MK 1 head tiltable 45° motor 2 revs/motor pole switch 11350 + 17400 table size 740 x 700 mm stand range ca. 590 mm located in 97447 Gerolzhofen sale in current condition - free on truck - Chai73ry
round table with direct and scale division pivoted clamping table size of clamping table 600 x 350 mm table height 500 mm manual drive of round table by hand crank back and forth movement for direct and indirect division locking of division by clamp screw - every 15° by bolt fixing swiveling of clamping plate by handwheel locking of clamping plate by clamp srews through bore in round table 100 mm space requirements depth - 550 x width - 500 x height - 700 Bspzxmgkhu mm weight approx....
sell double copy router BACCI Hehhifjz ideal machine for single- or double-sided copying of profiles / welds on balcony boards, facings Special feature of the machine is that there is no limit to the working length. The wood to be processed can be pushed through further, the machine copies the desired profile on the clamped template.
Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -For machining: of aluminum and steel profiles -with 1 vertical and 1 horizontal milling motor -per motor: 0.74 kW 12,000 rpm -Installation dimensions 2800/1100/H1630 mm -ransport dimensions 800/1200/H1630 mm -Weight: 270 kg Mvvosw
The machine is very little used. Ersatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual ...
4th and 5th knife attachment for Trimmer Müller Martini Year 1999 - Serial-No. DSS 2609 -We would be very pleased with your visit - more machines on Stock- -Available Immediately- -Can be inspect- Zvgktplp -On Stock Emskirchen / Nürnb
Toolroom lathe Weiler Primus Centre distance: 450mm Centre height: 120mm Spindlebore: 25mm 2rkotm Spindelspeeds: 60-3000 RPM Bench top model Multifix QCTP Some collets incl. sleeve and drawbar 3-Jaw scroll chuck with inner ans outer jaws Milling attachment: 85-2200 RPM Quill with MT2 Head can rotate Incl toolholder up to 16mm shaft The machine is cleaned and tested
Absolute rotary encoders, encoders, rotary encoders, encoders, incremental encoders -Manufacturer: Balluff, Incremental Encoder from Lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// -Price: complete Bqjwk8gnyc -Dimension: 100/90/80 mm -Weight: 4,3 kg
Used bread roll machine Fortuna GSTA Head machine KM 5 5-row weight range 35-80 gram hourly output 6000 pcs. for Kaiser and salt rolls with pretzel discharge On request we will be pleased to send you videos of the plant at work. Bizaebtyhx Sale alternatively - ex stock in baker's condition - ex stock, cleaned, with new troughs delivery free bakery also possible
For rational, fast and above all simple processing of square rolls, grain rolls, rye rolls, ciabatta, special rolls. Gentle processing of the dough. Part range: approx. 30 - 500 gr. item number: 2513 Manufacturer: König/ Lippelt Serial number: 10240/ PP/ 1035 Year of manufacture: 1998 3 x 400 V + 3 N , 1,1 kW - belt grinder with infeed belt - various cutting rollers (see photos) - TAPES NEW! Mohner/ seeding Lippelt No. 074-1999 0,218 kW - Water pump new; - completely cleaned, technically checke...
Two spindle copy milling machine for milling lock cylinders, handle holes etc. E73ypyzui Suitable for aluminium and steel profiles. Vertical and horizontal milling. 4x pneumatic clamping cylinders. Infeed and outfeed track with stop. 380/ 400 Volt
Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Manufacturer: elumatec, 1-spindle copy router -Type: AS 70/44 -Motor: 0.74 kW -Spindle: 12000 rpm Bpwlyhvamo -Workpiece clamping: pneumatic -Workpiece supports: with stops, total width 4430 mm -Transport dimensions: 1200/800/H1500 mm -Weight: 158 kg